Report for Location Product hierachy creation

Anyone knows a report which can automate the location product hierarchy? (Assuming Location hierarchy and product hierarchy exists). The screen where I could maintain the hierarchy do have the generation capability.  We are looking for similar feature but batch one (with possibility of selection).
Shibu

hi - have you maintained a product-location hierarchy structure in customization? Hierarchy structures, generated hierarchy structures are based on other hierarchy structures (generated or independent - can be product/location in your case).
The initial screen for maintaining hierarchy structures is divided into two areas. The area on the left shows a tree structure in which you select the part of the structure you wish to maintain, while the area on the right consists of a table containing all the structures you have maintained, and in which each line represents a structure. You can change existing structures in or add new ones to this table.
hope this helps.
regards
Vinod

Similar Messages

  • Please any one provide crystal report for  Location wise sales report with GP

    Please any one provide crystal report for  Location wise sales report with GP.Please its urgent

    A report writer tool like Crystal reports is not available due to the cost involved in its licenses.Do you think that Oracle Reports is free then? It's $$$$.
    You can download and test it for free, but if you want to use it in production you have to buy a license.

  • Report for daily production and daily sales quantities

    Can you Please any body let me know what fields and tables should I pick to generate a report for sales qty and production qty for a material on daily basis. we are using PP PI

    Hi,
    You can use table MSEG for that purpose. Try BUDAT-MKPF as one of the selection parameters and use
    MBLNR-MKPF = MBLNR-MSEG
    MJHAR-MKPF = MJHAR-MSEG
    Sort the results in ERFMG-MSEG and ERFME-MSEG using
    BWART-MSEG = 101 minus 102 (for production)
    SOBKS-MSEG = E
    BWART-MSEG = 601 minus 602 (for sales).
    Above stuff might be useful to you for your development requirement provided you are having Sales Order specific production.
    Thanks & Regards,
    Abu Arbab A

  • Actual line items report for multiple products

    Hi All,
    We have 4 manufacturing plants and 100 fg /sfg materials are being amnufactured for each of the plants.
    Now we want to see the total actual cost incurred report for each of the fg/sfg  materials for each plant in a single report.
    Kindly share the report t. code in product costing.
    Regards
    Subbu

    Hi,
    Without ML/Actual costing, Actual cost per Product is not easy/possible! Otherwise, you could only attempt to get a cost close to Actual cost, as far as possible.
    Hope this helps.

  • Change Search help for Location in Schedule creation screen(NWBC)

    Hi all,
    My requirement is to change the standard search help for Location field in Standard stop sequence of Schedule creation in NWBC.
    Presently, the search help for the location field is a webdynpro component WDR_F4_ELEMENTARY .Is there any possibility to replace with the custom search help.
    Can anybody please let me know how to replace the search help.
    Thanks&Regards,
    Sharmista.

    Hi
    I suppose you may create a component customizing for /SCMTMS/WDCC_SCH_C_LOC_ATS, and maintain your DDIC search help for location ID, this will replace the one assigned in structure:
    You may only maintain DDIC search help here, but if you have a custom developed search help, then you may need to go with another approach, in viewexit class (/SCMTMS/CL_UI_VIEWEXIT_SCH) adapt_fields (ADAPT_FIELDS), modify the attribute 'WD_VALUE_HELP' = custom search help.
    Hope it helps

  • How to generate reports for specific products sold in e-commerce

    Hello,
    I am going to start letting products from other manufactures be sold in my online store and do a percentage split of the profit with the manufacture. I was wondering how to tag those specific products and generate a report on how many products were sold and what the gross income was from those products. This will make the quartly accounting so much easier....
    Thank you for any help...

    Supplier - Choose a supplier that you source this product from. Setting this value is useful for when you report on your sales to see which supplier products are most popular.
    Commission Payable % - The commission percentage number is stored for each product in an order. If you have to pay commissions to suppliers for selling their products then setting this number allows you to run reports that calculate the final amounts for you.
    Yea I found this stuff eairlier but the question is how do you actually run the report and how do you set up a supplier? I don't see why this is so hard it should be in the custom reports section of the reports tab. Then make new eComerce report, then pick supplier then filter for sales by supplier. But there is no filter for sales... just a filter for status and country. And I would think that you would add a supplier to the affilate program but that is actually for something else entirely. Sorry this is probably very simple and I am over complicating it...
    Thanks for your help...  

  • Report for daily production and daily sales

    Can you any body Please let me know which fields we should pick to create custom report containing production  qty and sales qty day wise for each material

    Hi Veesh,
    Whats the scenario you using there? i mean to ask
    Discrete
    REM
    or
    PP-PI
    Thanks & Regards,
    Abu Arbab

  • Report for Microsoft Products with Product Keys

    Hello,
    I'm new to Spiceworks.  I've been tasked with seeing if I can generate a report of all Microsoft products including their product key (or at least the last 5 digits) so I can check for license compliance.
    Does anyone have any hints to help me figure out how to generate such a report?  Is Spiceworks capable of doing this?
    I'll keep researching on my own but any advice that would help me along would be great.
    Thanks,
    Brian
    This topic first appeared in the Spiceworks Community

    Go to Microsoft's site & look for what you purchased, download it & enter your product key. I suspect you purchased Office for Mac '11:
    http://www.microsoft.com/mac/products

  • Report for Settled production orders

    Hi All,
    Is there a report I can use to show that these production orders are settled and these production orders need settlement. any clue on this. and when I ran the settlement does it chnages the production order status to reflect that it is settled ?
    Thanks
    MKR

    Hi MKR,
    Please go to COOIS,
    Give the plant and give the status of the order that u want to ge the list.
    then execute.
    System will give you all the production Orders which are having the particular status.
    Hope this will answer your query
    Best Regards
    Surya

  • LSMW for Open Production Order Creation

    Hi all,
    I want to migrate open production orders from legacy system to the other SAP system. Please let me know how should I do it?
    I tried using the idoc method with  Message type LOIPRO and the Basic Type LOIPRO01 but the it gives a error that No process code for message type LOIPRO. I guess this is a Outbound Idoc.
    Next I tried searching for a BAPI for prodcution orders. I found the BAPI,   BAPI_PRODORD_CREATE. But it does not contain all the fields I need. Also this BAPI cannot be used in LSMW as it ALE message type does not exist for it.
    So please let me know how can I use the idoc method to create the production order as I have all the fields required in the idoc basic type. Also please share if any other method is there to upload the data.
    Regards,
    Mozila

    We had to use BAPIs to upload the production orders.
    It was not possible with LSMW.

  • ABAP report for Active Product Categories by Vendor

    Hi,
    I have been trying to write an ABAP report in SRM to list all vendors attached to active product categories. My problem is identifying the active product categories. Can anyone help me identify these?
    Regards,
    Conor

    Some alternative is in KSB1 (Cost center line item report) - you can change the layout and include offsetting account and its text.
    But, in vendor line item report, if you want vendor number, vendor number, GL account number (offsetting) account and its text, then you should go with abap development.
    Have a look at the following note, if really serves your purpose.
    Note 1504612 - Line items: Offsetting account info (BAdI FI_ITEMS_CH_DATA)

  • FM for creation of production order creation

    Hi All,
    Can anyone tell me the BAPI for the production order creation.
    BAPI for creation of production order through CO01 transaction code.
    Thanks in advance
    Ramesh.

    Hi,
    Please check this FM CO_ZF_PRODUCTIONORDER_CREATE.
    Regards,
    Ferry Lianto

  • Report for Cost of Multiple products with Multilevel BOM explosion

    Hi,
    Our client has a requirement of a report showing standard cost estimate of multiple FG products, with multi-level BOM explosion.
    In short, the requirement is to get a CK13N report for multiple products.
    Has anyone come across such requirement? The requirements seems to be very normal.
    But, I have not seen any standard report for the same. If there is any, please suggest.
    or suggest a better solution for the same.
    Thanks in advance. Pts guaranteed.

    Hi,
    I totally agree with you that this is a totally vague requirement.
    However, let me share the reason for such client requirement.
    We have a customer, for which we produce certain parts for select models. Now, the arrangement with customer for pricing is based on the raw material and other production cost for all such parts. Based on the fluctuations in cost, the pricing would be finalised.. on a monthly or quarterly basis.
    For this purpose, the customer requires to know the raw materials used in each of the part.
    Individually it could have been managed. But the price change in terms of % is decided at global level and not for each part.
    Please suggest

  • SAP F&R:: Forecasting at any level other than LOCATION/ PRODUCT- LOCATION

    Hi, I am trying to check if F&R has the capability to let me plan the forecasting process at any level other than Location-Product.
    For example, I wish to execute a WEEKLY FORECAST only at the MERCHANDISE CATEGORY level, for all products defined under that MERCHANDISE CATEGORY. Is it possible to execute the forecast process this way? Please throw some light.
    Thanks!
    Vismay!

    Hi Vismay,
    you could use the mass_maintenance for location products and assign the forecast frequenca profile to all location products of a certain merchandise category (use merchandise category as selection).
    Alternative could be (if you are interested to do the forecast calculation once a week): You can create a new forecast frequency profile with the appropriate settings (weekly forecast; weekday the calculation has to be done; recurrency = 1). Define this new profile as the default profile!
    Best regards,
    Uli

  • Pegging overview for a product

    Hello
    In the transaction RRP3 I have a pegging overview for location product.
    Is there any possibility to get an pegging overview for a product (like a table in the RRP3)?
    When no? What function have I use for a z-program.
    Thanks,
    Sven

    Hello Ramesh
    I use the FM BAPI_MOSRVAPS_GETLIST2
    If found the problem, but not the solution.
    If i debug the BAPI_MOSRVAPS_GETLIST2:
    In the FM APO_BAPI_SELECT_GET_ORDID the FM /SAPAPO/DM_PRODUCTS_GET_IDS have a problem to get the matlocids.
    When i debug these FM, there is no problem.
    When i run the FM normal, the FM lost the selection.
    Thanks, Sven
    DATA: product_tab TYPE TABLE OF BAPIPRODUCTRANGE,
          product TYPE BAPIPRODUCTRANGE,
          location_tab TYPE TABLE OF BAPILOCRANGE,
          location TYPE BAPILOCRANGE,
          orderhead TYPE TABLE OF BAPI10503ORDHEADOUT,
          output_nodes TYPE TABLE OF BAPI10503ORDOUTPUTOUT,
          pegging_output_nodes TYPE TABLE OF BAPI10503ORDOUTPUTPEGOUT,
          return TYPE TABLE OF BAPIRET2.
    product-low = '0000000000000000000000000000000008809500'.
    product-option = 'EQ'.
    product-sign = 'I'.
    APPEND product TO product_tab.
    location-low = 'DLZ1'.
    location-option = 'EQ'.
    location-sign = 'I'.
    APPEND location to location_tab.
    break leisve.
    CALL FUNCTION 'BAPI_MOSRVAPS_GETLIST2'
      EXPORTING
        LOGICAL_SYSTEM               = 'SC7CLNT100'
        START_TIME                   = '20000101000000'
        END_TIME                     = '20101231000000'
    *   EXCLUDE_EXPORT_FLAGS         =
    *   MAX_NUMBER_OF_ORDERS         =
    *   TRANSFER_MODE                =
        PLNG_VERSION                 = '000'
    *   IO_NODE_SELECTION            = 'O'
    * IMPORTING
    *   NUMBER_OF_ORDERS             =
    TABLES
       PRODUCT_SELECTION            = product_tab
       LOCATION_SELECTION           = location_tab
       ORDER_HEADS                  = orderhead
       OUTPUT_NODES                 = output_nodes
       PEGGING_OUTPUT_NODES         = pegging_output_nodes
       RETURN                       = return
    break leisve.

Maybe you are looking for