Report Displayed Event?

Is there an event that fires, or a way to trigger something to happen once the report has finished loading and is initially displayed to the user in WinForms (Crystal for VS 13.0.5.891) ? I want to be able to log the occurrence of a report a report execution along with any parameters that were entered, but couldn't find a good way to do this other than logging the instance upon closing the report, which means refreshes won't log, and I only am able to log whatever parameters they entered last... Any direction would be great, I'm writing in C#. Thanks!

As far as the parameters entered, you'd have to create your own parameter screen and capture the values from there. Nothing as far as CR APIs. Re. event when a report is done processing, see this Discussion
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Similar Messages

  • ICR process for Open item recon.(003) - Report Display issue

    Hi All,
    I am facing a problem in the data reconciliation report display.The document number "1212121212" doesn't not exist in the SAP system.But "1212121212" is used as the reference number in the another document which is created in the SAP.
    Legacy data file.
    RCOMP RASSC       DOCNR                ATYPE        RACCT      RTCUR     TSL
    L001     U001     1212121212     C     CCU001     USD     200
    In the data selection process, i am using the following inputs.
    Company code - L001, U001.
    Vendor - CCU001,CCL001.
    Customer - CCU001,CCL001.
    In the data assignment process, i am using the following inputs.
    Company - L001, U001.
    Trading Partner - L001, U001.
    Rule - 300, 400.
    Rule - 300 config.
    200     DOCNR     Document Number     Equal     DOCNR     Document Number
    Rule - 400 config.
    200     DOCNR     Document Number     Equal     REFNR     Reference Number
    In the reconciliation report display (right side bottom page),
    U001->L001->Payables or other way around L001->U001->Receivables (Top Left side).In the either of the two display am able to see two items.
    first item (not expected in the report display, bcoz there is no relevant data present in the legacy file).
    TR.PT PRT.DOC.NO  PR.CUR Amount DGC  Difference  Reference no
    U001 1700036236      USD       500       USD   500          TEST
    The first item exist in the SAP and it is getting selected during the data selection process.
    second item (reconciled and expected in the report display)
    L001     U001     1212121212     C     CCU001     USD     200
    Kindly help.
    Thanks in advance
    Regards,
    Karthik

    Hi Ralph,
    Yes we are having two company codes.your understanding on this point is rite.
    I am using the standard file upload functionality from the presentation server for uploading the non-sap company data.since in the earlier thread i had explained very detail level, so now had made it short.
    The only issue that I am having is that I have just one line item in my upload file and it is from non sap company L001 for trading partner u001. File gets loaded (data selected 1 correctly), Then after all the steps when I am in the last step (reconciliation) I see that line getting reconciled with other line available in U001 with zero difference. That looks good because it is matching as per my rule. but I am also seeing some other open items in U001 that are also getting reconciled with no lines in file with difference equal to their values. They should not show up in the bottom part of reconciliation part at all as they are still open in U001 and should not get reconciled until I put their offsetting lines in upload file from L001. So they should stay at the top right side in simple words I am seeing open items as well in reconciliation portion bottom one even I do not have any lines to reconcile them and they are showing a balance in them as well.
    Thanks in advance.
    Let me know, if you need any more details.
    Regards,
    Karthik

  • Does SAP have report display the history of dunning

    Dear Expert,
    Would like to seek for your help,Does SAP have report display the history of dunning for AR module and what are the T-code and report?
    Please help.
    Regards,
    KH

    Hi
    Dunning status is updated in customer master,you can get the required data from Table LFB5
    hope this will help to some extent
    Thanks
    Kameshwar Rao

  • Report displayed based on Select List condition

    Hello,
    Any help would be appreciated.
    I have a report and a select list, P55_MISSING. The select list contains the column names in the table that the report displays.
    If I select one of the column names, I would like to display all records where that column name is null.
    The sql I have at the moment is:
    select
    "ID",
    "APPLICATION",
    "SHORT_DESCRIPTION",
    "DESCRIPTION",
    "OPC_NET_NAMES",
    "PROCESSING_SCHEDULE",
    "PROCESSING_REGULARITY",
    "PLATFORMS_INVOLVED",
    "UNIX_DIRECTORIES",
    "SOURCE_FILES",
    from "APP_METADATA"
    where :P55_MISSING IS NULL
    If I select 'source files' for example, I would expect to see 3 out of 4 records stored in the table. However, I receive the message 'no data found'.
    Any help would be great. Thank you.

    Hi
    In order to doe this you will have to use dynamic sql (so you have to change your report type to 'SQL Query (PL/SQL Function Body Returning SQL Query)').
    It would then look something like this...
    DECLARE
    l_sql VARCHAR2(32767);
    BEGIN
    l_sql := 'SELECT id,
                     application,
                     short_description,
                     description,
                     opc_net_names,
                     processing_schedule,
                     processing_regularity,
                     platforms_involved,
                     unix_directories,
                     source_file
              FROM   app_metadata
              WHERE ';
    l_sql := l_sql||:P55_MISSING||' IS NULL';
    RETURN l_sql;
    END;Sorry, I can't test this as I don't have your tables.
    Cheers
    Ben

  • Interactive Report Display

    When a report is grouped by one column, is there anyway to have that column display once instead of for each record? I can do this easily in Crystal and we're in the process of loading BI Publisher...just wonder if it's possible in coding the reports directly in the Apex report display.

    Thanks to both of you!!
    Just new learned how to write complex collections (thanks BLARMAN!!) and then the simple stuff I don't know...
    All the best,
    A

  • ICal displaying events that last more than one day?

    Can I change the way iCal displays an event lasting many days (particularly in the Month view)?  For example, if I put in a vacation lasting 1 week, or a conference lasting 3 days.
    I would just like it to look the way it does on my iPad, iPhone, or Google Calendar.  These all display events with a labeled, colored bar spanning the days (the iPhone has dots).
    Hopefully this is just a simple setting change....
    JB

    Hi Stephan,
    I use the following settings:
    1. One Subform that has:
    - Type: Flow content
    - Dir: Top to Bottom
    - "Allow page breaks" checked
    - "Repeat subform .." NOT checked
    2. Within that I have two subforms:
    A. One is used as a one-time header:
    - Type: Position content
    B. Used as the repeating data:
    - Type: Flow content
    - Dir: Western Text
    - "Allow page breaks" checked
    - "Repeat Subform ..." checked
    - Min count=1, Max not checked
    With those settings the table data is spanned across several pages.
    Enjoy,
    Kim

  • Calendar will not display events in month view?

    A few days ago my calendar stopped displaying events in the Month view (where I originally entered them). I can see them in the List view, although I cannot edit them. They are also not visible in the Day view.
    Moreover at the top of the screen where there would normally be a  "+" button to add events and a "calendar" button to view different calendars there is nothing. Only a heading that says "All Calendars" - however I can't find anywhere in settings to view different calendars if I want. Any ideas?

    Well....
    If you find all the .ics files in ~/Library/Calendars/Events
    And then copy them out of ~/Library
    You can import them back into Calendar .... One .... At ..... A ..... Time ......
    Why, Oh Why, did I ever think I wanted to try iCloud? 
    This link may have some useful information for some of you:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudtm.html

  • Can I change the way iCal displays events in Month view?

    I don't like the way iCal in the new OS displays events in Month view.  It's counter intuitive to have the time of the event be at the far right and grayed out.  I find myself staring and slowly scanning down the display just to find out when I have to be at an appointment.  I wish they had stayed with the other display, not only was it much clearer, it also word wrapped so you could see the entire description.  I have blank space at the bottom of the day, and at the same time missing information because of the lack of wrapped text.

    Hi Daniel,
    The option you have there is to change the calendar of the event (currently the "University" calendar in your screen shot) not the colour.  It is the calendars that have colours in iCal not the events.
    To change the calendar colour in OSX 10.7:
    Click Calendars (in the top-left corner of the iCal window), and select the calendar by clicking its name in the Calendars pop-up list.
    Choose Edit > Get Info.
    Choose a new colour from the pop-up menu in the top-right corner of the Info window.
    To customize the colour, choose Other, and then make your colour selections in the Colours window.
    I hope that helps.
    Best wishes
    John M

  • RFKABL00 SAP Report - Display Changes to Vendors

    Hi
    Report: RFKABL00 SAP Report - Display Changes to Vendors
    In R3, we can run this report either from:
    1) SE38 or
    2) "Change Vendor: Initial Screen" (i.e. FK02) -> Environment-> Account Changes-> All Fields-> Environment-> Multiple Display.
    it shows all the updates dates & who changed the information, i wanted to use these info into my Program. but don't know what table its using to fetch update date & time and changed fields. LFA1 has only recent change.
    Can anyone have some idea  what table i can use for these change History.
    Thanks...

    Hi,
    Check table CDHDR and CDPOS for object class KRED.
    Please let me know if you require further help.
    Regards,
    Ganesh Sawant

  • Display events from adjacent months in a SQL calendar?

    Hi,
    I have a SQL calendar I'm using to display events (Apex 4.0.2). In the monthly view, when the first or last week of the month spans adjacent months (e.g., May ends on Tuesday, so the last week spans May and the first four days of June), events from the adjacent months do not display in the calendar. The days and day numbers display as you'd expect, but the events do not, making it appear that there are no events during that time.
    The weekly view does not behave this way; when a week spans two months, events falling during that week all display.
    Is there a way to make the monthly view display events for all calendar days that are shown even if they are not part of the month being displayed?
    Thanks!
    Mike

    If you are familiar with SQL and coming from a 4GL tools background, you might find our ADF Business Components technology helpful since it caters to your current set of skills. See the ADF Learning Center for the different Developer's Guides and Tutorials we have available.
    http://www.oracle.com/technology/products/adf/learnadf.html
    For example, using our ADF BC technology, you would create a view object and paste in the SQL statement you want to perform verbatim as described in section
    5.2, "Creating a Simple, Read-Only View Object" in the ADF Developer's Guide for Forms/4GL Developers.
    If you prefer EJB/Toplink, as we expect advanced J2EE developers will, then hopefully someone else in the forum can chime in to help answer how you would achieve the desired result with that technology as I'm less familiar with that layer myself.

  • The report displays more than 3000 pages with same content.

    Respected Sir
    I have a report with form letter layout.
    The report contains only one page,but while running the paper layout ,the report displays more than 3000 pages with same content.
    please anyone give a solution to this problem

    I think there is no bad joining. b'se when the querry is executed in sql, it is working properly(means returns only one record) . This problem is not for a particular report. Any report using the "form layout", the same problem occurs.
    Why this problem occurs. How can we solve it.
    Bye

  • Currency fields in Salesforce reports display as "[Record]" in Power Query

    Currency fields in Salesforce reports display as [Record] in excel when using power query.    Can include screenshots due to forum rules.

    Thanks - that helped me figure it out.
    IF you right click on the source and click edit to get into edit mode on the query, then you have the option to expand the record.  Doing this and saving does the trick.  
    Will try and post some screenshots later if others run into this.

  • Replacing space with some char in report display

    dear friends
    hw can i replacs space in report display with char .
    there is disply like
                     site 1    site2   site3
    matnr1           space      10        space
    matnr 2            2        space     space
    site in x -axis  ,matnr in -y-axis.
    i want to replace this space  by some char like nd or ns  etc
    can any one give solution....
    regards
    veera

    hi this my condtion .....
    if the first condtion satisfed i have to replace by ND
    which is now mentioning as space.if send condtion satisifed  having 10(na) in display
    loop at it_final1.
                        read table it_final2 into wa_final2 WITH KEY matnr = it_final1-matnr.
                               IT_RESULT-matnr = IT_final1-matnr.
                               IT_RESULT-WERKS = IT_final1-vstel.
                        if it_final1-LFimg = wa_final2-vsolm.
                             it_result-LFimg = 'nd'.
                            ELSEIF IT_FINAL1-LFIMG < WA_FINAL2-VSOLM.
                                 it_result-LFIMG = WA_FINAL2-VSOLM - IT_FINAL1-LFIMG.
                                 ELSEIF WA_FINAL2 IS NOT INITIAL.
                        IT_RESULT-lfimg = IT_final1-lfimg.
                        else.
                        IT_RESULT-lfimg = IT_final1-lfimg.
                                     ENDIF.
                        COLLECT it_result.
        ENDLOOP.

  • Report display problem

    Hello,
    Let's say I have a report with 16 rows in it, with rows 1 - 15 on the first page, and row 16 on the second page. When I delete the 16th row, my report display again, but I am stuck on the second page, and cannot see rows 1 - 15 (although it says they are there). The only way I can get around this is to log out and log back in again.
    I've seen similar postings about this, but I'd like to know if this has been fixed in 2.2?

    Hi,
    I set a button named JUMP on the top of Report Region with Target is a URL.
    Pagination Scheme is Row Ranges X to Y …
    Then into URL target box:
    http://koncomp:8080/apex/f?p=101:36:&SESSION.:pg_R_9285751276404338:NO&pg_min_row=181&pg_max_rows=30&pg_rows_fetched=30
    36 is the same page. My report has approximately 300 rows, 30 on a page.
    When I click on that button the report select exactly rows from 181 to 210.
    I think, it is possible to build similar logic to jump to the exact range, but should be complicated.
    Konstantin

  • Report "Display Text (Based on LOV)" columns don't like colons - Bug?

    This is a bit hard to explain in text, so I've built a sample app: http://apex.oracle.com/pls/otn/f?p=9608:1
    The app has two pages, which demonstrate two related bugs in the handling of Report "Display as Text (based on LOV)" columns.
    Basically, if the LOV query returns a string that contains colon characters (":") in the display column, the values are matched up correctly, but the colons are stripped from the display.
    If the LOV query returns a string that contains colon characters in the return value column, then the matching fails entirely.
    Removing the colon characters eliminates the problem.
    We actually ran into this in a production environment, after an upgrade from Apex 3.0.0 to 3.2.1. The behavior definitely did not occur in Apex 3.0, but was added at some point between the two versions.

    The colon is actually part of our data (the field in question is a URN namespace).
    And yes, I understand the function of the colon in Apex URL parameter passing. However, I wouldn't expect that sort of parsing to be used against the results returned from an LOV query.
    Also, the LOV is fine in of itself -- a select list based on the LOV displays & returns the expected values. It's only when I use a report column based on an LOV that this behavior creeps in.
    We've found a (fairly painful) workaround -- altering both the report query and the LOV query to to do something like replace(column, ':', '_') -- but that's a manual change to a large number of pages for us.
    This behavior is new to version 3.2.1. It didn't happen in version 3.0.

Maybe you are looking for