Report layout in french not displaying french characters properly

Hello,
I have a report layout that I have created with a 3rd party tool (j4ldesigner). All it has on it is one label (displaying a couple of french characters as a test
). Within APEX I have created a test report layout and imported it as a named column report layout type. I then created a very simple report query and associated it with the test layout. When I run the test report, the layout launches but the characters éâ appear as Ã©Ã¢.
So I'm thinking this has to do with language somehow. I have other reports which are generic named column reports, but those are manually entered and seem to work fine. The named column layout is imported, and I'm assuming some sort of conversion is happening where those special french language characters are concerned.
The fact is this is a 11.2.0.3 database. I was assuming the language set would use the standard language librariy files which come with 11G (ie $ORACLE_HOME/nls/data) so I wouldn't have an issue. Since it is not working, do I need to use the language files associated with 9idata? Or is there an init.ora parameter I am missing?

Hello,
Within APEX I have created a test report layout and imported it as a named column report layout type.Make sure the Report Layout File is in UTF-8 encoding. Most of the times, the issue is with file encoding type.
If you use text editors like [url http://notepad-plus-plus.org]notepad++ you can see and convert from one encoding to other.
Regards,
Hari

Similar Messages

Illustrator CS6 is not displaying unicode characters properly.

I need to access certain unicode characters (namely the x/8 fractions). I have the appropriate font installed, and the characters display in every other program on the machine, but they are not displaying correctly in Illustrator. If I type the characters in using alt codes, the 3/8 character displays as "\", the 1/8 character displays as "[", etc. Is there some setting I need to change to enable support for Unicode characters?
*UPDATE*
If I type the character in another program, copy it, and paste it into Illustrator, it shows up as a box with an X through it. If I highlight the box and change the font to one that supports the character, then the character does display correctly. This is, however, quite inconvenient. Is there a way to type the character directly into Illustrator?
Message was edited by: NovakDamien

I use the following method...
Mike

Dynamic Text Field is not displaying foreign characters... HELP!

I have a dynamic text field that is not displaying foreign characters properly. They appear as boxes.
Here's what I've tried.
Under properties for the text field, I clicked on the embed characters button. In there, I pasted all the special characters I would need and clicked okay. Shouldn't this be enough for the text to display properly? What am I missing? Please help...

More info: I'm noticing that in the actual dynamic text field in my .FLA file, if I type a foreign character like é, it pops up as a block. My family font is set to New Caledonia... is it possible that New Caledonia doesn't have those particular glyphs? The thing that doesn't make sense to me though is, last year when I made this card, it worked fine with New Caledonia... Any help is greatly appreciated!!

Chinese Data Fields not displaying Chinese Characters

Hi There,
Wonder if someone can help. We are currently running reports in Crystal 8.5 but are in the process of upgrading our business systems to latest version and this includes converting all our Crystal 8.5 reports to Crystal Reports XI R2 SP4.
During the process we are experiencing some difficulties in displaying Chinese characters, which have previously worked fine in version 8.5. The system we are running Crystal from has Oracle client 11 installed and the OS system locale is set to Chinese PRC. Our application is displaying Chinese characters properly and if we have any text fields on the report, these are also displaying properly when changing Font to Arial Unicode MS. The only thing that doesn't display properly is the field data which after checking has the correct Chinese data stored in the database. For some reason Crystal 11.5 doesn't seem to be transferring the data correctly which points to some sort of encoding problem.
Is there something I am missing here or is there something else I need to install for this to work?
Any hep would be appreciated.

What is your Oracle database's language set? Is it set to UTF-8 or non UTF-8 (such as American_America.WE8ISO8859P1" )?
There is a similar issue tracked under ID ADAPT00528561 (Crystal cannot display non-UTF-8 Chinese characters from an Oracle database ) and has been fixed and you should set the following registry key to make it effective:
Set the following registry key "UseOSLocaleForConversion" to "Yes" under:
HKEY_LOCAL_MACHINE\Software\Business Objects\Suite 11.5\Crystal Reports\Database\Oracle

SQL Report Viewer Web Part Not displaying Report

I have just completed updating an old report using report builder 3.0. I have added it to SharePoint Designer but have not replaced the old report file.
Any help is greatly appreciated!!
All I did was export the old report from sharepoint designer to my desktop. Then opened it with Report Builder 3.0- made changes to the report and saved it with a different name (for safety in case i break things) and then upload it back to the same place where
the old report was located using SP Designer. I then went back to the site in sharepoint that is displaying the old report, and changed the URL path in the SQL report viewer to the new report.
Now the SQL Report Viewer web part isn't showing anything (blank)

Dear Form Moderator,
This question is already asked in sharepoint forum so please don't move this sharepoint forum. Here is link of thread:
https://social.technet.microsoft.com/Forums/en-US/3796da85-fbb4-4722-a5d0-724859f7d4ae/sql-report-viewer-web-part-not-displaying-report?forum=sharepointgeneralprevious
Here is the one more duplicate thread link in same forum. So either you can merge both OR delete one.
https://social.technet.microsoft.com/Forums/en-US/259d2586-ed4a-4f47-a808-877d4621d9f2/report-builder-30-sql-report-viewer-web-part-not-displaying-report-in-sharepoint?forum=sqlreportingservices
[SharePoint Forum Moderator]
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Safari does not display pdf's properly...

MacMini 2010, OS 10.6.8, Safari 5.1.10
Safari is not displaying pdf's properly that I can see perfectly in Chrome and Firefox...I get this weird pattern of black shapes....
Works OK on my laptop OS 10.7.5, Safari 6.1.1 (after I allow it to access Adobe Reader...)
Any ideas? The pdfs are printed/made from MS word docs. The header is a placed image. Also attaching screen shot from FF.
Thanks

Try this ...
Open a Finder window then from the menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Internet Plug-Ins
Click Go.
If you see the: AdobePDFViewer plugin in the Internet Plug-Ins folder, move it to the trash.
Restart your Mac and try opening a PDF file.

Problem with Loader Components, can not display my forms properly

Here is the problem (my God, my customer waiting for his web
site:( ... ) I have a form made in CoffeeCup Flash Form Builder
(Nice one...).Now this form with fields like name, sec name age,
etc I want it to apear into my main screen when I press the button
"Reservation" and then the customer could fill the fields and sent
it to my mail. I tryed with the Loader Component, I mean when I
press the button then starts "playing" the form.swf. BUT the Loader
can not display the form properly specialy thinks like drop down
menus in the form, or check boxes....It just show me the
form....The Flash Form Builder gives me 4 files like: form.swf,
form.html, form.php and form.xml. Any solution on how my customers
complete this form with no problems?
THANK YOU A LOT!

Dear,
You have to following these step to run form on firefox,
Run the following file,
1) C:\DevSuiteHome_1\jinit\jinit.exe
2) jvm.dll copy this file to the following path,
C:\Program Files\Oracle\JInitiator 1.3.1.22\bin\hotspot
3) And firefox connection settiong with 'No-Proxy'
The above setting it will help full you to run your form on firefox.
Thank you,

Safari 3.2.1 for XP does not display all graphics properly

Safari 3.2.1 for XP does not display all graphics properly, including the Apple Support Website http://www.apple.com/support/.

Maybe this will also help:
If your Safari won't open, one or more of the following procedures should fix it:
1. Go to Home/Library/Safari/ folder and remove the following two files:
• history.plist
• lastsession.plist
(Safari may not load properly If these two files are corrupted.)
2. Go to Home/Library/Caches/Metadata/Safari/ and remove the contents of that folder.
(These are just webhistory files and are not required for Safari to run. However, similar to preference files, problems can arise if they have become corrupt.)
3. Locate the cookies.plist file that's located in the Home/Library/Cookies/ folder and remove it.
(Again, faults in stored cookies may interfere with Safari's launch.)
4. Check whether any of your third-party internet plug-ins may be interfering with the launch of Safari by carefully moving them to the desktop (do NOT delete them at this stage). You can find these in two places:
Home/Library/Internet Plug-Ins/ folder, and Global plug-ins are located in the Macintosh HD/Library/Internet Plug-ins/ folder.
Restart Safari and place them back in the correct folders, one at a time, closing and re-opening Safari each time. If you discover that one of them was causing the problem with launching Safari, trash it and download and install a fresh copy.

IPod Nano not displaying Twi characters

My iPod Nano is not displaying certain Twi characters in the lyrics section even though in the lyrics sectino of my iTunes, it is being displayed correctly. Below, I have pasted an example of the lyrics for this Twi (a Ghanaian language) song. I don't know if they will display correctly on the forum. The full lyrics can be found on this webpage: http://africathink.ghanathink.org/node/229
Any suggestions for help?
Lyrics: Wai deɛ ɔsua, menim sɛ ɔsua Nanso ɔno ara na mepɛ Wabie biribi so akyerɛ me Ama mereka ahyɛ a, ɛnhyɛ
PowerBook 15.2 1.25Ghz Mac OS X (10.4.4)

See this page...
http://www.apple.com/ipod/specs.html
From that page...
Languages: Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese and Turkish
Additional language support for display of song, album and artist information: Bulgarian, Croatian, Romanian, Serbian, Slovak, Slovenian and Ukrainian
btabz

Empty report with pagination, rows not displayed

Dear HTML DB Team,
We have in our reports the next error: An empty report with pagination appears , no rows not displayed
The test case to reproduce the error:
1. Create "SQL report" with next report attributes in "Layout and Pagination"
a. Row ranges 1-15 16-30 in select list (with pagination)
b. Number of Rows : 15
c. Number of Rows (Item): empty
d. Max Row Count: empty
2. Fill the table on which the report is based with 17 rows
3. Go to the 2nd page of the report , pagination rows 16-17 of 17
4. Remove 2 rows from the table, refresh report
5, The pagination shows now 1 - 15 of 15 rows
- no rows displayed
- no "previous button" ( only )
- no way to get the rows displayed, except logging out and in again
Any suggestions?
Erik

Hello,
i encountered the same problem while developing in HTMLDB.
In application builder, i select application Application 106, then click on items, then click next ( the application has 22 global items). Now i want to take a look at the global items in application 105 (there are only 5). In the menu i click Builder - Application 106, select application 105 from Available Applications, click Go and Items. It shows no rows, but says that is displaying rows 1-5, and offers a Next button. No way to see/modify the items unless make a new session or go back to Application 106, Click Previous to see the first page of global items and then again switch to Appication 105 or click to the next button and then manually set pg_min_row=1 in URL.
One more question - is this forum the right place to report bug suspicions, or is there some other special place for that?
Best regards,
Andres

[Bug Report] CR4E V2: Exported PDF displays Japanese characters incorrectly

We now plan to transport a legacy application from VB to Java with Crystal Reports for Eclipse. It is required to export report as PDF file, but result PDFs display Japanese characters incorrectly for field with some mostly used Japanese fonts (MS Gothic & Mincho).
Here is our sample Crystal Reports project: [download related resources here|http://sites.google.com/site/cr4eexportpdf/example-of-cr4e-export-pdf]
1. PDFExportSample.rpt located under ..\src contains fields with different Japanese fonts.
2. Run SampleViewerFrameClient#main(..) to open a Java Report Viewer:
    a) At zoom rate 100%, everything is ok.
    b) Change zoom rate to 200% or 50%, some fields in Japanese font collapse.
    c) Export to PDF file,
         * Fonts "MS Gothic & Mincho": both ASCII & Japanese characters failed.
         * Fonts "Meiryo & HGKyokashotai": everything works well.
         * Open PDF properties, you will see all fonts are embedded with built-in encoding.
         * Interest to note that copy collapsed Japanese characters from Acrobat Reader, then
           paste them into a Notepad window, Notepad will show the correct Japanese characters anyway.
           It seems PDF export in CR4E mistaking to choose right typeface for Japanese characters
           from some TTF file.
3. Open PDFExportSample.rpt in Crystal Report 2008 Designer (trial version), and export it as PDF.
    The result PDF displays both ASCII & Japanese characters without any problem.
Test environment as below:
* Windows XP Professional SP3 (Japanese) with MS Office which including extra fonts (i.e. HGKyokashotai)
* Font version: MS Gothic, Mincho, Meiryo, all in Version 5.0
    You can download MS Meiryo from Microsoft's Site:
    http://www.microsoft.com/downloads/details.aspx?familyid=F7D758D2-46FF-4C55-92F2-69AE834AC928&displaylang=en)
* Eclipse 3.5.2
* Crystal Reports for Eclipse, V2, 12.2.207.r916
Can this problem be fixed? If yes how long will it take to release a patch?
We really looking forward to a solution before abandoning CR4E.
Thanks for any reply.

I have created a [simple PDF file|http://sites.google.com/site/cr4eexportpdf/inside-the-pdf/simple.pdf?attredirects=0&d=1] exported from CR4E. It is expected to display "漢字" (or in unicode as "\u6F22\u5B57"), but instead being rendered in different ones of "殱塸" (in unicode as "\u6BB1\u5878").
Look inside into this simple PDF file (you can just open it with your favorite text editor), here is its page content:
8 0 obj
<</Filter [ /FlateDecode ] /Length 120>>
stream ... endstream
endobj
Decode this stream, we get:
/DeviceRGB cs
/DeviceRGB CS
q
1 0 0 1 0 841.7 cm
13 -13 569.2 -815.7 re W n
BT
1 0 0 1 25.75 -105.6 Tm     <-- text position
0 Tr
/ttf0 10 Tf                 <-- apply font
0 0 0 sc
( !)Tj                      <-- show glyphs [20, 21], which index is to embedded TrueType font subset
ET
Q
The only embeded font subset is defined as:
9 0 obj /ttf0 endobj
10 0 obj /AAAAAA+MSGothic endobj
11 0 obj
<< /BaseFont /AAAAAA+MSGothic
/FirstChar 32
/FontDescriptor 13 0 R
/LastChar 33
/Subtype /TrueType
/ToUnicode 18 0 R                            <-- point to a CMap object
/Type /Font
/Widths 17 0 R >>
endobj
12 0 obj [ 0 -140 1000 859 ] endobj
13 0 obj
<< /Ascent 860
/CapHeight 1001
/Descent -141
/Flags 4
/FontBBox 12 0 R
/FontFile2 14 0 R                            <-- point to an embedded TrueType font subset
/FontName /AAAAAA+MSGothic
/ItalicAngle 0
/MissingWidth 1000
/StemV 0
/Type /FontDescriptor >>
endobj
The CMap object after decoded is:
18 0 obj
/CIDInit /ProcSet findresource begin 12 dict begin begincmap /CIDSystemInfo <<
/Registry (AAAAAB+MSGothic) /Ordering (UCS) /Supplement 0 >> def
/CMapName /AAAAAB+MSGothic def
1 begincodespacerange <20> <21> endcodespacerange
2 beginbfrange
<20> <20> <6f22>                         <-- "u6F22"
<21> <21> <5b57>                         <-- "u5B57"
endbfrange
endcmap CMapName currentdict /CMap defineresource pop end end
endobj
I can write out the embedded TrueType font subset (= "14 0 obj") to a file named "[embedded.ttc|http://sites.google.com/site/cr4eexportpdf/inside-the-pdf/embedded.ttf?attredirects=0&d=1]", which is really a tiny TrueType font file containing only the wrong typefaces for "漢" & "字". It seems everything OK except CR4E failed to choose right typefaces from the TrueType file (msgothic.ttc).
Is it any help? I am looking forward to any solution.

PDF Output Not Displaying Turkish Characters

Hi,
We've configured BI 7.0 System with an Standalone Portal+BI Java System running both on SP11 Stack without problem.
For BI Web Reports, we're taking PDF Outputs and getting Turkish Character Problems. On the screen we can see everything correct, even Excel Export displays Turkish Characters without problem but PDF Export is wrong. I've checked the "<b>Note 1007116 - Form output in incorrect language</b>" but not sure whcih form to check? And also if this is the problem?
If anyone can help us, it'll be great

Hi Ade,
I tried all possible combinations of fetching the data. Writing a PL/SQL function and assigning the data to placeholder in before report trigger. Also, tried to use a query and then assign the data to placeholder through formula column. Directly assigining the database column on field without using placeholder.
While trying all the above options, I ensured that width is set to 4000 characters.
But all in vain. It works fine for 2000 characters but not able to print 4000 characters.
Regards,
Mitiksha

Abap webdynpro layout and application not displayed

Hi Gurus ,
    We have upgraded the SAP HR system from ECC6.3 to ECC6.4 and netweaver from 7.0 to 7.1 .
    Following are the list of error in EHP4 system ,
                1) Layout of ABAP Webdynpro Component are not displayed .
                2) Any ABAP WEBDYNPRO Application is not displayed by tesing in SAP-R3 and also in ESS .
    error are as follows while trying to view layout in abap webdynpro application :
    http://dv.hr.co.in:4567/sap/bc/wdvd/painting.html?_vdrespkey=4IS29CT7NDRIOI511AFI0R1E3&_vdframe=painting&sap-client=435
      If any one have information for this kindly let me know .
Thanks :
Vishwas
Edited by: vishwassap on Aug 12, 2010 7:17 AM

Hi,
   Thanks for reply ,
   Above mention is not link ,its an error in pop up inside layout of view .
I resolve this problem by deploying mime object by program in R/3 , so that i can able to view layout .
But still application is not displayed it shows error like
1) 'UCF_LoadingPlaceHolder' is undefinged by testing through R/3 and starting view is not opened .
2) 'UCF_Image' is undefined by testing through portal but starting view is opened here .
3) while navigating from one view to any view or window is not possible , it gives error
4) When I navigate from one view to other .
The following error text was processed in the system D36 : The ASSERT condition was violated.
The error occurred on the application server RELSRMSR2_D36_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DISPATCH_NW7_EVENT of program CL_NW7_VIEW_ELEMENT_ADAPTER===CP
Method: IF_WDR_CLIENT~GET_CLIENT_UPDATES of program CL_WDR_CLIENT_SSR_LS==========CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Edited by: vishwassap on Aug 13, 2010 8:31 AM

Abap wd layout and application not displayed

Hi Gurus ,
We have upgraded the SAP HR system from ECC6.3 to ECC6.4 and netweaver from 7.0 to 7.1 .
Following are the list of error in EHP4 system ,
1) Layout of ABAP Webdynpro Component are not displayed .
2) Any ABAP WEBDYNPRO Application is not displayed by tesing in SAP-R3 and also in ESS .
error are as follows while trying to view layout in abap webdynpro application :
http://dv.hr.co.in:4567/sap/bc/wdvd/painting.html?_vdrespkey=4IS29CT7NDRIOI511AFI0R1E3&_vdframe=painting&sap-client=435
If any one have information for this kindly let me know .
Thanks :
Vishwas

Hi,
Thanks for reply ,
i am trying to resolve issue and not to confused people anyway ,
I resolve half problem by deploying mime object by program in R/3 , so that i can able to view layout .
But still application is not displayed it shows error like
1) 'UCF_LoadingPlaceHolder' is undefinged by testing through R/3 and starting view is not opened .
2) 'UCF_Image' is undefined by testing through portal but starting view is opened here .
3) while navigating from one view to any view or window is not possible , it gives error
4) When I navigate from one view to other .
The following error text was processed in the system D36 : The ASSERT condition was violated.
The error occurred on the application server RELSRMSR2_D36_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DISPATCH_NW7_EVENT of program CL_NW7_VIEW_ELEMENT_ADAPTER===CP
Method: IF_WDR_CLIENT~GET_CLIENT_UPDATES of program CL_WDR_CLIENT_SSR_LS==========CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Edited by: vishwassap on Aug 13, 2010 8:28 AM

Substitution string used in custom Report column name does not display in PDF version of report

I am using Apex 4.2.6.00.03, Apex Listener 2 via Glassfish4 and have set up all my applications and reports on this system. We previously used Oracle 10.2, with Apache with a custom fopping document.
My issue is that I have a report that has custom column headings using a substitution string to pull in the begin or end date for the report. When the report is run and displayed, the column headings appropriately display the date. However, when I try to set up the Print to PDF option, the column headings are not displaying correctly.
Is it possible to use a substitution string in the column heading? I am able to use the substitution string in the Page Header and Page Footer and those display correctly.
In the Report Attributes setup I have set the "Strip HTML" to Yes and I have four columns that are using the &"ITEM NAME". string. See below for actual display:
The report column headings in APEX displays correctly (bold is the substitution detail):
Fund Account Description Balance 07/01/2014 Budget/Goal FY 14-15 YTD Actual 02/28/2015 Ending Balance 02/28/2015
In the Print Attributes setup, when I get to the Report Columns section, the Heading column displays the headings as set up in the Report Attributes custom and I am not able to edit these names. See below:
In the version of the report that is Printed to PDF I get the following for display:
Fund Account Description Balance %26amp;P347_BEGIN_DATE. Budget/Goal %26amp;P347_FY. YTD Actual %26amp;P347_END_DATE. Ending Balance %26amp;P347_END_DATE.
Any assistance would be greatly appreciated.
Thanks,
Pat

First, the misspelled word is a test object and not data.
Second, all data display correctly.
Third, text object is displaying the old misspelled word.
Fourth, I have eliminated the possibility that problems in of my pdf export routine cause this issue by exporting directly from Crystal Reports Viewer. I print the report to the crystal report viewer. The report looks good. The text object is spelled correctly. Then I click the Crystal Reports viewer's export button in the left upper corner and I export to both EXCEL and PDF. The excel export looks good. The pdf export is misspelled. All the export occurs internally in Crystal reports.
Fifth, I found outthat all users who have this problem have the ADOBE PDF writer installed. I am just suspicious that ADOBE writer is interferring with Crystal export
Sixth, I cannot recreate this problem on any of our development and test machines. It only happens on end-user laptops.
Seventh, I changed the name of the report that had this problem and created a new version and installed on end-user laptop. The behaviour still persists. User saved the report as both RPT and PDF. RPT export looks good. PDF version has the spelling problem. Data on both reports is up-to-date and good. I copied the same RPT export to my PC and exported it to PDF, the pdf looks good. That is why I think something on the end-users laptops is causing the export to use some cached template.
One more thing I did was to change the report name in VB.NET project, recreated a new package and installed on end-user's laptop. The same exact problem is still there.
I have worked with Crystal Reports more than 15 years and I have never such a weird behaviour before. I know this sounds very weird. We are all baffled by what is happening.

Report layout in french not displaying french characters properly

Similar Messages

Maybe you are looking for