Report for MRP controller and relevant purchasing document

HI
My requirement :We have MRP controller for different diciplines(mech, electrical, Instrumentation.......ect).
I want to search for a report Where it display me the Purchasing document(PO) number by respective decipline.
I tried all the report in MRP controller such as MC.E, MC.D, COOIS.........ect
Thanks in advance
Mujeeb

Hi Mangalraj
Thanks for your answer, but my question is not yet answered.
As you told i did follow accordingly.
When i enter the T.code: ME5A ( i can not find the scope of list ALV but did find the entried as below)
A     3-line + n special
B     2-line + n special
B1     2-line + 2 MRP list
B2     2-line + 2 stock/rq.
B3     2-line + 2 purch.dt.
C     1-line
C1     1-line + stock/rqts.
D
F     Collective release
G     3-line loop
H     2-line loop
I     1-line loop
If i select "C" from the list i'm getting 1 line display but as you told i did press the CTRL+F8 but unable to get the cost) it does not work at all like dat.
I'm using the system version 4.6C. Can you please suggest something on the report.
Thanks & regards,
Mujeeb

Similar Messages

MM06E001 User exits for EDI inbound and outbound purchasing documents

Hi
I am using enhancement MM06E001 to transfer PO data
via idoc type      ORDERS05.
I am creating PO via transaction ME21N.When ever i save the PO the data should go via this IDOC type
When we create PO the Standard long text data maintained at header level is tranferred via Segment E1EDKT1 and E1EDKT2.
The issue is that at header level i have created new PO header text.
This new PO header text data is not identified in this enhancement
thats why i am not able to send this data via
idoc using enhancement MM06E001.
Kindly help me on how to pass the text data using Idoc
via enhancement MM06E001.
Thanks & Regards,
Chetan

Hello,
         I believe you are writing the Code in the Exit EXIT_SAPLEINM_002 in which you are manually populating the Header Text while it is not required for the Standard Segments like E1EDKT1 & E1EDKT2. If there is any Text maintained in the PO, it will be automatically populated in the Header Segment E1EDKT1 & E1EDKT2.
        Put a Break Point in this Customer Function and check if the Data is already being filled into these Segments in the Table INT_EDIDD.
Thanks and Regards,
Venkat Phani Prasad Konduri

F4 help for MRP Controller not adjacent to Plant

Hello Dear all,
I need F4 help for MRP controller on selection screen but only valid values for the plant value entered in the selection screen
If select option for Plant and MRP controller are one below the other on selection screen, then F4 help for MRP controller gives relevant values ony for that Plants entered.
But if they are not adjacent to each other F4 help for MRP controller gives all possible values. In such a case should we code separately for F4 help of MRP controller.
Any suggestions.
Thanks and regards,
Mohit

>That means F4 help will suppose to come automatically, but it's not providing the F4 functionality on the Time field. It's sounds like a bug in Web dynpro ABAP.
No, this is normal. There is no time value help in Web Dynpro ABAP.
From the online help:
There is no automatic F4 help for data element TIMS.
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/47/9f724642314aabe10000000a42189b/frameset.htm
You can create your own Freely Programmed Value Help for time however. I created one and shared it as a sample implementation:
http://code.google.com/p/abap-sdn-examples-tpj/downloads/detail?name=NUGG_WD_TIMESTAMP_VALUE_HELP_DEC2008.nugg&can=2&q=
http://code.google.com/p/abap-sdn-examples-tpj/downloads/detail?name=ChapterX%20-%20User%20Programmed%20Value%20Help.pdf&can=2&q=

Report for Asset number and its Purahcse order number

Hello Friends,
Please give me details of report for Asset number and its Purchase order number .
Regards
Nilesh Vakil

hi,
GO to ME2N...
use SHIFT + F4..
there check for the acc. assign cata. field and input the asset and execute..
Regards
Priyanka.P

Creating Planned orders and Requisitions for a particular MRP controller and for all the others only Requisition is to be created.

Hi Experts,
Currently we run Program 'RMMRP000' as a batch job to create Planned orders and requisitions.
The client wants that Planned orders and Requisitions should be created for a particular MRP controller and for all the others only Requisition is to be created.
I implemented Exit 'EXIT_SAPMM61X_001' in the following manner by passing MRP controller to user_key.
IF mt61d-dispo <> user_key.
no_planning = 'X'.
ENDIF.
But as you can see that this will not meet my client requirement.
If any of you has worked on similar requirement / if any one knows that this is achievable or not,
please share your inputs.

Moved from SAP ERP Sales and Distribution (SAP SD) to ABAP Development
G. Lakshmipathi

I had a trial version of Pages for 30 days and then purchased the actual software without removing the trial. Now when I try to edit documents and save them it wont because it tells me I am using a trial version.... How can I remove the trial version?

I had a trial version of Pages for 30 days and then purchased the actual software without removing the trial. Now when I try to edit documents and save them it sometimes wont because it tells me I am using a trial version.... But sometimes it lets me!! How can I remove the trial version? I cannot tell which one I am using when I open it....

Question asked and answered quite once a week.
Go to my iDisk (address below)
and download :
For_iWork:iWork '09:uninstall iWork '09.zip
Run it then reinstall the purchased software.
Yvan KOENIG (VALLAURIS, France) vendredi 2 janvier 2011 16:21:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community

Standard report for cheq incomming and chq ougoing.

Dear All,
urgent one please.
Is any standard report for cheque incomming and cheque ougoing with document wise.
if so pls suggest me.
awaiting your valuable suggestions.
Thanks & Regards,
satishkumar.m

Hi,
my doubt is in.tr.code fb02 and after putting doc type bp(bank payables) after executing that i will get screen showing details ie., doc no., year, type do.date and posting date.
my client wants outgoing cheq details ie., to who we have issued the cheques with cheque no, date, and bank.
if we go to drilldown report of fb03 we r getting but each and every entry they cant go and drilldown it..
we cheked in fchn but that requirement wont suit to my client..
can any one suggest me.
thanks & regards,
satishkumar.m

Report for daily production and daily sales quantities

Can you Please any body let me know what fields and tables should I pick to generate a report for sales qty and production qty for a material on daily basis. we are using PP PI

Hi,
You can use table MSEG for that purpose. Try BUDAT-MKPF as one of the selection parameters and use
MBLNR-MKPF = MBLNR-MSEG
MJHAR-MKPF = MJHAR-MSEG
Sort the results in ERFMG-MSEG and ERFME-MSEG using
BWART-MSEG = 101 minus 102 (for production)
SOBKS-MSEG = E
BWART-MSEG = 601 minus 602 (for sales).
Above stuff might be useful to you for your development requirement provided you are having Sales Order specific production.
Thanks & Regards,
Abu Arbab A

I work for the County and we purchased a copy of Adobe Photoshop CS2 long ago. The person that did the order is no longer here. All I have is the CD Disk that is new but i did not know the key code is. Is there a way to get the keycode for this?

I work for the County and we purchased a copy of Adobe Photoshop CS2 long ago. The person that did the order is no longer here. All I have is the CD Disk that is new but i did not know the key code is. Is there a way to get the keycode for this?

It would not work anyway. The activation servers have been retired and Adobe has provided a new CS2 download along with a new serial number for CS2 owners.
Download Acrobat 7 and CS2 products
Gene

Drill Down reports for Profit Centers and Segments

Hello Experts
I would like to down load the "Drill down reports for profit center and segments". I have found standard SAP documentation through (http://help.sap.com/erp2005_ehp_05/helpdata/EN/46/f6fc4e7a7569b5e10000000a114a6b/frameset.htm ).
As per the given guidelines, i have beening trying to down load from client 000, the spool request is showing finished (with out any error and in one / two seconds) .. but the reports are appearining in SAP Easy Acess.
I have checked with Basis team, whethere i have restrictions with my userid. Even with Basis id also, we are being unable to activate these reports.
Does it required any configuration / licence issues before i need to lookinto before download?
Kindly revert
Regards
Anil Kumar

Hello Experts
This is solved. However, i am mentioning the solution here for further references
Before downloading the drill down reports, we need to activate the business funciton "FIN_GL_CI_1" through T.Code SFW5
Regards
Anilkumar

Where can i activate a delivery report for my sms and mms?

where can i activate a delivery report for my sms and mms?
I dont seem to find it on my Iphone 5.
Its unacceptable!
Also a sound for missed calls seems to be missing to !!!
Unacceptable!
Can somebody help me please?
[email protected]

Unbelieveble and unacceptable.
Every simple phone has a delivery report....
Big dissapointment
Iphone never again.
thanks anyway

Standard report for Reconciliation report for Asset Accounting and GL

is ther any standard report for Reconciliation report for Asset Accounting and GL

hi
functional specification r reqired for this issue
regards
venkataswamy

Reporting for clearing, residual and payment of AR documents

The request is to create a report (ALV) that will show the billing document/accounting document, the clearing document with amount, the residual document with amount and if it is a shortpay.
The BSEG and BSAD tables have been looked at but some cases are not easy to break apart to code.
Is function module available that will generate this information?
Much appreciated!

BSEG provided all the answers, but the coding to get all the required information is tricky and complex.
Start with the invoice document and get the clearing document. This could be a DZ or an AB. If an AB, go back to BSEG and find the DZ using the clearing document. Finally, get residual using the AB where the document is both the clearing document and the document number.
Many variations can exist so be sure to check for business process on how clearing is accomplished.

Report for MRP PO

1. I want a report which diplays POs & PRs created through MRP & created manually. How?
2. Through Document type we can easily distinguish between the Purchase Requisitions that have been generated through MRP and those created manually. How?
Regards
VS

YOu can get the report for req created by MRP/Manually or any other criteria by using transaction ME5A
Use ME5A then from dynamic selection (On Maib screen color button) select the creation indicator by double clicking on it and entr the value B for MRP same way for any other REqs
This will give you the exact reports which you are looking for it so you don;t need to create the new document type for this purpose
rewards the points

Report for open orders and amount of product confirmed

Hi All,
Can some one give me an idea on a report which shows open orders and also shows amount of product confirmed against these open orders?
Thanks,
Neelima.

Hi Veni,
Incomplete order are the order's in which some data is missing so that particular order can't be further processed, that is what you could check through "Incompletion Log". Whereas Open orders are the orders which are open for further processing viz. deliver billing(but open order is a complete order i.e. no data missing).
Check this program:
*& Report ZGM_OPENPO *
REPORT ZGM_OPENPO NO STANDARD PAGE HEADING LINE-SIZE 132 LINE-COUNT 36(2).
TABLES: t001w, "Plants/Branches
ekko, "Purchasing Document Header
ekpo, "Purchasing Document Item
marc, "Plant Data for Material
mara. "General Material Data
DATA:
BEGIN OF itab OCCURS 0,
matnr LIKE marc-matnr,
werks LIKE marc-werks,
beskz LIKE marc-beskz,
mmsta LIKE marc-mmsta,
END OF itab.
DATA: BEGIN OF iekpo OCCURS 0,
ebeln LIKE ekpo-ebeln,
menge LIKE ekpo-menge,
aedat LIKE ekpo-aedat,
wemng LIKE eket-wemng,
END OF iekpo.
DATA: BEGIN OF iekko OCCURS 0,
ebeln LIKE ekko-ebeln,
lifnr LIKE ekko-lifnr,
bedat LIKE ekko-bedat,
ekgrp LIKE ekko-ekgrp,
END OF iekko.
selection-screen:begin of block b1 with frame title text001.
SELECT-OPTIONS werks FOR ekpo-werks OBLIGATORY.
SELECT-OPTIONS matnr FOR ekpo-matnr.
SELECT-OPTIONS beskz FOR marc-beskz.
SELECT-OPTIONS bsart FOR ekko-bsart.
selection-screen:end of block b1.
INITIALIZATION.
AT SELECTION-SCREEN ON werks. "Validate for werks
SELECT SINGLE * FROM t001w WHERE werks IN werks.
IF sy-subrc 0. MESSAGE e429(mo). ENDIF.
AT SELECTION-SCREEN ON matnr.
SELECT SINGLE * FROM mara WHERE matnr IN matnr.
IF sy-subrc 0. MESSAGE e429(mo).ENDIF.
START-OF-SELECTION.
SELECT * FROM marc INTO CORRESPONDING FIELDS OF TABLE itab WHERE werks IN werks AND beskz IN beskz AND
matnr IN matnr.
SELECT ebeln FROM ekpo INTO CORRESPONDING FIELDS OF TABLE iekpo
FOR ALL ENTRIES IN itab WHERE matnr = itab-matnr AND loekz EQ space.
SELECT ebeln lifnr bedat ekgrp FROM ekko INTO CORRESPONDING FIELDS OF
TABLE iekko
FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln AND bsart IN bsart.
SELECT ebeln menge aedat FROM ekpo INTO CORRESPONDING FIELDS OF iekpo
FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln. MODIFY iekpo INDEX sy-dbcnt.
ENDSELECT.
SORT iekpo BY aedat.
DELETE ADJACENT DUPLICATES FROM iekpo COMPARING ebeln.
SELECT wemng FROM eket INTO CORRESPONDING FIELDS OF iekpo FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln.
MODIFY iekpo INDEX sy-dbcnt.
ENDSELECT.
END-OF-SELECTION.
DATA : file_name TYPE string.
file_name = 'c:\pay_det\open_po1.xls'.
DATA : BEGIN OF it_join_fields OCCURS 0,
field_name(20),
END OF it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'ebeln'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'menge'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'aedat'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'wemng'.
APPEND it_join_fields.
CLEAR it_join_fields.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = file_name
filetype = 'ASC'
APPEND = 'X'
write_field_separator = 'X'
TABLES
data_tab = iekpo
FIELDNAMES = it_join_fields
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT iekpo.
IF iekpo-menge NE iekpo-wemng.
WRITE:/4 iekpo-ebeln,21 iekpo-menge ,46 iekpo-aedat, 56 iekpo-wemng.
ENDIF.
ENDLOOP.
if sy-subrc 0. write / 'no data exist for this plant'. endif.
TOP-OF-PAGE.
uline 1(80).
WRITE :/ sy-vline, 20 ' OPEN purchase ORDERs report' color 5,
80 sy-vline.
uline 1(80).
WRITE:/ sy-vline , 4 'PURSCHASE ORDER' COLOR COL_HEADING,
20 sy-vline, 21 'ORDER QUANTITY' COLOR COL_HEADING,
45 sy-vline, 46 'item change' color col_heading, 55 sy-vline,
56 'RECIEVED QUANTITY' COLOR COL_HEADING, 80 sy-vline.
uline 1(80).
END-OF-PAGE.
WRITE :/ 'PAGE NUMBER' ,SY-PAGNO.
Hope this helps you.
Regards,
Chandra Sekhar

Report for MRP controller and relevant purchasing document

Similar Messages

Maybe you are looking for