Report only completion with Send E-mail button

We would like to set up a new Captivate course with the
purpose of familiarizing employees with a new system. Although we
may include some questions for review and reinforcement, we only
want to report that the learners have COMPLETED the course (by
using the "Send E-mail" button) -- we do NOT want to report the
score to the course administrator.
On the Preferences>Quiz>Reporting window, I've made
these selections:
- Enable reporting for this project
- E-mail
- Complete/Incomplete
- Slide views only
- Score (although I'd prefer to leave this blank, but that's
not an option)
- Report Score (this also I'd prefer to leave blank)
I'd actually prefer to leave those last two options blank,
because I don't want to report any "score" information; however,
I'm forced to select:
= either Score or Percent
= and either Report score or Interactions and score
(I am using Captivate 3)
Thank you for any insights or tips!
Jan

Rick,
Thanks for your thoughts. I'm wondering -- if I remove
reporting and place the plain email option at the end of the
course, do we run the risk of some learners skipping to the end of
the course and sending the email, even though they may not have
worked through the whole course?
I've discovered that a course developer can edit the score
page (by de-selecting all of the options) so that it actually shows
nothing to the learner. This would mean that the learner would not
need to worry about a score. And I could place a text box on that
page telling the learner to click the Send E-mail button. Yet still
there's the issue of the course adminstrator receiving the score in
the email, when I just wanted her to receive the "completed"
report.
So, are you thinking that there's not a way to remove the
score results from the email that goes to the course administrator?
Actually, that's what I'm suspecting at this point, but perhaps
someone has discovered a method. And if not, I could work around
it, or perhaps the course administrator would be OK with the scores
-- she could just ignore them if she didn't need them.
I'm still just exploring various options. If you have anymore
thoughts, thanks.
--Jan

Similar Messages

  • Problem with send e-mail

    Hello,
    I have a problem with send e-mail.
    When I create a new message, the e-mail is send for customer and me, but the description of message dont send with e-mail.
    I have created a Smartform that send this e-mail and your context there is information for send this information.
    When I do a modification in this message, when i put a new description, a description preview is send, but a new description dont send.
    Can anyboby help me.
    Thanks a lot.

    Hi,
    I already have created a development, but this found the description preview and not actual in run time.
    Development:
    read table gt_notif_type_text into gs_notif_type_text
    with  key type_text = gs_notif_text-type_text.
    if sy-subrc <> 0.
    clear gs_notif_type_text.
    endif.
    read table gt_notif_type_textt into gs_notif_type_textt
    with  key type_text = gs_notif_text-type_text.
    if sy-subrc <> 0.
    clear gs_notif_type_textt.
    endif.
    In the Smartform on acording abouve:
    &gs_notif_type_textt-stxt()& &gs_notif_text-last_usr()& &gv_notif_textdate& &gv_notif_texttime&
    Thanks.

  • Mail created with "Send to Mail Recipient" disappear and are not sent

    I have a small setup with a SBS 2011 server (Exchange 2010) 10 users with Windows 8.1 and Outlook 2013.
    One user is trying to send mails with attachments to his college´s
     but they are never send, are not shown in sent items and can not be found on the server.
    The user right click on a PDF file and press "Send to Mail Recipient" Outlook opens his mail is entered into the receiver (internal receiver) and press send. The mail do not show up and as mentioned even in sent items.
      I then try to do the same but send through the address book in Outlook / Exchange and these messages appears as they should.
    One week later, the disappeared mails suddenly appears in the college’s mailboxes and it turns out there are some mails to external addresses as well, which were not sent until a week. All messages are now in sent mail but they have not
    appeared anywhere else before.
    I did some tests with the "send to" function which also had the mails disappearing - those mails has not turned up until now. (a week ago)
    Now the user (AND all colleagues)  are very nervous that something is wrong with their system and the mail does not arrive.
    It is only 1 user this has affected but he is responsible for the majority of sales in this company and they are very afraid that they are not responding correctly to large customers.
    Is there anyone who can help with debugging in such a case?
    I have tried repairing Outlook, started in safe mode, checked the mail server for hanging mails but nothing shows any errors.
    Thanks in advance.
    Michael Grøn
    Michael Gron

    Hi,
    Have the user logon OWA and send the attachment, will this issue persist?
    Please also confirm if the issue exists when inserting an attachment when composing a new email isntead of using the "Send to Mail Recipient" function.
    Since only one user has been affected, use MFCMAPI to find if the message is stuck in the user's mailbox:
    https://mfcmapi.codeplex.com/releases/view/118446
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • V$rman_status report on : COMPLETED WITH ERRORS

    Hi,
    quering v$rman_status on 10204 instance shows :
    select sid,recid,command_id,operation,status,start_time,end_time
    from v$rman_status 
    where recid=16360
    SID      RECID COMMAND_ID           OPERATION  STATUS                  START_TIM END_TIME
       0      16360 2012-05-07T15:54:18  RMAN       COMPLETED WITH ERRORS   07-MAY-12 07-MAY-12What was the reason of the failure ?
    I follwed : http://docs.oracle.com/cd/E11882_01/backup.112/e10643/rcviews050.htm
    COMPLETED WITH ERRORS - Job completed successfully, but there were some errors which were overcome using failover features. For example, RESTORE FAILOVER or BACKUP FAILOVER was used to schedule the job on another channel.The first failure : 16360 took 4 hours to complete . rman backedup : 1.3 Tera
    And then it was automatically restarted :16366 for another 4 hourse . rman backedup once again : 1.3 Tera
    1)Why it didnt backuped only the fixs for errors in previous backup ?
    2) What was the error in the first time ? Where i can found the reason for the failure so i can try to fix it by myself before the next backup begin ?
    select
    SESSION_KEY, INPUT_TYPE, STATUS,
    to_char(START_TIME,'dd/mm/yy hh24:mi') start_time,
    to_char(END_TIME,'dd/mm/yy hh24:mi') end_time,
    round((end_time-start_time)*1440,2) "Minutes"
    from V$RMAN_BACKUP_JOB_DETAILS
    where  input_type='DB INCR'
    order by session_key desc
    16366     DB INCR     COMPLETED                     07/05/12 20:00     08/05/12 00:06     245.82
    16360     DB INCR     COMPLETED WITH ERRORS     07/05/12 15:54     07/05/12 19:59     244.37

    -check rman log file to get complete detail on this warning message.
    -if log not present then take help from v$rman_output view,its available in 10g version onwards.
    select * from v$rman_output where session_recid=16360 ;

  • Submitting Customized Report Request, Completed with Error Status

    Dear All ,
    Good Day ,,
    1- I am using Oracle Application 11.5.0
    2- Application And Data Base Server Unix AI
    3- created Oracle Report file (i testes all sql statmets using toad , successfly)
    5- Tested the report , passed parameters , it is running successfully .
    6- Cpied the reports to the next path (E:\oracle\testappl\per\11.5.0\reports\US)
    7- Created Executable file (has the same name of the rdf file)
    8- Created Concurrent program contains the same Executable file and the output format is 'PDF', Style = 'Landscape' , printer = 'noprint' , the added the parameters (the same named in the rdf file)
    9- Added the Concurrent program to the HRMS 'Reports & Process'
    10- From the HRMS Manager Responsibility , i submitted the request , passed the parameters .
    11- Refresh , Pending , Runing , phase 'Completed' , Status 'Error'
    12-View Log .. :
    Human Resources: Version : 11.5.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    KU_PAYSLIB module: KU_PAYSLIB
    Current system time is 31-MAR-2010 23:29:55
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    TIME_PERIOD_ID='442'
    ORGANIZATION_ID='1424'
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.AR8MSWIN1256
    stat_low = 84
    stat_high = 0
    emsg:was terminated by signal 4
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Program was terminated by signal 4
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3192426.
    Review your concurrent request log and/or report output file for more detailed information.
    Executing request completion options...
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 31-MAR-2010 23:29:56
    12-When i change the output format to XML it completes with 'Normal Status' but , the next Log is appearing :
    Human Resources: Version : 11.5.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    KU_PAYSLIB module: KU_PAYSLIB
    Current system time is 31-MAR-2010 23:36:19
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    TIME_PERIOD_ID='442'
    ORGANIZATION_ID='1424'
    Environment will now switch to UTF-8 code-set.
    Parts of this log file may not display correctly
    as a result. This is an expected behavior.
    XML_REPORTS_XENVIRONMENT is :
    /apps/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    XENVIRONMENT is set to /apps/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    REP-3000: Internal error starting Oracle Toolkit.
    Report Builder: Release 6.0.8.28.0 - Production on Wed Mar 31 23:36:20 2010
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Enter Username:
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PRINT   -------------
    Printing output file.
    Request ID : 3192428      
    Number of copies : 0      
    Printer : noprint
    Finished executing request completion options.
    Concurrent request completed successfully
    Current system time is 31-MAR-2010 23:36:21
    Thanks A lot

    >
    emsg:was terminated by signal 4
    >
    For this issue , pl see the solutions in this related thread - Re: The Concurrent Manager and Programs is failing random
    >
    REP-3000: Internal error starting Oracle Toolkit.
    >
    This typically indicates that an X server is not running on the Unix server. Pl see these MOS Docs
    200474.1 - Comprehensive REP-3000 Troubleshooting and Overview Guide
    207532.1 - Troubleshooting Tips for REP-3000 Error when Running PDF/POSTSCRIPT/HTML Reports
    Searching on this topic in these forums will also retrieve many hits.
    HTH
    Srini

  • Airport extreme will only get or send e-mail messages, or allow Safari to function for about 5 minutes.  After that it doesn't respond even though the green light is on and diagnostics says there is nothing wrong. Have to unplug again to get a response.

    For the past 2 days Airport Extreme works for about 5 minutes and then will not receive or send e-mail messages, or let Safari work.  The only way I can send or receive is to unplug Airport Extreme for a few seconds, reconnect and then work frantically for 5 minutes before it does the same thing.  The green light stays on and the diagnostics tells me nothing is wrong even though no mail is moving.
    Any ideas?
    Thanks,
    Greg
    (I plugged my laptop directly into the modem in order to send this message.)

    For the past 2 days Airport Extreme works for about 5 minutes and then will not receive or send e-mail messages, or let Safari work.  The only way I can send or receive is to unplug Airport Extreme for a few seconds, reconnect and then work frantically for 5 minutes before it does the same thing.  The green light stays on and the diagnostics tells me nothing is wrong even though no mail is moving.
    Any ideas?
    Thanks,
    Greg
    (I plugged my laptop directly into the modem in order to send this message.)

  • Problems with sending e-mails on I-Mac.

    I have a problem sending e-mails on my I-Mac and have been told to delete my e-mail account and start again. However I have also been told that if I do this I could loose all e-mails associated to my account. Could you advise on this please.

    OS X Mail: Troubleshooting sending and receiving email messages

  • TS3899 My iPhone 4S will only recieve or send e mail when I'm in a wifi spot?

    My iPhone 4S only receives or send email when I'm in a wifi spot

    Did you already check if "Cellular Data" is activated in Settings/Cellular?
    Also explained in this article:
    iPhone and iPad (Cellular Models): Understanding cellular data settings and usage
    When cellular data is off, all data services use only Wi-Fi, including email, web browsing, push notifications, and other services. If cellular data is on, carrier charges may apply. For example, using certain features and services that transfer data, such as Siri and Messages, could result in charges to your data plan.
    Message was edited by: Ingo2711

  • How do I mute iPad 2 completely with a one touch button?

    I have switched to mute on 1. The physical mute switch, apparently only for notifications 2. The up, down volume button, pressing and holding the down button.
    Thinking that it's on mute, I clicked on a video clip during a meeting and Lo and behold, the clip played with sound! WTH! later I double clicked on the home button and the vol there was not on mute! Is my unit faulty?? And is there anyway I can fix a one step button to COMPLETELY mute my iPad 2? Don't want to check 3 steps just to make it mute.

    I am begging Apple to allow an additional audio setting for Mute All Audio Unconditionally. In my line of classical music work, I absolutely cannot be worrying about accidental music outbursts or alert sounds. I shouldn't have to use a dummy plug. Volume Off should simply mean Volume Off; I can't imagine any other audio device in the history of music playback equipment not working like this.

  • Problems with sending e-mail

    I can't get messages to post and get the following message upon pressing "send":
    This message could not be delivered and will remain in your Outbox until it can be delivered.
    The sender address was rejected by the server
    I'm receiving mail fine and access to the internet is not a problem either.
    Any suggestions?

    Same problem here - BT "Upgraded the Local Area System" in January and since then, I'm unable to send any emails with an attachment larger than 2Mb. I have a number of different accounts and they all worked until January. I spoke to the Mac desk at BT and they advised me that the ONLY way for me to now send emails from my home was by registering any non-BT accounts on the BT Yahoo site. He walked me through this and it worked however ...
    Although all three Macs fail, the only PC we have will send any size attachment from any of 8 accounts. When I put this to the BT guy, he said he didn't know anything about that, but if I didn't register all my accounts on Bt Yahoo, all SMTP mail would fail.
    On the example set-up that he showed me, he changed a non-BT SMTP server address in Mail to smtp.btinternet.com
    This can't be right because I sync my iPhone to my Mac and this means that all my email settings on the iPhone will be useless out of the house.
    Please get on the case Apple and if you need conclusive testing, ask me. Three Macs, 1 PC, 8 email addresses and another BT mess.

  • Problems with sending in Mail

    Three days ago our Intel iMac and two other Intel Mac Pros have developed a problem when sending an email in Mail. All of the Mail settings have been checked by our ISP and are correct. The computers are running Leopard OS. When sending the email you hit the send button and the mail activity indicator goes across as normal. When the blue line is right across it just hangs and does not clear and eventually a drop down window asks you to "try with selected server".
    This problem started after a security update.
    We are also having problems when trying to log onto any secure password protected website. None of the computers will log on.
    It might also be useful to know is that we also have a MacBookPro which is running Snow Leopard (and is also on the same network as the other computers) and Mail and logging onto secure websites are (thankfully) working fine.
    We have spoken to our computer supplier and their support team have tried various option like seeing if "keychains" etc are okay but they are at a loss as to what the problem is.
    We have also got our ISP looking into it too but they have not come back as yet.
    Has anyone got any ideas?

    Each of these two particular accounts should have its own outgoing mail server selected in the Mail > Preferences > Accounts > Account Information > Outgoing Mail Server (SMTP): popup list. This is to ensure that messages sent from each of these accounts use that account's outgoing server, necessary because these providers do not allow other accounts/user names to use their servers to send messages.

  • Problems with sending POP mail since new "Security Update"

    Hi, I seem to be having problems sending mail from POP account - and it started after the latest Security Update that I recently downloaded. From memory it was 110Mb file.
    My ISP and POP account service both say it is nothing to do with them.
    Any ideas?
    This is on my MacBook Pro running 10.4.11

    Hi, and a warm welcome to the forums!
    Use Disk Utility to verify/Repair the HD, then Repair Permissions then reboot, if the problems persist try reinstalling the update...
    http://www.apple.com/support/downloads/

  • Receive incoming Mail only  when i tap the Mail button..

    not as they arrive. Is it possible to be notified when they arrive? does it have something to do with my Fetch settings?
    Settings
    Fetch New Data Push ON
    Fetch schedule Manually
    Advanced gmail Fetch, Fetch is selected
    under Sounds, Ring
    Vibrate ON
    Ringtone Marimba
    New Mail ON

    Yes, you need to change your settings. Gmail does NOT support Push email (only MobileMe, Yahoo, and MS Exchange servers do). You should to set Push to OFF (unless you also have one of the Push-capable accounts) and set an interval for Fetch (15 min, 30 min, etc., NOT manual). Since Push is not supported by your mail account, Fetch is used, and you have Fetch set to Manual, meaning mail is only checked when you launch the Mail app.

  • Oracle XML report is Completed with Warning.

    Hi ALL,
    Im trying to view the Reconciliation Report request in excel format but getting below error.Even i tried below workaround but no luck.
    Database:10.2.0.5.0
    Application :11.5.10.2
    OS : HPUX PA-RISC 11.31.(64-bit)
    Workaround,
    1.Cross verify the setup & parameters.
    2.check the space on all servers.
    3.Bounce the concurrent manager.
    4.Bounce the Output post processer.
    5.copy the FNDWRR.exe from OA_HTML to FND_TOP/bin
    6.Recreated the FNDWRR.exe
    Problem Description
    Request log Error :
    Beginning post-processing of request 31862198 on node RXQ20HXA at 24-AUG-2012 00:41:40.
    Post-processing of request 31862198 failed at 24-AUG-2012 00:41:41 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    Opp log Error:
    Output type: EXCEL
    [8/24/12 12:41:42 AM] [UNEXPECTED] [332648:RT31862198] oracle.apps.xdo.XDOException: Invalid input combination.
    at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:995)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5926)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3458)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3547)
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:290)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)

    This particular failure in the ITS generally crops up because you have disabled or end-dated some customer-related data between order entry and shipping. Look in particular at the salesrep and any customer items on your order(s) to ensure this doesn't apply.
    Another possibility is that you have a tablespace issue - try working through the following notes on MOS:
    API Interface_header_to_OM Failed During Interface Trip Stop [ID 276580.1]
    Interface Trip Stop Warning : Failed To Interface Header To Order Management Because API Interface_header_to_OM failed [ID 178272.1]
    Interface Trip Stop : Failed To Interface Header To Om Because Api Interface_header_to_om Faile [ID 1111723.1]

  • Cannot press SEND / NEW MAIL button in MS Outlook Web Access

    I am completely upset after updating the iphone os 4.1 because i cannot simply send email using the MS outlook web access. FYI I can still view the email but cannot send. my company doesnt allow me to use the POP (similar to yahoo) for security reason and hence i must need to use the webmail (via internet).
    moreover, my wife just bought another one which is still under 4.01 but her phone can do. what's the problem? can i convert back to 4.01 or my phone has problem? pls help. thanks!

    Solution (found by searching forum for "Safari Crashes"):
    Settings > Safari > Autofill > Names & Passwords "Set to OFF".
    Then choose "Continue" the next time. You've lost your password fill-in but at least you can log in.

Maybe you are looking for