Report / Log for skipped recovery files
Hello,
I am hoping someone might be able to point me in the correct direction to locate some data. A colleague of mine performed a recovery on a file directory early this morning. When selecting the option for the restore he selected "SKIP" for "Existing
Version Recovery behavior".
I am wondering if DPM logs what files it skipped during this recovery process? I have been searching through the MSDPM and DPMRA logs using a command line string similar to this. Find /I "Recovery-servername" MSDPM*.Errlog > D:\Temp\MSDPMRecovery-servername.txt.
The reports do list the restore server but no file or folder names. I have a feeling that I may be looking in the wrong place. I am also playing around with Report Builder, but am having difficulty on what table may store such information, if at all?
I am going to perform a search on the recovery server in the DPM logs there to see if I can find anything. However if anyone might have some insight on how to locate this data, if at all possible, your help would be greatly appreciated!
Thanks,
James
Hi,
On the protected server where the full restore was done, look in the C:\Program Files\Microsoft Data Protection Manager\DPM\Temp folder in the dpmra*.errlog files. Skipped files will be logged in the form of warnings.
Below is a log from DPM 2012 R2 UR4 and it shows us skipping the file called Skipme.txt
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(137) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING CFileWriterBase Debug Information Start ----------------------------------------------------
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(138) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING Failed on file \\?\G:\dbmig\SKIPME.txt (handle: 0xffffffff, IsDirAlreadyExists: false)
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(142) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING RestoreSecurity: false, RecreateReparsePoints: false, LastChangeTime (sent by sender): {0x0,0x0}, RestoreChangeTime: false, SkipStream: false
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(149) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING File properties as sent by sender (Attributes: 0x20, CreationTime: {0xf8ca1bc7,0x1ce2042}, LastAccessTime: {0xf8ca1bc7,0x1ce2042}, LastWriteTime: {0x6a931539,0x1ce203f}, FileSize: 14294 bytes, ReparseTag:0x0)
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(158) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING File properties on replica (Attributes: 0x20, CreationTime: 0x0, LastAccessTime: 0x0, LastWriteTime: 0x0, LastChangeTime: 0x0)
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(170) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING FileAccessFlagsForCreate: 0x410f0001, FileAccessFlagsOnCreateFailure: 0x410e0001, FileFlagsForCreate: 0xa000024, FileDispositionForCreate: 0x1, CaseSensitive: false, UpdateSubInfo: 0x0
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(183) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING CFileWriterBase Debug Information End ------------------------------------------------------
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(137) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING CFileWriterBase Debug Information Start ----------------------------------------------------
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(138) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING Failed on file \\?\G:\dbmig\SKIPME.txt (handle: 0xffffffff, IsDirAlreadyExists: false)
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(142) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING RestoreSecurity: false, RecreateReparsePoints: false, LastChangeTime (sent by sender): {0x0,0x0}, RestoreChangeTime: false, SkipStream: false
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(149) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING File properties as sent by sender (Attributes: 0x20, CreationTime: {0xf8ca1bc7,0x1ce2042}, LastAccessTime: {0xf8ca1bc7,0x1ce2042}, LastWriteTime: {0x6a931539,0x1ce203f}, FileSize: 14294 bytes, ReparseTag:0x0)
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(158) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING File properties on replica (Attributes: 0x20, CreationTime: 0x0, LastAccessTime: 0x0, LastWriteTime: 0x0, LastChangeTime: 0x0)
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(170) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING FileAccessFlagsForCreate: 0x410f0001, FileAccessFlagsOnCreateFailure: 0x410e0001, FileFlagsForCreate: 0xa000024, FileDispositionForCreate: 0x1, CaseSensitive: false, UpdateSubInfo: 0x0
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(183) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING CFileWriterBase Debug Information End ------------------------------------------------------
13D4 4048 01/13 23:16:25.916 18 fswrapper.cpp(932) [0000000003B155A0] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING Parameter: [0x80070050], FilePath = \\?\G:\dbmig\SKIPME.txt
13D4 4048 01/13 23:16:25.916 18 fswrapper.cpp(932) [0000000003B155A0] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING Failed: Hr: = [0x80070050] : CreateFile failed \\?\G:\dbmig\SKIPME.txt with error :80
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(217) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING Failed: Hr: = [0x80070050] : Encountered Failure: : lVal : HandleOpenFailure(dwDesiredAccess, dwFileFlags, dwDisposition, pWriterOptions->enumOverwrite, pDefaultSecurityAttributes, hr)
13D4 4048 01/13 23:16:25.916 18 filewriter.cpp(322) [0000000003B42310] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING Failed: Hr: = [0x80070050] : Encountered Failure: : lVal : OpenFileHandle(pstrFilePath, dwDesiredAccess, dwFileFlags, dwDisposition, pWriterOptions, pDefaultSecurityAttributes)
13D4 4048 01/13 23:16:25.916 18 writeriterator.cpp(2130) [0000000003B16F90] DA530647-6B3F-4D24-828D-A9DC168F8FCE WARNING Failed: Hr: = [0x80070050] : Encountered Failure: : lVal : pFileWriter->Open(pstrFilePath, pFindData, (m_writerOptions.fDeleteOldStreams == true)? FileInfo::FIT_U_STREAM_CHANGE : FileInfo::FIT_U_NONE, &m_writerOptions, m_pDefaultSecurityAttributes, pFileInfo )
13D4
In this case you could open a command prompt and run:
Find.exe /I "WARNING Failed on file" DPMRA*.ERRLOG >Skipped-files.txt
That will create a list of all skipped files during restore.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
Similar Messages
-
Hi Friends,
Please help me in finding the change logs for the TCODE FILE,
i.e The changes made to the Logical paths
I had tried Utilities---->change logs , but unfortunately i cannot find any changes logs
But there are changes made to the logical paths in my system but i cannot see them in change logs
thanks
chandrasekhar jrec/client is a profile parameter, you can view the settings in transaction RZ10. However I find program RSPARAM more useful, the report lists all system parameters with their default and altered value. Also if you double-click on a parameter you can get to the full help text for its meaning.
The parameter essentially switches on table change logging for configuration tables (based on the technical settings of the table) and has to be set before the changes are made.
Hope this helps.
Nick -
Can I copy the Recovery files to another D partition?
Hi,
My disk came with C and D partitions, but I want to arrange my disk partitions differently from factory.
I want to shrink system (C) partition a bit, create a 15Gb partition, copy the recovery files to there (to keep the recovery files isolated), and rename that partition as the new D drive.
The only thing that matters for the recovery tool to work is to place the files on a D partition?
Has anyone done similar a thing?
Will it work?Hey,
To be honest I dont think that HDD recovery will work if you copy the files on another partition.
Why you want to do this?
I use the factory default form C: and D: partition. On C: I have installed all my programs and on drive D: I have saved my private files like Picture, Music, Videos, Documents, etc.
I dont see a reason to create a separate partition for HDD recovery files because they are saved in a additional folder. -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this -
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this
<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile. -
ORA-00205: error in identifying control file, check alert log for more
I am trying to upgrade database software from 11.2.0.1 to 11.2.0.2 and followed the steps given in the Doc ID 1276368.1 in linux 86 OS environment . I am in step 9 where i need to start up the database in startup upgrade mode. I get the the following error. Please help. This out of box upgrade is quite tricky and my database is stigged version. Not able to trouble shoot further, Please help me to go forward.
sqlplus " / as sysdba "
SQL> spool /tmp/upgrade.log
SQL> startup upgrade
ORACLE instance started.
Total System Global Area 1607008256 bytes
Fixed Size 1344476 bytes
Variable Size 973081636 bytes
Database Buffers 620756992 bytes
Redo Buffers 11825152 bytes
ORA-00205: error in identifying control file, check alert log for more info
Do i shutdown and restart again? I need to run @catupgrd.sql; and other.sql to upgrade it and then apply CPU patch.
Please help...regardsFatal NI connect error 12637, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 21-NOV-2011 04:49:04
Tracing not turned on.
Tns error struct:
ns main err code: 12637
TNS-12637: Packet receive failed
ns secondary err code: 12532
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
opiodr aborting process unknown ospid (3912) as a result of ORA-609
Mon Nov 21 04:59:02 2011
Shutting down instance (immediate)
Stopping background process SMCO
Shutting down instance: further logons disabled
Mon Nov 21 04:59:04 2011
Stopping background process CJQ0
Stopping background process QMNC
Stopping background process MMNL
Stopping background process MMON
License high water mark = 26
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
Mon Nov 21 04:59:09 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Nov 21 04:59:09 2011
Shutting down archive processes
Archiving is disabled
Mon Nov 21 04:59:09 2011
ARCH shutting down
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC3: Archival stopped
ARC1: Archival stopped
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC0: Archival stopped
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC2: Archival stopped
Thread 1 closed at log sequence 1458
Successful close of redo thread 1
Mon Nov 21 04:59:51 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 04:59:52 2011
Stopping background process VKTM:
Mon Nov 21 04:59:56 2011
Instance shutdown complete
Mon Nov 21 07:48:43 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_1/dbs/spfilertborcl.ora
System parameters with non-default values:
processes = 150
resource_limit = TRUE
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u02/app/oracle/oradata/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.1.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
recyclebin = "OFF"
db_securefile = "PERMITTED"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Mon Nov 21 07:48:47 2011
PMON started with pid=2, OS id=4275
Mon Nov 21 07:48:47 2011
VKTM started with pid=3, OS id=4280
VKTM running at (100ms) precision
Mon Nov 21 07:48:47 2011
GEN0 started with pid=4, OS id=4287
Mon Nov 21 07:48:47 2011
DIAG started with pid=5, OS id=4292
Mon Nov 21 07:48:47 2011
DBRM started with pid=6, OS id=4297
Mon Nov 21 07:48:47 2011
PSP0 started with pid=7, OS id=4302
Mon Nov 21 07:48:47 2011
DIA0 started with pid=8, OS id=4307
Mon Nov 21 07:48:47 2011
MMAN started with pid=9, OS id=4312
Mon Nov 21 07:48:47 2011
DBW0 started with pid=10, OS id=4317
Mon Nov 21 07:48:47 2011
LGWR started with pid=11, OS id=4322
Mon Nov 21 07:48:48 2011
CKPT started with pid=12, OS id=4327
Mon Nov 21 07:48:48 2011
SMON started with pid=13, OS id=4332
Mon Nov 21 07:48:48 2011
RECO started with pid=14, OS id=4337
Mon Nov 21 07:48:48 2011
Mon Nov 21 04:59:51 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 04:59:52 2011
Stopping background process VKTM:
Mon Nov 21 04:59:56 2011
Instance shutdown complete
Mon Nov 21 07:48:43 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_1/dbs/spfilertborcl.ora
System parameters with non-default values:
processes = 150
resource_limit = TRUE
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u02/app/oracle/oradata/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.1.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
recyclebin = "OFF"
db_securefile = "PERMITTED"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Mon Nov 21 07:48:47 2011
PMON started with pid=2, OS id=4275
Mon Nov 21 07:48:47 2011
VKTM started with pid=3, OS id=4280
VKTM running at (100ms) precision
Mon Nov 21 07:48:47 2011
GEN0 started with pid=4, OS id=4287
Mon Nov 21 07:48:47 2011
DIAG started with pid=5, OS id=4292
Mon Nov 21 07:48:47 2011
DBRM started with pid=6, OS id=4297
Mon Nov 21 07:48:47 2011
PSP0 started with pid=7, OS id=4302
Mon Nov 21 07:48:47 2011
DIA0 started with pid=8, OS id=4307
Mon Nov 21 07:48:47 2011
MMAN started with pid=9, OS id=4312
Mon Nov 21 07:48:47 2011
DBW0 started with pid=10, OS id=4317
Mon Nov 21 07:48:47 2011
LGWR started with pid=11, OS id=4322
Mon Nov 21 07:48:48 2011
CKPT started with pid=12, OS id=4327
Mon Nov 21 07:48:48 2011
SMON started with pid=13, OS id=4332
Mon Nov 21 07:48:48 2011
RECO started with pid=14, OS id=4337
Mon Nov 21 07:48:48 2011
MMON started with pid=15, OS id=4342
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon C:\Users\MVEMURI 07:48:48 2011
MMNL started with pid=16, OS id=4347
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Nov 21 07:48:49 2011
ALTER DATABASE MOUNT
Successful mount of redo thread 1, with mount id 2616737889
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Mon Nov 21 07:48:54 2011
ALTER DATABASE OPEN
LGWR: STARTING ARCH PROCESSES
Mon Nov 21 07:48:54 2011
ARC0 started with pid=20, OS id=4398
ARC0: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Mon Nov 21 07:48:55 2011
ARC1 started with pid=21, OS id=4403
Mon Nov 21 07:48:55 2011
ARC2 started with pid=22, OS id=4408
ARC1: Archival started
ARC2: Archival started
ARC2: Becoming the 'no FAL' ARCH
ARC2: Becoming the 'no SRL' ARCH
Mon Nov 21 07:48:55 2011
ARC3 started with pid=23, OS id=4413
ARC1: Becoming the heartbeat ARCH
Thread 1 opened at log sequence 1458
Current log# 3 seq# 1458 mem# 0: /u01/app/oracle/oradata/rtborcl/redo03.log
Current log# 3 seq# 1458 mem# 1: /u02/app/oracle/oradata/redo03b.log
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
SMON: enabling cache recovery
ARC3: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:977954 end:979234 diff:1280
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
Mon Nov 21 07:48:58 2011
SMON: enabling tx recovery
Database Characterset is WE8MSWIN1252
No Resource Manager plan active
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Mon Nov 21 07:49:03 2011
QMNC started with pid=24, OS id=4418
Mon Nov 21 07:49:10 2011
db_recovery_file_dest_size of 4977 MB is 13.68% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Nov 21 07:49:12 2011
Completed: ALTER DATABASE OPEN
Mon Nov 21 07:49:12 2011
Starting background process CJQ0
Mon Nov 21 07:49:12 2011
CJQ0 started with pid=25, OS id=4470
Mon Nov 21 07:54:05 2011
Starting background process SMCO
Mon Nov 21 07:54:05 2011
SMCO started with pid=26, OS id=4515
Mon Nov 21 10:08:01 2011
ALTER SYSTEM ARCHIVE LOG
Mon Nov 21 10:08:01 2011
Thread 1 advanced to log sequence 1459 (LGWR switch)
Current log# 1 seq# 1459 mem# 0: /u01/app/oracle/oradata/rtborcl/redo01.log
Current log# 1 seq# 1459 mem# 1: /u02/app/oracle/oradata/redo01b.log
Mon Nov 21 10:08:04 2011
Archived Log entry 1421 added for thread 1 sequence 1458 ID 0x990b1f4c dest 1:
Mon Nov 21 10:12:53 2011
ALTER SYSTEM ARCHIVE LOG
Mon Nov 21 10:12:53 2011
Thread 1 advanced to log sequence 1460 (LGWR switch)
Current log# 2 seq# 1460 mem# 0: /u01/app/oracle/oradata/rtborcl/redo02.log
Current log# 2 seq# 1460 mem# 1: /u02/app/oracle/oradata/redo02b.log
Mon Nov 21 10:12:53 2011
Archived Log entry 1422 added for thread 1 sequence 1459 ID 0x990b1f4c dest 1:
Mon Nov 21 10:14:44 2011
Shutting down instance (immediate)
Stopping background process SMCO
Shutting down instance: further logons disabled
Mon Nov 21 10:14:45 2011
Stopping background process CJQ0
Stopping background process QMNC
Stopping background process MMNL
Stopping background process MMON
License high water mark = 4
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
Mon Nov 21 10:14:49 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Nov 21 10:14:54 2011
Shutting down archive processes
Archiving is disabled
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC3: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC0: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC2: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC1: Archival stopped
Thread 1 closed at log sequence 1460
Successful close of redo thread 1
Mon Nov 21 10:15:01 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 10:15:02 2011
Stopping background process VKTM:
Mon Nov 21 10:15:08 2011
Instance shutdown complete
Mon Nov 21 11:52:11 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side pfile /u01/app/oracle/product/11.2.0/db_2/dbs/initrtborcl.ora
System parameters with non-default values:
processes = 150
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u01/app/oracle/flash_recovery_area/rtborcl/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Create Relation DFW_CONFIG_CAPTURE
Create Relation DFW_CONFIG_ITEM
Mon Nov 21 11:52:17 2011
PMON started with pid=2, OS id=7339
Mon Nov 21 11:52:17 2011
PSP0 started with pid=3, OS id=7344
Mon Nov 21 11:52:18 2011
VKTM started with pid=4, OS id=7349
VKTM running at (100ms) precision
Mon Nov 21 11:52:18 2011
GEN0 started with pid=5, OS id=7356
Mon Nov 21 11:52:19 2011
DIAG started with pid=6, OS id=7361
Mon Nov 21 11:52:19 2011
DBRM started with pid=7, OS id=7366
Mon Nov 21 11:52:19 2011
DIA0 started with pid=8, OS id=7371
Mon Nov 21 11:52:19 2011
MMAN started with pid=9, OS id=7376
Mon Nov 21 11:52:19 2011
DBW0 started with pid=10, OS id=7381
Mon Nov 21 11:52:19 2011
LGWR started with pid=11, OS id=7386
Mon Nov 21 11:52:19 2011
CKPT started with pid=12, OS id=7391
Mon Nov 21 11:52:19 2011
SMON started with pid=13, OS id=7396
Mon Nov 21 11:52:19 2011
RECO started with pid=14, OS id=7401
Mon Nov 21 11:52:19 2011
MMON started with pid=15, OS id=7406
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Nov 21 11:52:19 2011
MMNL started with pid=16, OS id=7411
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Nov 21 11:52:20 2011
ALTER DATABASE MOUNT
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/u01/app/oracle/flash_recovery_area/rtborcl/control02.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-205 signalled during: ALTER DATABASE MOUNT...
Mon Nov 21 11:52:21 2011
Checker run found 1 new persistent data failures -
Report LOG File..
i want to create a report log file...
that at what date/time user run this report.
how to do this..?
Any ideaYou can use the report server queue table, look here for details. You could also create a custom solution of creating a log table and add an "After Report" trigger to log details into you log table. If you are looking to troubleshoot or trace the report, look here
-
Limit execeed for Recovery files.
After starting my DB ,Getting this Erro........
Database mounted.
ORA-16038: log 1 sequence# 227 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 1 thread 1:
'D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\REDO01.LOG'
How can Resolve this problem.16038, 00000, "log %s sequence# %s cannot be archived"
// *Cause: An attempt was made to archive the named file, but the
// file could not be archived. Examine the secondary error
// messages to determine the cause of the error.
// *Action: No action is required.
bcm@bcm-laptop:~$ oerr ora 19809
19809, 00000, "limit exceeded for recovery files"
//*Cause: The limit for recovery files specified by the
// DB_RECOVERY_FILE_DEST_SIZE was exceeded.
// *Action: There are five possible solutions:
// 1) Take frequent backup of recovery area using RMAN.
// 2) Consider changing RMAN retention policy.
// 3) Consider changing RMAN archived log deletion policy.
// 4) Add disk space and increase DB_RECOVERY_FILE_DEST_SIZE.
// 5) Delete files from recovery area using RMAN. -
Please HELP with ORA-19809: limit exceeded for recovery files
Hi Gurus,
I am not a DBA but a developer. Today my Oracle database 11g on my PC will not open and I am getting the errors,
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
I checked my alert logs and found these errors,
Errors in file c:\oracle\diag\rdbms\orcl\orcl\trace\orcl_ora_2144.trc:
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 41072128 bytes disk space from 4039114752 limit
ARCH: Error 19809 Creating archive log file to 'C:\ORACLE\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_04_08\O1_MF_1_120_%U_.ARC'
Errors in file c:\oracle\diag\rdbms\orcl\orcl\trace\orcl_ora_2144.trc:
ORA-16038: log 3 sequence# 120 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 3 thread 1: 'C:\ORACLE\ORADATA\ORCL\REDO03.LOG'
USER (ospid: 2144): terminating the instance due to error 16038
Instance terminated by USER, pid = 2144
So I started searching for answers on this forum and found a suggestion using RMAN to delete all the archive logs,
RMAN> connect target sys/*******
RMAN> delete archivelog all;
RMAN>crosscheck archivelog all;
But I get these errors in RMAN,
using target database control file instead of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 04/08/2011 11:20:58
RMAN-06403: could not obtain a fully authorized session
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
So, please help me: How do I fix this problem since I can't start the instance?
Thank you.
BenYou need to increase the FRA by changing the parameter DB_RECOVERY_FILE_DEST_SIZE. Create a parameter file while being connected as Sys user and issue,
sql>create pfile from spfile;It would create the pfile in the Oracle_Home/database folder. Edit that file and increase the parameter to a larger size-like double of it's current value. Save the file and issue,
sql>startup pfile=<your location of the file>HTH
Aman.... -
Announcing new activity logging and reporting capabilities for Office 365
Announcing new activity logging and reporting capabilities for Office 365We are pleased to announce the rollout of new activity logging and reporting capabilities for Office 365, including the Office 365 activity report, comprehensive logging capability, PowerShell command or cmdlet and a preview of the Office 365 Management Activity API.Thisnew capability provides you increased transparency, allowing you to monitor and investigate actions taken on your data, and comply with laws and regulations.Office 365 activity reportThe Office 365 activity report enables you to investigate a user’s activity by searching for a user, file or other resource across SharePoint Online, One Drive for Business, Exchange Online and Azure Active Directory, and then download the activities to a CSV (comma separate values) file. You can filter by date range,...
This topic first appeared in the Spiceworks CommunityHi,
Do you have any specific questions? We'll certainly try to help you, but we won't do your homework for you. That wouldn't help you learn at all.
I recommend looking over the learning materials here, they're quite good for getting started with PowerShell:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
Hi,
Everytime I run a report from Oracle forms, it creates a "Reports.log" file in the working directory.
Is there anyway to suppress the creation of that file or to have it created in a specific directory.
Thanks.Hi,
this is a good question for the Reports forum here on OTN. Let me know what their response is.
thanks
Frank -
ORA-19809: limit exceeded for recovery files and flash_recovery_area
Hi.
I am getting the below errors (at the end) when trying to backup the database using RMAN.
The directory structure is
E:\oracle\TEST
E:\oracle\TEST\flash_recovery_area
E:\oracle\TEST\flash_recovery_area\arch --> HAS ARCHIVE FILES
E:\oracle\TEST\flash_recovery_area\TEST
E:\oracle\ATEST\flash_recovery_area\TEST\BACKUPSET --> RMAN backup sets
E:\oracle\TEST\flash_recovery_area\TEST\ONLINELOG --> This is empty.
D:\oracle\product\10.2.0\ is oracle home
It has:
D:\oracle\product\10.2.0\admin
D:\oracle\product\10.2.0\db1
D:\oracle\product\10.2.0\oradata
D:\oracle\product\10.2.0\oradata\test has data files.
1) I created this database using OUI and DBCA and I have a feeling that this structure is somewhat convoluted. Could you let me know if this needs to be changed?
2) Secondly, the RMAN error. The entire size of E:\oracle\TEST\flash_recovery_area is now only 1.74 GB yet I am getting this error.
I deleted old archive logs from E:\oracle\TEST\flash_recovery_area\arch . Currently it has only arch logs for seven days. Next I issued delete expired archivelog all command. Right now crosscheck archivelog all finds only 40 archive logs..
and increased db_recovery_file_dest_size to 10GB. alter system set db_recovery_file_dest_size=10000M scope=both;
select name
, floor(space_limit / 1024 / 1024) "Size MB"
, ceil(space_used / 1024 / 1024) "Used MB"
from v$recovery_file_dest
order by name
This query is returning the use space as 6GB. However physically only 1.74 GB is currenly used. Please let me know the way forward. Appreciate in advance.
channel ORA_DISK_1: starting piece 1 at 09-JUN-09
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/09/2009 17:56:
15
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 10485760000 limit
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current control file in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 09-JUN-09
channel ORA_DISK_1: finished piece 1 at 09-JUN-09
piece handle=E:\ORACLE\TEST\FLASH_RECOVERY_AREA\TEST\BACKUPSET\2009_06_09\
O1_MF_NCSNF_TAG20090609T175224_52XPN0Y9_.BKP tag=TAG20090609T175224 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/09/2009 17:56:
15
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 10485760000 limit
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/09/2009 17:54:
19
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 10485760000 limit
RMAN>Hi,
Thanks for looking into my problem... Here are the answers..
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination E:\oracle\TEST\flash_recovery_area\arch
Oldest online log sequence 1011
Next log sequence to archive 1013
Current log sequence 1013
SQL>
select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0.00 0.00 0
ONLINELOG 0.00 0.00 0
ARCHIVELOG 0.00 0.00 0
BACKUPPIECE 66.57 0.20 5
IMAGECOPY 0.00 0.00 0
FLASHBACKLOG 0.00 0.00 0
SQL> show parameter log_archive_dest
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string LOCATION=E:\oracle\TEST\flash_recovery_area\arch
log_archive_dest_10 string
log_archive_dest_2 string
log_archive_dest_3 string
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
NAME TYPE VALUE
log_archive_dest_9 string
log_archive_dest_state_1 string enable
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string enable
log_archive_dest_state_3 string enable
log_archive_dest_state_4 string enable
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
SQL> -
Rep Log for reports....
Hi Experts,
Could you anybody tell me that <b>how to create a log for reports</b> and how to see the log file.... Very urgent please....
Thanx in Adv,
Regards,
<b>Suresh V</b>hi!
i'm also finding the same message "unable to find out the report
building message".
can u please help me out.
thanks
ardhend -
XML publisher report not generating output for huge XML files
Changed Depreciation Projections Report output type to XML.
Defined a Data Definition and a new Data Template (RTF) for this report.
Ran the Depreciation Projection Report to generate the XML output.
Ran the XML Report Publisher report to generate teh PDF/Excel output of the above report.
Output generated for smaller XML files. When XML size is big, the program is running for hours without generating the output.
Teh RTF template is basically a matrix report in which the number of columns in the report is based on the number of periods the report is run for.
The same is not working in the Desktop version also. The system is hanging when i try to view the preview pdf.
The XML file size is approximately 33 MB.
Please let me know if there is any way we can increase the memory size to see the output.
Thanks,
Ram.for publisher use Category: E-Business Suite
Maybe you are looking for
-
Ipad Keyboard (one with docking station attached to keyboard)
I had just recently purchased the Ipad keyboard, the one with the docking station attached to the keyboard. The problem is I use it in my car a lot and find it difficult to use. Is there anything 3rd party that will allow me to connect a cable to the
-
Best settings for t1i 720 clips in Final cut
Hello Everyone, I am sorry to bug you with this question but will so appreciate it if someone can shed some light on my neck of the woods. I am shooting a small project using Canon's T1i. Beautiful HD videos but after I followed a colleague's advice
-
Images distorting when saving as pdf
Hi I am having a problem when exportng a file as a pdf. A jpg image that I am using distorts. This is a high res file and I have tried exporting with both the 'high quality print' and 'press quality' presets. I have tried printing directly from illus
-
Issue 1- Indesign CS5 freezes when I try to place a file / photo linked to the Dropbox. Issue 2 - Illustrator quits when I try to save files to the Dropbox. Some have links and some don't but it's the same problem. I am using OS 10.10.2 Can anyone ex
-
Hello Friends , Could any one please let me know , what is the special code should be written for infoset Program . There is some special syntax for infoset program . I means the data source which is based on Infoset and program. Regards