Report multiple failures with TestStand reporting

I'm pretty new to TestStand so please bear with me. I'm using LabView to test a connector on a digital interface board. So I'm reading and writing dig. signals on say 15 pins in a test. I'm using TestStand to run my VI's. When a test fails TestStand seems to only report one measurement at a time. I want all of the pins that failed to show up in the TestStand report in a format like :
InputPin:A1 OutputPin:B1 Expected:0 Read:1
InputPin:a2 outpuPIn:b1 expected:1 read:0
I tried using the ReportText section of the TestData Cluster but I couldn't format it properly. All of the data sort of runs into each other like this
input:a1 output:b1 expect:0 read:1 input:a2 output:b2
the carriage returns I tried to put in were i
gnored.
Does anybody know how I can report a lot of failures in one report. I hope I explained properly.Thanks

Hi,
Find attached an example using the MultipleNumericLimitTest step type.
All it does is use the array found in Locals call Digital as the DataSource for the Limits. You can check this by selecting the step and doing a right mouse click - select Edit Limits. Then select the Data source Tab. I have add 16 Measurements, one for each of the array elements.
This will give a you a result of each element of the array in the report for that step. But by default it will look like:
Measurement[0] (Measurement 0):
Limits:
Low: 0b1
Comparison Type: EQ (==)
Data: 0b0
Status: Failed
To get the format you require will mean modifying the report sequence file.
Hope this helps a bit
Regards
Ray
Farmer
Regards
Ray Farmer
Attachments:
Sequence_File1.seq ‏26 KB

Similar Messages

Multiple Failures with Auto Export Private Preview for one DB

My Customer has received 7 failures so far this month for their daily exports for a specific Database. While they understand this service is in private preview,
this failure rate is abnormally high from their experience with this service and the Customer is asking for Microsoft to investigate. They are not experiencing this same failure rate on any of their other production DB exports. The
error logs show the following:
Start Time: Saturday, July 05, 2014 2:08:01 AM
End Time: Saturday, July 05, 2014 2:29:50 AM
Subscription ID: <SUB ID>
Server Name: <SERVER NAME>
Database Name: <DATABASE NAME>
Operation Name: Export
Operation ID: e8f916a6-838d-457c-be3c-83257b7c039b
Status: Failed
Details: Error encountered during the service operation.
Could not connect to database server.
Cannot open database "<DATABASE NAME>" requested by the login. The login failed.
Login failed for user '<DB ADMIN USER>'.
This session has been assigned a tracing ID of 'ebc9b95b-e777-49b1-82d8-064549c6fe95'. Provide this tracing ID to customer support when you need assistance.
Can we please have an Engineer supporting the Auto Export Private Preview review this matter and the error logs further to help us understand if the multiple failures are considered
normal or high?
Thank you,
Frank Ellero
Frank Ellero - Microsoft Corporation

Hi,
The error you have mentioned points to the connectivity issues to the database.Please have a check on the below link for more information:
http://social.technet.microsoft.com/wiki/contents/articles/1719.windows-azure-sql-database-connectivity-troubleshooting-guide.aspx
http://support.microsoft.com/kb/2980233/en-us
If the issue persists, I would recommend that you have a
Technical Support Ticket opened as it would require dedicated troubleshooting.
Regards,
Mekh.

REPORT GETS HUNG WITH THE REPORT QUEUE SHOWING THE STATUS OF OPENING

I have installed Oracle 9ids on windows 2000 platform. This installation is part of the oracle clinical installation process.
The installation went on fine except few problems during generating reports. I am able to generate report but as soon as any one of the report fails it stops all the subsequent reports . The failing report has the status of "Opening" in the report queue manager whereas all the subsequent reports get stuck with the status of "Firing before trigger" status in the report queue manager.
Has anybody encountered the same problem or anything similar... if so, pls hlp...
Regards,
Venus

I tried this Gill, but result is bit different :-
Seems some little modifications are needed. Report should be displayed like the below one where it says how many times the same Task is associated with the same incident. Eg. Task 'TASK_CIRCUIT_RESOLVER' is associated with the incident 'INC000000001434' 4 times. 'IPCG Diagnostic Template' is associated with 'INC000000000943' 2 times. Similarly for other records.
But I really thankful to you for giving me the logic proceed further. I tried '=RunningCount([Task Name]; Row; ([Task Name]; [Incident ID]))'. It gave me desired results. :-
But the only thing that needs to be done is to bring the single Task associated with the Incident..
Thanks,
Neha Pateria

Reporting cell comments with Financial Reporting

Hi all,
Is there anyway to report comments attached to cells in "Planning data forms" with Financial reporting? Which function should I be using to do that?
I am using the 11.1.2.2 version.
Thanks.

I believe the functionality is <<CellText("GridName", Row, Column, Page)>> whcih retrieves planning cell comments.
The full FR studio guide is here: http://docs.oracle.com/cd/E17236_01/epm.1112/fr_user_epm/frameset.htm?launch.html search for celltext and it will give you more detail.
Edited by: Agnete on Aug 28, 2012 9:44 AM

Executing multiple scripts with error reporting where necessary.

Hi,
I'm a developer using SQL developer to create scripts for Tables / Views / Procs. I'm relatively new to Oracle, as I've been using SQL server mostly. So please bear with me.
Now, the dev team constantly upset the dba due to subtle syntax issues between SQL Developer and SQL+. So, what we are now meant to do is test our scripts via SQL+ on the understanding that if it works with that it's good.
However, you DBAs know that developers don't always do what they are told :).
Hence, I have been tasked each morning to run all the scripts to make sure they are ok.
I know I can execute multiple scrips easily like this....
@c:\Scripts\Table1
@c:\Scripts\Table2
@c:\Scripts\Proc1
@c:\Scripts\Proc2
etc
However, this seems to echo all the contents of the scripts in the output window. So it's a bit of a task to trawl through the output to see if there are any errors.
What I would really like to do is as above, but rather than echoing the script contents, just provide output to say that each object (tables / views / procs) has been created correctly, or if an error occurred, output the relevant object name and the error.
eg - If Table2 DDL has errors, output along the lines of....
Table1 created successfully.
Error creating Table2: <Invalid data type>
Proc1 created successfully.
Error creating Proc2:<Object Table2 does not exist>
Is this possible?
Example pretty please.
Ultimately, I'd like to email the output automatically - however, that's a task for another day :).
Many thanks
DC

I'm not sure what you mean by "echo all the contents of the scripts in the output window". If I create a script a.sql
drop table a;
create table a ( col1 number );
drop table b;
create table b ( col1 number );
drop table c;
-- Note the error in the definition of c
create table c ( 123 number ); and run it in a vanilla SQL*Plus session, I get the output you appear to be looking for
SQL> @c:\temp\a.sql
Table dropped.
Table created.
Table dropped.
Table created.
drop table c
ERROR at line 1:
ORA-00942: table or view does not exist
create table c ( 123 number )
ERROR at line 1:
ORA-00904: : invalid identifierAre you looking for something different? Or are you getting different results?
Justin

Report Description Truncation with Crystal Report

During the process of moving Crystal Reports to a BOXI Rel 2 using the CMC we noticed that the report description was truncated.
Is there a character limitation in the repository that is different then the character limitation within Crystal?
Best Regards
John

Hello,
The classic ASP COM component has been retired. The last version to ship with the RDC COM component was Crystal Reports XI Release 2 (v11.5). Since the RDC COM component has been retired Crystal Reports 2008 isn't expected to work with classic ASP.
The suggested migration path is to move to the Crystal Reports .NET SDK. You can find additional information about the CR .NET SDK in the sticky posts at the top of this NET - SAP Crystal Reports forum.
Sincerely,
Dan Kelleher

Multiple Failures with Auto Expert private preview for one DB

My Customer has received 7 failures so far this month for their daily exports of a specific Database. While they understand this service is in private preview,
this failure rate is abnormally high from their experience with this service and the Customer is asking for Microsoft to investigate. They are not experiencing this same failure rate on any of their other production DB exports.
Please advise.
Thank you,
Frank Ellero
Frank Ellero - Microsoft Corporation

Hello,
Did you review the import and export history?
You can see the status and history of a scheduled export operation on the History tab of the SQL Database server. It may provider more information about the failed export operation.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Report by email with whole report as body and attached file

Hello,
I try to send my Reports by mail and have to attach a file to the report.
But this filename is't a static one. Is there a work-around to attach a dynamic file to my e-mail.
Here is a part of my destination.xml file:
<foreach>
<mail id="DEST1" to="&<address>" subject="&<subject>">
<body srcType="report" format="html">
<include src="mainSection"/>
</body>
<attach srcType="file">
<include src="/coup_cache/&<filename>"/>
</attach>
</mail>
</foreach>

Is it possible to create my own xml tag to solve this problem?
something like <myAttach file="xyz"/>
and something build up the necessary tag.
<attach srcType="file">
<include src="xyz"/>
</attach>
I don't know much about xml. I read something about xsl to do that?
Any ideas?
looking forward to read your hints
Avis

Generate multiple Oracle Applications pdf reports in one batch

hi,
we are working in oracle applications 11i.
we have a custom salary slip report that is built with Oracle Reports Builder and run as a PDF report in Oracle HRMS.
I need to find a solution to generate the reports/pdf files of all employees in one run/click, name each output file according to employee number and month in the report, save them all in a folder.
How can I do this from either, reports builder, or Oracle applications?
Regrads,

Hi,
I need to find a solution to generate the reports/pdf files of all employees in one run/clickYou can write a PL/SQL program which will dynamically submit the concurrent request for the report multiple times with different parameters. You will need to run the calling PL/SQL program only once.
name each output file according to employee number and month in the reportThe output files generated are named according to Oracle EBS convention(like o<req_id>.out). I do not know of any way by which the output file names can be changed. You can however generate the report title dynamically, depending on the input parameter.
save them all in a folderOutput files are generally stored in $APPLCSF/$APPLOUT. This location can be changed but it will affect all concurrent programs and not just your report.
Regards,
Sujoy

Using Multiple Functions with in members selection of Hyperion Financial St

Hello everyone, I am trying to retrieve all the level 0 entity members from a specific Level 3 entity member. Can I use multiple Functions with in Report studio to do this?? Or is creating an alt hierarcy my only option?
Thanks

You can try doing System Defined member list Lev 0 AND Descendants of Lv 3 member
JTS

Unable to report on transports using TMWFLOW/REPORTING

Good Day All;
I am having a problem reporting on transports with ChaRM reporting. I am using T_Code /TMWFLOW/REPORTING.
On screen I am making the following selections
Transport Requests
Changed On Dec. 1, 200 to Dec.27, 2008
Transport Stat
Select All
I have also selected by Request Category, Request Owner, Request Target and Changed on. I have not been able to list any transport.
The one interesting thing, at the bottom of the screen there is a section labeled u201CDiffering Systemsu201D. The systems listed here are not the systems that the Change Management System is connected to. If I click on the Refresh button, Nothing changes
regards
Don Newton

Just Cleaning up

How to run the same SSRS report multiple times, each time with a different parameter value?

Hi,
I have an SSRS report that produces a list of invoices for a single supplier (so supplier is a parameter specified at runtime). The report is based on a stored procedure in SQL. I would like to make things easier and instead of going through all suppliers
one by one, I want to have a single action, which produces separate reports, per supplier, for all suppliers that have an outstanding invoice (so not all suppliers on the system as a whole but all suppliers that are within the result set of the stored procedure).
I assume this would mean first executing the stored procedure to find all suppliers that have invoices at the time. And then running the report multiple times, once for each supplier, where the supplier value is used as the parameter every time. ideally
this would open separate webpages with a single report per page. (I am creating a button in another software, which is simply launching iexplore.exe and passing a
fixed SSRS report URL).
What would be required? I have SQL 2012 and I am building this in Report Builder 3.0.
Thank you!
Dimitar
P.S. What about still running ONE report, but every supplier starting on a new page? Is that more realistic? So supplier will not be a parameter any more, but just something that creates a new page on the report?

What
about still running ONE report, but every supplier starting on a new page? Is that more realistic? So supplier will not be a parameter any more, but just something that creates a new page on the report?
Yes thats a much better option. Its very easy to generate such a report in SSRS. You dont need a parameter
in that case but just needs to add Supplier as a grouping field in the tablix. Then add other columns and groups if required. Select option set page break after each instance of the group for first grouping (ie based on supplier field). Then report will render
with one page per supplier. On exporting to excel also each supplier data goes to a different tab
Here's a similar requirement I did for one of my projects
http://visakhm.blogspot.in/2013/10/using-ssrs-to-export-sqlserver-data-to.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to generate one report in multiple formats with FOP or BIP?

Hi all,
Is it possible to generate multiple formats of one report in a single "call" using Apache FOP or BI Publisher? (something similar to reports bursting).
Right now I can only select one format at a time.
Thank you,
Ana-Maria

Hi Ana-Maria,
When you enable printing on a report region or add a button to download a report query to your application, then you get a single document download. How would you see this working with "multiple formats"? Given that APEX is a development environment, you can pretty much implement anything you like. The built-in printing capabilities in APEX come with an API that allow for customization of the default functionality, e.g. you can use apex_util.download_print_document to dynamically assign report layouts at rumtime or to use you own XML data sources or XSL-FO style sheets. More relevant to you question though, there's also apex_util.get_print_document. What that allows you to do is to generate report documents inside the database and e.g. store them in database tables or email them out to a list of recipients. You can call this API as often as you like to, requesting any combination of available report formats.
The API function is documented here:
http://download.oracle.com/docs/cd/E10513_01/doc/apirefs.310/e12855/apex_util.htm#CHDDECIA
Regards,
Marc

How to generate a report in Excel with multiple sheets using oracle10g

Hi,
I need a small help...
we are using Oracle 10g...
How to generate a report in Excel with multiple sheets.
Thanks in advance.
Regards,
Ram

Thanks Denis.
I am using Oraclereports 10g version, i know desformat=spreadsheet will create single worksheet with out pagination, but my requirment is like the output should be generated in .xls file, and each worksheet will have both data and graphs.
rdf paperlayout format will not workout for generating multiple worksheets.
Is it possible to create multiple worksheets by using .jsp weblayout(web source) in oracle reports10g. If possible please provide me some examples
Regards,
Ram

I have repeatedly tried to install flashplayer on Mac 10.5.8 with no success. I have followed the online help document line by line and tried Mike M's suggestions to no avail. I now have no flashplayer and each time it continues to report a failure to lau

I have repeatedly tried to install flashplayer on Mac 10.5.8 with no success. I have followed the online help document line by line and tried Mike M's suggestions to no avail. I now have no flashplayer and each time it continues to report a failure to launch even when reset. the error report on apple state a breakpoint and unknow required load command whatever that is....HELP!

Hi Katie,
Flash Player is no longer supported on OS X 10.5.8. If you try to install one of the latest versions, it'll just terminate. You need Flash Player 10.3.183.90 (released 7/9/2013), which is the last version supported on OS X 10.5.8. The installer file is in this zip package, http://fpdownload.macromedia.com/pub/flashplayer/installers/archive/fp_10.3.183.90_archive _mac_only.zip.
If you have an Intel machine, you may want to consider upgrading to 10.9 (free upgrade) so that you can install the latest, most secure, version of Flash Player.
Maria

Report multiple failures with TestStand reporting

Similar Messages

Maybe you are looking for