Report on percentage metrics with SQL

Hi All,
We have a requirement to create a report on few metrics.
Example
ORG COST_BY_ORG PERCENTAGE
FA1 total 100 14.29%
HG total 400 57.14%
JY total 200 28.57%
grand total: 700 100%
I was able to acheive till the totals by ORG. But not sure how I could include the percentage with in the same query.
Any ideas please!
Thanks,
Prathima

SQL> create table t (org,account,amount)
  2  as
  3  select 'A1', 101, 100 from dual union all
  4  select 'A2', 101, 20 from dual union all
  5  select 'A2', 102, 44 from dual union all
  6  select 'A3', 102, 34 from dual union all
  7  select 'A3', 103, 50 from dual union all
  8  select 'A4', 103, 29 from dual union all
  9  select 'A5', 103, 32 from dual union all
10  select 'A4', 120, 10 from dual
11  /
Tabel is aangemaakt.
SQL> select org
  2       , case grouping(org)
  3         when 1 then 'Total by ' || to_char(account) || ' Account: ' || to_char(sum(amount))
  4         else to_char(amount)
  5         end amount
  6       , to_char(round(100*sum(rtr),2)) || '%' percentage
  7    from ( select org
  8                , account
  9                , amount
10                , ratio_to_report(amount) over (partition by account) rtr
11             from t
12         )
13   group by account,rollup((org,amount))
14  /
OR AMOUNT                         PERCENTAGE
A1 100                            83,33%
A2 20                             16,67%
   Total by 101 Account: 120      100%
A2 44                             56,41%
A3 34                             43,59%
   Total by 102 Account: 78       100%
A3 50                             45,05%
A4 29                             26,13%
A5 32                             28,83%
   Total by 103 Account: 111      100%
A4 10                             100%
   Total by 120 Account: 10       100%
12 rijen zijn geselecteerd.Regards,
Rob.

Similar Messages

  • Will Report Builder 2012 Work with SQL Server 2008???

    Simple question really
    Will Report Builder 2012 work in conjunction with SQL Server 2008???
    Is it worth while upgrading?
    The main reason i ask is the ability to export in an xlsx format
    Thanks

    Hi Gmach,
    The version of Report Builder on SQL Server Reporting Service (SSRS) 2012 is Report Builder 3.0. The Report Builder 3.0 manufactures 2010 RDL reports, so it only works with the version of SQL Server 2008 R2 or later. So in your scenario, we can no connect
    to SQL Server 2008 Server using Report Builder that on SSRS 2012.
    If you have any questions, please feel free to ask.
    Regards,
    Charlie Liao
    TechNet Community Support

  • Creating the report in BI Publisher with SQL SERVER 2008

    Dear Team,
    I want to create report on BI Publisher....i am able to create report with the help of oracle database ...but i dont'nt know how to create DATA MODEL in sql server 2008 ...
    plz tell me the wright way....
    Thanks,
    Him..

    Hi Jin Chen,
    Thank you for your response. I have disabled all the Symantec End Point Protection Service, but problem persists..
    Further, I have checked through the ULS Log in SharePoint, there is more error reported there:
    11/03/2010 15:19:48.44 ReportingServicesService.exe (0x3510)  
    0x4064
    Windows SharePoint Services   Database                      
    6f8g Unexpected
    Unexpected query execution failure, error code 282. Additional error information from SQL Server is included below. "The 'proc_GetTpWebMetaDataAndListMetaData' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be
    returned instead." Query text (if available): "{?=call proc_GetTpWebMetaDataAndListMetaData(?,'F77D6A37-F8D2-492C-911C-923C8A135DEB',?,NULL,1,?,?,6187)}"
    11/03/2010 15:19:51.46 ReportingServicesService.exe (0x3510)  
    0x4064
    Windows SharePoint Services   General                      
    8e2s Medium  
    Unknown SPRequest error occurred. More information: 0x80020009
    11/03/2010 15:19:51.69 ReportingServicesService.exe (0x3510)  
    0x1EEC
    Windows SharePoint Services   General                      
    8e2s Medium  
    Unknown SPRequest error occurred. More information: 0x80020009
    Do you have any idea based on the error above?

  • Crystal Report 8.5 with SQL SERVER 2005 problems

    Post Author: AREVA
    CA Forum: Data Connectivity and SQL
    Hi All !We have some problems with Crystal Reports version 8.5 with SQL Server 2005: 1) When we want to generate a report (using data in SQL Server 2005) we have a popup message error : "impossible to loaded pdssql.dll".2) If we want to use SQL Server 2005, which Crystal Reports version we must used ? Is there any restrictions with this connectivity with 8.5 version ?Please, let me known, all informations about SQL Server 2005 and Crystal Report 8.5.Thanks for all !Best regards Anthony

    Hello Kamlesh,
    There is no expectation that the ActiveX viewer (RDC?) from CR8.5 will work in any version of Visual Studio .NET. There is also no expectation that the ActiveX viewer from CR8.5 will work on a machine with a 64 bit operating system.
    You're using VS2008. You should migrate to the bundled edition of CR for VS2008 (v10.5), the ReportDocument object, and the .NET Windows form viewer or Web form viewer.
    Sincerely,
    Dan Kelleher

  • How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

    Hi my name is vishal
    For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
    Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.Windows.Forms;
    using System.Data.SqlClient;
    using iTextSharp.text;
    using iTextSharp.text.pdf;
    using System.Diagnostics;
    using System.IO;
    namespace DRRS_CSharp
    public partial class frmPDF : Form
    public frmPDF()
    InitializeComponent();
    private void button1_Click(object sender, EventArgs e)
    Document doc = new Document(PageSize.A4.Rotate());
    var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
    doc.SetMargins(50, 50, 50, 50);
    doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
    doc.Open();
    PdfPTable table = new PdfPTable(6);
    table.TotalWidth =530f;
    table.LockedWidth = true;
    PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
    cell.Colspan = 6;
    cell.HorizontalAlignment = 0;
    table.AddCell(cell);
    Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
    para.Alignment = Element.ALIGN_CENTER;
    iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
    png.ScaleToFit(105f, 105f);
    png.Alignment = Element.ALIGN_RIGHT;
    SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
    SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
    conn.Open();
    SqlDataReader dr;
    dr = cmd.ExecuteReader();
    table.AddCell("Reprocessing Date");
    table.AddCell("Patient Name");
    table.AddCell("Dialyzer(Manufacturer,Size)");
    table.AddCell("No.of Reuse");
    table.AddCell("Verification");
    table.AddCell("DialyzerID");
    while (dr.Read())
    table.AddCell(dr[2].ToString());
    table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
    table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
    table.AddCell("@count".ToString());
    table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
    table.AddCell(dr[0].ToString());
    dr.Close();
    table.SpacingBefore = 15f;
    doc.Add(para);
    doc.Add(png);
    doc.Add(table);
    doc.Close();
    System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
    if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
    var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
    else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
    this.Close();
    The above code executes well with no problem at all!
    As you can see the file to which i create and save and open my pdf report is
    AssignedDialyzer.pdf.
    The column headers of table in pdf report from c# windows forms using iTextSharp are
    "Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
    "DialyzerID".
    However the problem i am facing is after execution and opening of document is my
    column headers in table in pdf report from
    c# and datas in it all appear in bold.
    I have browsed through net regarding to solve this problem but with no success.
    What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
    Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
    I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
    Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
    If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
    vb6,adodb with ms access using iTextSharp?
    I have approached Sound Forge.Net for help but with no success.
    I hope anyone/someone truly understands what i am trying to ask!
    I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
    Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
    I hope i get a reply in terms of solving this problem.
    vishal

    Hi,
    About iTextSharp component issue , I think this case is off-topic in here.
    I suggest you consulting to compenent provider.
    http://sourceforge.net/projects/itextsharp/
    Regards,
    Marvin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Report region with sql query

    Hi
    I have a report region with sql query. There are two regions in page. On top of page, user enters data and after that second region show enterd data which is report region
    based on sql query.
    Now,when this page is opned, as user had not entered any thing, report region shows "no data found" message. Is it possible to remove that message or
    may i conditionally disaply report region i.e if data is inserted then only report region is dispalyed.
    Thanks

    >
    i was trying with select count(1) in expression.
    >
    Just for your info, COUNT() (without any grouping obviously) with always return 1 row. If there are no result for the query then 1 row will be returned with a value of zero - so there are results returned.
    Secondly, why were you using COUNT(1) rather than COUNT(*)? That is is faster is a very common misconception and not true. If you need to know how many rows have been returned, use COUNT(*). If you need to take nulls into account (ie. not include them in your count) then use COUNT(column_name) and name the column that you are interested in specifically.
    Cheers
    Ben

  • Sql server 2005 reports with sql server 2014

    Can i upload SSRS 2005 reports as it is on SSRS 2014 and use it without doing anything extra or without changing anything ??
    I can use SSRS 2005 reports as it is with SSRS 2012. But for SSRS 2014 not sure.
    h2007

    You can upgrade the the RDL schema will be upgraded.
    Report definition (.rdl) files are automatically upgraded in the following ways:
    When you open a report in Report Designer in SQL Server Data Tools (SSDT), the report definition is upgraded to the currently supported RDL schema. When you specify a SQL Server 2008 or SQL Server 2008 R2 report server in the project properties, the report
    definition is saved in a schema that is compatible with the target server.
    When you upgrade a Reporting Services installation to a SQL Server 2014 Reporting Services (SSRS) installation, existing reports and snapshots that have been published to a report server are compiled and automatically upgraded to the new schema the first
    time they are processed. If a report cannot be automatically upgraded, the report is processed using the backward-compatibility mode. The report definition remains in the original schema.
    Reports are not upgraded when you upload a report definition file directly to the report server or SharePoint site. Upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file.
    After a report is upgraded locally or on the report server, you might notice additional errors, warnings, and messages. This is the result of changes to the internal report object model and processing components, which cause messages to appear when underlying
    problems in the report are detected. For more information, see Reporting Services Backward Compatibility.
    For more information about new features for SQL Server 2014 Reporting Services (SSRS), see
    What's New (Reporting Services).
    Check the below Microsoft link for more information
    http://msdn.microsoft.com/en-us/library/ms143674.aspx
    Mudassar

  • Integrating J2EE application with SQL Server Reporting Services

    Hello everybody,
    I want to integrate a J2EE application with SQL Server 2005 Reporting Services. In fact, it is the first time to be involved in developing an interoperability component between .Net web service and Java application. So I have learned for some time how to pass this challenge. Moreover, I found the following virtual lab is an excellent starting point "MSDN Virtual Lab: Implementing SQL Server Reporting Services with a Java Enterprise Edition (EE) Application" [http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032315323&EventCategory=3&culture=en-US&CountryCode=US]
    After going through the lab, I tried to apply the same code in my machine but I have stuck with the following error:
    {color:#ff0000}*; nested exception is:*
    org.xml.sax.SAXParseException: Premature end of file.
    {color}{color:#333333}I use the following tools:
    - Netbeans IDE 6.5
    - Java SDK: build 1.6.0_01-b06
    - Web Server: Apache Tomcat 6.0
    - axis Jars (axis.jar, axis-ant.jar, commons-discovery-0.2.jar, commons-logging-1.0.4.jar, jaxrpc.jar, log4j-1.2.8.jar, saaj.jar, wsdl4j-1.5.1.jar)
    - Reporting Tool: SQL Server 2005 Reporting Services
    I will be so grateful if someone help me. I am waiting your response
    this is a snippet of my code :
    {color}{color:#333333}
    package net;
    {color}{color:#333333}
    //import java.io.*;
    import com.microsoft.schemas.sqlserver._2005._06._30.reporting.reportingservices.*;
    import java.io.Serializable;
    * @author Abdullah Al Fararjeh
    public class NetData implements Serializable
    static String[] data;
    public NetData(){}
    public static String[] getData(String myURL, String searchStr)
    try{
    CatalogItem[] returnedItems;
    String folderName = "/";
    returnedItems = FindReports(folderName, myURL, searchStr);
    if(returnedItems != null && returnedItems.length > 0){
    int count = returnedItems.length;
    data = new String[count];
    for(int x = 0; x < returnedItems.length; x++){
    data[x] = returnedItems[x].getPath();
    else
    data = new String[] {"No Records Found"};
    return (data);
    catch(Exception e){
    System.out.println(e.getMessage());
    String[] s = new String[1];
    s[0] = e.getMessage();
    return (s);
    private static CatalogItem[] FindReports(String folderName, String serverUrl, String searchStr)
    try
    //CatalogItem find;
    ReportingService2005Locator loc = new ReportingService2005Locator();
    //retrieve a report from the service locator
    ReportingService2005Soap port = loc.getReportingService2005Soap(new java.net.URL(serverUrl));
    //set the HTTP Basic Authentication credintials using Stub object methods
    javax.xml.rpc.Stub stub = (javax.xml.rpc.Stub) port;
    stub._setProperty(javax.xml.rpc.Stub.USERNAME_PROPERTY, "abdullahPC\\abdullah");
    stub._setProperty(javax.xml.rpc.Stub.PASSWORD_PROPERTY, "mypassword");
    //set up a search condition where the item name contains the specified search string
    SearchCondition condition = new SearchCondition();
    condition.setCondition(ConditionEnum.Contains);
    condition.setName("Name");
    if(searchStr != null)
    condition.setValue(searchStr);
    else
    condition.setValue("");
    //create an array of SearchCondition which will contain our single search condition
    SearchCondition[] conditions;
    conditions = new SearchCondition[1];
    conditions[0] = condition;
    //Call the web service with the appropriate parameters
    CatalogItem[] returnedItems;
    System.out.println("before port.findItems");
    returnedItems = port.findItems(folderName, BooleanOperatorEnum.Or, conditions);
    System.out.println("after port.findItems");
    return returnedItems;
    catch(Exception e){
    System.out.println(e.getMessage());
    return null;
    {color}
    Edited by: Abdullah on Feb 8, 2009 3:03 AM

    I also need to do this. Were you successful in getting this to work? Is it possible for you to share how you accomplished this?

  • SHAREPOINT 2013 WITH SQL SERVER 2012 REPORTING SERVICES - NOT WORKING

    The SQL 2012 with SP1 is installed but the Reporting Services are not working and not able to connect the Sharepoint with it.
    i also TRIED TO install THE ADD-ON (rsSharePoint.msi) but it doesn't connect and show the Sharepoint Mode and cannot connect the Reporting services.
    If I install the Reporting Native feature then the reporting service config displays the Instance else doesn't show and connect to the sql server.
    But I am able to access the Configuration manager and TCP/IP are enabled.
    I have installed SQL 2012 and Sharepoint 2013. Please revert soon.
    Tks - Vinay

    Reporting Service
    http://msdn.microsoft.com/en-us/library/jj219068.aspx
    http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
    http://blogs.msdn.com/b/psssql/archive/2011/02/18/sharepoint-adventures-setting-up-reporting-services-with-sharepoint-integration.aspx
    http://dinesql.blogspot.in/2010/06/configuring-reporting-services-2008-r2_07.html
    http://www.codeproject.com/Articles/355461/Dynamically-Pointing-to-Shared-Data-Sources-on-SQL
    http://www.heysharepoint.com/problems-with-sql-2012-reporting-services/
    http://andrewcbancroft.com/2012/06/30/troubleshooting-sql-server-2012-reporting-services-and-sharepoint-2010-integration-part-1/
    Please find the helping URL
    Thanks
    Jaison A
    http://infomoss.blogspot.in

  • Sharepoint 2013 SSRS Interaction with Sql Server 2012 Reporting Services connecting to Sql Server 2008 R2 database

    Hi
    I'm working on upgrading sharepoint 2010 to sharepoint 2013 with sql server 2008 r2. I've ran into some problems but have been able to get a test farm upgraded. However to run SSRS 2013 it seems Sql Server 2012 Reporting Services are required. Upgrading
    to a full sql server 2012 database isn't an option. I know that sql server 2012 reporting services can use sql server 2008 r2 as a catalog and content database so I was wondering could this be a workaround? Importantly would I need a separate machine/virtual
    machine to host sql server 2012 reporting services? or could it live on the sql server 2008 r2 machine? Any pointers appreciated. Thanks Dan

    Remember that SSRS must be deployed on the SharePoint server. Having said that, yes you can install SSRS 2012 SP1 on a server running SQL 2008 R2. And yes, you can use 2008 R2 as your Database Engine server while SSRS 2012 SP1 runs on the SharePoint server.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • URL problems with SQL Server Reporting Services 2012 with wildcard SSL certificate

    Hi,
    I have single server, domain member, with SQL Server 2012 SP1 Reporting Services.
    I am trying to get work with url: https://reports.mydomain.com
    I have valid wildcard certificate (*.mydomain.com) implemented and configured URLs in Configuration Manager.
    https://reports.mydomain.com/ReportServer - works fine
    https://reports.3pro.hr/Reports/ - I got error:
    The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
    In rsreportserver.config I have:
    <Add Key="SecureConnectionLevel" Value="2"/>
    When looking my ReportServerService_date.log file I have something like:
    configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server internal url https://localhost:443/ReportServer.
    configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server external url https://serverhostname:443/ReportServer.
    configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using url root https://reports.mydomain.com/ReportServer.
    configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server internal url https://localhost:443/ReportServer.
    configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server external url https://serverhostname:443/ReportServer.
    configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using url root https://reports.mydomain.com/ReportServer.
    Also, error shown in log file:
    appdomainmanager!ReportManager_0-2!4c50!03/10/2013-20:24:53:: e ERROR: Remote certificate error RemoteCertificateNameMismatch encountered for url https://localhost/ReportServer/ReportService2010.asmx.
    ui!ReportManager_0-2!4c50!03/10/2013-20:24:54:: e ERROR: System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException:
    The remote certificate is invalid according to the validation procedure.
    Btw, is there a way to delete/disable access using https://localhost and/or servername (not FQDN) since SSL will not work in this way for me, and I want access only by full url - https://reports.mydomain.com , not localhost ..
    -- Hrvoje Kusulja

    I spent one of my 4 free support incidents with Microsoft (part of MSDN subscription) this year to get this investigated.  The tech support person helped me through several issues but had to leave to attend some training, and I got past the last hurdle
    before she called me back.  Here are the steps that resolved this issue for me.  I know for sure that step 5 was necessary.  Step 1 may not apply to you, and steps 2-4 may or may not have been necessary (they didn't immediately fix the issue,
    but I didn't roll them back either so they may have been necessary.)
    Step 1:
    Ensure you are editing the correct rsreportserver.config file.  I had been making changes to a file that was installed in C:\Program Files\Common Files\microsoft shared\Web Server Extensions\14\WebServices\Reporting, but that was a rsreportserver.config
    file for some sharepoint integration that I'm not using.  The correct path on my system was E:\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config, but yours may vary. If you can't figure it out, look in the registry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
    SQL Server\MSRS11.MSSQLSERVER\Setup in the key named SQLPath, and then go to the ReportServer subdirectory of that path.
    Step 2: 
    In rsreportserver.config, ensure that SecureConnectionLevel is set to the value 3.  Was set to 0 in my configuration.  Corrected line in your rsreportserver.confiog file should look like:
    <Add Key="SecureConnectionLevel" Value="3"/>
    Step 3:
    In rsreportserver.config, add the correct value to the <URLRoot> element (which already exists in the file.)  In my configuration, this value was blank.  The value should be the fully qualified path to your report server, with a hostname that
    is valid for your certificate.  For example, if my cert matches *.mydomain.local:
    <UrlRoot>
    https://myserver.mydomain.local/ReportServer
    </UrlRoot>
    Step 4:
    Ensure that your certificate exists in Trusted Root Certification Authorities in certmgr for the local machine.  I had the certificate installed as a Personal certificate for the local machine, which I still think was correct (the certificate wasn't actually
    the problem and worked correctly for Report Server, and the failure was caused by SSRS incorrectly making a https request to a localhost URL), but she had me remove the certificate from Personal and add it to Trusted Root Certificate Authorities.  That
    broke things and the cert was no longer listed as a cert I could bind to, so we then copied it so it existed in both Personal and Trusted Root Certificate Authorities.  This is how I left it, not sure if that was necessary.
    Step 5:
    This was the fix that finally got things to work. In rsreportserver.config, add the same value to the <ReportServerUrl> element (which also already exists in the file) that you added in step 3.  In my configuration, this value was also blank.
    The corrected value should be the same as in step 3, for example:
    <ReportServerUrl>
    https://myserver.mydomain.local/ReportServer
    </ReportServerUrl>
    Then restart your report server (stop & then start in Report Server Configuration Manager), and the problem should go away.  At least it did for me.
    Good luck!

  • SharePoint 2010 with SQL Reporting Services 2012 "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"

    i have a small sharepoint farm "2 servers" (WFE) and SQL Server 2012 ,
    i installed rsSharePoint for reporting services , as a read the Reporting services is Application Service  with SQL 2012 not as SQL 2008 R2 with SharePoint integrated mode, so after installation when am trying to configure the  SQL Server
    Reporting Services Application services i got the below error :
    "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"
    any kind of help would be much appreciated .

    I'm having the same issue, but to me it seems like the instructions I've seen are all over the place.  I already have SP 2013 and SQL 2012 SP 1 installed.  I already added the features for Reporting Services - Sharepoint and Reporting Services
    Add-in for SharePoint Products.  I didn't see the Reporting Service service in CA, so I ran the powershell scripts to add SPRSService and SPRSServiceProxy. 
    My initial quest, was to get the BI features enabled, which took me on the journey of adding the Report Services, then I got the error.
    Then when I read this about installing the BI features
    http://blogs.msdn.com/b/querysimon/archive/2012/11/26/installing-the-bi-features-of-sharepoint-2013.aspx, which I already had SQL and SP installed.  Do I have to rerun and selct the SQL Server PowerPoint for SharePoint option?  I have the PowerPoint
    Configuration Tool on my SQL server, I run it and I get PowerPivot for SP 2013 Configuranoi is missing prerequisits:  SP 2013 EE is required.  Which I have EE.
    Is Reporting Services different or in addition to the BI Feature (PowerPivot)? 
    Have I missed a step?
    Thanks for you help.
    Kim
    Kim.Williams

  • Reporting Service Error Code 7403, on SCCM 2012 R2 with SQL 2012 SP1 CU6

    Dear All,
    I am facing issue to install Reporting Services Point on SCCM 2012 R2 with SQL 2012 SP1 CU6. getting error messages id 7403. please let me know if SQL 2012 SP1 CU6 is supported with SCCM 2012 R2 or not & if you have any solution on it.
    Error Message: The report server service is not running on Reporting Service Point server "SCCM2012"; start the service to enable reporting.

    I am getting below error msg when trying to browse both sites
    1) For Reports
    The report server cannot decrypt the
    symmetric key that is used to access sensitive or encrypted data in a report
    server database. You must either restore a backup key or delete all encrypted
    content. (rsReportServerDisabled)
    Get Online Help
    Keyset does not exist (Exception from
    HRESULT:
    0x80090016)
    2) For Reportserver
    Reporting Services Error
    The report server cannot decrypt the symmetric key that is used to access
    sensitive or encrypted data in a report server database. You must either restore
    a backup key or delete all encrypted content. (rsReportServerDisabled)
    Get Online Help
    Keyset does not exist (Exception from HRESULT: 0x80090016)
    SQL Server Reporting Services

  • Using Interactive Report with SQL query accessing tables via db link

    Is there a known issue with using the interactive report in version 3.1.2.00.02 with SQL that is accessing tables via a database link? I get the error 'not all variables bound', I do not get this error when using the standard report for the same SQL?
    Thanks,
    Edited by: [email protected] on May 26, 2009 2:59 PM

    Varad,
    Good question, failed to check that. In fact there are errors. Dump file c:\oraclexe\app\oracle\admin\xe\bdump\xe_s002_3640.trc
    Mon Jun 15 08:48:11 2009
    ORACLE V10.2.0.1.0 - Production vsnsta=0
    vsnsql=14 vsnxtr=3
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    Windows XP Version V5.1 Service Pack 3
    CPU : 2 - type 586, 1 Physical Cores
    Process Affinity : 0x00000000
    Memory (Avail/Total): Ph:1051M/2038M, Ph+PgF:2273M/3934M, VA:1302M/2047M
    Instance name: xe
    Redo thread mounted by this instance: 1
    Oracle process number: 16
    Windows thread id: 3640, image: ORACLE.EXE (S002)
    *** ACTION NAME:(PAGE 2) 2009-06-15 08:48:11.743
    *** MODULE NAME:(APEX:APPLICATION 112) 2009-06-15 08:48:11.743
    *** SERVICE NAME:(SYS$USERS) 2009-06-15 08:48:11.743
    *** CLIENT ID:(ADMIN:232384011651572) 2009-06-15 08:48:11.743
    *** SESSION ID:(24.931) 2009-06-15 08:48:11.743
    *** 2009-06-15 08:48:11.743
    ksedmp: internal or fatal error
    ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_LdiDateFromArray+55] [PC:0x608B04F3] [ADDR:0x0] [UNABLE_TO_WRITE] []
    Current SQL statement for this session:
    select Stage,Procedure,Stp,FW,Reslt,MSG,date_run
    from bi_msg_VW@dwitnm
    order by 1
    ----- PL/SQL Call Stack -----
    object line object
    handle number name
    2FE1EA14 1207 package body SYS.DBMS_SYS_SQL
    2FE1F064 328 package body SYS.DBMS_SQL
    2ABDC520 5097 package body APEX_030200.WWV_RENDER_REPORT3
    2BD5E55C 1538 package body APEX_030200.WWV_FLOW_DISP_PAGE_PLUGS
    2BD5E55C 366 package body APEX_030200.WWV_FLOW_DISP_PAGE_PLUGS
    335BDA88 11190 package body APEX_030200.WWV_FLOW
    2BDBD1C8 255 procedure APEX_030200.F
    2AB58D10 30 anonymous block
    ----- Call Stack Trace -----
    I didn't include the call stack, it is too large. Now I'm even more puzzled that the IR would work while a sql report would fail.
    Bob

  • Connecting BI Web Server with SQL Server Express / Visual Studio Express for Report Development

    Hi,
    My company is using the Report Builder 3.0 to build the BI Reports ( I guess based on SQL Server 2008 R2). Our software vendor has provided us the web URL to access the BI Server. I want to generate the BI Reports with SQL Server Express or  Visual
    Studio Express instead of Report Builder 3.0. Need some guidance in this regard.
    regards, BI.Developer.

    Hi,
    Based on my research, if we want to open the report from report server to Business Intelligence Development Studio, we should download the report from report manager, then add this item in Business Intelligence Development Studio. For more details, please
    see the following steps:
    Type the URL in IE browser to access the repot manager.
    Browse to the RDL file folder or location.
    Hover over the report, and click the drop-down arrow near the RDL file.
    Click on download button, the download window will pop up now. Then save the rdl file.
    Click Manage option in the drop-down list, make a note of its Data Source Connection string.
    Create a Report Server Project in Business Intelligence Development Studio.
    Right-click the Reports folder to open the Add Existing Item dialog box, navigate to the location where you saved the .rdl file for the report, and then click Add.
    Right-click the Data Source to verify the connection string is correct.
    Besides, please make sure that software vendor had assigned ‘View reports’, ’Manage reports’, ‘Manage folder’ and ‘Manage data sources’ tasks for your account, so that you can download the report and view the data source.
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for

  • MB5B - Stock on posting date show in other Unit of measure

    Dearl All, Pls support me this case: I would like to see this report (MB5B - Stock on posting date) in other Unit of measure. This report shows stock in Basic Unit only. E.g Material A, base unit = M, other unit = ROL Report needs show stock in ROL.

  • What is The correct way to remove duplicates from the iTunes library?

    I have a 300GB external drive which over the last 5 years has got bloated with duplicate tracks. If I use the show duplicates option, I see 10,479 songs totalling over 50GB. Now, those songs that are shown, do they include the original that they are

  • To add attachment in BSP page

    Hi all, we have a requirement where we have to attach a doc in our BSP page. Please let me know how it can be achieved and in future how this doc can be retrived. Thanks in advance. Regards, Vithalprasad

  • Localization patch for France (Finance Module)

    Hi We want to launch E0business in France. kindly inform me what is the latest localization patch available for France (Finance Module). Thanks Krishna

  • OrgPublisher - Salary information

    Hi, I'm trying to include salary in an output format using OrgPub but can't figure out how to get a calculated value to return. This is my understanding so far: Infotype 8, field ANSAL should be annual salary.  This returns a 0.  I think that because