[REPORT] : Help to arrange the row & column.
Dearest my Collegues.
I'm facing difficult in arranging of report.
Straight to the point:
I've data in 1 ODS like this.
Key1 Key2 Flag Supplier
K1 1 C Nike
K1 2 C Reebok
K1 3 C Adidas
K1 4 P FILA
K1 5 P Othelo
For key1, key2, flag, supplier are characteristic NOT KEY FIGURE.
Can i make that report like this:
<space><space>C<space>P
Key1<space>Supplier<space>Supplier
K1<space>Nike
K1<space>Rebook
K1<space>Adidas
K1<space><space>Fila
K1<space><space>Othelo
I need your guidance .. p/s ..
I'm sorry if i use space with bracket 'coz i'm difficult to explain it; somehow this forum can't know my space (from keyboard).
Hopefully, it still can help me to explain the problems well.
Many Tks.
Kind regards,
Niel
Message was edited by:
Niel
Message was edited by:
Niel
You have to use BEx Report Designer for this kind of formating intensive reports.
What it allows you is to move the columns in the report around, re-arrange them left, right, top and down e.t.c.
You can get more information in this section and consequent sub-sections
http://help.sap.com/saphelp_nw2004s/helpdata/EN/dd/cea14119eb9f09e10000000a155106/frameset.htm
Regards
Uday
Assign points for helpful answers and get one point for urself.
Similar Messages
-
How to print the row ,column,and particular cell in separate color
how to print the row ,column,and particular cell in separate color IN ALV GRID
HI,
Here you go good program links
<a href="http://www.sapfans.com/forums/viewtopic.php?t=52107">How to Set Color to a Cell in AVL</a>
<a href="http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm">ALV Grid Coloring</a>
Thanks
Mahesh -
A Characteristci appears twice under the Rows Column on the left hand side.
Hi All,
According to the requirement , there are 2 Material Numbers ,1 of them is used for Compounding,which is not required in the Report,but as it is used for Compounding ,we need to place that in the rows.
We have put tat in "NO DISPLAY" mode,but Material Number appears twice under the Rows column, on the left hand side of the screen, in the Portal when we execute the Report.How Can we have to display only 1 Material Number on the left hand side of the screen?
Thanks in Advance,
Sravanithe left hand side of the screen is reakky vague....you should be more specific...
Probably you need to filter out the compounding characteristics in the global filter area.
Thanks...
Shambhu -
In the old version of Numbers (09) as well as in the same Pages version I could choose to allow to mark single lines inbetween rows/columns in order to choose to create different types of lines to mark separations in different sections or just single cells within a table, how do I do that in the recent upgrade?!!! I´m going mad over here!!!!!
Hi A-S,
Do you mean Cell Borders in the Format Panel?
To create this?
Or if you want borders under only A5 and C5 (but not B5) command click on those cells to select them before applying the borders in Format Panel
Regards,
Ian. -
Hyperion financial reporting hierarchical structure of the rows
Hi All,
I am using hyperion financial reporting for creating reports.
I have a prompt for account in the row dimension and according to the selection of the
row dimension the tree like structure will come for the member selected.
I am getting the tree stucture but it is like an inverted tree structure.
What should i do to get the correct tree structure?
ThanksIf you are descendants of accounts, it is not possible. However, try IAncestors of level 0 account. I never tried that.
Good luck!
Venu -
SAP PS Module Report, Help needed for the Right Logic.
Hi,
I have to develop a PS module Report . This spec of this report is when you enter , project # , month , date , proj type it should display all the projects and only the billing levels with different fiels like ITD cost, ITD sales, ytd cost, sales, awards etc etc.
Right now Iam getting the O/P : in the following manner, There are many fields I am just showing the desired ones which have to be changed.
Proj, Title, award, ITDsales, ITD cost , ytd sales, ytd costs,
14148, New prj 123 -- --- -
14148-B01, bill1 -
234 -
456 -
14148-B02, bill2 -
789 -
123 -
14148.001 wbs1 -
123 -
456
14148.001 wbs2 -
567 -
890
But for me the desired output must be only for project and the billing levels. It shouldnt be for WBS elements xxxx.001 and xxxx.002.
Desired output:
Proj, Title, award, ITDsales, ITD cost , ytd sales, ytd costs,
14148, New prj 123 -- 690 -
1346
14148-B01, bill1 -
234 -
456 -
14148-B02, bill2 -
789 -
123 -
The ITD costs and YTD costs must be added 123 + 567 = 690 and
456+890 = 1346.
And these values must come on the project level.
P.S: I can restrict the values for wbs elements , means I can filter them at PRPS table by giving prps-stufe LE 2. Then I wont get the wbs level, But I want the values of these to be added up and then show it on the project level.
Please go through this code and let me know where exactly I need to put the right logic to work in the desired manner.
Thanks in advance
Dan
Code Below************************
[code]TABLES: PROJ, "Project Definition
PRPS, "WBS Elements
prhi,
CEPC, " Profit Center w/ Group Head info
BPGE, "Plans (12, 13, etc.)
COSP, "Primary Cost Element (Bill Sales, DPC)
COSS, "Secondary Cost Element (Shrd Sls,Sal,etc)
COSB, "Results Analysis Cost Elements (Unbil Sls)
COOI, "Commitments management: Line items
JEST, "Project Status
TCJ04, "Person Responsible for Project
zpclasses, "Project classes.
New Added
CRCO, " Assignment of Work Center to Cost Center
CRHD. " Work Center Header
Record Layout of extracted data
TYPES: BEGIN OF EXDEF, "Data definition of extract data
X_BU(2) TYPE C, "Business Unit
X_CNTR(10) TYPE C, " Profit Center
X_PROJ(24) TYPE C, "Project def (Prj)
X_CREP(30) TYPE C, "Contract Rep.
X_BDREP(25) TYPE C, "BD Rep. name
X_GRPH(15) TYPE C, "Tech Rep employee name
X_ACTREP(15) TYPE C, "Acct Rep employee name
X_PMGR(15) TYPE C, "PM employee name
X_TTLE(35) TYPE C, "Title
X_CLNT(20) TYPE C, "Client
X_POCN(20) TYPE C, "Prime Contract Number
X_TYPE(13) TYPE C, "Order Type Sarnoff
X_OPEN(10) TYPE C, "Open Date
X_CLOSE(10) TYPE C, "Close Date
X_CGT(4) TYPE C, "CO, GV, TC
X_DISTR(2) TYPE C, "Distribution Channel
X_CONTR(6) TYPE C, "Percentage contribution
X_AWRD(14) TYPE C, "Award (Plan 11)
X_P12R(14) TYPE C, "Auth Revenue (Plan 12 @ Rev)
X_P12C(14) TYPE C, "Auth Cost (Plan 12 @ Cost)
X_P13R(14) TYPE C, "Auth Revenue (Plan 13 @ Rev)
X_P13C(14) TYPE C, "Auth Cost (Plan 13 @ Cost)
X_ITDS(14) TYPE C, "ITD Sales
X_ITDC(14) TYPE C, "ITD Costs
X_YTDS(14) TYPE C, "YTD Sales
X_YTDC(14) TYPE C, "YTD Costs
X_MTHS(14) TYPE C, "Current Month Sales
X_MTHC(14) TYPE C, "Current Month Costs
X_ITDB(14) TYPE C, "ITD Billed Sales
X_YTDB(14) TYPE C, "YTD Billed Sales
X_MTHB(14) TYPE C, "Current Month Billed Sales
X_COMM(14) TYPE C, "Commitments
X_STAT(6) TYPE C, "Active or Inactive (REL, TECO, or CLSD)
X_ZPROJCLASS(12),
X_MTHIC(14) TYPE C, "Current Month Incremental Costs
X_YTDIC(14) TYPE C, "YTD Incremental Costs
X_ITDIC(14) TYPE C, "ITD Incremental Costs
X_ZSCURVE(10) TYPE C, "S-CURVE Status
New Added
X_CM_COST(20) TYPE C,
X_AM_COST(20) TYPE C,
X_TL_COST(20) TYPE C,
X_KP_COST(20) TYPE C,
X_PM_COST(20) TYPE C,
END OF EXDEF.
Data declarations
FIELD-SYMBOLS <MNT> .
DATA: ETAB TYPE EXDEF OCCURS 100 WITH HEADER LINE.
DATA: X1_PM_COST(20) TYPE C,
X1_TL_COST(20) TYPE C,
X1_AM_COST(20) TYPE C,
X1_CM_COST(20) TYPE C,
X1_KP_COST(20) TYPE C.
DATA: KOKRS_FIXED LIKE PROJ-VKOKR VALUE 'DSRC', "Controlling Area
TOTAL_AWARD LIKE BPGE-WTGES,
TOTAL_AUTHR12 LIKE BPGE-WTGES,
TOTAL_AUTHC12 LIKE BPGE-WTGES,
TOTAL_AUTHR13 LIKE BPGE-WTGES,
TOTAL_AUTHC13 LIKE BPGE-WTGES,
TOTAL_ITDSALES LIKE BPGE-WTGES,
TOTAL_ITDCOSTS LIKE BPGE-WTGES,
TOTAL_ITDICOSTS LIKE BPGE-WTGES,
TOTAL_YTDSALES LIKE BPGE-WTGES,
TOTAL_YTDCOSTS LIKE BPGE-WTGES,
TOTAL_YTDICOSTS LIKE BPGE-WTGES,
TOTAL_MTHSALES LIKE BPGE-WTGES,
TOTAL_MTHCOSTS LIKE BPGE-WTGES,
TOTAL_MTHICOSTS LIKE BPGE-WTGES,
TOTAL_ITDBILLED LIKE BPGE-WTGES,
TOTAL_YTDBILLED LIKE BPGE-WTGES,
TOTAL_MTHBILLED LIKE BPGE-WTGES,
TOTAL_COMMITMENT LIKE COOI-WTGBTR,
HOLD_PRART LIKE PRPS-PRART,
COUNT_PROJECTS TYPE I,
MNT_INDX(20) TYPE C,
HLD_INDX(3) TYPE N,
YYYY_MM(10) TYPE C,
TEMP-DATE(8) TYPE C.
Selection Screen
SELECTION-SCREEN SKIP 3.
SELECTION-SCREEN BEGIN OF BLOCK XEXTRPM WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 2.
PARAMETERS MONTH(2) TYPE N OBLIGATORY.
PARAMETERS YEAR(4) TYPE N OBLIGATORY.
SELECT-OPTIONS: EXTRPRJ FOR PROJ-PSPID. " Range of Projects
SELECT-OPTIONS: EXTRTYP FOR PRPS-PRART. "Project Types (CO,GV,etc.*)
SELECT-OPTIONS: EXTRPCTR FOR PROJ-PRCTR. " Range of Profit centers
SELECTION-SCREEN SKIP 2.
PARAMETERS: OPT1 RADIOBUTTON GROUP OPTN,
OPT2 RADIOBUTTON GROUP OPTN DEFAULT 'X'.
select-options : s_pc for proj-zprojclass. "project class
SELECTION-SCREEN END OF BLOCK XEXTRPM.
Select Tables
START-OF-SELECTION.
write: / 'Sales data (Unshared) extracted on: ', sy-datum.
uline.
CLEAR: COUNT_PROJECTS,
TOTAL_AWARD,
TOTAL_AUTHR12,
TOTAL_AUTHC12,
TOTAL_AUTHR13,
TOTAL_AUTHC13,
TOTAL_ITDSALES,
TOTAL_ITDCOSTS,
TOTAL_YTDSALES,
TOTAL_YTDCOSTS,
TOTAL_MTHSALES,
TOTAL_MTHCOSTS,
TOTAL_ITDBILLED,
TOTAL_YTDBILLED,
TOTAL_MTHBILLED,
TOTAL_COMMITMENT,
ETAB.
PROJ Table Project Definition
SELECT * FROM PROJ "Project Definition
WHERE PSPID IN EXTRPRJ AND " Range of Project Numbers
PRCTR IN EXTRPCTR and " Range of Profit center
zprojclass in s_pc. "project class
SELECT * FROM PRPS WHERE "WBS Elements
PRART IN EXTRTYP " Range of Proj.Types (CO,GV,TC..
and PSPHI = PROJ-PSPNR.
HOLD_PRART = ' '. "clears project type
CLEAR ETAB.
ETAB-X_PROJ = PRPS-POSID.
ETAB-X_BU = PRPS-PRCTR(2). "Business Unit
ETAB-X_PMGR = PROJ-VERNA. "Project Manager
IF PRPS-PRCTR(2) = '01'.
ETAB-X_CNTR = PRPS-PRCTR. " Profit Center
CONCATENATE SPACE PRPS-PRCTR INTO ETAB-X_CNTR SEPARATED BY SPACE.
ELSE.
ETAB-X_CNTR = PRPS-PRCTR. " Profit Center
ENDIF.
ETAB-X_TTLE = PRPS-POST1. "Title
CLEAR TEMP-DATE.
TEMP-DATE = PROJ-PLFAZ. "Project planned start date
CONCATENATE TEMP-DATE4(2) '/' TEMP-DATE6(2) '/'
TEMP-DATE+0(4) INTO ETAB-X_OPEN.
TEMP-DATE = PROJ-PLSEZ. "Project planned finish date
CONCATENATE TEMP-DATE4(2) '/' TEMP-DATE6(2) '/'
TEMP-DATE+0(4) INTO ETAB-X_CLOSE.
Tech Lead
will comment below
SELECT SINGLE VERNA FROM TCJ04 "Tech Lead name from TCJ04
INTO (ETAB-X_GRPH) WHERE VERNR = PROJ-ZGRPHD.
End Of Tech Lead
Account Manager
SELECT SINGLE VERNA FROM TCJ04 "Acct Manager from TCJ04
INTO (ETAB-X_BDREP) WHERE VERNR = PROJ-ZBUSDEV.
******End Of Account Manager
Key Personnel
SELECT SINGLE VERNA FROM TCJ04 "Account Rep name from TCJ04
INTO (ETAB-X_ACTREP) WHERE VERNR = PROJ-ZRESPDIR.
********End of Key Personnel
**Contract Manager
SELECT SINGLE VERNA FROM TCJ04 "Contract Rep name from TCJ04
INTO (ETAB-X_CREP) WHERE VERNR = PROJ-ZCNTREP.
End of Contract Manager
PRPS Table WBS's attached to the Project
SELECT * FROM PRPS WHERE "WBS Elements
PRART IN EXTRTYP "Range of Proj.Types (CO,GV,TC..
AND PSPHI = PROJ-PSPNR.
order by posid stufe. "Sort by WBS & Level (needed?)
get info from level 1 of the WBS
IF PRPS-STUFE EQ 1. "top-level WBS element
HOLD_PRART = PRPS-PRART. "save project type for later
ETAB-X_STAT = '????'. "set ? as the default status
get Status for level 1
SELECT * FROM JEST "use JEST to determine Status
WHERE OBJNR = PRPS-OBJNR
AND INACT EQ SPACE. "space denotes an active status
CASE JEST-STAT. "find the system status (Ixxx)
WHEN 'I0001'.
ETAB-X_STAT = 'CRTD'. "Created
WHEN 'I0002'.
ETAB-X_STAT = 'REL'. "Released
WHEN 'I0045'.
ETAB-X_STAT = 'TECO'. "Technically Complete
WHEN 'I0046'.
ETAB-X_STAT = 'CLSD'. "Closed
ENDCASE.
ENDSELECT.
Select only active projects (ie; those not with TECO or CLSD)
IF OPT2 EQ 'X'
AND ( ETAB-X_STAT EQ 'TECO'
OR ETAB-X_STAT EQ 'CLSD' ).
EXIT.
ENDIF.
*comment Contract Rep and Proj man because we get them from PROJ now
etab-x_crep = prps-zzcont. "Contract Rep.
etab-x_pmgr = prps-verna. "Program Manager Name
ETAB-X_CLNT = PRPS-ZZMANDT. "Client Name
ETAB-X_CGT = PRPS-PRART. "CO, GV, TC, etc
ETAB-X_DISTR = PRPS-ZZVTWEG. "Distrib Channel (ie; GP, etc.)
ETAB-X_CONTR = PRPS-USR04. "Contribution %
ETAB-X_POCN = PRPS-ZZPOCN. "Contract Number
ETAB-X_TYPE = PRPS-ZZORDT. "Order Type Sarnoff
Award and Authorization (Revenue & Cost)
SELECT * FROM BPGE
WHERE OBJNR = PRPS-OBJNR
AND LEDNR = '0001' "Budget / Planning Ledger
AND TRGKZ = 'N' "Object indicator
AND WRTTP = '01' "Value Type
AND ( VERSN = '011' "011 = Award
OR VERSN = '012' "012 = Billing Authorization
OR VERSN = '013' ). "013 = RA Authorization
"010 = Funding Authorization
Award Plan 11
IF BPGE-VERSN = '011'. "Plan 11 = Award
CASE BPGE-VORGA.
WHEN 'KSTP'. "KSTP = Cost level
ETAB-X_AWRD = ETAB-X_AWRD + BPGE-WTGES.
ENDCASE.
ENDIF.
IF prps-stufe eq '2'.
Authorization (Revenue & Cost plan 12) Plan 12
IF BPGE-VERSN = '012'. "Plan 12 = RA Authorization
CASE BPGE-VORGA.
WHEN 'KSTR'. "KSTR = Revenue level
ETAB-X_P12R = ETAB-X_P12R - BPGE-WTGES.
WHEN 'KSTP'. "KSTP = Cost level
ETAB-X_P12C = ETAB-X_P12C + BPGE-WTGES.
ENDCASE.
ENDIF.
Authorization (Revenue & Cost plan 13) Plan 13
IF BPGE-VERSN = '013'. "Plan 13 = RA Authorization
CASE BPGE-VORGA.
WHEN 'KSTR'. "KSTR = Revenue level
ETAB-X_P13R = ETAB-X_P13R - BPGE-WTGES.
WHEN 'KSTP'. "KSTP = Cost level
ETAB-X_P13C = ETAB-X_P13C + BPGE-WTGES.
ENDCASE.
ENDIF.
endif.
ENDSELECT. "BPGE
ENDIF. "end of if prps-stufe eq 1. top-level WBS element
COSP Table (External Postings) Awards
COSP Table (External Postings) Billed Sales
COSP Table (External Postings) DPC's & Legacy Load
SELECT * FROM COSP
WHERE OBJNR = PRPS-OBJNR AND
GJAHR LE YEAR
AND (
( kstar = '0000400999' and "old CE for Award $
( KSTAR BETWEEN '0000400990' AND '0000400999' AND
VERSN = '011' AND "11 = Award
WRTTP = '01' ) "01 = Planned
OR ( ( KSTAR BETWEEN '0000400001' AND '0000400989' OR
KSTAR BETWEEN '0000999001' AND '0000999003' ) AND
WRTTP = '04' ) "04 = Actuals
OR ( ( KSTAR BETWEEN '0000998001' AND '0000998010' OR
KSTAR BETWEEN '0000600001' AND '0000601999' ) AND
WRTTP = '04' ) "04 = Actuals
*------- Awards
if cosp-kstar = '0000400999' and "old 400999 = Awards
IF COSP-KSTAR BETWEEN '0000400990' AND '0000400999' AND
COSP-VERSN = '011' AND "11 = Award
COSP-WRTTP = '01'. "01 = Planned
IF YEAR = COSP-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSP-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_AWRD = ETAB-X_AWRD + <MNT>.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSP-GJAHR.
ETAB-X_AWRD = ETAB-X_AWRD +
COSP-WKG001 + COSP-WKG002 +
COSP-WKG003 + COSP-WKG004 +
COSP-WKG005 + COSP-WKG006 +
COSP-WKG007 + COSP-WKG008 +
COSP-WKG009 + COSP-WKG010 +
COSP-WKG011 + COSP-WKG012 +
COSP-WKG013 + COSP-WKG014 +
COSP-WKG015 + COSP-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- Billed Sales
IF ( COSP-KSTAR BETWEEN '0000400001' AND '0000400989' OR
COSP-KSTAR BETWEEN '0000999001' AND '0000999003' ) AND
COSP-WRTTP = '04'.
"0000999001 = ITD Sales
"0000999003 = ITD Billed Revenue
IF YEAR = COSP-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSP-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDB = ETAB-X_ITDB - <MNT>.
ETAB-X_YTDB = ETAB-X_YTDB - <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHB = ETAB-X_MTHB - <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSP-GJAHR.
ETAB-X_ITDB = ETAB-X_ITDB -
COSP-WKG001 - COSP-WKG002 -
COSP-WKG003 - COSP-WKG004 -
COSP-WKG005 - COSP-WKG006 -
COSP-WKG007 - COSP-WKG008 -
COSP-WKG009 - COSP-WKG010 -
COSP-WKG011 - COSP-WKG012 -
COSP-WKG013 - COSP-WKG014 -
COSP-WKG015 - COSP-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- DPC's & Legacy Load
IF ( COSP-KSTAR BETWEEN '0000998001' AND '0000998010' OR
COSP-KSTAR BETWEEN '0000600001' AND '0000601999' ) AND
COSP-WRTTP = '04'.
IF YEAR = COSP-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSP-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDC = ETAB-X_ITDC + <MNT>.
ETAB-X_YTDC = ETAB-X_YTDC + <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHC = ETAB-X_MTHC + <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSP-GJAHR.
ETAB-X_ITDC = ETAB-X_ITDC +
COSP-WKG001 + COSP-WKG002 +
COSP-WKG003 + COSP-WKG004 +
COSP-WKG005 + COSP-WKG006 +
COSP-WKG007 + COSP-WKG008 +
COSP-WKG009 + COSP-WKG010 +
COSP-WKG011 + COSP-WKG012 +
COSP-WKG013 + COSP-WKG014 +
COSP-WKG015 + COSP-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
ENDSELECT.
COOI Table (Commitments) commitments for the WBS elements
SELECT * FROM COOI
WHERE OBJNR = PRPS-OBJNR.
ETAB-X_COMM = ETAB-X_COMM + COOI-WTGBTR.
ENDSELECT.
COSS Table (External Postings) G&A on Commitments
COSS Table (External Postings) Shared Billed Sales
COSS Table (External Postings) Shared DPC's
COSS Table (External Postings) Salary,ESE,OH, & G&A
SELECT * FROM COSS
WHERE
( OBJNR = PRPS-OBJNR AND
WRTTP = '22' ) "G&A on Commitments
OR
( OBJNR = PRPS-OBJNR AND
GJAHR LE YEAR AND
WRTTP = '04' AND "04 = Actuals
( "Shared Billed Sales
( KSTAR BETWEEN '0000400001' AND '0000400989' OR
KSTAR BETWEEN '0000999001' AND '0000999003' )
OR "Shared DPC's
( KSTAR BETWEEN '0000600001' AND '0000601999' )
OR "Salary,ESE,OH, & G&A
( ( KSTAR BETWEEN '0000001000' AND '0000001999' OR
KSTAR BETWEEN '0000002100' AND '0000002199' OR
KSTAR BETWEEN '0000002500' AND '0000002599' OR
KSTAR BETWEEN '0000002800' AND '0000002899' ) )
and parob not like 'PR%' ) "commented out on 4/19/2000
*------- G&A on Commitments (NOTE: data is always as of the RUN date)
IF COSS-WRTTP = '22'.
ETAB-X_COMM = ETAB-X_COMM +
COSS-WKG001 + COSS-WKG002 +
COSS-WKG003 + COSS-WKG004 +
COSS-WKG005 + COSS-WKG006 +
COSS-WKG007 + COSS-WKG008 +
COSS-WKG009 + COSS-WKG010 +
COSS-WKG011 + COSS-WKG012 +
COSS-WKG013 + COSS-WKG014 +
COSS-WKG015 + COSS-WKG016.
ENDIF.
*------- Shared Billed Sales
IF ( COSS-KSTAR BETWEEN '0000400001' AND '0000400989' OR
COSS-KSTAR BETWEEN '0000999001' AND '0000999003' ) AND
COSS-WRTTP = '04'.
IF YEAR = COSS-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSS-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDB = ETAB-X_ITDB - <MNT>.
ETAB-X_YTDB = ETAB-X_YTDB - <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHB = ETAB-X_MTHB - <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSS-GJAHR.
ETAB-X_ITDB = ETAB-X_ITDB -
COSS-WKG001 - COSS-WKG002 -
COSS-WKG003 - COSS-WKG004 -
COSS-WKG005 - COSS-WKG006 -
COSS-WKG007 - COSS-WKG008 -
COSS-WKG009 - COSS-WKG010 -
COSS-WKG011 - COSS-WKG012 -
COSS-WKG013 - COSS-WKG014 -
COSS-WKG015 - COSS-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- Shared DPC's
IF COSS-KSTAR BETWEEN '0000600001' AND '0000601999' AND
COSS-WRTTP = '04'.
IF YEAR = COSS-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSS-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDC = ETAB-X_ITDC + <MNT>.
ETAB-X_YTDC = ETAB-X_YTDC + <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHC = ETAB-X_MTHC + <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSS-GJAHR.
ETAB-X_ITDC = ETAB-X_ITDC +
COSS-WKG001 + COSS-WKG002 +
COSS-WKG003 + COSS-WKG004 +
COSS-WKG005 + COSS-WKG006 +
COSS-WKG007 + COSS-WKG008 +
COSS-WKG009 + COSS-WKG010 +
COSS-WKG011 + COSS-WKG012 +
COSS-WKG013 + COSS-WKG014 +
COSS-WKG015 + COSS-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- Salary,ESE,OH,& G&A
IF ( COSS-KSTAR BETWEEN '0000001000' AND '0000001999' OR
COSS-KSTAR BETWEEN '0000002100' AND '0000002199' OR
COSS-KSTAR BETWEEN '0000002500' AND '0000002599' OR
COSS-KSTAR BETWEEN '0000002800' AND '0000002899' ) AND
COSS-WRTTP = '04'.
IF YEAR = COSS-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSS-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDC = ETAB-X_ITDC + <MNT>.
ETAB-X_YTDC = ETAB-X_YTDC + <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHC = ETAB-X_MTHC + <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSS-GJAHR.
ETAB-X_ITDC = ETAB-X_ITDC +
COSS-WKG001 + COSS-WKG002 +
COSS-WKG003 + COSS-WKG004 +
COSS-WKG005 + COSS-WKG006 +
COSS-WKG007 + COSS-WKG008 +
COSS-WKG009 + COSS-WKG010 +
COSS-WKG011 + COSS-WKG012 +
COSS-WKG013 + COSS-WKG014 +
COSS-WKG015 + COSS-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
ENDSELECT.
COSB Table (Results from running RA) Unbilled Sales
SELECT * FROM COSB
WHERE OBJNR = PRPS-OBJNR
AND KSTAR BETWEEN '0000003004' AND '0000003005'
"0000003004 = Unbilled Revenue
"0000003005 = Unearned Revenue
AND GJAHR LE YEAR
AND WRTTP = '32'. "32 = Results Analysis
IF YEAR = COSB-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSB-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDS = ETAB-X_ITDS - <MNT>.
ETAB-X_YTDS = ETAB-X_YTDS - <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHS = ETAB-X_MTHS - <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSB-GJAHR.
ETAB-X_ITDS = ETAB-X_ITDS -
COSB-WKG001 - COSB-WKG002 -
COSB-WKG003 - COSB-WKG004 -
COSB-WKG005 - COSB-WKG006 -
COSB-WKG007 - COSB-WKG008 -
COSB-WKG009 - COSB-WKG010 -
COSB-WKG011 - COSB-WKG012 -
COSB-WKG013 - COSB-WKG014 -
COSB-WKG015 - COSB-WKG016.
ELSE.
EXIT.
ENDIF.
ENDSELECT.
ENDSELECT. "End of WBS records (from PRPS) for project
Get Total Sales by adding Billed Sales to Unbilled Sales.
ETAB-X_ITDS = ETAB-X_ITDS + ETAB-X_ITDB.
ETAB-X_YTDS = ETAB-X_YTDS + ETAB-X_YTDB.
ETAB-X_MTHS = ETAB-X_MTHS + ETAB-X_MTHB.
IF HOLD_PRART IN EXTRTYP. "Matches the user requested project type
IF OPT1 EQ 'X' OR "All projects
( OPT2 EQ 'X' AND "Only active projects
ETAB-X_STAT NE 'TECO' AND
ETAB-X_STAT NE 'CLSD' ).
TOTAL_AWARD = TOTAL_AWARD + ETAB-X_AWRD.
TOTAL_AUTHR12 = TOTAL_AUTHR12 + ETAB-X_P12R .
TOTAL_AUTHC12 = TOTAL_AUTHC12 + ETAB-X_P12C.
TOTAL_AUTHR13 = TOTAL_AUTHR13 + ETAB-X_P13R.
TOTAL_AUTHC13 = TOTAL_AUTHC13 + ETAB-X_P13C.
TOTAL_ITDSALES = TOTAL_ITDSALES + ETAB-X_ITDS.
TOTAL_ITDCOSTS = TOTAL_ITDCOSTS + ETAB-X_ITDC.
TOTAL_YTDSALES = TOTAL_YTDSALES + ETAB-X_YTDS.
TOTAL_YTDCOSTS = TOTAL_YTDCOSTS + ETAB-X_YTDC.
TOTAL_MTHSALES = TOTAL_MTHSALES + ETAB-X_MTHS.
TOTAL_MTHCOSTS = TOTAL_MTHCOSTS + ETAB-X_MTHC.
TOTAL_ITDBILLED = TOTAL_ITDBILLED + ETAB-X_ITDB.
TOTAL_YTDBILLED = TOTAL_YTDBILLED + ETAB-X_YTDB.
TOTAL_MTHBILLED = TOTAL_MTHBILLED + ETAB-X_MTHB.
TOTAL_COMMITMENT = TOTAL_COMMITMENT + ETAB-X_COMM.
PERFORM SHIFT_SIGN.
APPEND ETAB. "Write data to internal table
CLEAR ETAB.
COUNT_PROJECTS = COUNT_PROJECTS + 1. "Count # of Projects
ENDIF.
ENDIF.
ENDSELECT.
ENDSELECT. "End of Projects from PROJ table
PERFORM GRAND_TOTALS.
SORT ETAB BY X_BU X_PROJ.
ETAB-X_BU = 'BU'.
ETAB-X_CNTR = 'PrftCntr'.
ETAB-X_PROJ = 'Proj'.
ETAB-X_CREP = 'Contract Mgr'.
ETAB-X_BDREP = 'Account Mgr'.
ETAB-X_GRPH = 'Technical Lead'.
ETAB-X_ACTREP = 'Key Person1'.
ETAB-X_PMGR = 'Program Mgr'.
ETAB-X_TTLE = 'Title'.
ETAB-X_CLNT = 'Client'.
ETAB-X_POCN = 'Contract #'.
ETAB-X_TYPE = 'Type'.
ETAB-X_OPEN = 'Open'.
ETAB-X_CLOSE = 'Close'.
ETAB-X_CGT = 'CGT'.
ETAB-X_DISTR = 'DC'.
ETAB-X_CONTR = 'Contr%'.
ETAB-X_AWRD = 'Award'.
ETAB-X_P12R = 'Auth12 Sales'.
ETAB-X_P12C = 'Auth12 Cost'.
ETAB-X_P13R = 'Auth13 Sales'.
ETAB-X_P13C = 'Auth13 Cost'.
ETAB-X_ITDS = 'ITD Sales'.
ETAB-X_ITDC = 'ITD Costs'.
ETAB-X_YTDS = 'YTD Sales'.
ETAB-X_YTDC = 'YTD Costs'.
ETAB-X_MTHS = 'Mth Sales'.
ETAB-X_MTHC = 'Mth Costs'.
ETAB-X_ITDB = 'ITD Billed'.
ETAB-X_YTDB = 'YTD Billed'.
ETAB-X_MTHB = 'Mth Billed'.
ETAB-X_COMM = 'Commitments'.
ETAB-X_STAT = 'Status'.
INSERT ETAB INDEX 1. "Write a report header line to internal table
CLEAR ETAB.
CALL FUNCTION 'Z_RH_START_EXCEL_DATA_OLE'
EXPORTING
data_name = 'C:\WINNT\Profiles\cbraswell\Desktop\TestTemp.xlt'
DATA_NAME = 'ZSales.XLS'
DATA_PATH_FLAG = 'W'
DATA_TYPE = 'DAT'
DATA_BIN_FILE_SIZE = 'ZSales'
CHART_TITLE = 'ZSales'
CHART_TYPE = 2
CATEGORY_TITLE = 'ZSales'
VALUE_TITLE = 'ZSales'
DATA_XTOP_COR = 0
DATA_YTOP_COR = 0
DATA_XBOT_COR = 0
DATA_YBOT_COR = 0
CATEGORY_XTOP_COR = 0
CATEGORY_YTOP_COR = 0
CATEGORY_XBOT_COR = 0
CATEGORY_YBOT_COR = 0
TABLES
DATA_TAB = ETAB
EXCEPTIONS
NO_BATCH = 1
DOWNLOAD_ERROR = 2
INVALID_TYPE = 3
INTERNAL_ERROR = 4
NO_OLE_SUPPORT = 5
OLE_FILE_ERROR = 6
OLE_ERROR = 7
NO_DATA = 8
COORDINATE_ERROR = 9
OTHERS = 10.
Negative # sign in the front of number for downloading to Excel
FORM SHIFT_SIGN.
IF ETAB-X_AWRD CA '-'. SHIFT ETAB-X_AWRD RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P12R CA '-'. SHIFT ETAB-X_P12R RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P12C CA '-'. SHIFT ETAB-X_P12C RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P13R CA '-'. SHIFT ETAB-X_P13R RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P13C CA '-'. SHIFT ETAB-X_P13C RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDS CA '-'. SHIFT ETAB-X_ITDS RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDIC CA '-'. SHIFT ETAB-X_ITDIC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDC CA '-'. SHIFT ETAB-X_ITDC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDS CA '-'. SHIFT ETAB-X_YTDS RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDC CA '-'. SHIFT ETAB-X_YTDC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDIC CA '-'. SHIFT ETAB-X_YTDIC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHS CA '-'. SHIFT ETAB-X_MTHS RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHC CA '-'. SHIFT ETAB-X_MTHC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHIC CA '-'. SHIFT ETAB-X_MTHIC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDB CA '-'. SHIFT ETAB-X_ITDB RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDB CA '-'. SHIFT ETAB-X_YTDB RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHB CA '-'. SHIFT ETAB-X_MTHB RIGHT CIRCULAR. ENDIF.
IF ETAB-X_COMM CA '-'. SHIFT ETAB-X_COMM RIGHT CIRCULAR. ENDIF.
ENDFORM.
FORM GRAND_TOTALS.
SKIP 1. .
WRITE: / '----
WRITE: / 'System ID = ', SY-SYSID,
/ 'Client = ', SY-MANDT,
/ 'User = ', SY-UNAME,
/ 'Date of data extract = ', SY-DATUM ,
/ 'Number of Projects = ', COUNT_PROJECTS,
/ 'total Award (Plan 11) = ', TOTAL_AWARD,
/ 'total Auth SalesHi all,
Iam really waiting for someone to see and get the logic right for this code.Iam completely stuck up. i need ur help
Thanks -
Report not displaying all the rows
Hi Experts,
We are having a report which when ran for a year as a filter criteria gives me 6725 rows and i also observe that there are more rows which are not getting displayed. Is there any restriction with the no of rows getting displayed. I am also able to find the specific information of a particular vendor when i explicitly filter it. Which would otherwise not get displayed in the normal report execution for the entire year. Thanks
Warm Regards,
AkileshHello Akilesh,
This is the issue with your Bex Analyzer...! please update ur Bex with all the latest patches. I am sure this report sould be running on other mechines...
I will try to find the concern patch in t he mean while..!
EnjoySAP -
Is it possible to resize the row / column of a table at run time ?
Hello All ,
I want to make a table where the user have to put datas . But if some data exceeds the length of the column / row the user should have the ability to resize the column / row of the table just like we are able to do at the time of designing . Is it possible ??
Thanks .
Bibhu .Hi,
If you select a cell in the table that cannot receive data, then the expand to fit will not be available.
However if you select an object that is in the table (like a textfield) then the option of expand to fit should be available.
Try experimenting with the options.
Niall -
Issue with row/column text lengths in report painter
Hi Gurus,
I have created a report painter report with formatting of the row/column length text as medium, but for one FS item/GL Account the report when executed still picks up only the short text length. I am not sure how this can be resolved.
Any ideas is appreciated.
Regards
SatishApplied OSS Note 360096 and it worked. Thanks for all your help.
-
How to get the Row and Column values in ALV (without using Objects)
Hi All,
I need to get the Row / Column when double click is used in ALV, I can use the double click event for this. However, I do not want to use the Object Oriented ALV. I want to implement the same functionality using general (using functions) ALV.
Is there any way to get the row / column values for a Generia (non-OOPs) ALV report.
Please help.
Thanks,
Vishal.Hello,
The only think you have to do is to get the index where the user clicked, and then read the internal table you sent to the alv
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'prg_name'
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND' " this is to the click event!!
i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = alv_layout
it_fieldcat = alv_fieldcat
i_save = 'A'
it_events = alv_events[]
TABLES
t_outtab = i_totmez. ---> TOUR IT.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
" then....
FORM user_commandUSING r_ucomm TYPE sy-ucomm
ls_selfield TYPE slis_selfield.
" r_ucomm -> HAS THE STATUS
" ls_selfield-tabindex -> HAS THE SELECTED INDEX
" THEN READ THE INTERNAL TABLE
" HERE YOU WILL HAVE THE SELECTED ROW
READ TABLE i_totmez INDEX ls_selfield-tabindex.
ENDFORM.
cheers,
Gabriel P. -
Report with multiple dimensions in Row and Column with EvEXP
Hi
We are currently running BPC 7.0 SP3 and try to create the report(or schedule) with more 2 x 2 dimensions in the row and column.
e.g.
row dimension : Outer row is Entity, Inner row is Account
column dimension : Outer column is Time, Inner row is Category
We created the report with 2 x 2 dimensions like above e.g. with EvEXP and EvNXP, NOT EvDRE
based on default dynamic template:Template13.xlt(Nested Row, 2 x 1 dimensions defined by EvEXP and EvNXP formula).
However, when expanding the dimension with double click these dimensions or change CV of the report with 2 x 2 dimensions defined by EvEXP and EvNXP formula,
error occurs on EvEXP and EvNXP formula and can't retrieve the result correctly.
[Question]
Can't we create the report with more 2 x 2 dimensions in the row and column using EvEXP and EvNXP function ?
We understand that we can make the report with more 2 x 2 dimensions in the row and column if using EvDRE.
Thank You in advance
KenyaThank you for your advice.
I understand that we should use EvDRE when creating the report with multiple dimension in the row/column because EvEXP have some erros, poor performance, etc.
Then, we have two questions.
1)
>plus they had some errors in the designs.
what kind of errors they have as an example?
2)
>If you must build the EVEXP and EVNXP, I would suggest building the template from scratch
We built the simple template with just 2 x 2 dimension from scratch.
But this report doesn't work well when double-click the dimension or changing CV...
Would you please check the following template?
<https://sapmats-de.sap-ag.de/download/download.cgi?id=RCZE1ME4YSORY3DCDO4NNMANZLBL1L5ZBUOB2F71YVNVS8XDJW>
It would be greatly appreciated if you could give me your advice for the template.
Thank you again
And my best regards,
Kenya -
Datform's Rows & Columns are not displaying in Capital Expense Planning
Hi ,
Any one let me know why the Dataforms Row's & Columns are not displaying in Summary Reports Dataforms in Capital Expense Planning ,in 9.3.1 Version.
Any help on this appreciable...
Thanks.........As John mentioned, make sure that you aren't supressing the data. If there is no data in essbase and you are supressing missing data then there will be no rows. You can unselect "supress missing data" by going to admin>manage data forms. Select the data form in question and click edit, then navigate to the row/column tab and under row properties, ensure that the "supress missing data" check box is unselected.
You will want this unselected if users are going to input data in this form.
DQ -
Report layout changes with the values in it
I he a standard report, but i want certain report rows to show up in red when a value of the row is null.
I know you have to use different templates, but how or where do i need to put the condition to change report row templates?
ThanksUse multiple row/column templates (there are up to 4 available in a report template), controlling which is used via the Row/Column Template 1 Condition and Row/Column Template 1 Expression etc, depending on whether it is a named column (row) template or a generic column template.
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/themes.htm#BABFFGGJ -
Supress the ROW_ID column in the Select Query.
Hi,
I have one custom form and from main form I am calling the Line Form.
But when I am clicking the LINE button then Form is getting open but it is giving one Error message like
FRM-40505: Oracle Error:unable to perform query
Once I check the Detail error.
it is giving me this message.
ORA-00904: "ROW_ID": invalid identifier
And I checked the query my query is returning the ROW_ID column.
Please help on Suppressing the Row_id column getting selected from the query.
Thanks
NiharHi Nihar;
Please see:
Transactions Workbench Error: Listing of FRM Errors [ID 1321612.1]
Regard
Helios -
Changing a datagrid column image according to the datagrid column value
Flash Builder 4.5 / SDK 4.5.1.
Fairly new to Flash Builder & Flex
Application targets tablets so it's a "mobile" project.
Been beating my head up against the wall on trying to figure out how to do this. Watched videos on Lynda.com. Read Adobe "docs" till my eyes glaze over. Takes me about 2 lines of code in my corresponding .NET project doing the same thing.....
Tried numerous examples. Inline rendering, external rendering files per the examples.
I have a response field in the database and corresponding column in the s:datagrid. If the "reportInfoResponse" field is null (not answered), show an image with a question mark. If yes show an image with "Yes" on it. Same for a no answer.
I get errors of:
1120:Access of undefined property negativeAnswer.
1120:Access of undefined property affirmativeAnswer
1120:Access of undefined property reportInfoResponse
1120:Access of undefined property showResponseImage
If I put this in an external rendering file I also get an error where it can't access the datafield (reportInfoResponse). I've tried data.reportInfoResponse, {data.reportInfoResponse}, {reportInfoResponse} and just plain reportInfoResponse the external rendering file with no luck. I've tried single and double quotes around Y and N. According to all the examples (not to say there aren't more!), I should be able to reference data.reportInfoResponse in the external file and things should be fine. Of course, the examples are bare bones code and I don't have a clue if any importing of classes or other items need to take place. I never see any references of such. The examples also show the image embedding and changing the image by using imageID.source=... In my code it tells me it can't find it.
I have put (ERROR HERE...) on the lines where I'm getting the error messages. I've eliminated a lot of database scripting and such cause that's all working.
Any and all suggestions would be appreciated as I'm pulling out what little hair I have left.......and that's not much at my age........ And yes, I probably could do it by just show text in the column, but that's not what the customer wants... There are other columns I need to do this for so I figure if I can get 1 done and working, the rest are a snap. I CAN use inline or external rendering to show an image. It's the changing it that is the catch.........
Thanks in advance!
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
creationComplete="onCreationComplete()"
title="{whichCategoryName} > {whichSubCatName} > Questions">
<fx:Script>
<![CDATA[
import com.adobe.serializers.utility.TypeUtility;
import flash.data.SQLConnection;
import flash.data.SQLMode;
import flash.data.SQLResult;
import flash.events.StatusEvent;
import flash.filesystem.File;
import flash.net.URLRequest;
import flash.net.URLVariables;
import flash.net.navigateToURL;
import flashx.textLayout.tlf_internal;
import mx.collections.ArrayCollection;
import mx.core.BitmapAsset;
import mx.events.FlexEvent;
import spark.events.GridEvent;
import spark.events.IndexChangeEvent;
...(lots of database coding left out here)
<s:DataGrid id="showQuestions" width="100%" height="100%"
creationComplete="Grid_creationCompleteHandler(event)" fontFamily="_sans"
gridClick="gridClickEvent(event);" horizontalScrollPolicy="off"
selectionColor="#8AD8EF" selectionMode="singleRow" sortableColumns="false"
variableRowHeight="true" verticalCenter="middle">
<s:columns>
<s:ArrayList>
<s:GridColumn visible="false" dataField="id_report" headerText="id_report" resizable="true" sortable="false"></s:GridColumn>
<s:GridColumn visible="false" dataField="id_question" headerText="id_question" resizable="true" sortable="false"></s:GridColumn>
<s:GridColumn id="col_reponse" visible="true" dataField="reportInfoResponse" headerText="Response" resizable="true" sortable="false">
<s:itemRenderer>
<fx:Component>
<s:GridItemRenderer>
<fx:Script>
<![CDATA[
[Embed(source="assets/unknown.png")]
[Bindable]
public var unknownAnswer:Class;
[Embed(source="assets/yes.png")]
[Bindable]
public var affirmativeAnswer:Class;
[Embed(source="assets/no.png")]
[Bindable]
public var negativeAnswer:Class;
(ERROR HERE - 1120:Access of undefined property reportInfoResponse)
if(reportInfoResponse == "Y")
(ERROR HERE - 1120:Access of undefined property showResponseImage)
showResponseImage.source = affirmativeAnswer;
(ERROR HERE - 1120:Access of undefined property reportInfoResponse)
if (reportInfoResponse == "N")
(ERROR HERE - 1120:Access of undefined property showResponseImage)
showResponseImage.source = negativeAnswer;
]]>
</fx:Script>
<s:Image id="showResponseImage" source="{unknownAnswer}" verticalCenter="0" horizontalCenter="0"/>
</s:GridItemRenderer>
</fx:Component>
</s:itemRenderer>
</s:GridColumn>
<s:GridColumn id="col_question" visible="true" dataField="question" headerText="Question" resizable="true" sortable="false"></s:GridColumn>
</s:ArrayList>
</s:columns>
<s:AsyncListView list="{showTheseQuestions}"/>
</s:DataGrid>
</s:View>Ioan Thanks for the reply.
Probably my previous explanation of the problem was a little incomplete. Let me give a better description.
The situation is something like this.
I have a requirement in which the customer wants the column header to reflect the 'keep filter value' restriction that he does dynamically in the query report.
i.e:
-- usually the kf column header shows 'sales volume'
-- column header with text variable of the Calender year / month variable -- 'sales volume for 2000 oct'
-- but when the report is run, if the user wants to go and change the filter: calender year / month > rt clk > keep filer value > select Jan 2003.
The kf column header still shows 'Sales Volume 2000 Oct'
How to make the column header change to 'sales volume for Jan 2003' ?
Any suggestions greatly appreciated.
Thanks,
Maybe you are looking for
-
Why does the 7th generation ipod nano not have games
I want to know why the 7th generation ipod nano does not come with: 1- games 2- voice memo
-
Changing an Invoice Created From MIRO
What transaction can I use to change an invoice which was created via transaction MIRO? Is it possible to do a change on the invoice? I can display the invoice using MIR4 but couldn't find the transaction for changing it. Thanks, Beth
-
Is there an update for AE CS5 coming soon?
Is there an update for AE CS5 coming soon? I am hoping it will fix the problems I am having...
-
Folder Structure Archiving: exporting folder structure + content
Hi, I would like to copy a part of an existing folder structure (with included contents) from a production UCM 11g instance (I'm using Folder_g) to a development instance (using a tar of the newly created archive). I'm trying to use Folder Structure
-
How to clear cache and other items
How do you clear cache and check to see if Mac is running properly