Report on Active Directory User Attributes in SCCM 2012
I need to output a list of all users in a collection, along with certain user attributes from Active Directory. I can get part of what I need with the following query:
SELECT v_FullCollectionMembership.ResourceID,
v_R_User.Windows_NT_Domain0,
v_R_User.Distinguished_Name0,
v_R_User.Full_User_Name0,
v_R_User.Mail0,
v_R_User.User_Name0
FROM v_FullCollectionMembership, v_R_User
WHERE v_FullCollectionMembership.ResourceID = v_R_User.ResourceID
AND v_FullCollectionMembership.CollectionID = 'SMS00002'
If possible I need to add:
Last logon timestamp
User account status (enabled or disabled)
I have added "lastLogon" and "lastLogonTimestamp" as additional attributesunder Active Directory User Discovery. This discovery method is enabled and I have run a full discovery about a month ago, and again today. I read in
another thread that these attributes should appear in the table v_R_User, however they have not. Is v_R_User the right place to look for this or is there another view or table I can query?
Once I have the above sorted out, how can I find the user account status in SCCM? I have done reports in the past directly from AD and used the 'useraccountcontrol' attribute and I noticed there is a column named 'User_Account_Control0' in v_R_User, however
the values do not match those found in Active Directory.
Thanks.
Have you checked the attribute from the Active Directory in decimal format? Check that and compare it to the value ConfigMgr has stored in its 'User_Account_Control0'...
User Account Control tells you multiple things of the account, for example does the account have "Smart card login required" -option checked from the account properties.
The tricky part here is to actually get the report show you what you really want, because "useraccountcontrol" -attribute is a numeric value, you have to calculate what decimal combination means what in readable text.
More info on the attribute can be found from here
http://support.microsoft.com/kb/305144 and from there you can also find the values for different settings. For example:
account is enabled = 512
account is disabled = 514
account is enabled with smart card = 262656
Similar Messages
-
I need to create an SCCM report to show last logged on user on all machines and the Active Directory department attribute of that last logged on user.
You problem is here.
right
join v_R_User USR on USR.ResourceID
= CS.ResourceID
USR.ResourceID != CS.ResourceID, you need to map the username to the user logon to the PC. By using the user’s department information you will
end up with unreliable results.
Anyways you need to make these changes to your query.
left
join v_R_User USR on USR.Unique_User_Name0
= CS.UserName0
http://www.enhansoft.com/ -
User login report in Active Directory for specific date and time
I want to get User login report in Active Directory for specific date and time e.g user logged in at15-01-2015 from 8:00am to 4:00pm
Is any query, script or any tool available?
Waiting for reply pleaseYou can identify the last logon date and time using my script here: https://gallery.technet.microsoft.com/scriptcenter/Get-Active-Directory-User-bbcdd771
If you would like to get back in time and see when the user did a logon / logoff then you need to have auditing enabled. Once done, you can records from Security log in the event viewer: https://social.technet.microsoft.com/Forums/windowsserver/en-US/98cbecb0-d23d-479d-aa65-07e3e214e2c7/manage-active-directory-users-logon-logoff-events
I have started a Wiki about how to track logon / logoff and it can help too: http://social.technet.microsoft.com/wiki/contents/articles/20422.record-logon-logoff-activities-on-domain-servers-and-workstations-using-group-policy.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
ThumbnailPhoto Attribute Active Directory Users & Computers
Hi, I have successfully imported user pictures within the AD in respect of the thumbnailphoto attribute and this is being replicated as part of the GC. Does anyone know of any extensions for Active Directory Users & Computers so that an administrator
can view the photo in the way of an extra tab etc. The Domain and Forest are currently 2012 functional mode. Any help of viewing the photos within AD users & Computers would be great.
Carl Smith MCITP-EABelow thread might be helpful,
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/c9f7385f-8d34-47a6-a789-6d240541b5da/ad-user-properties-tab?forum=
Regards,
Gopi
JiJi
Technologies -
The Netscape/NDS AddUser implements inetOrgPerson, and some other objects/Attributes not implemented in Active Directory Object Attributes, and I receive errors about the Attributes. Could you tell me the correct Attribute definition for the default DS, to add a user?
Unsure what you mean. iDS 5 implements the inetOrgPerson as of the RFC. It is made of 4 objects top, person, organizationPerson and inetOrgPerson. The user object in MAD using many more MS specifi attributes in the top class. (53 extras)
-
11gr2 Active Directory User Target Delete Recon Search Root
Hi All,
latest AD conector with the patch.
Have a situation where I need to change the root or base search for the delete recon. by default it seams to want to search at the domain level but that won't work for us. Checked the doc and can't seem to find anyway to change this for the delete recon.
Thanx in advance
FredHi,
The issue is still pending. I am specifying the following parameters for the scheduled job :
Batch Size : 100
Object Type : User
Batch Start : 1
Resource Object Name : AD User
Filter : startsWith('samAccountName','c')
Scheduled Task Name : Active Directory User Target Recon
Incremental Recon Attribute : uSNChanged
Search Base : <blank>
IT Resource Name : Active Directory
Search Scope : subtree
Latest Token : <blank>
Sort By : samAccountName
Number of Batches : All
Sort Direction : asc
The job runs successfully but no records are reconciled into UD_ADUSER table and the job reports the following error in the logs :
[2012-10-25T02:32:04.785-07:00] [oim_server1] [ERROR] [] [org.quartz.impl.jdbcjobstore.JobStoreCMT] [tid: QuartzScheduler_OIMQuartzScheduler-iamoimdev-v1.capgroup.com1351057898397_MisfireHandler] [userId: oiminternal] [ecid: 80eeb34d89d5ed80:-343bffe9:13a9150ba30:-8000-0000000000000005,1:24567] [APP: oim#11.1.2.0.0] MisfireHandler: Error handling misfires: Unexpected runtime exception: null[[
org.quartz.JobPersistenceException: Unexpected runtime exception: null [See nested exception: java.lang.NullPointerException]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3042)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.manage(JobStoreSupport.java:3789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.run(JobStoreSupport.java:3809)
Caused by: java.lang.NullPointerException
at org.quartz.SimpleTrigger.computeNumTimesFiredBetween(SimpleTrigger.java:800)
at org.quartz.SimpleTrigger.updateAfterMisfire(SimpleTrigger.java:514)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doUpdateOfMisfiredTrigger(JobStoreSupport.java:944)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.recoverMisfiredJobs(JobStoreSupport.java:898)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3029)
Edited by: IDM_newbie on Oct 25, 2012 2:38 AM -
SMB access for Active Directory users
Hi there,
My server is an OD Master bound to AD for authentication and my institution's Kerberos realm.
When I try to share files from the server via SMB and connect as an Active Directory user I get the following error in the logs:
[2009/06/11 12:02:27, 1, pid=5308] /SourceCache/samba/samba-187.8/samba/source/libads/kerberosverify.c:ads_verifyticket(428)
adsverifyticket: smbkrb5_parse_name(myserver$) failed (Configuration file does not specify default realm)
[2009/06/11 12:02:27, 1, pid=5308] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:replyspnegokerberos(340)
Failed to verify incoming ticket with error NTSTATUS_LOGONFAILURE!
I've read something vague about having to Kerberize the SMB service seperately so I'm not sure if that's the problem.
My smb.conf file is as follows:
; Configuration file for the Samba software suite.
; ============================================================================
; For the format of this file and comprehensive descriptions of all the
; configuration option, please refer to the man page for smb.conf(5).
; The following configuration should suit most systems for basic usage and
; initial testing. It gives all clients access to their home directories and
; allows access to all printers specified in /etc/printcap.
; BEGIN required configuration
; Parameters inside the required configuration block should not be altered.
; They may be changed at any time by upgrades or other automated processes.
; Site-specific customizations will only be preserved if they are done
; outside this block. If you choose to make customizations, it is your
; own responsibility to verify that they work correctly with the supported
; configuration tools.
[global]
debug pid = yes
log level = 1
server string = Mac OS X
printcap name = cups
printing = cups
encrypt passwords = yes
use spnego = yes
passdb backend = odsam
idmap domains = default
idmap config default: default = yes
idmap config default: backend = odsam
idmap alloc backend = odsam
idmap negative cache time = 5
map to guest = Bad User
guest account = nobody
unix charset = UTF-8-MAC
display charset = UTF-8-MAC
dos charset = 437
vfs objects = darwinacl,darwin_streams
; Don't become a master browser unless absolutely necessary.
os level = 2
domain master = no
; For performance reasons, set the transmit buffer size
; to the maximum and enable sendfile support.
max xmit = 131072
use sendfile = yes
; The darwin_streams module gives us named streams support.
stream support = yes
ea support = yes
; Enable locking coherency with AFP.
darwin_streams:brlm = yes
; Core files are invariably disabled system-wide, but attempting to
; dump core will trigger a crash report, so we still want to try.
enable core files = yes
; Configure usershares for use by the synchronize-shares tool.
usershare max shares = 1000
usershare path = /var/samba/shares
usershare owner only = no
usershare allow guests = yes
usershare allow full config = yes
; Filter inaccessible shares from the browse list.
com.apple:filter shares by access = yes
; Check in with PAM to enforce SACL access policy.
obey pam restrictions = yes
; Don't be trying to enforce ACLs in userspace.
acl check permissions = no
; Make sure that we resolve unqualified names as NetBIOS before DNS.
name resolve order = lmhosts wins bcast host
; Pull in system-wide preference settings. These are managed by
; synchronize-preferences tool.
include = /var/db/smb.conf
[printers]
comment = All Printers
path = /tmp
printable = yes
guest ok = no
create mode = 0700
writeable = no
browseable = no
; Site-specific parameters can be added below this comment.
; END required configuration.
Any help would be much appreciated!!
Thanks.I am now having the same problem - a Windows server trying to access a file share on the Mac Server is presented with the same error message in the log files:
[2009/06/29 21:34:56, 2, pid=485] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:setupnew_vcsession(1260)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2009/06/29 21:34:56, 1, pid=485] /SourceCache/samba/samba-187.8/samba/source/libads/kerberosverify.c:ads_verifyticket(428)
adsverifyticket: smbkrb5_parsename(vifile$) failed (Configuration file does not specify default realm)
[2009/06/29 21:34:56, 1, pid=485] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:replyspnegokerberos(340)
Failed to verify incoming ticket with error NTSTATUS_LOGONFAILURE!
Workgroup manager can read from Active Directory - seems to be jiving correctly - my server (SMB) is in Domain Member mode...
When I try to access system from \\UNC command, I am presented with username/password prompt and nothing works.
Not feeling the Mac OS X love tonight.
Bill
System is bound to active directory - green light in Directory Utility -
Active directory users and computers wont start on a dc, "the server is not operational"
In our environment, we have 3 dc's
two which run server 2008 (they work perfectly)
and one never off branch dc that runs server 2008 r2.
We have been having some problems where we feel the replication isnt up too speed(stuff could take up to 24 hours to replicate) and now when i tried opening active directory users and computers i am met with this error window:
We have a third party DNS solution.
How do i troubleshoot this issue?dc01 (which replicates perfectly with dc02, and vise versa)
dcdiag /test:dns
C:\Users\adminuser>dcdiag /test:dns
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Hostingpartner\ourdc01
Starting test: Connectivity
......................... ourDC01 passed test Connectivity
Doing primary tests
Testing server: Hostingpartner\ourdc01
DNS Tests are running and not hung. Please wait a few minutes...
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : int
Running enterprise tests on : int.domain.com
Starting test: DNS
Test results for domain controllers:
DC: ourdc01.int.domain.com
Domain: int.domain.com
TEST: Delegations (Del)
Error: DNS server: ourdc02.int.domain.com. IP:xx.xx.xx.32 [Broken delegated domain domaindnszones.int.domain.com.]
Error: DNS server: ourdc02.int.domain.com. IP:xx.xx.xx.32 [Broken delegated domain forestdnszones.int.domain.com.]
Summary of test results for DNS servers used by the above domain controllers:
DNS server: xx.xx.xx.32 (ourdc02.int.domain.com.)
2 test failures on this DNS server
Delegation is broken for the domain domaindnszones.int.domain.com. on the DNS server xx.xx.xx.32
Delegation is broken for the domain forestdnszones.int.domain.com. on the DNS server xx.xx.xx.32
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: int.domain.com
ourdc01 PASS PASS PASS FAIL n/a PASS n/a
......................... int.domain.com failed test DNS
dcdiag on dc01(which can replicate with dc02)
C:\Users\adminuser>dcdiag
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: hostingpartner\ourdc01
Starting test: Connectivity
......................... OURDC01 passed test Connectivity
Doing primary tests
Testing server: hostingpartner\ourdc01
Starting test: Replications
[Replications Check,OURDC01] DsReplicaGetInfoW(PENDING_OPS) failed with error 8453,
Win32 Error 8453.
......................... OURDC01 failed test Replications
Starting test: NCSecDesc
......................... OURDC01 passed test NCSecDesc
Starting test: NetLogons
[OURDC01] User credentials does not have permission to perform this operation.
The account used for this test must have network logon privileges
for this machine's domain.
......................... OURDC01 failed test NetLogons
Starting test: Advertising
......................... OURDC01 passed test Advertising
Starting test: KnowsOfRoleHolders
......................... OURDC01 passed test KnowsOfRoleHolders
Starting test: RidManager
......................... OURDC01 passed test RidManager
Starting test: MachineAccount
......................... OURDC01 passed test MachineAccount
Starting test: Services
......................... OURDC01 passed test Services
Starting test: ObjectsReplicated
......................... OURDC01 passed test ObjectsReplicated
Starting test: frssysvol
......................... OURDC01 passed test frssysvol
Starting test: frsevent
......................... OURDC01 passed test frsevent
Starting test: kccevent
......................... OURDC01 passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0xC0002719
Time Generated: 04/04/2013 15:04:29
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC0002719
Time Generated: 04/04/2013 15:04:50
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC0002719
Time Generated: 04/04/2013 15:10:56
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC0002719
Time Generated: 04/04/2013 15:11:17
(Event String could not be retrieved)
......................... OURDC01 failed test systemlog
Starting test: VerifyReferences
......................... OURDC01 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : int
Starting test: CrossRefValidation
......................... int passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... int passed test CheckSDRefDom
Running enterprise tests on : int.domain.com
Starting test: Intersite
......................... int.domain.com passed test Intersite
Starting test: FsmoCheck
......................... int.domain.com passed test FsmoCheck
The problematic dc03:
Dcdiag gives the same output as dcdiag /test:dns
C:\Users\adminuser>dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = OURDC03
Ldap search capabality attribute search failed on server NTSDC03, return
value = 81
We have an infoblox dns server on ip address xxx.y.y.251.
first error in event logs on dc03:
error 1863
This is the replication status for the following directory partition on this directory server.
Directory partition:
CN=Configuration,DC=int,DC=domain,DC=com
This directory server has not received replication information from a number of directory servers within the configured latency interval.
Latency Interval (Hours):
24
Number of directory servers in all sites:
2
Number of directory servers in this site:
2
The latency interval can be modified with the following registry key.
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Replicator latency error interval (hours)
To identify the directory servers by name, use the dcdiag.exe tool.
You can also use the support tool repadmin.exe to display the replication latencies of the directory servers. The command is "repadmin /showvector /latency <partition-dn>".
i have also go several warning 2088, 2093, 2087.
And errors 1863 pointing to different directory partitions like schema/configuration/domaindnszones/forestdnszones -
Creating active directory users with dscl
Our mac workstations (OSX 10.8) are bound to a 2008 Active Directory server. We are attempting to use some existing dscl scripts on the mac client computer to create Active directory users. We can successfully read and change AD attributes of an existing user with dscl, but creating new users or new attributes for an existing user gives us an error. Here are some examples.
SUCCESSFUL READ OF AD USER ATTRIBUTE:
root# dscl -u administrator "/Active Directory/CXAD/All Domains" -read /Users/jholmes SMBHomeDrive
Password:
SMBHomeDrive: H:
root#
SUCCESSFUL DELETE OF ABOVE USER ATTRIBUTE
root# dscl -u administrator "/Active Directory/CXAD/All Domains" -delete /Users/jholmes SMBHomeDrive
Password:
root#
FAILED ATTEMPT AT RE-CREATING THE DELETED ATTRIBUTE
root# dscl -u administrator "/Active Directory/CXAD/All Domains" -create /Users/jholmes SMBHomeDrive
Password:
<main> attribute status: eDSInvalidRecordType
<dscl_cmd> DS Error: -14130 (eDSInvalidRecordType)
root#
The same error occurs when attempting to create a new user. Any ideas? Thanks in advance for any suggestions.In the end I could not find them; account info is ONLY stored locally in Open Directory when they have mobile accounts.
However, I found I could migrate their user directories in Terminal via ditto ( I connected the old macs via Firewire Target mode) , and when they log in all their stuff and settings are there.
the command is: ditto /Volumes/<old mac hard drive>/Users/<username> /Users/<username> -
Can not open Active Directory Users and Computers
Problem Reported:
Out of the blue this has started happening:
When I go to "Active Directory Users and Computers" I get this message.
"MMC cannot open the file C:\WINDOWS\system32\dsa.msc.
This may be because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you do not have sufficient access rights to the file.
Additional information:
This is a server that has been in use for 2+ years with active directory users that can and do login everyday.
As far as I know the system has no backup.
dsa.msc IS located in the system32 folder
I am using the administrator account.
OS:
Microsoft Windows Server 2003 R2
Standard x64 Edition
Service Pack 2
Please help with detail. Thank you.Have you tried to uninstall ADUC administrative tool and re-install it again? If no, please give a try.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password -
Cannot log into DTR with Active Directory User
Greetings,
I have set up and installed JDI correctly. I can log into /devinf, the cbs, cms and sld systems with no problem using both Administrator and my JDI.Administrator that I assigned to an Active Directory user. I can log into the DTR using a user from the database (i.e. Administrator), however, when trying to access the DTR with an Active Directory user, I get the following message:
500 Internal Server Error
SAP J2EE Engine/6.40
Application error occurred during the request procession.
Details: Error [javax.servlet.ServletException: Group found, but unique name "businessUnit.all.guests" is not unique!], with root cause [com.tssap.dtr.server.deltav.InternalServerException: Group found, but unique name "businessUnit.all.guests" is not unique!]. The ID of this error is
Exception id: [0012798F81680042000000090000165C0003FE9AA3C0B86B].
This group exists in multiple domainshowever, this has not caused us any issues to date with our portal and other pieces of SAP WASit's only this DTR error.
Any help is greatly appreciated.
Thanks,
MartyHi Marty,
In the document available at the link enclosed below, there is a part that explains how to configure DTR so that it always uses "Unique-IDs".
http://help.sap.com/saphelp_nw04/helpdata/en/20/f4a94076b63713e10000000a155106/frameset.htm
It is mentioned that this is valid for LDAP, but the information is applicable for Active Directory as well.
Regards,
Manohar -
We recently upgraded from 10.6 server to 10.8 server and are having trouble with AFP shares and Active Directory. We have shares on each of our OS X servers that should be mountable by any Active Directory user at the site the server resides. In 10.6, this worked beautifully. Simply adding the appropriate AD groups with appropriate permissions to the ACL of the folder(s) being shared worked without a hitch. In 10.8 server, this is not working. Permissions are defined correctly (as far as I can tell), the server is bound to AD, but yet no AD user who should have access can mount the share. When attempting to mount the share on a 10.6 client, the user gets the short and simple "You entered an invalid username or password. Please try again." On a 10.7 client, the window shakes.
What confuses me even more is that no local users can mount the share as well. I try as our admin account, I receive the following error message on our 10.6 clients:
Actually, as I was forumulating this post, logging in as the server administrator account is now working...???!!!
This was the error message we were receiving on 10.7 clients before it magically started working:
In any case, authenticating as an AD user is still no go. Any ideas?I had something similar to this. In the name field put in DOMAIN\username rather than just the name.
-
Issue with Active Directory User Target Recon
Hi ,
I am facing an issue with Active Directory User Target Recon
My environment is OIM 11g R2 with BP03 patch applied
AD Connector is activedirectory-11.1.1.5 with bundle patch 14190610 applied
In my Target there are around 28000 users out of which 14000 have AD account (includes Provisioned,Revoked,Disabled accounts)
When i am running Active Directory User Target Recon i am not putting any filter cleared the batch start and batch size parameters and ran the recon job .Job ran successfully but it stopped after processing around 3000 users only.
Retried the job two three times but every time it is stopping after processing some users but not processing all the users.
Checked the log file oimdiagnostic logs and Connector server logs cannot see any errors in it.
Checked the user profile of users processed can see AD account provisioned for users
My query is why this job is not processing allthe users.Please point if i am missing some thing .
thanks in advanceCheck the connector server load when you are running the recon. Last time I checked the connector, the way it was written is that it loads all the users from AD into the connector server memory and then sends them to OIM. So if the number was huge, then the connector server errored out and did not send data to OIM. We then did recon based on OUs to load/link all the users into OIM. Check the connector server system logs and check for memory usage etc.
-Bikash -
Windows 2008 Server - Cannot run Active Directory Users and Computers
Hi,
I am running Windows 2008 Server with latest windows updates installed. Directory Services Role also.
I attempt to open Active Directory Users and Computers tool and I get a;
Microsoft Visual C++ Runtime Library error;
"The Application has requested the runtime to terminate it in a unusual way. Please contact the application's support team for more information"
I click ok, then get the following debug info;
Problem signature:
Problem Event Name: APPCRASH
Application Name: mmc.exe
Application Version: 6.0.6001.18000
Application Timestamp: 47919524
Fault Module Name: msvcrt.dll
Fault Module Version: 7.0.6001.18000
Fault Module Timestamp: 4791ad6b
Exception Code: 40000015
Exception Offset: 0000000000029b06
OS Version: 6.0.6001.2.1.0.272.7
Locale ID: 3081
Additional Information 1: 43aa
Additional Information 2: cf3a46656318492c1997480001b6b0e0
Additional Information 3: 3837
Additional Information 4: 92f72e0d0589ff77cef51e0a413aeff6
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
If someone could please assist, it would be very much appreciated.
Regards
B
Hi,
To solidly troubleshoot this kind of issue, we need to debug dump file. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
However, I am also glad to share my research.
Some third party applications may lead to this error. Please check if you install other third party applications on Windows server 2008?
Also, please follow the article below to perform necessary steps to see how it's going?
FIX: You receive an "invalid page fault in module MSVCRT.DLL" error message after you install the run-time libraries from Visual C++ 6.0
http://support.microsoft.com/kb/190536/en-us
Hope this helps.
Best wishes
Morgan Che -
Hi My self Arun in my current project i have a task on that active directory user need to automatically populate in share point list drop down please help me. is that any out of box feature in share point 2010 ?
Thanking You
ArunArun,
If you plan to implement the "Querying the Active Directory" based on my code snippet,
and if you do not have permission [your account must be the part of domain admin] to do so,
Then still you can do it in least effort through code,
string usersInXml = SPContext.Current.Web.AllUsers.Xml;your xml string look like this.
<Users><User ID="2" Sid="" Name="Administrator"
LoginName="i:0#.w|murugesan\administrator" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1" Sid="" Name="Murugesa Pandian" LoginName="i:0#.w|murugesan\murugesan" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1073741823" Sid="S-1-0-0" Name="System Account" LoginName="SHAREPOINT\system" Email="" Notes="" IsSiteAdmin="False" IsDomainGroup="False" Flags="0" /></Users>
You can user Linq to XML to filter the "LoginName,Name and Email and then populate your drop down list.
* User must be logged into the site at least once.
Murugesa Pandian.,MCTS|App.Devleopment|Configure
Maybe you are looking for
-
OutofMemory Error while sending file to database using Web services
I have a file of 30MB to be written to the MySQL database. I am doing this in Axis web services and it gives me the following error: (I am using Tomcat as the application server and Apache as the web server, Axis 1.3 and MySQL standard 5.0.21 version
-
How to Restore a data table from a 'dmp' file in a database of oracle ?
Hello, I want just to restore one table belonging in a database. I Have the dmp file which I must restore. Then I am asking if it's possible to restore only a table not all the databse ? If Yes, What I mut do to realize it ? I need really helps . Reg
-
How much space does a new app take?
My 16GB Touch is pretty full (about 360MB left after all the music is loaded). How much space does the typical app take up?
-
Hi experts, I have a sender systems which sends a file to three webservices,i.e file-webservice scenario using BPM,but here need to send to 3 webservices of a 3rd party systems in sequence.Can you tell me how many sender agreements,receiver agreement
-
Executing JRE from within C in Linux
Hello, I tried to execute the JRE and give it some arguments (In fact my Java application) from within C. I used the library function execl(...) to make this. Unfortunately I got error "Could not load JRE" and some shared object error. Anyone any ide