Empty report with pagination, rows not displayed

Dear HTML DB Team,
We have in our reports the next error: An empty report with pagination appears , no rows not displayed
The test case to reproduce the error:
1. Create "SQL report" with next report attributes in "Layout and Pagination"
a. Row ranges 1-15 16-30 in select list (with pagination)
b. Number of Rows : 15
c. Number of Rows (Item): empty
d. Max Row Count: empty
2. Fill the table on which the report is based with 17 rows
3. Go to the 2nd page of the report , pagination rows 16-17 of 17
4. Remove 2 rows from the table, refresh report
5, The pagination shows now 1 - 15 of 15 rows
- no rows displayed
- no "previous button" ( only )
- no way to get the rows displayed, except logging out and in again
Any suggestions?
Erik

Hello,
i encountered the same problem while developing in HTMLDB.
In application builder, i select application Application 106, then click on items, then click next ( the application has 22 global items). Now i want to take a look at the global items in application 105 (there are only 5). In the menu i click Builder - Application 106, select application 105 from Available Applications, click Go and Items. It shows no rows, but says that is displaying rows 1-5, and offers a Next button. No way to see/modify the items unless make a new session or go back to Application 106, Click Previous to see the first page of global items and then again switch to Appication 105 or click to the next button and then manually set pg_min_row=1 in URL.
One more question - is this forum the right place to report bug suspicions, or is there some other special place for that?
Best regards,
Andres

Similar Messages

Problem of POP LOV in a SQL Report with pagination

I am using a pop up lov (along with some other fields), HTMLDB_ITEM.POPUP_FROM_LOV(5, null, 'EMPLOYEE_LIST', '20', '50')), in a sql report. This is a report with pagination. Whenever I select any value from pop up lov on first page of the report it gets populated properly in the corresponding text field. But from second page onwards it doesnt populate any value.
For example, my report fetches a total of 50 rows, of which I am displaying 15 at a time. The popup lov comes with a text field for each row. Whenever I do select from popup lov for 1-15 rows which come on page 1, the values come up in the text field properly, but for rows 16-30 on second page, 31-45 on third 46-50 on fourth the values do not get populated. When I changed the pagination settings to display 40 rows..the values were still coming properly on page 1(1-40 rows) and not on the next page. Any clues how to resolve this problem?

good find. this is a bug that has already been identified and will be corrected in the upcoming patch release for htmldb. a good work-around for now is to use the equivalent declarative options in the tool. so rather than coding your query like...
select ename , HTMLDB_ITEM.POPUP_FROM_LOV(2, null, 'DEPARTMENT', '20', '50') as "department" from emp
...just code it like this...
select ename , null as "department" from emp
...and then use the column attributes screen for your "department" column to indicate that you'd like that col to be rendered as a "Popup LOV (named LOV)" using your DEPARTMENT list of values.
hope this helps,
raj

SQL Report Viewer Web Part Not displaying Report

I have just completed updating an old report using report builder 3.0. I have added it to SharePoint Designer but have not replaced the old report file.
Any help is greatly appreciated!!
All I did was export the old report from sharepoint designer to my desktop. Then opened it with Report Builder 3.0- made changes to the report and saved it with a different name (for safety in case i break things) and then upload it back to the same place where
the old report was located using SP Designer. I then went back to the site in sharepoint that is displaying the old report, and changed the URL path in the SQL report viewer to the new report.
Now the SQL Report Viewer web part isn't showing anything (blank)

Dear Form Moderator,
This question is already asked in sharepoint forum so please don't move this sharepoint forum. Here is link of thread:
https://social.technet.microsoft.com/Forums/en-US/3796da85-fbb4-4722-a5d0-724859f7d4ae/sql-report-viewer-web-part-not-displaying-report?forum=sharepointgeneralprevious
Here is the one more duplicate thread link in same forum. So either you can merge both OR delete one.
https://social.technet.microsoft.com/Forums/en-US/259d2586-ed4a-4f47-a808-877d4621d9f2/report-builder-30-sql-report-viewer-web-part-not-displaying-report-in-sharepoint?forum=sqlreportingservices
[SharePoint Forum Moderator]
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Reports MB5W / MB5L are not displaying the individual material lines

Hi All,
We are encountering a problem in MB5W/MB5L reports. When we are executing these report with the option checked "Display Indiv. Material Lines", system is not displaying the details material wise.
It is just showing the GL wise value of Material ccy and Stock account ccy. It was running fine when we ran the same reports in Feb for Jan 2014.
Do you have any idea why system is behaving like this please?
Thanks,

Hi Narasimhulu,
In report MB5W/MB5L, click the "Current display variant icon" in the next pop-up screen click the position tab and check whether all the material related fields are added or not. If not, move the fields into display list and then check.
Thanks

Interactive report with pagination

Hi,
i have create an interactive report with pagination .i have follow instraction form
[http://dbswh.webhop.net/apex/f?p=BLOG:READCAT:0::::CATEGORY:10800346812869]
i have put JQuary in Page HTML HEADER .
Now it show me that code in header in my page .No value in my pagination select list.
How can i solve this problem.
Thanks

Hi friends,
i have sort out that problem,
i have jus put JQuary code in JavaScript Section.
Thanks

Iphone 4s has anyone had a problen with text messages not displaying

has anyway had a problem with text messages not displaying?

helplessmom,
We want to make sure all of your messages show up for you! What issues are you having with them? Do they come to the phone at all? Is it only messages from certain people having issues or all?
AndrewT_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Number of currently displayed rows in report with pagination?

Maybe I'm thinking to complicated, but ...
In my report I use the HTMLDB_ITEM.CHECKBOX function in order to display a checkbox for each row:
HTMLDB_ITEM.CHECKBOX(1,"ID",NULL,:P311_ASSIGNED,':') " "
Some of the checkboxes are selected depending on whether there is an entry for them in a database table.
As the report returns hundreds of rows, I use pagination (e.g. 15 rows per page).
After checking/unchecking the checkboxes and submitting the page by clicking the save button, I want to do the following: For each row CURRENTLY DISPLAYED on the screen (1) check, whether its checkbox is currently checked or not (2a) If it is checked and there is not yet an entry -> add row to the db table (2b) If it is unchecked and there is an entry in the db table -> remove row from db table.
How can I, on the server side, find out which rows (row ids) are currently displayed (using pagination), so that I check each of the currently displayed row ids for their existence in the database table? Is there any item stored on the server side, which tells me the row number of the first row currently displayed? Is there an item I can refer to, which tells me the amount of rows, which are displayed on one page?
Your help would be very much appreciated!
Konrad

Hi Konrad,
I will jump in. :-) Just have a few minutes before a meeting.
I think you don't have to make it that complicated, where you have to know the current pagination.
1) Your HTMLDB_ITEM.CHECKBOX has to contain as checked value #ROWNUM# as the row selector would do it.
2) You have to create a hidden item where you store your customer id
3) create another hidden item where you store if the customer has already the assignment
4) In your process you are now able to loop through your arrays.
DECLARE
    vRowNumber BINARY_INTEGER;
    vFound BOOLEAN;
BEGIN
    -- insert new event assignments
    FOR ii IN 1 .. WWV_Flow.g_f01.COUNT -- your checkbox
    LOOP
        vRowNumber := WWV_Flow.g_f01(ii);
        -- no assignment yet?
        IF WWV_Flow.g_f03(vRowNumber) IS NULL -- your hidden field where you store if you have an assmnt
        THEN
            INSERT INTO xxx VALUES (WWV_Flow.g_f02(vRowNumber)); -- your customer id
        END IF;
    END LOOP;
    -- delete old event assignments
    FOR ii IN 1 .. WWV_Flow.g_f03.COUNT -- your hidden field where you store if you have an assmnt
    LOOP
        -- only if the event was already assigned
        IF WWV_Flow.g_f03(ii) IS NOT NULL
        THEN
            vFound := FALSE;
            FOR jj IN 1 .. WWV_Flow.g_f01.COUNT -- your checkbox
            LOOP
                -- is the event still checked?
                IF WWV_Flow.g_f01(jj) = ii
                THEN
                    vFound := TRUE;
                    EXIT;
                END IF;
            END LOOP;
            IF NOT vFound
            THEN
                DELETE xxx WHERE CUSTOMER_ID = WWV_Flow.g_f02(ii);
            END IF;
        END IF;
    END LOOP;
END LOOP;Haven't tested the code, but I think it should show the idea.
Hope that helps
Patrick
Check out my APEX-blog: http://inside-apex.blogspot.com

All Rows not displaying

Hi
i have two regions. Region 1 is check box region where you check the columns and region2 displays report of checked columns. Region two is displayed when submit button is pressed in region1
Now I have report is set up with 15 rows per page so when I click on next page, it region 2 does not appear.
Can somebody help me
Thanks
Sunil

That what I am doing.
Here's the code to prepare the sql statement
DECLARE
p_str VARCHAR2(2000);
p_col_head varchar2(300);
l_selected HTMLDB_APPLICATION_GLOBAL.VC_ARR2;
p_flg CHAR(1);
p_spcl_instr char(200);
BEGIN
if :P4_CHK IS NOT NULL THEN
l_selected := HTMLDB_UTIL.STRING_TO_TABLE(:P4_CHK);
P_FLG := 'N';
FOR i IN 1..l_selected.count
loop
SELECT COLUMN_NAME, SPCL_INSTR INTO p_col_head, p_spcl_instr FROm DISPLAY_COLUMNS WHERE TRIM (COLUMN_ID) = TRIM(l_selected(i)) AND OBJECT_NAME = 'UALDBA_V';
if i = 1 then
p_str := 'SELECT ' || l_selected(i) || ' "' || p_col_head || '" ';
else
if p_spcl_instr is not null then
p_str := p_str || ', ' || p_spcl_instr || ' "' || p_col_head || '" ';
else
p_str := p_str || ', ' || l_selected(i) || ' "' || p_col_head || '" ';
end if;
end if;
P_FLG := 'Y';
end loop;
if P_FLG = 'Y' then
p_str := p_str || ' FROM UALDBA_V';
end if;
ELSE
P_FLG := 'N';
FOR CV_REC in (SELECT * FROM DISPLAY_COLUMNS WHERE DISPLAY_FLG = 'Y' AND OBJECT_NAME = 'UALDBA_V' ORDER By HIER_ID )
loop
if CV_REC.HIER_ID = 1 then
p_str := 'SELECT ' || cv_rec.COLUMN_ID || ' "' || cv_rec.COLUMN_NAME || '" ';
else
if cv_rec.spcl_instr is not null then
p_str := p_str || ', ' || cv_rec.spcl_instr || ' "' || cv_rec.COLUMN_NAME || '" ';
else
p_str := p_str || ', ' || cv_rec.COLUMN_ID || ' "' || cv_rec.COLUMN_NAME || '" ';
end if;
end if;
P_FLG := 'Y';
end loop;
if P_FLG = 'Y' then
p_str := p_str || ' FROM UALDBA_V';
end if;
END IF;
return p_str;
END;
And this does return rows but on moving to next or previuos page, I have to submit it again

Report with a form not showing all form data?

Hello,
I have an application that is using a report with a form, and when I click EDIT on the report column, it takes me to the form page which should be populated with all the data from the previous report row.
I have not modifed anthing from either page -- but (2) fields in particular (float) that I know have data is not getting populated. They are of the text field type and the row fetch is done automatically. What could be causing this? If I check the table I know there is data for those fields.
Thanks for any help,
Jeff

Thanks for the reply. I have the columns set up just as you have suggested. I even created a new report with form wizard and tried to update those two questionable columns.
If the columns are null, and I add values, they save. But then when I go back and update the record, but different columns, it nulls out the two I am talking about. I am wondering if a trigger is out there someplace that is causing them to get nulled out.
Regards,
Jeff

Substitution string used in custom Report column name does not display in PDF version of report

I am using Apex 4.2.6.00.03, Apex Listener 2 via Glassfish4 and have set up all my applications and reports on this system. We previously used Oracle 10.2, with Apache with a custom fopping document.
My issue is that I have a report that has custom column headings using a substitution string to pull in the begin or end date for the report. When the report is run and displayed, the column headings appropriately display the date. However, when I try to set up the Print to PDF option, the column headings are not displaying correctly.
Is it possible to use a substitution string in the column heading? I am able to use the substitution string in the Page Header and Page Footer and those display correctly.
In the Report Attributes setup I have set the "Strip HTML" to Yes and I have four columns that are using the &"ITEM NAME". string. See below for actual display:
The report column headings in APEX displays correctly (bold is the substitution detail):
Fund Account Description Balance 07/01/2014 Budget/Goal FY 14-15 YTD Actual 02/28/2015 Ending Balance 02/28/2015
In the Print Attributes setup, when I get to the Report Columns section, the Heading column displays the headings as set up in the Report Attributes custom and I am not able to edit these names. See below:
In the version of the report that is Printed to PDF I get the following for display:
Fund Account Description Balance %26amp;P347_BEGIN_DATE. Budget/Goal %26amp;P347_FY. YTD Actual %26amp;P347_END_DATE. Ending Balance %26amp;P347_END_DATE.
Any assistance would be greatly appreciated.
Thanks,
Pat

First, the misspelled word is a test object and not data.
Second, all data display correctly.
Third, text object is displaying the old misspelled word.
Fourth, I have eliminated the possibility that problems in of my pdf export routine cause this issue by exporting directly from Crystal Reports Viewer. I print the report to the crystal report viewer. The report looks good. The text object is spelled correctly. Then I click the Crystal Reports viewer's export button in the left upper corner and I export to both EXCEL and PDF. The excel export looks good. The pdf export is misspelled. All the export occurs internally in Crystal reports.
Fifth, I found outthat all users who have this problem have the ADOBE PDF writer installed. I am just suspicious that ADOBE writer is interferring with Crystal export
Sixth, I cannot recreate this problem on any of our development and test machines. It only happens on end-user laptops.
Seventh, I changed the name of the report that had this problem and created a new version and installed on end-user laptop. The behaviour still persists. User saved the report as both RPT and PDF. RPT export looks good. PDF version has the spelling problem. Data on both reports is up-to-date and good. I copied the same RPT export to my PC and exported it to PDF, the pdf looks good. That is why I think something on the end-users laptops is causing the export to use some cached template.
One more thing I did was to change the report name in VB.NET project, recreated a new package and installed on end-user's laptop. The same exact problem is still there.
I have worked with Crystal Reports more than 15 years and I have never such a weird behaviour before. I know this sounds very weird. We are all baffled by what is happening.

On resize of report, some data does not display in full

I have to modify a standard report, so I adjust the main section width from 11 t0 14, and the report width from 132 to 142. I compiled the report and run it. I noticed that some items does not display in full, even the text item header.
ex:
prev after modif
1234.45 123
Fname Fnam
Account Accou
At design mode, I can see that the space is enough for the item to display its full value. Anybody knows to deal with this?
this report is run thru oracle apps.

treehuggerinny wrote:
> This the the search result screen:
>
http://67.199.64.241/consumers/srchresult.asp?gender=either&searchword=&zip=&fir
> stname=&LastName=&go=Search
>
> If you choose Herrmann, there should be narratives.
>
> Any thoughts would be most appreciated!!!
I see that you're using ASP, if the fields in question are
memo fields in Access or nText fields in SQL server, then it's
possible that the following tech note may help out:
http://www.webassist.com/media/professional/support/technotes/10009.pdf
Or you may need to specify all of your columns (not SELECT *
) and manually move the memo/ntext fields to the end of the list of
fields.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

Problems with Turkish characters not displaying correctly

A user is having problems with certain Turkish characters in particular fonts not displaying correctly (as shown below).
The two fonts (Gill Sans and Helvetica LT CondensedLight) are used for English language marketing material. Ideally, for continuity, the same font would be preferred for our Turkish language marketing material rather than changing it to a similar font.
Helvetica LT CondensedLight
Turkish character “ İ ” does not display correctly in either Word or InDesign.
Gill Sans
Turkish characters “ ş ” and “ ğ ” display correctly in Word but not InDesign.
My questions are:
1. For Gill Sans, why are the characters not displaying in InDesign but are in Word?
2. I've noticed here: http://www.webtype.com/font/gill-sans-family/#glyphs-tab that the required characters are available within the Gill Sans font. Is this because the font is newer and includes the additional characters? Would this work in InDesign?

One of the big differences between InDesign and Word is that Word will happily substitute glyphs without telling you. So, unless your installs of Word and of InDesign are using different versions of Gill Sans (which is possible, BTW) then your s-with-cedilla and your g-with-macron are actually not in Gill Sans but in some other font. I'm guessing Arial.
It's possible that you have more than one Gill Sans installed (e.g. one in your Document Fonts folder and another in your system fonts folder) that have different glyph complements. Gill Sans has been around a long time, and the version I have from the 90s has no Turkish support whatsoever.
As far as the capital-I-with-dot, you can check your glyph coverage in a variety of ways. In both InDesign and Word, you can open up a window that shows you all of the glyphs in a font. In InDesign, find it in Type -> Glyphs. In Word, it's called "Insert Symbol" and you can find it in Word 2010 by going to Insert -> Symbol -> More Symbols. I am guessing that the answer to this question is simply that your cut of Helvetica LT has no cap-I-with-dot. You'd need to pick a font that actually has support for Turkish. On WIndows, I use a very full-featured freebie called BabelMap to check font coverage. They have a Web version here:
http://www.babelstone.co.uk/Unicode/babelmap.html
but I personally prefer the downloadable .exe file.

Abstract classes and methods with dollar.decimal not displaying correctly

Hi, I'm working on a homework assignment and need a little help. I have two classes, 1 abstract class, 1 extends class and 1 program file. When I run the program file, it executes properly, but the stored values are not displaying correctly. I'm trying to get them to display in the dollar format, but it's leaving off the last 0. Can someone please offer some assistance. Here's what I did.
File 1
public abstract class Customer//Using the abstract class for the customer info
private String name;//customer name
private String acctNo;//customer account number
private int branchNumber;//The bank branch number
//The constructor accepts as arguments the name, acctNo, and branchNumber
public Customer(String n, String acct, int b)
    name = n;
    acctNo = acct;
    branchNumber = b;
//toString method
public String toString()
String str;
    str = "Name: " + name + "\nAccount Number: " + acctNo + "\nBranch Number: " + branchNumber;
    return str;
//Using the abstract method for the getCurrentBalance class
public abstract double getCurrentBalance();
}file 2
public class AccountTrans extends Customer //
    private final double
    MONTHLY_DEPOSITS = 100,
    COMPANY_MATCH = 10,
    MONTHLY_INTEREST = 1;
    private double monthlyDeposit,
    coMatch,
    monthlyInt;
    //The constructor accepts as arguments the name, acctNo, and branchNumber
    public AccountTrans(String n, String acct, int b)
        super(n, acct, b);
    //The setMonthlyDeposit accepts the value for the monthly deposit amount
    public void setMonthlyDeposit(double deposit)
        monthlyDeposit = deposit;
    //The setCompanyMatch accepts the value for the monthly company match amount
    public void setCompanyMatch(double match)
        coMatch = match;
    //The setMonthlyInterest accepts the value for the monthly interest amount
    public void setMonthlyInterest(double interest)
        monthlyInt = interest;
    //toString method
    public String toString()
        String str;
        str = super.toString() +
        "\nAccount Type: Hybrid Retirement" +
        "\nDeposits: $" + monthlyDeposit +
        "\nCompany Match: $" + coMatch +
        "\nInterest: $" + monthlyInt;
        return str;
    //Using the getter method for the customer.java fields
    public double getCurrentBalance()
        double currentBalance;
        currentBalance = (monthlyDeposit + coMatch + monthlyInt) * (2);
        return currentBalance;
}File 3
    public static void main(String[] args)
//Creates the AccountTrans object
        AccountTrans acctTrans = new AccountTrans("Jane Smith", "A123ZW", 435);
        //Created to store the values for the MonthlyDeposit,
        //CompanyMatch, MonthlyInterest
        acctTrans.setMonthlyDeposit(100);
        acctTrans.setCompanyMatch(10);
        acctTrans.setMonthlyInterest(5);
        DecimalFormat dollar = new DecimalFormat("#,##0.00");
        //This will display the customer's data
        System.out.println(acctTrans);
        //This will display the current balance times 2 since the current
        //month is February.
        System.out.println("Your current balance is $"
                + dollar.format(acctTrans.getCurrentBalance()));
    }

Get a hair cut!
h1. The Ubiquitous Newbie Tips
* DON'T SHOUT!!!
* Homework dumps will be flamed mercilessly. [Feelin' lucky, punk? Well, do ya'?|http://www.youtube.com/watch?v=1-0BVT4cqGY]
* Have a quick scan through the [Forum FAQ's|http://wikis.sun.com/display/SunForums/Forums.sun.com+FAQ].
h5. Ask a good question
* Don't forget to actually ask a question. No, The subject line doesn't count.
* Don't even talk to me until you've:
    (a) [googled it|http://www.google.com.au/] and
    (b) had a squizzy at the [Java Cheat Sheet|http://mindprod.com/jgloss/jcheat.html] and
    (c) looked it up in [Sun's Java Tutorials|http://java.sun.com/docs/books/tutorial/] and
    (d) read the relevant section of the [API Docs|http://java.sun.com/javase/6/docs/api/index-files/index-1.html] and maybe even
    (e) referred to the JLS for "advanced" questions.
* [Good questions|http://www.catb.org/~esr/faqs/smart-questions.html#intro] get better Answers. It's a fact. Trust me on this one.
    - Lots of regulars on these forums simply don't read badly written questions. It's just too frustrating.
      - FFS spare us the SMS and L33t speak! Pull your pants up, and get a hair cut!
    - Often you discover your own mistake whilst forming a "Good question".
    - Often you discover that you where trying to answer "[the wrong question|http://blog.aisleten.com/2008/11/20/youre-asking-the-wrong-question/]".
    - Many of the regulars on these forums will bend over backwards to help with a "Good question",
      especially to a nuggetty problem, because they're interested in the answer.
* Improve your chances of getting laid tonight by writing an SSCCE
    - For you normal people, That's a: Short Self-Contained Compilable (Correct) Example.
    - Short is sweet: No-one wants to wade through 5000 lines to find your syntax errors!
    - Often you discover your own mistake whilst writing an SSCCE.
    - Often you solve your own problem whilst preparing the SSCCE.
    - Solving your own problem yields a sense of accomplishment, which makes you smarter ;-)
h5. Formatting Matters
* Post your code between a pair of {code} tags
    - That is: {code} ... your code goes here ... {code}
    - This makes your code easier to read by preserving whitespace and highlighting java syntax.
    - Copy&paste your source code directly from your editor. The forum editor basically sucks.
    - The forums tabwidth is 8, as per [the java coding conventions|http://java.sun.com/docs/codeconv/].
      - Indents will go jagged if your tabwidth!=8 and you've mixed tabs and spaces.
      - Indentation is essential to following program code.
      - Long lines (say > 132 chars) should be wrapped.
* Post your error messages between a pair of {code} tags:
    - That is: {code} ... errors here ... {code}
    - OR: [pre]{noformat} ... errors here ... {noformat}[/pre]
    - To make it easier for us to find, Mark the erroneous line(s) in your source-code. For example:
        System.out.println("Your momma!); // <<<< ERROR 1
    - Note that error messages are rendered basically useless if the code has been
      modified AT ALL since the error message was produced.
    - Here's [How to read a stacktrace|http://www.0xcafefeed.com/2004/06/of-thread-dumps-and-stack-traces/].
* The forum editor has a "Preview" pane. Use it.
    - If you're new around here you'll probably find the "Rich Text" view is easier to use.
    - WARNING: Swapping from "Plain Text" view to "Rich Text" scrambles the markup!
    - To see how a posted "special effect" is done, click reply then click the quote button.
If you (the newbie) have covered these bases *you deserve, and can therefore expect, GOOD answers!*
h1. The pledge!
We the New To Java regulars do hereby pledge to refrain from flaming anybody, no matter how gumbyish the question, if the OP has demonstrably tried to cover these bases. The rest are fair game.

Exits with parameters are not displaying in CO Substitution

Hi there...
I am having this problem...I´ve created a CO substitution following all the steps involved, works fine when I define the parameter:
exits-param = c_exit_param_none in form GET_EXIT_TITLES
The transaction code OKC9 displays the exit with the field:
parameters = "No change"
but when I changed the parameters in my exit for use parameters:
exits-param = c_exit_param_field
After the activating and generating with RGUGBR00, the exit doesn´t display in exits availables in OKC9 in fact all the exits with using parameters are not displaying in OKC9.
What am I doing wrong here?
Thanks in advance!!!
Alfredo
Amber

Calibrate your monitor.

Sql Query(Updateable Report) with pagination

Hi,
We're on APEX 3.2 I have a question on Sql Query(Updateable Report) and pagination. I have an updateable report which we have set to show 20 rows. When the userwhi has more than 20 rows enters the data and clicks next the data disappears. I have been reviewing other posts, but haven't come to a clear conclusion on how to prevent this from happening. I have been trying to use javascript to show a save popup when clicking 'Next' Any help is appreciated.
Thanks,
Joe

any ideas?

Empty report with pagination, rows not displayed

Similar Messages

Maybe you are looking for