Report instance cann't run

PlatForm :IBM630
Operation System: AIX 5L
IAS version :10.1.2.0.2
Language :SIMPLIFIED CHINESE_CHINA.ZHS16GBK
opmnctl startall, report instance cann't run,and the report instance will restart every several minutes,then the form instance will restart following the report instance.
When ias installed in window system,all instances will work,
the same verison ias installed in AIX 5L,then the report install cann't work,why?
Do it need some special config?
The report instance work at same config at some time,one week later report called from form is not done,throw a error rep-300,
but the test.rdf can run in internet explorer address with "http://report_servername:7778/reports/rwservlet?report=test.rdf&destype=cache&desformat=pdf&userid=username/psw@db",
that is say the report instance can work.
How can I solve the problem?
Thanks for any help!
lind
email:[email protected]

please give me some advice.
thanks for any help.
user565112

Similar Messages

As10g ver10.1.2 report server cann't run in aix ver5.3 system

Hi,all
IBM computer
aix ver5.3 system
as10g ver10.1.2
Report server cann't run,other servers work well,
the same verion application server 10g be installed in windows system,all servers include report server work well.
Why report server don't work in aix system?
Thanks for any help!
Message was edited by:
user565112

Hello,
Note.298175.1 Reports Server Fails To Start on AIX 5.3 in-process and Standalone
Regards

Report instance view runs slow

I am just starting to migrate Crystal reports into BOE XI R3, using the CMC to add the reports from the file system. With each new report, I create a recurring schedule and a run-now instance.
The first four reports performed well. The fifth seemed to hang the browser when viewed. I eventually found the process (View Latest Instance or view from History) would complete in about 15 minutes. At about 12 minutes, IE generates a message:
A script on this page is causing Internet Explorer to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?
The CMC/browser status line shows it is trying to open crystalreportviewers / htmlbridge.jsp.
The instance takes about 1 minute to run in the CMC. The report uses about 60,000 records and produces about 4,500 pages.
In Crystal Enterprise 9, our current platform, the same instance is viewable in 2-3 seconds.
The first four reports migrated to XI3 run in less than a minute and are viewable in 5-6 seconds, have from 120 to 6,400 pages, and use the same dataset.
Not seeing any significant differences between the quicker and slower reports, I'm at a loss as to where BOE is failing. I'd appreciate some thoughts. Thanks!

Hello,
If your looking for way to improve performance for the infoview please review 1292411 - How to Improve the performance of Infoview in XI R3. Below is the resolution from that SAP note. I hope this resolves your issue.
Enable browser caching
Backup the exising web.xml <deploymant folder>\InfoViewApp\WEB-INF\web.xml (where deployment folder is the location the applications that have been deployed in your environment)
Open the web.xml file and search for the text :
<init-param>
<param-name>nocache</param-name>
<param-value>true</param-value>
</init-param>
modify the line <param-value>true</param-value> to <param-value>false</param-value>
save the file
restart your web application server
If you are using Secure Sockets Layer on Tomcat Application server then follow these instructions
Backup the exising context.xml <path to>\tomcat\conf\context.xml (where path to is the location where tomcat is installed)
Open the context.xml file and add the text:
<Value className="org.apache.catalina.authenticator.FormAuthenticator" disableProxyCaching="false" />
save the file
restart Tomcat

Incorrect date format on report instance

Hi,
I have a problem (well a question) relating the the instance detail information behind a report instance in BusinessObjects Enterprise XI3.1 SP2 FP2.5. On one of my servers I can view the history of a report thorough InfoView and then select the link in the 'Status' colum. This displays the 'Instance details' page. On this page the 'Creation Time', 'Expiry', etc. are shown in the format dd/mm/yy hh:mm:ss. But, on my other server the same page shows these records as 'mm/dd/yy hh:mm:ss'.
I suspect that there is a server setting to be made somewhere, but where?
Any ideas please?
Mike

Hello,
Found it. I run my SIA under a service account and not a user account. This service account was using the wrong Regional settings. When changed to the correct Regional settings the reports showed the dates in the correct format.
Thanks for looking.
Mike

Crystal Report Server XI recurring report instance is not viewable

I have scheduled a report to be run every morning, and each instance return status is "success". However, I encountered the following problem when I try to view instances of the report: There is a long time period of waiting (seems to be waiting for some kind of timeout), and then eventually the message: "A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server."
I also noticed that in event viewer (windows server 2003) I see many failure audits to login to the sql database, and the events contain the login used in my data source.
It's interesting to note, that when I run a single instance of the report "Now" there is no problem.
Some info about the report which may be relevant:
The report uses 2 formula fields to auto-parameterize 2 of the 5 parameters used by a subreport. The other 3 subreport parameters are set when scheduling the report.
The subreport uses a call into a stored procedure in a MS SQL server 2005 database to retrieve its records.
The 2 fields which are parameterized are datetime fields (StartTime, EndTime), and the main report is basically just a wrapper to only show the previous day.
JDBC data source to local Sql server instance.
Also, the crystal report server XI install uses the same sql server instance to store CMS data under a separate database.
I'm stumped on this.
Has anybody encountered this problem?
Is there a simpler way to auto-parameterize the report?
Why are the failure audits occurring when I view the instance of the report? Is this because the instance is setup to use RPT output format?
Are there logs I can look into aside from event viewer? I can't find anything that looks relevant under program files, but perhaps I missed something.
The failure audits would make more sense to me if it occurred with the other report instances, but some instances are shown correctly, and some just do this timeout thing.

Hello AV,
please look for the log files here:
drive:install folder\businessobjectsenterprise11\logging
by default c:\program files\business objects\business objects enterprise 11\logging
Please make sure that tracing is switched on for the individual server.
Please find [online docu |http://help.sap.com/businessobject/product_guides/boexir2/en/xir2_crs_install_win_en.pdf]here
Falk

Is it possible to deploy 2 SCOM 2012 R2 reporting in a SQL server which already has SCOM reporting of a different management group but with 2 different reporting instance.

Hi Experts,
I have a typical situation in the LAB environment. Hope some one helps. I have Installed a SCOM 2012 R2 with SQL 2012 SP1 in a single server (Management group 1). I have installed another management group on another server using this SQL server for its database
so i have everything going fine.
The first management group has its reporting installed in the SQL server. For the second i created a new named instance for that. But i cannot run the SCOM setup in the SQL server (Also holding the Management group 1 MS) as 1 st reporting is already there.
When i run the setup it is asking me to repair it. I don't get the install option so i can install the reporting for management group 2 in the named instance.
Default instance is being used by the 1st management group.
Can any one figure a possibility for installing 2 SCOM reporting services for different management groups in a same SQL 2012 server please.
Gautam.75801

Hi Yan Li,
Thank you for the reply. So as you are aware If i need to instal reporting, i need to run the SCOM 2012 R2 setup in the SQL server and select reporting and select the
instance and then mention the management server there right. I am not getting that option there it is asking me to remove or repair the existing installation as there is already a SCOM entire setup including reporting there. As it is a lab there is no problem
in testing. I have 2 reporting instances. Any suggestions for me on how to overcome this issue and deploy the second reporting in the new named instance ?
Below is the screenshot of the error what i am talking about when i run SCOM 2012 R2 setup to install reporting in the SQL server
When i click on add feature reporting is greyed out (As already 1st management groups reporting is installed)
When i click on remove or repair it
uninstalls the existing one. But i want both SCOM 2012 r2 reporting to be there(For both Management group). Is it possible ? If yes What is the trick to run the setup ?
Gautam.75801

Report Instance not getting started in Oracle Fusion Middleware 11g Report

Hi
Report Instance not getting started in Oracle Fusion Middleware 11g Report Instance Error
Rep-50125 Java.lang.nullpointerexception
I just installed Oracle Forms,Reports 11g 11.1.1.3.0 in my machine
Even I started opmnctl(Oracle Process Management Control). Its too running fine.
Please Guide me the settings need to do to start the report instance.
Regards
Murali N S

Hello,
Copy rwlpr.exe from Oracle_Home\bin to Oracle_Instance\config\reports\bin
Regards

Pass parameters to a report instance, or filter an instance of a report

Hi,
I am using Web Elements as linked reports with no problems for on demand reports but I need to run an instance of a report and then use a web elements/opendocument link to a subset of that data.
Basically I have a report on a college that drills down to campus and then course level. If I have an on demand subreport (via web elements link) to a course, linking course code then it brings up the 20 or so students on that report on the fly - taking < 30 seconds.
The problem is that I need this at Campus level as well. If I do it on the fly by linking on Campus instead of course, it times-out due to the large numbers of student records in the detail level.
If I change the link from the main report to point to the instance of the report I get all records, not just the campus I need (I get all campuses).
I then put in parameters to just select the required campus within the Instance of the report that is run for all campuses. The Instance is created with Parameters set to wildcard values, so that the parameters are available to pass values. I have also tried running the subreport without parameters, but it just displays all records and ignores parameters passed in (unsurprisingly).
I have had other reports working with linked parameters before, but only to the .rpt report - not to an instance.
The report works, but again all reports are displayed because when I checked the parameters they are shown as wildcards, as used when creating the instance, NOT the parameters I am trying to pass to the instance.
If I change the link to go to the Param Instance instead of the last instance (sInstance=Param), then I get an error because the report instance was created with wildcard parameters but the link has campus set, so there is no matching instance as far as Crystal is concerned.
An approximation of the link used is below:
http://...opendocument.aspx?sType=rpt&NAII=N&iDocID=1234&sInstance=Last&lsSAcadPeriod=07/08&lsSparamCampus=E
I cannot simply run an instance of the report for each Campus as there is are additional layers I have left out of this example for clarity (School, CampusType etc).
I need a solution that either allows parameters to work with instances of reports, or filter records in instances of reports.
I hope I have explained this clearly enough - please let me know if not, or if you have any other questions.
Many thanks in advance for any and all help.
Geoff Langdon.

hello arjhay,
webelements 2.3 will not work seemlessly, unfortunately, with xir3.
in xir3 the dhtml viewer has changes in it that are more web 2.0.
things that will not work and are deprecated for webelements & xir3 are the functions in WEViewer. this is due to the toolbar in the new viewer being a widget as opposed to a set of divs. however, opendocument for xir3 will allow one to switch off the toolbar using an opendocument paramter and will also allow one to switch off the new style tab bar.
the new dhtml viewer also does not encase report fields & functions etc. within a form tag. many webelements controls require a form so the new design for xir3 will be to put a new WEFormStart at the top of each report using webelements. what this does is basically start a form in the viewer and allow the controls to function properly.
so in summary there are 2 changes for xir3:
a) each report using webelements must have a WEFormStart function added to the beginning of the report
b) references to WEViewer must be removed from reports that are used in xir3
there will be a new 2.4 function suite out in several weeks and this will contain the new WEFormStart as well as other syntax changes to allow reports to work in xir3.
jw

Stop enter parameter for report instance

hello everyone:
I have a problem when i schedule one of my report:
this report contains a few parameters
when i schedule it, i pre-enter the parameters' value (at schedule -> parameter panel)
after report finish to run, the report instance gose to user's inbox.
the problem is:
when user try to view the report instance in their inbox, infoview ask user to enter parameter again. it only appear first time user view the instance, if user close the report and reopen it , it will skip the enter parameter step and get into the report stright away.
any ideas to stop it?
thanks

Hi,
Here are the steps :
Go to CMC > Select Report >click on Schedule report > click Default Settings option > Under Paramter Option > Uncheck Prompt While vewing Option > Save
Now enter the parameters and Schedule the report to the following destination.
Hope this will resolve the issue.
Regards,
Rameez
Edited by: ramzraja on Aug 23, 2011 7:22 AM

Two report instances created by one recurring scheduled instance

I have one scheduled recurring report instance that looks to be creating two seperate successful completed instances when it runs daily. There is only one report file and one recurring instance but each completed instance has seperate titles. How can one be removed / deleted? Or, is there some way to id how / where the second instance is be created?

Moved to businessobjects Forum

Report server cann't work

operation system:AIX 5.3
IBM computer
Application server 10.1.2.0.2
When user call report from form by RUN_REPORT_OBJECT procedure,most time work done,Today suddenly cann't run report,raise error
REP-300: OCI_INVALID_HANDLE. ==> SELECT ,then raise error REP-501 Unable to connect to the specified database,but form is ok,only call report from form is not running;
I restart report server, then report can work.I don't find the reason of report's error.
Why the report's server don't work?
How can I deal with the matter?
Thanks in advance!
lind

hello,have your problem solved?
i meet the same problem with u!
report server cann't work nonscheduled,everytime i killed the report engine,then everything became OK,but i don't know the cause!!
thank u!

Error while trying to view report instances

Application: BO XI 3.1
Crystal Reports 2008
While in BOE Infoview, users sometimes receive "Internal Error. Please contact system administrator" message as they try to view the report instances (from History tab and/or trying to refresh report). This seems to happen intermittently since sometimes users can run/view the reports as they log out of Infoview and log back in and it works normally again OR wait for a few minutes. THis is very strange and quite annoying having users log out and in all the time and sometimes they can't view the report instances or try to refresh the report with new parameters....Anyboy has experience with this type of behavior?
Thanks!

Do you have any service packs and/or fix packs installed?
What is the sizing of your BOBJ server environment(number of servers, memory etc)?
Regards,
Stratos

Filtering data in historic report instances

My goal is to filter data in a managed report instance without refreshing it. But I am having issues even viewing an instance. I am using Crystal Reports 2008 Server and the RAS API. Code below displays reports fine (i.e. SI_INSTANCE=0) but not report instances (i.e. SI_INSTANCE=1).
Approach 1, Use reportSource from PSReportFactory:
//Here is my query:
String reportQuery = "SELECT * FROM CI_INFOOBJECTS " + "WHERE SI_NAME = '" + report.getName() +
"' AND SI_KIND = '" + CeKind.CRYSTAL_REPORT + "' AND SI_INSTANCE = 1";
// Here I grab the latest report instance
IInfoObjects reports = iStore.query(reportQuery);
IInfoObject oInfoObject = (IInfoObject) reports.get(0);
IReportSourceFactory factoryPS = (IReportSourceFactory)es.getService("PSReportFactory");
Object reportSource = factoryPS.openReportSource((oInfoObject), getLocale());
// Here I prep and attempt to display
viewer.setReportSource( reportSource );
viewer.setDatabaseLogonInfos( newDBConnectionInfos() );
viewer.setEnableLogonPrompt( false );
viewer.setBestFitPage(true);
viewer.setOwnPage(false);
viewer.processHttpRequest();
processHttpRequest above throws:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Invalid job number.---- Error code:-2147215357 Error code name:internal
Approach 2, use ReportClientDocument from RASReportFactory...
// Same query as above:
String reportQuery = "SELECT * FROM CI_INFOOBJECTS " + "WHERE SI_NAME = '" + report.getName() +
"' AND SI_KIND = '" + CeKind.CRYSTAL_REPORT + "' AND SI_INSTANCE = 1";
// Here I grab the latest report instance
IInfoObjects reports = iStore.query(reportQuery);
IInfoObject oInfoObject = (IInfoObject) reports.get(0);
IReportAppFactory raf = (IReportAppFactory)es.getService("RASReportFactory");
ReportClientDocument rcd = raf.openDocument(oInfoObject, OpenReportOptions._openAsReadOnly, getLocale());
// Here I prep and attempt to display
viewer.setReportSource(rcd.getReportSource());
This approach throws an exception from
raf.openDocument()
with error:
Cannot open report document. --- Item SI_NEWOBJECT was not found in the collection.
Of these approaches I prefer the second as I can potentially filter the data.
Any ideas or help greatly appreciated as I am new to crystal reports.
Edited by: jhall3483 on May 14, 2010 11:24 PM
Edited by: jhall3483 on May 14, 2010 11:27 PM

Good call Ted, and thanks for the reply! I had a bunch of Failed instances and it was choking on a failed one.
Now that I have identified a successful instance, I'm having trouble displaying the historical report data.
When I attempt to display using the PSReportFactory, from first approach above, it displays the report but I
don't get historic data, i.e. it is refreshing from the database. Of course historic data display works in the
CMC so I'm sure it must be possible. How can I get the viewer to show the data as it was when the report
was run?
Also, using the preferred RASReportFactory, from second approach, I get the following exception:
ReportSDKServerException: Failed to retrieve initial report values. For example, the database information for this report could be incomplete or
incorrect. This is a configuration problem. Please contact your system administrator.---- Error code:-2147467259 Error code name:failed
This seems odd as I am passing the database logon infos to the viewer, and it works the other way:
viewer.setDatabaseLogonInfos( newDBConnectionInfos() );
viewer.setEnableLogonPrompt( false );
Any ideas about how I can get it to work this way?
Thanks,
--Jeff.
Edited by: jhall3483 on May 16, 2010 9:25 PM
Edited by: jhall3483 on May 16, 2010 9:26 PM

Can the width of a report that has been run in the background be increased?

Hello Experts,
How can I increase the width of a report that I have run in the background so that it does not wrap text to the next line?
I have been running the same HR report successfully in the background for many months. Today I ran it with the same parameters that I've always used and when I retrieve it from my Own Job Spool - System | Own Spool Request | Display Contents the last field is wrapped to the next line.
Thanks.
Regards,
Jeanette

Jeanette,
Thereu2019s another possibility if Tedu2019s suggestion doesnu2019t work. When you look at your spool requests, thereu2019s an icon on the toolbar next to the eyeglasses that looks like a yellow rectangular callout. Itu2019s called u201CDisplay in Maximum Widthu201D. Select the Spool no. to display and then press this icon. Shift + F4 is the shortcut.
Regards,
Howard

Report job is not run at scheduled time

OS：WindowsServer2008R2
Oracle BI 11g(11.1.1.6.0)
CT defined a report job
====
Frequency Daily
Start 2013/01/14 AM 06:00:00
End 2020/01/14 PM 11:59:00
timezone [GMT+09:00]Osaka,Tokyo
====
but he found the report is not run at 06:00:00
at 2013/01/16 08:50AM,he login to BIP,and got to Report Job history.
he found the staus of this report is running and
start processing is 2013/01/16 08:51:32AM
It seems the report job is run after login.
In CT's environment , the followinig work are done Every Day
22:00　stop OracleBI　　(opmnctl.bat→stopManagedWebLogic.cmd→stopWebLogic.cmd）
00:00　restart server
05:45　clear cashe (nQCmd.exe)
05:45　start OracleBI(BI_START.bat)
06:00　report job is not run for no mail received.-->★
Could you tell me why the report job are not run at 06:00AM
Does any one can give me some advice on investigating this issue, which information are needed?

Any suggestion on this issue?

Report instance cann't run

Similar Messages

Maybe you are looking for