Report crashes when table having lots of columns and rows, please help

Hi, Everyone,
Our system is Apex 4.0.2 with Oracle 11GR2 and Oracle HTTP server in the middle.
We have a very simple report drawing data from a table with 46 columns ( no binary data) , when the maximun rows is 500, everything is fine; but if I increase the maximum rows to 500000, it crashes repeatedly. We are doing third party database integration , our goal is using Apex simple reports with CSV exporting capability to export tables into text files which can be imported by other databases. I know there are other ways to export table into CSV file, but APEX report seems very easy to use, best of all, non programmers can use it too....
Our experience shows that: if the table has few columns, like 10 columns, we can use report to dump large number of rows like 200000, but we can't use APEX report for table with lots of columns. the HTTP server log doesn't show any meaningful information. ( we use the Apex Utilities like UNLOAD data with the same crash result).
Any suggestions are greatly appreciated.

"Disk cannot be read from or written to" error syncing iPod in iTunes.

Similar Messages

FCP CRASHES WHEN I EXPORT TO COMPRESSOR... Please help.

Hello everyone,
I'm trying to export my FCP sequence to compressor through FCP and not through a Self Contained Movie, because I hear it produces better results. I Export to compressor and Compressor loads the project and begins to compress... it gets through the audio, and I would guess 75% of the video and FCP crashes. I've tried to do this now 6 times with the same results.
My project is a Panasonic HD 720P and is about 32 minutes long. I don't know if that info will help, but does anyone have any suggestions?
Thanks guys, and gals...

hi,
i can only guess here as you have not provided any information about the crashing itself. Is it Unexpected Error, then a quit; is it a lock up without an error message?
Things to look for:
1. Check that the sequence is appropriate for the format you are editing... it is likely that it is as FCP auto checks it on first clip assemble. Check anyway.
2. Check that the media you are compressing is COMPLETE.. check each scene in the sequence.. sounds like you may have a dodgy scene/media. This would seem likely if you are experiencing crashing always at the same place during compression.
3. Check to see if you accidently put in any compression markers... take these ALL OUT if you dont need them
4. Check compressor.. compress a small file of the same format (different scenes) to check compressor is functioning. This also may help you narrow down your dodgy media if there is any.
Hope this is of some help.
Good Luck.

Transpose columns into rows-Please Help

Hi,
I have a table(test_data) in following format:
F_P            reference_id first_nm last_nm
EM_NULL                   0         0        0
EM_NOT_NULL               0         0        0
DM_NULL                    1296       145     1689
DM_NOT_NULL               0         0        0I need to transpose the the above table as :
Column_Name   EM_NULL EM_NOT_null DM_null DM_not_null
Reference_ID        0             0    1296           0
first_nm            0             0     145           0
last_nm                 0             0    1689           0I tried below code but unable to get the first column values as reference_id,first_nm,last_nm although I was successful in getting the other column values.Below is the code:
With
lines as (select level line from dual connect by level <= 3),
    cols as (select level col from dual connect by level <= 3)
    select
    max(decode(col, 1,
                      decode(line, 1, to_number('REFERENCE_ID') ,
                                   2, to_number('FIRST_NM'),
                                   3, to_number('LAST_NM')
                                   )))column_name,
    max(decode(col, 2,
                      decode(line, 1, REFERENCE_ID,
                                   2, FIRST_NM,
                                   3, LAST_NM
                                   )))EM_NULL,
         max(decode(col, 3,
                     decode(line, 1, REFERENCE_ID,
                                   2, FIRST_NM,
                                   3, LAST_NM
                                   )))EM_NOT_NULL,
          max(decode(col, 4,
                     decode(line, 1, REFERENCE_ID,
                                  2, FIRST_NM,
                                   3, LAST_NM
                                   )))DM_NULL,
          max(decode(col, 5,
                     decode(line, 1, REFERENCE_ID,
                                   2, FIRST_NM,
                                   3, LAST_NM
                                   )))DM_NULL
   from lines, cols,
        (select rownum rn, TEST_DATA.* from Test_Data)
   where rn = col
   group by line
   order by lineBut since my 1st column values are character its not allowing me the group by function.
Edited by: BluShadow on 23-Sep-2011 08:31
formatted and added {noformat}{noformat} tags.

I think you want something like this...
SQL> ed
Wrote file afiedt.buf
1 with test_data as (select 'EM_NULL' as f_p, 0 as reference_id, 0 as first_nm, 0 as last_nm from dual union all
2                     select 'EM_NOT_NULL', 0, 0, 0 from dual union all
3                     select 'DM_NULL', 1296, 145, 1689 from dual union all
4                     select 'DM_NOT_NULL', 0, 0, 0 from dual)
5 --
6 -- end of test data
7 --
8 select decode(rn,1,'Reference_ID',2,'first_nm',3,'last_nm') as Column_name
9        ,max(decode(f_p,'EM_NULL',decode(rn,1,reference_id,2,first_nm,3,last_nm))) as EM_NULL
10        ,max(decode(f_p,'EM_NOT_NULL',decode(rn,1,reference_id,2,first_nm,3,last_nm))) as EM_NOT_NULL
11        ,max(decode(f_p,'DM_NULL',decode(rn,1,reference_id,2,first_nm,3,last_nm))) as DM_NULL
12        ,max(decode(f_p,'DM_NOT_NULL',decode(rn,1,reference_id,2,first_nm,3,last_nm))) as DM_NOT_NULL
13 from test_data, (select rownum rn from dual connect by rownum <= 3)
14 group by decode(rn,1,'Reference_ID',2,'first_nm',3,'last_nm')
15* order by decode(Column_name,'Reference_ID',1,'first_nm',2,3)
SQL> /
COLUMN_NAME     EM_NULL EM_NOT_NULL    DM_NULL DM_NOT_NULL
Reference_ID          0           0       1296           0
first_nm              0           0        145           0
last_nm               0           0       1689           0Unless you're using 11g and then you could look at the new PIVOT/UNPIVOT keywords

Tabular Form based on table with lots of columns - how to avoid scrollbar?

Hi everybody,
I'm an old Forms and VERY new APEX user. My problem is the following: I have to migrate a form application to APEX.
The form is based on a table with lots of columns. In Forms you can spread the data over different tab pages.
How can I realize s.th similar in APEX? I definitely don't want to use a horizontal scroll bar...
Thanks in advance
Hilke

If the primary key is created by the user themselves (which is not recommended, you should have another ID which the user sees which would be the varchar2 and keep the primary key as is, the user really shouldn't ever edit the primary key) then all you need to do is make sure that the table is not populated with a primary key in the wizard and then make sure that you cannot insert a null into your varchar primary key text field.
IF you're doing it this way I would make a validation on the page which would run off a SQL Exists validation, something along the lines of
SELECT <primary key column>
FROM <your table>
WHERE upper(<primary key column>) = upper(<text field containing user input>);
and if it already exists, fire the validation claiming that it already exists and to come up with a new primary key.
Like I said if you really should have a primary key which the database refers to each individual record itself and then have an almost pseudo-primary key that the user can use. For example in the table it would look like this:
TABLE1
table_id (this is the primary key which you should NOT change)
user_table_id (this is the pretend primary key which the user can change)
other_columns
etc
etc
hope this helps in some way

What index is suitable for a table with no unique columns and no primary key

alpha
beta
gamma
col1
col2
col3
100
1
-1
a
b
c
100
1
-2
d
e
f
101
1
-2
t
t
y
102
2
1
j
k
l
Sample data above and below is the dataype for each one of them
alpha datatype- string
beta datatype-integer
gamma datatype-integer
col1,col2,col3 are all string datatypes.
Note:columns are not unique and we would be using alpha,beta,gamma to uniquely identify a record .Now as you see my sample data this is in a table which doesnt have index .I would like to have a index created covering these columns (alpha,beta,gamma) .I
beleive that creating clustered index having covering columns will be better.
What would you recommend the index type should be here in this case.Say data volume is 1 milion records and we always use the alpha,beta,gamma columns when we filiter or query records
what index is suitable for a table with no unique columns and primary key?
col1
col2
col3
Mudassar

Many thanks for your explanation .
When I tried querying using the below query on my heap table the sql server suggested to create NON CLUSTERED INDEX INCLUDING columns ,[beta],[gamma] ,[col1]
,[col2] ,[col3]
SELECT [alpha]
,[beta]
,[gamma]
,[col1]
,[col2]
,[col3]
FROM [TEST].[dbo].[Test]
where [alpha]='10100'
My question is why it didn't suggest Clustered INDEX and chose NON clustered index ?
Mudassar

Select from table in group of columns and generate a sequence number

I have to select data from a table in group of columns and generate a sequence for every group resetting the sequence to start from 1 onwards.
For example:
Data:
Col1 Col2 Col3 Col4
A NA KA 2009-08-13
B NA KA 2009-08-13
C NA KA 2009-08-13
A NA KA 2009-08-13
B NA KA 2009-08-13
A NA KA 2009-08-13
Expected output from Select Statement:
Col1 Col2 Col3 Col4 Seq_No
A NA KA 2009-08-13 1
A NA KA 2009-08-13 2
A NA KA 2009-08-13 3
B NA KA 2009-08-13 1
B NA KA 2009-08-13 2
C NA KA 2009-08-13 1
How can this be possible with a SELECT statement? Is it possible to assign seq numbers for a group of columns and reset it when it changes? In the above example, all columns form the key to generate the seq number
I know it can be done using Stored procedures and that is how I am doing it now by introducing a temporary table.
Can anyone help me in this regard? Please let me know if the question is vague to understand!
Thanks,
Nachi

with t as(select 'A' col1,'NA' col2 ,'KA' col3,'2009-08-13' col4 from dual
union all
select 'B' col1,'NA' col2 ,'KA' col3,'2009-08-13' col4 from dual
union all
select 'C' col1,'NA' col2 ,'KA' col3,'2009-08-13' col4 from dual
union all
select 'A' col1,'NA' col2 ,'KA' col3,'2009-08-13' col4 from dual
union all
select 'B' col1,'NA' col2 ,'KA' col3,'2009-08-13' col4 from dual
union all
select 'A' col1,'NA' col2 ,'KA' col3,'2009-08-13' col4 from dual)
select t.*,row_number() over (partition by col1,col2,col3,col4 order by col1,col2,col3,col4) from tYou can replace partition by col1,col2,col3,col4 with only columns that you need for grouping condition
and also order by you can just do on the column you need.

FREEZE COLUMNS AND ROWS IN WEB REPORT - PLEASE ADVISE ME

Hi Experts,
I have a web template that contains a query. My customer wants to freeze columns and rows in this report like we do in Excel. I know that in BW 3.5 this is not a standard feature of Table item. In forum I have found some messages regarding with this issue. I inserted a JavaScript code that I have found in forum, but this does not help. A codewriter wrote some other JaveScript for example alert(), that works but some part of taken code from forum such as defined functions do not work.
Other solutions advised in forum such as fixing row numbers or column numbers do not fix my problem.
My questions:
1 - In new version of BW, BI 7.0 have this issue with WAD in standard been solved?
2 - Does it really possible at the same time rows and columns to freeze? I want to freeze 2 rows from top, 2 columns from left.
Could anyone have an idea?
Best regards,
Songul

Hello,
This will be implemented with SPS13.
https://websmp204.sap-ag.de/~sapidb/011000358700004483762006E
And before SPS13, i frame is useful to realize what you want to do. Using 2 "Analysis" web item. and display of 1st analysis web item is restricted only thin the header of the table and the 2nd Analysis web item is used as "table". display of this "analysis" is also restricted to 10 - 30 rows.
but this consume hardware resource.
<sample>
           <div style="OVERFLOW: auto; WIDTH: 1000px; HEIGHT: 20px" >
               <bi:ANALYSIS_ITEM name="ANALYSIS_ITEM_2" designwidth="400" designheight="20" >
                   <bi:DATA_PROVIDER_REF value="DP_1" />
                   <bi:NEW_LINES_COUNT value="0" />
                   <bi:NEW_LINES_POSITION value="TOP" />
                   <bi:DATA_ROW_FROM value="1" />
                   <bi:DATA_ROW_TO value="0" />
               </bi:ANALYSIS_ITEM>
           </div>
           <div style="OVERFLOW: auto; WIDTH: 1000px; HEIGHT: 200px" >
               <bi:ANALYSIS_ITEM name="ANALYSIS_ITEM_1" designwidth="400" designheight="200" >
                   <bi:DATA_PROVIDER_REF value="DP_1" />
                   <bi:DATA_COLUMN_FROM value="1" />
                   <bi:DATA_ROW_TO value="0" />
               </bi:ANALYSIS_ITEM>
           </div>
Kind regards,
Masaaki

Excel tables... columns and row formatting after I update the indesign page

When my excel table gets updated in indesign I lose formatting (hight/wide) for the columns&rows. There are 26 columns and each one is a difference size. Do I have to formatting (hight&wide) each column and row every time the excel table is updated?

We have many publications with statistical tables, which are done in excel. We want to try to do some publications with only tables and do it in-house. The problem is when we place the table in indesign and finish formatting the table. We will get a updated table that needs to be updated in indesign. But when we do we update we lose all of the indesign formatting. Fixing the fonts, type size, etc is easy but how do we get back the all column widths.

How to fix skewed table columns and rows after re-import XML

My question is regarding XML Import in InDesign CS3.
I have a XML that has a table of 5 columns and 5 rows, when I import it into InDesign, the table shows up fine with 5 columns and 5 rows. However when I revise my table to have an additional column, and re-import the XML file, the table gets updated, but instead of with an additional column, it gets 'appended' with an additional row instead (InDesign seems to blindly replace each cell from left to right, top to bottom, and ends up with 6 rows instead). The XML file specifies the number of columns and rows (5 and 5 before, 5 and 6 after), why doesn't InDesign recognize it and automatically add a new column when I re-import the file? Is this problem fixed in CS5.5? Is there a script to fix this?
Here is an example of my old XML vs new XML:
Old:
<frame5>
<Table xmlns:aid="http://ns.adobe.com/AdobeInDesign/4.0/" aid:table="table" aid:trows="5" aid:tcols="5">
<Cell aid:table="cell" aid:crows="1" aid:ccols="1"></Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2006</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2005</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2004</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2003</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores at beginning of period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">846</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">805</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">753</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">678</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores opened during the period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">36</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">50</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">59</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">79</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores closed during the period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">13</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">9</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">7</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">4</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Total stores at end of period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">869</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">846</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">805</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">753</Cell>
</Table>
</frame5>
New:
<frame5>
<Table xmlns:aid="http://ns.adobe.com/AdobeInDesign/4.0/"
xmlns:aid5="http://ns.adobe.com/AdobeInDesign/5.0/" aid:table="table" aid:trows="5" aid:tcols="6">
<Cell aid:table="cell" aid:crows="1" aid:ccols="1"></Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2007</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2006</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2005</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2004</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2003</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores at beginning of period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">123</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">846</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">805</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">753</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">678</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores opened during the period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">456</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">36</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">50</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">59</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">79</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores closed during the period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">789</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">13</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">9</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">7</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">4</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Total stores at end of period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">1368</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">869</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">846</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">805</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">753</Cell>
</Table>
</frame5>

What I mean is, right now there is a "workaround" which requires a user to manually add an extra column before re-importing the XML (with an extra column), otherwise the results get skewed. If by providing a script we can simply ask the user to "run" it, it would be a more "acceptable" solution.
Right. So, one solution would be to use Convert Text to Tables. If you find that works for you, then you can script it.
That's why I asked you...
Of course if nothing is required from the user other than simply re-importing, then that would be the best solution.
Well, one could imagine a script that was attached to the re-import command, or to the link update notification, but probably the first step is to get something that works reasonably well without automating it completely. Especially because triggers to run scripts silently can introduce hard-to-debug problems.
Sure we can switch to use "CALS table and see if this works. The question is, why should we need to? In the 2nd XML there is clearly a different "aid:tcols" value, and yet InDesign seems to ignore it and assume the same # of columns? This sounds like an Indesign bug, can someone confirm? Is there any plans to fix this?
Not to be snarky, but do you want it to work or not? There are the tools you have and the tools you wish you had, and you can't really do much with the ones you wish you had. I'm kind of assuming you are looking for a solution today, not a solution in 2013.
Yes, I believe two of us have confirmed this appears to be a bug.
Plans to fix? Well, we can't really tell you. You could try asking Adobe, but that's not easy information to get out. But you can certainly open a support case at http://adobe.com/go/supportportal and ask. It's not like we have special information here...
But you're probably better off filing a bug first, in that same fashion.
But let's assume no one had filed the bug. CS6 is expected in the March/April 2012 timeframe. That means that they're probably just putting the finishing touches on it right now, and it's going to be very difficult to fix things in it now. So then the earliest you'd likely get it fixed in CS6.5/CS7/whatever which presumably comes out by 2Q2013, and that's assuming Adobe decides to fix it...
I also can't find much documentation on how to update my table to a "CALS table", any examples?
Try this thread:
Re: Importing a CALS table into InDesign CS3

How to enter a data into the specified column and row in a created table

Hi,
I want to enter some data to specified column and row in a already created table. Please let me know how to do this.
Regards
Shivakumar Singh

A table is just a 2D array of strings. Keep it in a shift register and use "replace array element" to modify the desired entry programmatically.
If you want to modify it manually and directly from the front panel, make it into a control and type directly into the desired element. (In this case your program would need to write to it using a local variable).
Atttached is a simple example in LabVIEW 7.0 that shows both possibilities.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
ChangeTableEntries.vi ‏41 KB

Increase report size (columns and rows) in portal

Hi all,
Hope someone can help me with this. I don't have any experience administering the reporting portal, hopefully this is an easy question.
The portal displaying BI queries shows only about 10 columns and 10 rows at a time. This is annoying since users have to scroll around to see all the rows and columns. Where can I adjust the number of columns and rows displayed?
Thanks,
M.

Hi M.B.
Open WAD ( Bex Web Application Designer ) in which , you have assigned BI query. follow the steps for changing no of rows & columns.
Step 1.    Properties   - > select Web Items parametes.
Step 2.   select Ananlysis
Step 3.   Scroll down -> paging -> here you can change no of rows & columns.
Hope it will serve your query. If problem solved , closed this thread .
Regards,
Anand Mehrotra.

How to freeze column and row headers of a table

How to freeze column and row headers of a table in jsp and javascript. An example is available in
http://www.massless.org/_tests/grid1/ pls help to find a solutionj
Thanks in anticipation
Sreejesh

At least I don't stop you from that. I also don't see any benefits in this topic.
Success.

Final Cut pro crashes when any effect is click in the effect window HELP!!!

Final Cut pro crashes when any effect is click in the effect window HELP!!!
I have video placed in a sequence and when I go to the effect browser to click on a effect to drop on it the program thinks for a few seconds and then quits. I tried dumping the pref files in the pref folder and it did not work. is there a different method I should try?

#44: FCP acting weird - Trash Prefs
Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://www.fcprescue.com and run it.
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
2) Open the Disk Utility and Repair Permissions.
3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

How to fix Lightroom 5.6 crashing when backing up catalog database (external AND local backup) - Mac 10.9.5

How to fix Lightroom 5.6 from crashing when backing up catalog database (external AND local backup) - Mac 10.9.5
It starts to cue and within 3-4 seconds, the program just crashes hard. As stated, I tried it on local hard drive and external. Same result...
In the destination backup folder, it will copy over one folder, no images.
Thanks ahead of time.
-Dan

Anyone? - (Adobe?!?!?)

Report crashes when table having lots of columns and rows, please help

Similar Messages

Maybe you are looking for