Report on Receipts&Disbursements on one screen for a Comp Cd.

Hi all,
i just have to see whether there is any standard report in SAP which pulls to shows all receipts and disbursements in one screen, if there is no standard report then they asked me to build a func spec to develop this kind of report.
so i am trying to find out with the SAP community here, whether we have any standard report on this or not. if no, then how to proceed on this func spec.
can anyone please put some light on this, i would be verymuch grateful.
Thankyou
Jay

Hi,
You can either use infosets or use constant selection.
For constant selection, check the blog below:
/people/prakash.darji/blog/2006/09/19/the-hidden-secret-of-constant-selection
-Vikram

Similar Messages

Report 2 show all receipts&disbursements in one screen 4 intercompany&Trade

Hi all,
i just have to see whether there is any standard report in SAP which pulls to shows all receipts and disbursements in one screen for intercompany and trade, if there is no standard report then they asked me to build a func spec to develop this kind of report.
so i am trying to find out with the SAP community here, whether we have any standard report on this or not. if no, then how to proceed on this func spec.
can anyone please put some light on this, i would be verymuch grateful.
Thankyou
Jay

Refer the following:
REPORT ZTEST12.
* Type declarations.....................
TYPES pict_line(256) TYPE c.
* data declarations......................
DATA :init,
      container TYPE REF TO cl_gui_custom_container,
      editor    TYPE REF TO cl_gui_textedit,
      picture   TYPE REF TO cl_gui_picture,
      pict_tab TYPE TABLE OF pict_line,
      url(255) TYPE c.
CALL SCREEN 100.
* Dialog modules......................................
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN100'.
IF init is initial.
    init = 'X'.
    CREATE OBJECT:
           container EXPORTING container_name = 'PICTURE_CONTAINER',
           picture    EXPORTING parent = container.
ENDIF.
IMPORT pict_tab = pict_tab FROM DATABASE abtree(pi) ID 'ENJOY'.
CALL FUNCTION 'DP_CREATE_URL'
       EXPORTING
            type    = 'IMAGE'
            subtype = 'GIF'
       TABLES
            data    = pict_tab
       CHANGING
            url     = url.
CALL METHOD picture->load_picture_from_url EXPORTING url = url.
CALL METHOD picture->set_display_mode
       EXPORTING display_mode = picture->display_mode_fit_center.
ENDMODULE.
MODULE cancel INPUT.
LEAVE TO SCREEN 0.
ENDMODULE.

Allowing evenly spaced double windows on one screen for quikc referencing?

Hi,
I can’t believe I am asking this but on Windows if you drag the window to the far right or far left it reduces the viewed window to have the screen allowing you to do the same but on the opposite side. This is really good when I am studying and need to keep looking for info on the two separate windows. It saves me from forever having to click on the window I want to view and then click back. Is there an Apple script or something that does the same so I can have the same functionality in my MacBook Pro?
Thanks
Matt

I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
In the Xorg log, the differences are:
without 'nouveau.noaccel=1'
[ 30.761] (II) UnloadModule: "nv"
[ 30.761] (II) Unloading nv
[ 30.761] (--) Depth 24 pixmap format is 32 bpp
[ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
[ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.777] (II) EXA(0): Driver registered support for the following operations:
[ 30.777] (II) Solid
[ 30.777] (II) Copy
[ 30.777] (II) Composite (RENDER acceleration)
[ 30.777] (II) UploadToScreen
[ 30.777] (II) DownloadFromScreen
[ 30.777] (==) NOUVEAU(0): Backing store disabled
[ 30.777] (==) NOUVEAU(0): Silken mouse enabled
with 'nouveau.noaccel=1'
[ 1191.621] (II) UnloadModule: "nv"
[ 1191.621] (II) Unloading nv
[ 1191.621] (--) Depth 24 pixmap format is 32 bpp
[ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
[ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 1191.621] (==) NOUVEAU(0): Backing store disabled
[ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
[ 1191.621] (==) NOUVEAU(0): DPMS enabled
So now 3D acceleration is disabled.
I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
Last edited by berbae (2013-03-27 10:07:42)

One ibot for multiple reports (or all reports in one topic/folder)

Hello,
Is it possbile to set the ibot for report caching to consider a whole bunch of reports rather than setting
up one ibot for every single report?
Regards,
metalray

Hello ADB,
Thanks for that. I wonder how to prove that the caching worked or that is has been done.
I noticed the .TBL files in the cache directory but that does not tell me much. Using OBI Administration and looking at the cache on the physical layer
did not help me either understand how all reports in my dashboard are now cached by running the ibot at midnight.
Out of the BI Answers, Delivers and Dashboards manual:
"NOTE: The Oracle BI Server maintains its own cache. This cache is separate from the Oracle BI
Presentation Services cache.
When you select a specific dashboard or request, Oracle BI Presentation Services checks its cache
to determine if the identical results have recently been requested. If so, Oracle BI Presentation
Services returns the most recent results, thereby avoiding unnecessary processing by the Oracle BI
Server and the back-end database. If not, the request is issued to the Oracle BI Server for
processing."
So basically I want to know how I can see that BI Presentations Services has
really cached the reports in my dashboard i.e. if my ibot works
Thanks,
metalray

Not getting BI query variable selection screen for few test users

Hi,
i am having problem when i am executing the reports. i am not getting variable screen for the test users ID's. but i am getting the screen when when 0BI_ALL authorization selected.
i want role based authorization, and not complete authorization.
the parameters in su01 are scl(X) and wlc(X X XX X)
Thanks,

Can you please check into Infoobject Maintenance screen in Bex Tab i.e. Query Execution Filter Value Selection. assign "Values from Masterdata Table".
Try again and let me know.
Nagesh Ganisetti.

Report is executing more than one hour

Hi All,
I have an issue with my report,its taking more than one hour for execution.
This report is called through an package,in package there are cursors which retrive data and sends to mail.The problem is with this select statement in cursor,its taking a lot of time to retrive the data.
In my cursor select statement i am using the following tables
HZ_PARTY_SITES HPS,
HZ_CUST_ACCOUNTS CUST,
HZ_CUST_ACCT_SITES_ALL HCASA,
HZ_CUST_SITE_USES_ALL HCSUA,
HZ_LOCATIONS HL,
OE_ORDER_HEADERS_ALL OOH,
OE_TRANSACTION_TYPES_TL OT,
OE_AUDIT_ATTR_DESC_V AADV
when i use OE_AUDIT_ATTR_DESC_V ,its taking a lot of time to retrive.So any one can help me out in this issue,how to add this view to other tables
Regards,
RR

RR,
Before you add any indexes to the listed tables, check with Oracle support to ensure you will be violating your Oracle Enterprise Business Suite agreement. Oracle has specific rules on modifying EMS tables. Additionally, any EBS patch or update that gets applied will likely drop any custom changes to these tables. It might be better for you to open a Service Request with Oracle Support and have them tell you how to improve the performance of your query since all of your tables are EBS tables.
Craig...
Message was edited by:
CraigB
RR, you may also want to check with your DBA(s) to see when the Statistics were last gathered on these tables.

How do I back up just one screen?

Seems I always have to get back to HOME and start fresh. How can I move back just ONE SCREEN for any application within iPhone?
Thanks in advance.

Look at the top left corner of the app screen. Is there an option to go back to the previous screen?
Give me an example of an app where this happens.

Configure MM in one screen

Good morning,
My user want to have only one screen in material master, and
they don't want program mm01 (material master) always start with
tab page. Is it possible to configure like this ? Does anybody can help and
advice me ?
Thanks
Robert,

Hi,
When you say tab page do you mean the list of views?
If so, you can bypass this screen by using the setttings (select all views and set the flag on the "view selection only on request"
the next time you start MM01 it will bypass the screen and all views will be selected.
As for having only one screen for the whole material master this is possible but not really feasible or recommended. There are simply too many fields and they often relate to different levels in the organisation (Plant, storage location, sales org etc.).
Steve B
Steve B

How to get One Selection Screen for all queries?

Hi Experts,
I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
I think there should be some way of getting it done.
Waiting for your inputs,
With kind regards,
Shreeem

Hi
If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
Hope this helps,
Aparna Duvvuri

How to add user command to drop down list in output screen for OALV Report

Hi Experts,
I have created a report by using OALV.
in Output screen i have added drop down for one filed with 2 values.
when i select value from the drop down list the program should trigger and the next field should be update.
so it is possiable to add a user command for the drop down list in output screen.
if so please help me .
Regards,
Rathan

HI,
Check the Demo program BCALV_EDIT_06 with having the DATA_CHANGED event still you can capture the changed data. This event will help you.
or you can go for this code..
data: it_f4 type lvc_t_f4,
        wa_f4 type lvc_s_f4.
        wa_f4-FIELDNAME = 'CONNID'.
        wa_f4-REGISTER = 'X'.
        wa_f4-GETBEFORE = 'X'.
        wa_f4-CHNGEAFTER = 'X'.
        append wa_f4 to it_f4.
"register F4 event
CALL METHOD g_alv_grid_ref->register_f4_for_fields
    EXPORTING
      it_f4 = it_f4.
"Once you try to pick the value HANDLE_DATA_CHANGED event will be triggered
"Definition
     methods:
     handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid
                              IMPORTING er_data_changed e_onf4 e_onf4_before e_onf4_after,
"Implementation
METHOD handle_data_changed .
    DATA: ls_mod_cells TYPE lvc_s_modi.
    IF e_onf4_before = 'X'.
      MESSAGE 'Data changed before F4' TYPE 'I'.
    ENDIF.
    IF e_onf4 = 'X'.   "if event triggered by F4
      MESSAGE 'Data changed on F4' TYPE 'I'.
    ENDIF.
    IF e_onf4_after = 'X'.
      MESSAGE 'Data changed after F4' TYPE 'I'.
    ENDIF.
   "here you know which cell was modified
    LOOP AT er_data_changed->mt_mod_cells INTO ls_mod_cells.
     "just example test case, here you can implement your code for modified cells
      IF ls_mod_cells-value >=5.
        CALL METHOD er_data_changed->add_protocol_entry
          EXPORTING
            i_msgid     = 'SABAPDOCU'
            i_msgty     = 'E'
            i_msgno     = '888'
            i_msgv1     = 'Only numbers below 5 are possibe'
            i_msgv2     = 'Please correct'
            i_fieldname = ls_mod_cells-fieldname
            i_row_id    = ls_mod_cells-row_id.
        CALL METHOD er_data_changed->modify_cell
          EXPORTING
            i_fieldname = ls_mod_cells-fieldname
            i_row_id    = ls_mod_cells-row_id
            i_value     = space.
      ENDIF.
    ENDLOOP.
ENDMETHOD.                    "handle_data_changed
Edited by: sum_it2 on Nov 21, 2011 10:07 AM

There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.

There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.

A good read. Have you done anything at all to resolve your problem. Reset? Restore?
By the way - "your products"... nobody here produced the iPhone, we are all just users. Apple is not here.

Can I use my old iMac as a second screen for my new one?

I have an old iMac (about 4-5 years) that I don't use anymore and a new iMac that I just bought a few months ago.
Can I us my old iMac as a second display for my new one? Its a slow computer now, but the screen is nice and big so it would be nice to be able to keep using it like that.
If yes, what cord(s) would I need to make this happen?
If no, is there any disadvantage to using a non-mac screen for a second display? (I'm a graphic designer, so little things like having the color exact on each screen are very important)
Thanks for the help!

Is there any way to do it without lag? Right now it works, but its really annoying to have things so slow on the other screen.
Is there any way to hook them up so they work like an actual dual monitor setup (wired connection with no lag)?

I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?

I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
If you have two displays attached, then the function to change from mirrored to extended Desktop will appear in System Prefs/Displays.

Can I run 2 monitor with one of the monitor having Full Screen for Elgato Eye TV?

My mac mini has Elgato 'Eye TV' software that runs in 'Full Screen'. I want to keep this setting & also connect another monitor to the macmini & use other Appilications on the other monitor? Can I run 2 monitor with one of the monitor having Full Screen for Elgato Eye TV?
My early 2009 macmini can run Mac OS 10.5, 10.6, 10.7 & 10.8

Yes, run one from HDMI and the other from Thunderbolt/minidisplayport sockets. In EyeTV Preferences check the screen you want for full screen use and make sure your Dock is on the other one.

Block Purchaisng screen for one time vendor acount group

Hi Experts,
Hope everyone is doing good.
How can we block purchasing screen for one time Vendor account group.
User requirement:
He wanted to maintain only Accounting data for one time vendor but not purchasing data.Though I have suppressed all the Purchasing related fields in Screen layout for Vendor account group but still at the time of creation of one time vendor "create Vendor:purchasing screen is coming"
Is there any option to suppress/Skip this screen "Create Vendor:Purchasing Data" ?
Regards,
Uzair

- Account group is just one of the four factors influencing the field status. (If all the fields are suppressed in a screen the screen will not appear during the creation of the VMR).
- Company Code, Transaction Used and Purchasing Organization are otehr influencing factors.
- Since the field status depend on several influencing factors, Link rules are necessary which determine the instance of the field status if different influencing factors have different effects.
- Hide has priority 1, Display 2, Mandatory 3, Optional entry 4
- Say for e.g. you want a field to be suppresses due to account group but a mandatory entry due to purchasing organization. Instance hide has the highest priority. If a field was suppresses by account group what was specified by purchasing organization becomes irrelevant.
- Display overrides Required & Optional Entry
- Required entry overrides Optional entry

Report on Receipts&Disbursements on one screen for a Comp Cd.

Similar Messages

Maybe you are looking for