Report for Inventory Status for Serialized Materials

I am trying to generate a report which would display the material #, all serial #s related to that material and the stock type for each of these serial#s. I currently following this approach, I will fetch all the material number from MARC for a particular plant, then for each MATNR, will check for EQUNR and SERNR in table EQUI. Then for each EQUNR will then check stock type in table EQBS. I believe each EQUNR is associated with one and only one SERNR (AM I CORRECT?). I will then display the MATNR, SERNR and LBBSA on the report. Can somebody tell me if the approach is correct? Just wanted your opinion.
Also I have another issue. Whenever I try to find the stock type for a particular EQUNR in table EQBS, it gives a message saying that no data exists for this EQUNR in this table. I wanted to know what could be the possible reasons for this. I am currently investigating on the following reasons, 1. I think the material is flagged for deletion so that all the EQUNRs and SERNRs associated with that material will be deleted. However, I don’t know how to see all the material associated with a particular EQUNR? Another reason I think is that that EQUNR, or that SERNR does not have any quantity in SAP so no stock type. I could be wrong, but still searching. Can you think of something which could cause this problem (i.e. the message saying that no data exists for this EQUNR in table EQBS?)
Thank you for your help.

Hello Azz,
Have you tried transaction code IQ09 report? I this this will meet your requirement to some extent.
Regards
Arif Mansuri

Similar Messages

  • CO11N for serialized materials

    Hello all,
    I need to set automatic good receipt from CO11N for serialized materials since in SAP notes is reported there is no standard way to do that (control key with "automatic GR" flag does not work fot these materials).
    I'm looking for some user exit, customer enhancement, BADI, else could help me.
    Right now I'm calling, from CO11N MIGO to perform this, but I get error message C6 004 "order XXXXXX is already being processed", because I'm trying to post good movements but the confirmation is still not saved. How can I solve it?
    Any other tip?
    Regards
    Nue

    Auto goods receipt and backflush features of SAP does`nt work for the serialized materials. You need to do it manually through MIGO/MB1A/MB1C.
    Reward if cleared and close the thread.

  • Report for consignment materials

    Hi SAP Gurus,
    Is there a report for consignment materials that can show us the opening balance, receipts, Usage, and ending balance (of the stock) for a given time frame?
    thanks
    Anusha

    This doesn't do any good. it just gives the vendor information. I'm not looking for this. I'm looking for a report or a t code which gives what the opening stock levels, receipts of stock, usage of stock and ending balance of stock for consignment materials for a given time period for a plant
    thanks
    Anusha

  • Confirmation for Serialized Materials in SRM

    Hi,
    We have bunch of Serialized materials in SRM. Were able to create SC and PO 's/PR's were getting created.When I am trying to create Confirmation for Serialized Materials, its throwing me error and I dont see any field to enter the Serial Number.
    Am i missing anything on the config side or this is standard bug?
    If I am missing some steps to create confirmation for serialized items, pls od let me know.
    FYI, we are on SRM 5.5.
    Thanks,
    Satya.

    Awaiting some valuable inputs on this.
    Regards,
    Satya

  • Backflush & Auto GR for Serialized Materials

    Dear Expert,
    Can you tell me possibility of Back flushing for Serialize Materials & Automatic Good Receipt (GR) for serialized Materials in Discrete Manufacturing?
    If possible pls tell me solution for this.
    Regards,
    Dev

    Dear Dev,
    Backflushing of Serialized components is not possible because standard SAP system doesn't allow backflushing of materials which are assigned serial numbers.
    Further, you can have Auto GR setting in Production Schedulling profile in OPKP.
    You need to assign the same profile in Work Scheduling view in Material Master.
    HOpe this helps.
    Revert if any doubt.
    Regards,
    Tejas

  • Table for Inventory Status for Serialized materials

    Hello,
    Can anyone please provide the table name for finding out inventory status (i.e. unrestricted, Quality Inspection, Blocked) for serial numbers. I am trying to find out, in which inventory status does a particular serial# belonging to a particular material# is in?

    Hello Azz:
    Regarding the serial number status, you have to check the combination of three different tables:                                                                               
    EQUI - Equipment master data. In this table make note of the field 'Object number' (OBJNR), which is the primary key for:                                                                               
    JEST - Individual Object Status. This table contains the technical expression of the status in field 'Object status' (STAT), which is the primary key for:                                                                               
    TJ02 - System status. In this table you can find the texts for the system status in the fields TXT04 and TXT30.
    Then, here you have some other tables which you might also need:
    EQBS - Serial Number Stock Segment.
    SER01 - Document Header for Serial Numbers for Delivery.                                                                               
    SER02 - Document Header for Serial Nos for Maint.Contract (SD Order). 
    SER03 - Document Header for Serial Numbers for Goods Movements.                                                                               
    SER04 - Document Header for Serial Numbers for Inspection Lot.                                                                               
    SER05 - Document Header for Serial Numbers for PP Order.                                                                               
    SER06 - Document Header for Serial Numbers for Handling Unit-Content. 
    SER07 - Document Header for Serial Numbers in Physical Inventory.                                                                               
    SER08 - Document Header for Purchase Order Item Serial Numbers. 
    I hope this helps!
    Esther.

  • Need the report  for staged materials in production order

    Hi
    My user is staging the materials multiple times for the one production order.Due this reason multiple TR were generated .Because of Multiple TR , user is generating  multiple TO for issuing the material to a production order.
    Is there any way to stop the  staging process for the materials already staged.I would like to know whether there is any report which give the details of staged materials and corresponding TR & TO for a production order.
    Thanks
    Sankar

    Hi
    Warehouse activity Monitor is best tool/ report , which give the details of staged materials and corresponding TRs & TOs, to stop/cancle you have to use related WM transactions.
    To setup WM moniter user below document
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/LEWM/MMWM.pdf
    Thanks
    Madhu

  • Need monthly "material-wise" report on inventory status.

    Hi, gurus!Good Morning.
    I am pankaj recently i joined in SAP-MM.I have 4 yr.of domain exp.in SCM.
    Now,i allocate to one implementation project in Textile industory.Here there two plants,out of two GoLive of one plant has been done & in April-12 there is Golive of next plant.
    Now, i am working on some standered reports.here client wants monthly material wise inventory status report & Daily material movement report materialwise.
    i generate the report in" S_P00_07000139 "but it didn't show materialwise,it shows all material separate.
    Request to help on the same.
    Regards,
    Pankaj.

    HI,
    No standard report will full fill your requirement
    you have develop Z with help of ABAp consultant
    for Material document table MKPF and MSEG
    and check following link also it will helpful to you
    [Opening Stock and Closing Stock fields and Calculation;
    Regards
    Kailas Ugale

  • Report for serial number

    hi,
    For inhse material ,serial number profile is maintained.confirmation happened with serial number in MFBF(REM). i want to list out seiral numbers of material which is in storage location .any std reports is there for to display
    and also i want table name (where it is updated)???

    As such there is no std report which can fetch u material numbers + serial numbers + qty in stock
    What u can do is check the total number of materials with there serial numbers from MMBE or IQ09
    Useful tables could be EQSE or EQBS
    Against each serial number; there will be a status which can help u to some extent that where exactly the material is
    Check and revert
    Rgds
    Edited by: Vicky Khabrani on Feb 26, 2008 1:24 PM

  • Problem with PGI for serialized materials

    Hello
    We have created a delivery out of a stock transport order.
    The materials are picked and we have specified which serial number were picked (the material has a serial number profile).
    When performing the post goods issue for the delivery, the following error message occurs:
    "Stock data of serial number 12345678 not suitable for movement
    Serial number 12345678 cannot be used here"
    I check the status of the related equipment via IE03 and the status is EDEL ESTO.
    Could someone please help out on what is causing this error message to occur and how we can proceed with the PGI?
    BR,
    OT

    Please check whether the following notes helps you
    Note 684326 - IO231 during goods receipt
    Note 316342 - IO231 during goods receipt for stock transport order
    Note 712985 - IO201, IO231 and IO305 occur for a delivery goods movement
    G. Lakshmipathi

  • Report for Deleted Materials,vendos

    Hi Friends,
    How can I see the list of deleted materials, deleted vendors and rejected PRs for approval.???????
    Please advice...
    Thanks & Regards
    Satya

    Hi,
    The user wants to see the repor. User does not have access to SE11 to see the databaase report. Is there any standard report to see how many Materials and vendor are flagged for deletion??????
    Thanks & Regards
    Satya

  • Automatic Goods movement from CO11N for serialized materials

    Hello,
    I'm dealing with confirmation of discrete production orders. When I confirm last operation, the system has to post Good Receipt automatically but materials are serialized, so I know I cannot use flag "Automatic GR" in control key.
    My requirement is:
    soon after the confirmation, I want to call MIGO transaction (movement type 101) with order number, yield confirmed, material code coming from CO11N.
    Both CO11N and MIGO have to be on line transactions.
    I have activated enhancement CONFPP05 but the call transaction MIGO gives me the message "Order xxx is already being processed" because the confirmation isn't still saved .
    The BADI WORKORDER_CONFIRM has the same problem.
    I haven't found an exit after saving the confirmation.
    Have you any suggest?
    Regards
    Nue

    Hello
    You can try Background job for all confirmed order, ran MIGO background
    thanks
    bala

  • MB1C via LSMW for Serialized Materials not loading all Items

    Dear Experts,
    I am using LSMW to load initial entry of materials with serial numbers using Tcode MB1C. The challenge i am having is that not more than three(3) of the serials get uploaded the remaining are not loaded. I have items that have varying quantities. What could be responsible for this?

    Hi,
    Insted of LSMW  make a abap program using   'BAPI_GOODSMVT_CREATE'  it is simple and works properly.
    regards,
    zafar

  • Report for displaying materials and their prices.

    Hi All
    I am developing a report, which gives details of all material and thir rates ,of division 01, where reorder point >0 sorted by product hierarchy.
    I am using table mara, marc, makt. any anybody suggest which table shows the material rates.??
    I am using SQVI , but its not displaying duplicate records.
    can any body help me with this.
    regards
    AJ

    Dear AJ
    Apart from the tables what you had indicated, for pricing conditions, please refer KONV.  But for information, in SQVI, if you table join Tables MARA, MARC with KONV, you will not get the required details.  So what you have to do is you have to table join VBAK with the above tables and generate a report.  From the table VBAK, make a note of "Doc.condition" references and once again run KONV in which you give the Doc.condition references.
    thanks
    G. Lakshmipathi

  • Report for BOM materials

    Dear Experts,
    i have scenario which i need to capture but do not have any standard report and for that reason i am going in for Z development of the reports. please guide me so as to which field to be pulled to get the desired output.
    Scenario:
    We create Purchase order with a version control
    1. First version has the data which act as baseline and we want to compare rest of the  versions as variance
    2. If the line item in PO is a subcontracting material with L- then the subcomponents will be present as a BOM
    3. when i ammend the PO for the Qty the BOM items also get ammended but do not reflect in the version control - display changes
    4. I want to capture the PO with each line item against which there is qty change and also the material BOM change due to qty change.
    Is there any table from which i capture the data.
    Pl. help me out it would be of great help
    Thanks & Regards,
    Farhan

    Hi
    the following tables might be useful
    MAST
    STKO - Header Table of BOM
    STPO - Item Level for BOM
    MAKT
    regards
    maniraj

Maybe you are looking for

  • G7 and Firewire ports?

    Is there a way to add a Firewire port or PCMCIA port on my HP Pavilion g7-1075dx?  Without resorting to USB - with the severe quality loss in conversion, that's not an option. If not, I'd be really really interested in knowing the reason why, when FW

  • I need an advice on certifications

    Iam a fresher 2013 passed out B.E(computer science) graduate, i want to da a certification to get a good job, can anyone please advice me which certificatin should i do. 

  • TS2753 We could not complete your iTunes Store request. An unknown error occurred (0x800B010F)

    Anybosy knows what is the reason for the above?

  • Bex Broadcaster can't click past OK in variable assignement

    Hi All, Form the portal Broadcast settings in general precalculation settings when I try to change variable values selection from that actual screen I can't click past ok after selecting the variable. we are BW 7.02 and on IE8 from reading some posts

  • Cloning, then restoring drive

    I have a question. My friend has a MacBook. She recently suffered a HDD crash, and had a backup, but lost about 2 weeks worth of email, etc. So, I had her get an external drive, and I'm going to make a clone with Super Duper. She is also getting a ne