Report no longer pulls in data

Hi All,
Very weird thing happened today. I have a report that connects to an ODBC SQL connection. It was pulling in data fine from this connection and producing a report. All of a sudden, the report no longer shows data anymore when I submit the parameters or when refreshing.
Some things I did to test the connection is pull the data in excel via the same ODBC connection and it worked. I also created a new crystal report and it also worked. Is there a way to restore my original report to get it woking again? I would hate to have to start this report from scratch!
I am using Crystal Report 2008 SP1. This report is also being test into VS 2008 web app which was also working but ceased to work at the same time.
Thank you in advance.

Hi Antoine
There are two ways to set the location of the data source your report points to, depending on your connection type:
For ODBC and Native Connections
1. On the 'Database' menu, click 'Set Datasource Location'.
2. In the 'Current Data Source' section, click the data source to be changed. You must click each individual table in the data source one by one. If the data source is a stored procedure you will not see individual tables.
NOTE
In Crystal Reports 10, XIR1, and XIR2, if you are mapping from a data source such as a stored procedure where the report designer can not determine which fields should be mapped automatically, you will see a 'Mapping' dialog box where you can manually map fields, as in the procedure cited above.
3. In the 'Replace with' section, click the data source you want the report to use.
4. Click 'Update'.
5. Close the 'Set Datasource Location' window.
The report now points to the new location.
For Native Connections Only:
1. On the 'Database' menu, click 'Set Datasource Location'.
2. In the 'Current Data Source' section, click 'Properties' to expand it and right-click 'Database Name: <path to database>'.
3. Click 'Edit' and then type the path to the
new data source location.
4. Close the 'Set Datasource Location' window.
The report now points to the new location.
Regards
Girish Bhosale

Similar Messages

Report is not pulling the data from multiprovider in BI 7.0

Hi BW gurus,
We have upgraded our BW systems from 3.5 to BI 7.0.
According to our requirement we did some modifications(added some new cubes) to existing multiprovider. All the objects and assignments looks good in the multiprovider.
We are facing a problem while executing the reports, report is not pulling any data from the particular multiprovider but I can see the data from the multiprovider.
For any selection creteria we are getting the msg like "No applicable data found".
Created a sample query with only two chars and two KF's no conditions, no exceptions still the report is not populating any data for any selection creteria.
Appreaciate for your help in this regard.
-BK

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

Report for pulling out data of Pricing Ref. Material

Hi All,
I want to know the transaction or report which can pull out the data of pricing ref. material used for any material in Sales Org .2 view. I mean to say that, if there are 100 materials created and 50 of them have a pricing material field populated by some xyz material then how can I pull out those 50 material numbers for which the pricing ref. material is populated along with the pricing ref. material number?
Await your quick response.
Hrishikesh

Hi
These are the standard reports for the material related.
Material Analysis-Incoming orders - MC(E
Material Analysis- Invoiced Sales - MC+Q
Material Returns-Analysis - MC+M
But i think you need to go for LIS , by creating a user defined report where in you need to take the character sics as pricing reference material (MATNR) as one of them
Regards
Srinath

Loaded data is not yet visible in Reporting (see long text) Message no. RSM

Hi All,
I have one issue in BI part of Solman. For one of the scenario of Solution Manager uses its own BI component (BI_CONT 7.03 SP08 SAP_BW 700 SP15).
There is one background job which has to update the data in one of the infocube 0SMD_PE2D. This job is getting failed for the past 2 months.
When i check the logs of that background job, it shows the long text as below.
Loaded data is not yet visible in Reporting (see long text)
Message no. RSM1130
Diagnosis
There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000000494, number APO_R4CEHVODV7XS7MRL741GSMV9UB.
Procedure
Choose Refresh to remove the inconsistency.
I went to RSA1 and selected that cube and choose "Execution changes - Manage". On the right hand side under request tab page it shows all the requests with request status as Green. In Monitor there is No Data Available
I found a similar thread [Loaded data is not yet visible in Reporting for Data Mart destination cub; unfortunately solution is not updated.
Could any one help me
regards
Naveen

Hi Aduri,
In LISTCUBE i am getting the following error
SQL Error 0
Unknown error in SQL interface
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE
Source system is Solution Manager only, production client and BI by default its running in 001 client. We dont have any APO system in our landscape.
Kindly advice
Regards
Naveen

Loaded data is not yet visible in Reporting (see long text)

hello
all
I have the next problem : in transaction RSA1, with infocube 0SD_C03 (Sales: Overview) click right/option/manage. appear the next message "Loaded data is not yet visible in Reporting (see long text)", when execute the rollup, show the next message : "Request 'REQU_48QRSOY3PVEJYDCO1B9II221D( 23393)' in DTA '0SD_C03' locked against Qualok using real-time Planning
as I solve this problem ?

Jurado,
What is the frequency of your real time load? was it loading when you query the cube? Have you checked the status of the load? Yellow, if Yellow and if the load is completed Change the technical status to Green and you should be able to see the data. Are you sure your query restriction (if any) satisfies the data?
Probably if you look closely you would know the answer.
Goodluck,
Alex
(Arthur Samson)

Pull the data from legacy System into report and display with SAP data

Hi Friends,
My requirement is-
Create report by processing data from SAP tables and prepare output.And Before displaying the output, I have to pull the data from non-sap system which is readymade (It will come as flat file with similar fields as Report structure has) and finally display the records from both SAP and Legacy System by filtering duplicates.

Steps:-
Define the file path on selection screen:-
Selection screen data
    select-options   (s_)
      parameters     (p_)
      radio buttons (r_)
      checkboxes     (x_)
      pushbuttons    (b_)
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-f01.
parameter:    p_file    type text_512 obligatory.
Start-of-selection.
data : l_fname type string. " File Name
l_fname = p_file .
call function 'GUI_UPLOAD'
    exporting
      filename                = l_fname
      filetype                = 'ASC'
      has_field_separator     = '#'
    tables
      data_tab                = lt_data
    exceptions
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      others                  = 17.
if sy-subrc <> 0.
    message e000 with 'Unable to upload file from the PC'(t13).
endif.
lt_data is of same structure as the fields in the file.
For filtering duplicates:-
delete adjacent duplicates from lt_data.
Now display the records using either ALV or using write statements.
You can display the records in any of the way you want.

How to pull the date parameter to appear in the report template?

Hi Gurus, and Experts,
I need to pull the date parameter I selected in BIP to appear in my report template? How to code this in BIP?
Identifier are: dto and dfrom
date fromat string: MM-dd-yyyy
Regards,
JP
Edited by: user10955574 on Nov 10, 2010 2:38 AM
Edited by: user10955574 on Nov 10, 2010 2:39 AM

Declare the parameter in the template as
<?param@begin:param1?>
and use it as <?$param1?>

Takes Long time for Data Loading.

Hi All,
Good Morning.. I am new to SDN.
Currently i am using the datasource 0CRM_SRV_PROCESS_H and it contains 225 fields. Currently i am using around 40 fields in my report.
Can i hide the remaining fields in the datasource level itself (TCODE : RSA6)
Currently data loading takes more time to load the data from PSA to ODS (ODS 1).
And also right now i am pulling some data from another ODS(ODS 2)(LookUP). It takes long time to update the data in Active data table of the ODS.
Can you please suggest how to improve the performance of dataloading on this Case.
Thanks & Regards,
Siva.

Hi....
Yes...u can hide..........just Check the hide box for those fields.......R u in BI 7.0 or BW...........whatever ........is the no of records is huge?
If so u can split the records and execute............I mean use the same IP...........just execute it with different selections.........
Check in ST04............is there are any locks or lockwaits..........if so...........Go to SM37 >> Check whether any Long running job is there or not.........then check whether that job is progressing or not............double click on the Job >> From the Job details copy the PID..............go to ST04 .....expand the node............and check whether u r able to find that PID there or not.........
Also check System log in SM21............and shortdumps in ST04........
Now to improve performance...........u can try to increase the virtual memory or servers.........if possiblr........it will increase the number of work process..........since if many jobs run at a time .then there will be no free Work prrocesses to proceed........
Regards,
Debjani......

SSRS Reports taking long time to load

Hello,
Problem : SSRS Reports taking long time to load
My System environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
Production Environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
I have created a Parameterized report (6 parameters), it will fetch data from 1 table. table has 1 year and 6 months data,      I am selecting parameters for only 1 month (about 2500 records). It is taking almost 2 minutes and 30 seconds
to load the report.
This report running efficiently in my system (report load takes only 5 to 6 seconds) but in
production it is taking 2 minutes 30 seconds.
I have checked the Execution log from production so I found the timing for
Data retrieval (approx~)    Processing (approx~)           Rendering (approx~)
10 second                                  15 sec
        2 mins and 5 sec.
But Confusing point is that , if I run the same report at different time overall output time is same (approx) 2 min 30 sec but
Data retrieval (approx~)       Processing (approx~)                Rendering (approx~)
more than 1 min                            15 sec
more than 1 min
so 1 question why timings are different ?
My doubts are
1) If query(procedure to retrieve the data) is the problem then it should take more time always,
2) If Report structure is problem then rendering will also take same time (long time)
for this (2nd point) I checked on blog that Rendering depends on environment structure e.g. Network bandwidth, RAM, CPU Usage , Number of users accessing same report at a time.
So I did testing of report when no other user working on any report But failed (same result output is 2 min 30 sec)
From network team I got the result is that there is no issue or overload in CPU usage or RAM also No issue in Network bandwidth.
Production Database Server and Report server are different (but in same network).
I checked that database server the SQL Server is using almost Full RAM (23 GB out of 24 GB)
I tried to allocate the memory to less amount up to 2GB (Trial solution I got from Blogs) but this on also failed.
one hint I got from colleague that , change the allocated memory setting from static memory to dynamic to SQL Server
(I guess above point is the same) I could not find that option Static and Dynamic memory setting.
I did below steps
Connected to SQL Server Instance
Right click on Instance go to properties, Go to Memory Tab
I found three options 1) Server Memory   2) Other memory   3) Section for "Configured values and Running values"
Then I tried to reduce Maximum Server memory up to 2 GB (As mentioned above)
All trials failed, this issue I could not find the roots for this issue.
Can anyone please help (it's bit urgent).

Hi UdayKGR,
According to your description, your report takes too long to load on your production environment. Right?
In this scenario, since the report runs quickly in developing environment, we initially think it supposed to be the issue on data retrieval. However, based on the information in execution log, it takes longest time on rendering part. So we suggest you optimize
the report itself to reduce the time for rendering. Please refer to the link below:
My report takes too long to render
Here is another article about overall performance optimization for Reporting Services:
Reporting Services Performance and Optimization
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Report taking long time to load

Hello Everyone,
In my report server there are two folders. both contains 2 reports that are retrieving the data from SQL server database (using procedures with few parameters in it).
but reports in one folder loading(when I clicked on report to load, not at data retrieving time) quickly (in 2 to 3 seconds).
and in another folder same process taking too long almost 2 to 3 minutes.
there is no specific permissions on both folders, I simply created folders & uploaded the reports.
but I am getting different loading time for both folder reports.
pleae tell me if more information is required.
thanks in advance

Hi UdayKGR,
As per my understanding, I think this issue can be caused by run folder2 report with a cache (a temporary cope of the report), while folder1 report id render on demand. So the folder2 report render report more quicker than folder1 report. For more
details, please see the following document:
http://msdn.microsoft.com/en-us/library/ms178821.aspx
Besides, the SQL views provide the execution log information. The “2” and “3” views were added in more recent releases and contain new fields or they contain fields with friendlier names than the previous releases. So we can look at the ExecutionLog3
to see the most recent data. Especially the Source field. For more details, please see:
http://technet.microsoft.com/en-us/library/ms159110.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

Reports no longer work after upgrading to SCCM 2012 R2

I upgraded my SCCM 2012 SP1 environment to R2 and reports no longer work. I've removed the site role, waited a day, and added it. I've also verified the account (used by the reporting site role) has access to the DB and can logon locally. The
problem still persists. Here's a copy/paste of the error:
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
Microsoft.Reporting.WinForms.ReportServerException
Cannot read the next data row for the dataset DataSet1. (rsErrorReadingNextDataRow)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
Microsoft.Reporting.WinForms.ReportServerException
Conversion failed when converting the nvarchar value 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXscrubbed' to data type int.
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
I've tried many other TechNet solutions as well with no improvement:
http://social.technet.microsoft.com/Forums/en-US/ae08aa43-054d-47e7-99fb-c4f101962478/reports-not-working-after-upgrade-to-sccm-2012-r2-?forum=configmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/77bad9b6-de0e-42d3-ae9f-e7c9d26b4330/reporting-error-after-upgrading-to-sccm-2012-r2?forum=configmanagergeneral
Any other thoughts on this?

So to be clear you have Done both the Mofcomp and Added the correct account to the Windows Authorization Access Group?
What is version of SQL are you using?
Is SSRS remote or local to CM12?
What service account are you using for SSRS?
Bases on the error message you are getting this within the console, Does the native SSRS report work? BTW I never recommend accessing the report via the console.
http://be.enhansoft.com/post/2013/09/10/Should-Configuration-Manager-SSRS-or-ASP-Reports-be-Accessed-from-the-Browser-or-the-Console.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Report with plant and expenditure data.

My clients requirement is as below.
Need a report from Plant maintenence of the total spend per plant for 2007
Report columns should be:
Plant Name -- Dollar Spend
can any one suggest any one table or a combination from which i can pull the data?

Hii..
I can give you some idea how to give such kind of report.
you can extract data from bseg giving all the g/l's of expenditure with the plant on the input screen u can give Plant & FY.the logic would be as soon as the user enter the input data the zreport reads amount posted to all the g/ls for that particular FY for that particular plant.
Hope it will help you.
Regards,
Aakash

How we will pull the data from Sap-Bi to sap-Bpc

Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AM

Tough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection...

Hyperion System 9.3.1 reports taking longer time for the very first time

We are on Hyperion System 9.3.1. The Financial reports are taking longer time (like 2 to 3 minuter) for the very first time for each login. The subsequest reports are does work faster.
The behaviour is same for the Production and Development environments.
All the reporting services have given enough JVM heap size.
FYI, Reporting and Workspace runngin on the same server. Workspace/Reporting are clusted in two servers. HFM app is running on different server. HFM web is on different server. Shared Services is also on running on different server.
Any help would be greately appreciated.
Thanks.

The reason they run quicker the subsequent times, is because the data has already been cached in the system.
You could try the usual tricks to speed the report up:
- move items into POV
- have children and parent in the same row
- arrange dimensions in inverse outline order
- remove excessive formatting
- push report calculations back to the data source
We have found that using lots of dynamically calculated members also slows down reports, so try and limit the number of these.
Hope this helps. If not maybe give us an idea of how the report is created to see if other changes could be made.

Report no longer pulls in data

Similar Messages

Maybe you are looking for