Report needed: Absences x Quotas

Dear all,
     I need a report to show from wich quota was an absence used.
    Example:
ABSENCE HOURS   QUOTA   DATE..
XX       nn      YY
XX       mm      YY
    I know how to see it by using tables (PTQUODED) but I need a report for users, and before coding a new one I would like to see if there is one standar available.
Any help will be appreciated and rewarded,
Thanks a lot in advance!
Fede

Yes dude, but those reports dont show me for a given absence from which quota it was deducted.
I have some absences that can deduct from more than 1 quota (depending on the amount of the quotas)... so I need a report that shows me in which quota absences took the hours.

Similar Messages

Report needed to conbine stock movement and corresponding balance

Hi Friends,
End user need a report to show stock movement trasaction and it's coresponding stock balance.
In MB51, we can see all the stock movements against one material, is there any way a report could show stocks' corresponding iventory balance under diffierent invenotory category (unrestriced,QC, Return and block) for each movement trasaction ?
Report needed like below
SLoc , MoveType , Material document, posting date, qty, unrestic bal, QC balance, return Balance, Blked Bal.
Thanks,
L

Hi,
Kindly take the help of abaper and create a customized report or also you can have query created in SQ01.
Hope this will help you !!!
Regards,
Krishna O

Understanding report need backup recovery window ..

Hello,
I have a big database which backed up within several days at night time. The retention policy is "recovery window of 3 days". I've tried to analyze the results of
report need backup;But I noticed than this command return just the list of datafiles having latest backup older than 3 days. I've tried to read again the docs:
>
Reports data files for which there are not sufficient backups to satisfy a recovery window-based retention policy for the specified number of days, that is, data files without sufficient backups for point-in-time recovery to any point back to the time SYSDATE - integer.
>
Please correct me if I'm wrong, but I consider that the ability to make recover to any point in time within 3 days require the backup taken earlier than 3 days ago and archivelogs from the time when backup was taken to the recover PIT. Im I right? If so then how I should interprete the results of report need backup ? I can't find the detailed explanations of this in the docs :(
Thanks in advance,
Constantine

You are correct in your appreciations.
This report is about the need of backups, without considering archivelog backups.
It does not mean that listed files are in an unrecoverable situation.
Regards.

Report needed for storage costs in WM

Hi All,
I need a report for the storage costs for utilising the warehouse by plants. Cost of space utilised per m3 will be provided in selection screen. For each material the volume should taken from material master. Warehouse will be utilised by three plants and report needed to calculate the space occupied by the materials in warehouse per plant per month. I am not able to find the logic to calculate average space utilised(as day to day there will putaways,transfer postings and picking).All stocks to be taken into consideration.Let me know how to proceed.
Regards,
Manik

Dear Experts,
Cud u plz throw some light on this...
Regards,
Manik

Stand alone oracle report - need help asap

Hi,
We are in ORACLE Apps 11i. We started using ORACLE BI Publisher to create templates for the Oracle Reports. How we are doing reports now is
1) create data definition XML which has all the queries embedded.
2) Create Data definition in XML Publisher Admin responsibility.
3. Attach the Data definition XML to that.
4. Create a concurrent program definition for the report with XML Type and run the report and save the data file with tags.
5. Create the template ,rtf in Word and export data using ORACLE BI Publisher. 6. Create template definition in the XML Publisher Admin responsibility and attach this .rtf to that and run the report.
Now I have a requirement stating that the REPORT SHOULD BE AN ORACLE STAND ALONE REPORT AND THE REPORT NEEDS TO BE RUN THROUGH CONCURRENT PROGRAM SCREEN. I am planning on doing the following steps.
1. I have to create an .rdf using report builder.
2. Create concurrent program executable and definition for the report.
3. Create data definition in XML Publisher admin responsibility.
4. Run the report in apps.
5. Create the tempalte .rtf in word and export data with the XML Data file with tags,
6. Run the report.
Am I correct? Any help is appreciated asap.
Thanks
Akil

You said,
standalone report ?? is that mean without using bipublisher ??
1st method.
create concurrent program, output xml,
create data template, create datadefintion , attach Datatemplate.
run the cc pgm, get xml, design RTF , create template definition , attach RTF,
run the cc pgm, you get the pdf output.
2nd method.
create rdf,
create concurrent program, output xml,
run the cc pgm, get xml, design RTF ,
create datadefintion , create template definition , attach RTF,
run the cc pgm, you get the pdf output.
, both requires, cc pgm, rtf, data defintion , template definition.
only differnece is , how do you get the data, i mean, xml...
data template or RDF.

RMAN report need backup

We have an incremental level-1 backup Mon-Sat and cold full backup on Sundays with retention policy of 7 days. While troubleshooting some backup issues (space issue, expired backups) I ran the following commands and trying to understand the output.
RMAN> report need backup database;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
100 146 /orahprdidx/hprd/psindex05.dbf
RMAN> report unrecoverable;
Report of files that need backup due to unrecoverable operations
File Type of Backup Required Name
RMAN> report need backup days = 7 database;
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
100 146 /orahprdidx/hprd/psindex05.dbf
RMAN> report obsolete recovery window of 7 days;
no obsolete backups found
RMAN>
I looks like I need 146 days worth of archive log files to recover the psindex05.dbf. If so, what I could do to bring that into the 7 days policy?
The database is fine, I am not trying to recover the database.
This was setup by someone and now I am taking over with minimum RMAN experience.
I appreciate any help in this subject.

The datafile was offline. I guess it was created my mistake and hanging in there. Once I do the cleanup it should go away.

Hi! I am newbie to Reports need help with check boxes

Hi! I am newbie to Reports need help with check boxes. I am try-in to make a new check boxes that will validate in runtime. I have created two frames and one frame is dummy and other frame has big X line on it with conditions. Is this a right way to create check box! Please help thanks!

and one frame is dummy and other frame has big X
line on it with conditions. Is this a right way to
create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine.

Change COPA Report - need to add Variable and Characteristics

Hello,
I need to change the existing COPA report, Need to add WBS element as a selection criteria and also a characteristics so it can be drilled down. Create WBS as a global variable in KE3E and it is not showing up in when i change the report in KE30 in the available list of characteristics. And also it is not showing up in KE35 when i change the general selection to add as a Variable.

Go to KE91 and create the report.
In KE91, the Characteristic Cost element (KSTAR) is available. Add it as below.
Cost Element .... Check the box Hierarchy node ...... check the box Variable on/off ...... KSTAR...... Cost element.
After this, just check in Variable, the Cost element shuold appear
Line item based reports are defined in KE91 (segment level reports in KE31).
Both types of reports can be started in KE30 and changed in KE32
Let us know if you still have any queries
Thanks
Edited by: nkonnipati on Feb 19, 2012 5:34 AM

CRM_ORDER_MISC 020 : Please report valid absence/attendance type

Hi,
When I am creating a serviceconfirmation in using crmd_order, I am getting an this error: CRM_ORDER_MISC 020.
An error has occurred in the system RSUCLNT070 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
Transmission log
Please report valid absence/attendance type for previous week records! (Notification W Z000CATS 011)
A master record for 423430/ORDT exists only in 2010 (Notification E KL 002)
I thought this could probably be because the time reporting was not done for the previous weeks when i was using old service orders to create confirmations. I have created new service orders and created new service confirmations but its till throws the same error.
Any idea how I can find the origin of this error. How is this error triggered?
Edited by: NeenaJ on Jan 4, 2012 3:39 PM

Hi Team,
I am also facing the same issue. Our CRM consultant is running a program to post a labour Cost.
We are getting below error msg :
Error
in system ECDCLNT120 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors occurred while transferring the document into another system. To view the error
messages, see the enclosed log.
Transmission log
The attendance/absence type 03/* does not exist on 18.03.2014 (Notification E HRTIM00CATS 081)
Could you please help me on this?
Thanks & Regards,
Uttam

Reasons for Introducing database functions for Discoverer Reporting Needs

Hi All,
I would like to know the criteria other organizations have used in creating custom database functions specifically for Discoverer reporting needs. It seems good and appropriate to identify these reasons in order that they have a sufficiently good reason (e.g. in presenting this to a change management board).
Here is a quick swipe:
-query explain plan improvements
-take away the complexity of having the end user deal with complex calculations
-consistency of a value (e.g. a complex amortization calculation)
-an attribute is used from a dependent table with a minimum cardinality of zero
Can anyone list other good reasons in terms of Discoverer reporting?
Thanks,
Patrick
Edited by: Patrick Bacon on Jul 15, 2009 10:30 AM

Hi Patrick
In addition to the reasons you have given the reasons for having functions anyway apply just as equally to Discoverer as they do to other applications.
Typically the main reasons why I would use a function are:
a) due to the complexity of the code, or
b) to evaluate something which an end user either could not do or does not have access to.
For example if a user needs to have aggregations from multiple tables side by side in a report, typically from tables which have no joins between them, I write functions to go get the individual results.
One specific function that I use a lot is one that calculates the number of working days between any given two days. Some of my HR customers use such a function to calculate the number of sick days for an employee when obviously only working days should count. Doing this in a normal Discoverer calculation would be very hard. Retail customers might use this for calculating the number of days it took to ship and item.
There are other reasons why I use functions but these are the typical ones.
Best wishes
Michael

Report for absences

Hi Friendsl,
I need to create a absences report displaying the list of absences with the absence quota being deducted for the absence along with no.of days used in the quota and the year to which the quota belongs.I have checked in infotype 2001 but they is no field for absence quota deducted by the absence.
Suppose if have the quotas as below in infotype 2006
3 days from 2005
30 days 2006
30 days 2007
I take 6 days of vacation in year 2006 through infotype 2001.This 6 days vacation has to be 3 days from quota of 2005 and 3 days from quota of 2006.
The report should display this information as a list.
Can anyone provide sample code on this..
Thanks in advance,
Vadivel

Hi Vadivel,
I think for your requirement ABAP query will do. Just create your own query and generate the report.
Regards
Pavani
<b>Remainder: Points to be given on Answers</b>

Issue in MSS Report - Team Absence Overview after backend patching

Hi Experts,
We have SAP EP 640 SP23 connected to backend ERP2004 SP23. we have applied SAP_HRCGB patch 60 on backend system and now facing issues in accessing MSS reports from portal - Team Absence Overview, Basic Employee Data,etc.
Exception from defaulttrace is :
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/Pearson/com.pearson.Roles/com.pearson.FT-UK2/com.pearson.MSS_UK2/com.pearson.employee_review_2/com.sap.pct.hcm.eeprofilemonitoringoftasks
When we apply patches in backend system (for SAP_HR component), is it mandatory to apply patches for the deployed ESS/MSS business packages in portal also. And where can we find the information which patch of business package is corresponding to backend patches.
Would highly appreciate your help.
Regards
Davinder

yes its mandatory to upgrade both FRONT END And backend to the compatible levels.
You cant have one at a higher level than other.
You need to read the notes which are regularly updated by SAP.
You can search for these notes by giving Stack level
Service.sap.com

Reporting of absence approving ?

hi there,
i have to implement absence approving in our new ESS-portal (netweaver 2004's, 7.00)
for 1200 employees.
the backend HR system is ECC 6.0.
no i have a question from the employee management department here:
they want to report the abscences with the workflow behind it ! they want it as an flexible report....e.g. they want to enter the employee number in backend HR and see what absences the user has entered, who has approved/rejected it, etc.... etc.....
i can't find any good report for that !
any ideas ?
reg, Martin

Hi
1-The Cisco Extension Mobility and Cisco Extension Mobility Cross Cluster features keep a record of the devices to which users are actively logged in. For the Cisco Extension Mobility feature, the actively logged-in device report tracks the local phones that are actively logged in by local users; for the Cisco Extension Mobility Cross Cluster feature, the actively logged-in device report tracks the local phones that are actively logged in by remote users.
Please find the below link:-
https://supportforums.cisco.com/thread/2184881
2- For your question , you need advanced solution which will help you to monitor status of user , as IPCC .,etc..
Thanks
Please rate all useful information

Report needed - Open materials on PO, sorted by material and not PO number

Hello,
I've been trying to obtain a report that can give me a list of materials that are open for all PO numbers. Instead of this being sorted by PO number, I want it sorted by material number.
I've gone through all the ME2 transactions (i.e. ME2L, ME2M, ME2N, etc.) and all iterations of the scope of list with the selelction parameter WE101, but every time it comes up sorting by Purchase Order and then listing the open materials on the specific PO.
I've gone through transaction ME80FN, which gives all the proper information I need, but there's no indicator in there looking for materials with only open quantities...it only gives both open and closed.
Does anyone have any recommendations for a standard SAP report that can be accessed?
Edited by: Andy Slania on Sep 27, 2010 9:15 PM

Andy,
I don't think there is one in the older R/3 systems. I don't really know, because I quit looking after I discovered SAP Query (SQ01)..
If a standard SAP report doesn't meet business requirements, one can have an ABAPer create a custom (Z) report. However, another path is to use SQ02/SQ01 to create reports that may meet the needs, without commissioning a new ABAP report.
In 4.6C it is possible to create Queries that have all the data found in the ME2* reports, but additionally can have ALV output. Of course, in your case, since you can define 'sorts' in queries, ALV becomes a moot point.
A Query expert can create enhanced PO reports that will satisfy most any requirement. If the query infoset uses a SAP database, such as MEPOLDB, then it is not even necessary to create joins of tables - SAP has already done the heavy lifting.
Best Regards,
DB49

Custom Report Needed

Hi,
One of my client needs the custom report as follows . The report should display the MONTHLY SALES QTY , AVAILABLE STOCK AT THE ENDOF THE MONTH for an Item by Warehouse or Location. The format is like this
                                   Item1                                                                         Item2
                  Monthly Sale QTY,   Available Stock                Monthly Sale QTY,   Available Stock
WHS-1                     x                         y                                          x                               y
WHS-2                     x                         y                                          x                               y
WHS-3                     x                         y                                          x                               y
if any custom query or XL- Report available , plz reply me .
Regards,
Srinivas

Hi Srini,
Check the thread,
Re: SALES REGISTER QUERY
Customer Aging report query
aging query
Regards,
Madhan.

Report needed: Absences x Quotas

Similar Messages

Maybe you are looking for