Report with multiple dimensions in Row and Column with EvEXP

Hi
We are currently running BPC 7.0 SP3 and try to create the report(or schedule) with more 2 x 2 dimensions in the row and column.
e.g.
row dimension : Outer row is Entity, Inner row is Account
column dimension : Outer column is Time, Inner row is Category
We created the report with 2 x 2 dimensions like above e.g. with EvEXP and EvNXP, NOT EvDRE
based on default dynamic template:Template13.xlt(Nested Row, 2 x 1 dimensions defined by EvEXP and EvNXP formula).
However, when expanding the dimension with double click these dimensions or change CV of the report with 2 x 2 dimensions defined by EvEXP and EvNXP formula,
error occurs on EvEXP and EvNXP formula and can't retrieve the result correctly.
[Question]
Can't we create the report with more 2 x 2 dimensions in the row and column using EvEXP and EvNXP function ?
We understand that we can make the report with more 2 x 2 dimensions in the row and column if using EvDRE.
Thank You in advance
Kenya

Thank you for your advice.
I understand that we should use EvDRE when creating the report with multiple dimension in the row/column　because EvEXP have some erros, poor performance, etc.
Then, we have two questions.
1)
>plus they had some errors in the designs.
what kind of errors they have as an example?
2)
>If you must build the EVEXP and EVNXP, I would suggest building the template from scratch
We built the simple template with just 2 x 2 dimension from scratch.
But this report doesn't work well when double-click the dimension or changing CV...
Would you please check the following template?
<https://sapmats-de.sap-ag.de/download/download.cgi?id=RCZE1ME4YSORY3DCDO4NNMANZLBL1L5ZBUOB2F71YVNVS8XDJW>
It would be greatly appreciated if you could give me your advice for the template.
Thank you again
And my best regards,
Kenya

Similar Messages

Dynamic Positioning of Objects in a Grid (rows and columns) with AS3 Tutorial

The topic of a dynamic positioning of objects in a right grid (rows and columns) comes up often so I decided to post an AS3 solution here:
http://flashascript.wordpress.com/2010/12/25/arranging-objects-into-2d-dynamic-grid-with-a ctionscript-3/

Hard to tell from your description but this might help:
http://dtptools.com/product.asp?id=atid
Bob

XL-Reporter - Financial Periods specified in row and column selections

Hello to all,
again I have no idea how to solve an XLR problem after I tried different ways with unwanted results and after trying to find suggestions in the samples and help files.
As a result I need a report which looks roughly like this
2007 2006 2005 ...
Jan.
Feb.
Mar.
Dec.
where each cell of the matrix is the total of invoices of a selected customer over the month in the specified year.
I mainly tried to solve this in two different ways.:
1.)
Definition of a parameter for finacial period: name=fp, dimension, type=financial period, attribute=code
Column selection summary for each year: PER(code=YearAll(@fp)) resp. PER(code=YearAll(@fp-12)) ...
Row selection expansion: BPA(CardCode=@customer) ARDT(Code=Invoice) PER(PeriodInYear=1:12) Group By PER.PeriodInYear
In each cell of the matrix the data attribute =ixGet(SO_LineTotal) is specified.
The cell in the first colum (month) of the matrix is =ixDimGet(PER; PeriodInYear).
2.)
No parameter for the financial period is defined;
Column selection summary for each year: PER(Year=2007) resp. PER(Year=2006) ...
The rest is the same as in 1.)
As a result I actually get a matrix with a column for each year and a row for each month, where the first column is 1, 2, ..., 12 (this is OK).
But for all 12 month I get the same value, which is the (correct) total value for the whole year!
Where is the failure in my intuition?
Many thanks for your help!
Regards,
Frank Romeni

I found it works if I don't set the selection to period in the Column and row. Here are my selections
Row
Row 8-9 Expanding
PER( * ) Group By PER.PeriodInYear
Row 9 Expanding
FACT BPA( CardCode = @BPCode ) ARDT( Code = "Invoice" )
Column
Column C Expanding
FACT FIG( SO_TaxDate >= "01/01/2007" ) PER( * ) Group By PER.Year
then I use a Column total to total the row expansion of the SO_LineTotal with =SUM( ixRef(C9,2) ) were C9 is the expanding SO_LineTotal. Then I hide Row 9 in excel to hide the details.
If you post your email I can send you the IXR report definition
Dan

Column chart from Bex query with 2 characteristics in rows and column

Hi,
We're trying to represent the following column chart in Dashboard Design:
Material/Month
January
February
March
Material 1
100
200
300
Material 2
400
500
600
Material 3
700
800
900
The BEX query has:
Result objects: Material, Month/year; amount
The problem is when i paste the Material dimension in the Excel, i'm getting the following result:
Material/Month
January
February
March
Material 1
100
200
300
Material 1
400
500
600
Material 1
700
800
900
So, when i display the column chart, the material tag is incorrect:
as the image attached shows.

Hey Flora,
Happy to hear that its working now.
Answering your question, again its upto the connection and report format you are using. Based on your question i hope you your report output should be like this.
You cannot map to two labels for the series, again this report format is possible only in cross tab through Webi. I would suggest you to concatenate the material and month in a dimension in webi like below.
I have done the concatenation in excel level, i would suggest you to do that in webi. Try to reduce the formula as much in excel.
or
If you are using Query browser connection, then i would suggest you to create a separate report which will display the actual vs plan material wise, here you need to pass the material as a prompt.
Hope this helps in clear, please revert me for any clarification.

Apple id with multiple users of Macs and device with ML

If a house has three Macs, (John' and, Jan's MacBook Pros and. A MacBook Air (to share)) An iPhone and ipad each.
If we have use same Apple ID for music, apps etc. will all notifications of each others mail etc get sent to all macs and devices?
While using Pages etc. will each others documents turn up on other's machine and devices?
Is there a manual that addresses such issues.
OR do the two have to have two appleids and payout for applications twice?
Hope this makes sense

You can use different Apple ids for iTunes and iCloud in the same account. That way you can share purchases while keeping the documents and messages separate. See http://support.apple.com/kb/HT4895 for instructions on setting it up.

Reading each value from spreadsheet file with delay (multiple rows and columns)

Hi,
a) I want to read EACH VALUE from a spreadsheet file having multiple rows and columns WITH DELAY. I am attaching my VI and sample datalog file for reference (tempsensor.txt).I need to do so because as soon as I read put ON the Sensor button on front panel, LV reads all the values at one go. I need the values for each temperature to be displayed after a delay.
b) Secondly, I would like to read another file containing the state of four antennas (deployed:1; undeployed:0). I am logging state of each antenna in each column of the file(magnet.txt) I need to have four LEDS on front panel to display state of the antennas. I dont know what I have done for antennas in my VI is right or wrong. I guess thats rhe wrong way to approach the problem. Please help!!!(column1: Antenna1 state ; Column2:Antenna2 state.. and so..on..)
Any help would be greatly appreciated!!
Thanks in advance,
Ratnesh
FYI: The first column in my datalog file represents timestamp(number of seconds elapsed), second column: reading for temperature sensor 1, third column: reading for temperature senosr 2, and so on. I am using approx. 11 temperature sensors.
Also, I have generated the log files for the reference purpose only. They do not represent the actual values. They are far away from actual values.
Attachments:
01032005.zip ‏30 KB

Look at this modified version of your VI. After looking at it, I determined that a shift reggister was not required in this case.
Lynn
Attachments:
MultiSensors.2.vi ‏85 KB

How to color Rows and Columns of BI Query

Hi to all,
I have created BI query in query designer, with 2 structures for rows and Columns.
Now I need that certain rows can be colored orange and certain columns as green color.
I knew that it can be done in Query designer, but slice and dice reporting can not be done, which I required in my report.
Is there any way I can do in WAD.
or any other way to do that.
i shall be thankfull to you for this.
Regards
Pavneet Rana

Hi Rana,
You can do the coloring of KF values using the report designer tool.
Check the below links
http://help.sap.com/SAPhelp_nw70/helpdata/en/dd/cea14119eb9f09e10000000a155106/frameset.htm
[Creating Formatted reports using BEx Report Designer|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00ae5173-6112-2d10-d78f-e7779d269f25?QuickLink=index&overridelayout=true]
Regards
KP

How do I delete multiple rows and columns in an image?

I am looking into how digital SLRs extract video data from a CMOS sensor. To give an example, the GH1 from Panasonic can record video at 1920 x 1080 from a 12 MPixel sensor that, say, is 4000 horizontal x 3000 vertical. How they do that seems to be not in the public domain, but there have been a few guesses (see http://www.dvxuser.com/V6/showthread.php?t=206797 and http://luminous-landscape.com/forum/index.php?showtopic=38713).
One approach would be to simply read every second row of sensor pixels (1500 rows read from the original 3000) and once you have those in memory, delete every second column (2000 columns left). You would end up with a 2000 x 1500 image which could then be resampled to 1920 x 1080.
I'd like to simulate what the camera appears to be doing, by generating a 4000 x 3000 test image and then asking Photoshop CS4 to delete the appropriate rows and columns. It may not necessarily be every second row; the Canon 5DMk11 appears to read every third row, so I may need to delete two out of every three rows.
Can Photoshop do that sort of thing? If so, how?

Thanks for the suggestions. Yes, I did take a detailed look at your images, but they weren't 100% convincing because it wasn't clear just what was happening. And Adobe's explanation, after reading it again, explains nothing at all to someone who doesn't know how Nearest Neighbor works.
But you are correct -- Nearest Neighbor does effectively delete pixels. I proved it with the attached 6 x 6 image of coloured pixels (the tiny midget image right after this full stop -- you'll have to go to maximum zoom in PS to see it).
These are the steps to delete every second row and then every second column.
1. Select Image > Image Size.
2. Set Pixel Dimensions > Height to half the original (in this case set to 3 pixels).
3. Set Resample Image to Nearest Neighbor.
4. Click OK and the image shoould now consist of three vertical white strips and three vertical Green-Red-Blue stripes.
5. Repeat steps 1-4, but this time set Pixel Dimensions > Width to half the original (in this case set to 3 pixels). The image should now consist of three horizontal stripes Green-Red-Blue.
Just to make sure the method worked for every third pixel, I repeated the above steps but with 2 pixels instead of 3 and obtained the correct White-Green, White-Green pattern.
I resampled the Height and Width separately for the test so that I could see what was happening. In a real example, the height and width can be changed at the same time in the one step, achieving the same results as above.
Finally, how to explain how Nearest Neighbor works in the simple cases described above?
Division by 2
In the case of an exact division by two (pixels numbered from top leftmost pixel), only the even numbered rows and columns remain. To put it a different way, every odd numbered row and column are deleted.
Division by 3
Only rows and columns 2, 5, 8, 11... remain.
Division by N
Only rows and columns 2, 2+N, 2+2N, 2+3N... remain.
To put it simply, a resample using Nearest Neighbor (using an exact integer multiple) keeps every Nth row and column, starting from number two. The rest are deleted.

Navigation on row and column total in pivot report

Hi All,
I have created a pivot report with 2 dimension columns and one measure and defined row and column total. Now, users wants to have a navigation report on the row/column total so that once he clicks on total value, he can see the detail report. While doing this, he also wants to pass on the 2 dimension column values to detail report.
Is there any workaround for this?
Thanks in advance.

use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul

Lock rows and columns header in a table view report. It is possible?

hi,
I have a Dashboard that displays a report in "Table View" with many rows and columns.
Is it possible to set a lock on the rows and columns like Excel?
This would have blocked such headers that contain attributes and measures and to browse the report (eg with a scroll bar) had always viewed the headers.
Can you help me?
Thanks

hi,
please go through this discussion
Re: SCROLL BAR to FREZZ HEADERS
thanks,
saichand.v

How can I preserve row and column addresses on multiple cells at once in Numbers?

How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort. I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula. I want to avoid having to go one by one. I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126' I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill. If there is another way to remedy my sorting problem that would also be welcomed!
THANKS!!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

Limitation of row and column in FR report

Hi all,
i want to know what is the maximum number of row and column that we can display in FR report.
and is there any possibility to increase the number of row and column in FR reports,if yes then how?
Thanks in advance.

Hi Andy,
I think your asking if this or something similar could be used to go to another page rather than as a popup? The answer is yes. since you have already done the decode in your query, you can just go to the Report Attributes tab (I'm using version 2.2.1.00.04) and click the edit button for the column. Then, you can simply go to the
HTML Expression [Insert column value] text area and insert:
<!--
#A#
This will give you everything that is in the column link section, but I find it easier to work with since it's all together (personal preference).
I reread your post and realized that you wanted to pass the A as a value and not the summary value of the column. I simply removed the #'s. I think this should work. I also kept the summary value using the #A# as the link. I belive that you can copy and paste this into each column (replacing the A with the appropriate column header of course...).
If I were doing this I might create a CASE statement in the query and evaluate for null before creating the link. Here is an example of using that approach:
CASE WHEN "STATUS" = 'U' AND ("CREATEDBY"=:APP_USER OR :APP_USER='MY_USER')
THEN ''
|| '<img src="#WORKSPACE_IMAGES#edit.gif" border="0" alt="Click here to Edit">'
|| ''
ELSE ''
END LINK,
Neil

Row and Column Template in Hyperion Reporting

Hi
Whenver I am trying to save a column of a report as a template , it is giving an error :
"The selected columns contain one or more of the items below that cannot be included in templates:
Invalid Input "
I am not sure what does this mean. Though I have already deselected the "Link to Source Object". Can anyone suggest ?

it may also worth cross checking below form doc:
a.If your row and column template contains formulas with external references (for
example, to cells outside of the selected row and column template), you are prompted
to modify those formulas before saving the row or column template.
Note: You can save a row and column template that contains cell formulas, as these can
be discarded. For more information, see step 9.c on page 115.
b. If a secondary database connection was specified within the row and column template,
a dialog box displays prompting you to continue saving the template. If you save the
template, the secondary database connection you specified in the row and column
template is discarded. The primary database connection is then used for the row and
column template.
c. If unsupported properties are found, an Information dialog box presents a list of
properties to discard before saving the template. For example, if the row and column
template contains a cell formula, you can choose to save the template without the
formula or not save the template.

Hyperion Reports - Row and Column templates

Sorry if this may be a bit basic but we are new to Hyperionreports. Currently we are going through a redesign process and washoping to get some viewpoints on the benefits of using row andcolumn templates within reports. I am looking at this option butgetting frustrated by the limitations around formatting, etc Are there any views out there on the preferred options. We havea particular style in design we need to include which is becomingdifficult when we use row and column templates

it may also worth cross checking below form doc:
a.If your row and column template contains formulas with external references (for
example, to cells outside of the selected row and column template), you are prompted
to modify those formulas before saving the row or column template.
Note: You can save a row and column template that contains cell formulas, as these can
be discarded. For more information, see step 9.c on page 115.
b. If a secondary database connection was specified within the row and column template,
a dialog box displays prompting you to continue saving the template. If you save the
template, the secondary database connection you specified in the row and column
template is discarded. The primary database connection is then used for the row and
column template.
c. If unsupported properties are found, an Information dialog box presents a list of
properties to discard before saving the template. For example, if the row and column
template contains a cell formula, you can choose to save the template without the
formula or not save the template.

Localization of CrossTab row and column label Crystal Report RPT file

Dear all,
Does anyone know how to support multiple locale texts (English and French) in CrossTab Row and Column Header labels and grand total labels? Is there a way to parameterize text objects CrossTab in one single Crystal Report RPT file to use some sort of locale resource file containing text string for different languages based on the users of RPT at runtime? The idea is to use one single RPT file to generate report for different locale text for CrossTab Row and Column abels and grand total labels instead of creating RPT files per locale?

Hi,
Does the database have a column that identifies the language? If it does, then you could create two separate cross-tabs and place them in different sections and conditionally suppress the section depending on the language from the database.
That's the only thing that can be done in my opinion.
-Abhilash

Report with multiple dimensions in Row and Column with EvEXP

Similar Messages

Maybe you are looking for