Report or  tab;le

dear All ,
I required the material code & the net wt which we enter in the BOm for a list of materials .
Pl guide with Table name or Report

Hi,
By developing a small query through the T-code SQVI, you can join the table MAKT-MATNR and MARA-NTGEW. By joining the table and the above said fields you can get the report.
Tables need to join: MAKT & MARA.
fields: MATNR & NTGEW.
Regards,
V. Suresh

Similar Messages

  • EAM Controller is not able to see FFLOGs in Reports & analytics tab

    Hello Team,
    We have recently configured GRC 10.1. Currently we are testing the configuration and We have observed that EAM Controller is not able to see FFLOGs in Reports & analytics tab but  administrater is able to view the logs.
    Has anyone faced thiss issue earlier.  Please help me to get it resolved.
    Thanks,
    VIJEI

    Hi Ameet,
    Thanks for quick reply.
    I have assigned the custom roles of below SAP standard roles to EAM Controler ID
    SAP_GRAC_BASE
    SAP_GRAC_NWBC
    SAP_GRAC_SUPER_USER_MGMT_CNTLR
    SAP_GRC_FN_BASE
    SAP_GRC_FN_BUSINESS_USER
    Please let me know do i need to add any other roles or add Auth object to the roles.
    Thanks,
    Vijei

  • Error when selecting the Report Center tab of the Issues web DB

    I started a DB from the Issues web DB template. Everything worked fine when I shutdown last night, but this morning I started receiving the following error when selecting the Report Center tab.
    You must specify an object for the BrowseTo to open. I have noticed that the ReportCenterDefault form no longer displays. How do I correct this?

    Hi Ben
    Wyer,
    Have you resolved
    your problem yet, and does the suggestion help you? If you still have any concern on the thread, feel free to follow up.
    Best Regards,
    Bruce Song [MSFT]
    MSDN Community Support | Feedback to us
    Get or Request Code Sample from Microsoft
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Visual Studio report with tabs (Worksheets in Excel) broken up by a specific field?

    I am fairly experience with SQL, but am somewhat new to using Microsoft Visual Studio. However, it is very similar to other SQL programs I have used a lot before. I have Visual Studio 2008.
    For my company, I use Visual Studio in creating BIDS reports that are then uploaded to our Learning Management System (LMS). You can then run the reports within our LMS, and also export them to Excel.
    What I am trying to figure out is if you can set the report to create separate tabs (worksheets), broken up at a certain field, when exported to Excel.
    For example, say I have a report that displays all people and the trainings they have overdue. Say I want it to create a separate tab for every department. For example, one tab would say "Finance" and would be all the Finance people and the trainings
    they have overdue. One tab would say "HR" and would be all the HR people and the trainings they have overdue.
    The main report is already created, but currently just lists all data, sorted by department. It does have parameters so you can narrow it down to just a certain course or set of courses, just a certain department, etc. Does anybody know if this is possible?

    I apologize for not replying sooner. Thank you so much for your help. It looks like this will solve my problem. Unfortunately, I have not yet been able to re-visit this, as I have lately been pulled into a number of high priority tasks, causing the
    need for this to be pushed back. I will re-visit this again when I have a moment and give this a try. Thank you.

  • Report Preview Tab and data loading

    I have 2 questions:
    When I first started developing a report, when I opened the file I had both the design and preview tabs displayed. It seems after I downloaded and viewed 1 of the sample reports, the preview tab disappeared (tho, it's not obvious the 2 are related). I checked the box under Options/Layout/Display Preview Panel, but it did not seem to help. Is there something else I missed?
    The other question, and this may have an effect on my 1st question, is that when I open my report file, the database records are not automatically loaded (thus, nothing to preview at that point). Is there a way to set an automatic log on to the database so that the load time happens at the beginning and not when I actually want to preview results?
    Thanks in advance....Steph

    Don,
    Thanks for the response. I tried what you suggested and it does not seem to work all the time. There may be something else that I need to consider.
    I was wondering...when I do the "Save Data with Report", does it save ONLY the data? Or does it save some intelligent connection back to the database?  Also, is this function the same as the one listed under Options/Reporting? I selected the one on the File menu (as you suggest), but it doesn't seem to change the selection on the Options/Reporting window.
    Apologies for my attempt at a "2-fer-1". I only did that because I believed the 2 might be related...maybe not. I'll repost as a separate issue/concern.
      Cheers...Steph

  • Crystal Report Cross Tab Report

    In crystal report 2008, i created a cross tab report. Column shows sales order number and rows show item number.
    For columns that shows sales order #, I also wanted to show sales person name field right beside it. In cross tab expert, I added the field salesperson name.
    However, crystal cross tab shows the sales person at a separate column with duplicate information. I only want to show sales order no. with sales person name under one column. Is there a way to achieve this? Thanks.

    This would be a hard job.
    Have you tried Pivot Table function in Excel? You can play with it and get some ideas.
    Thanks,
    Gordon

  • Can you customize report "page" tabs so they are named automatically from data in the file, and can you add "pages" dynamically?

    I am looking to develop a dynamic report template for our internal reporting use.  Namely, I am looking for the ability to do two things:
    1)  Update the names of the tabs at the bottom of the report template (lets call them the "pages" of the report) from data stored within the file (for instance, label a tab with the "description" property from a given group or channel)
    2)  Add additional tabs with associated graphs based on the number of groups a particular file has (for instance, a particular component could have a test life of 2000 hrs, but have been put through several different tests along the way.  It would be nice to show an overall life summary on the first tab, and then break out the data from the individual tests on seperate tabs with labels specific to that test, such as test #, etc.)
    Any ideas on how this may (or may not) be done?

    Hi SethRow187,
    Let's take this one step at a time, starting with the one REPORT sheet per Data Portal Group request.  This is something that I do all the time, and I have developed lots of standard functions that I can re-use quickly and easily.  DIAdem has the basic functions which enable this, but it takes quite a few commands to get this to work the way you and I want with absolute control.
    In the "Group Sheets General" example I'm attaching below, the same REPORT layout TDR file is loaded once for each Data Portal Group, and then subsequently altered programmatically so that all the Group references in the REPORT objects (graphs, tables, text boxes) are replaced with references to the current Group.  This results in N REPORT sheets where each sheet has explicit references to a particular Group.
    In the "Group Sheets Simple" example I'm attaching below, again the same REPORT layout TDR file is loaded once for each Data Portal Group, but in this case no further change is made to each REPORT sheet after it is loaded.  This results in N REPORT sheets which are absolutely identical in content to each other and which all reference the default Group.  They appear different when refreshed because in each sheet, under its "Settings>>Layout Setup>>Worksheet Parameters" dialog there is a command configured to run each time the sheet is refreshed-- this command uses the current REPORT sheet index to set the corresponding Group to be the default Group.
    In both cases the name of the Group is used for the REPORT sheet, which is convenient in that both Group names and REPORT sheet names are required to be unique, but you could use the Group description or any other property instead as long as you ensure that it has not already been used to name a previous REPORT sheet.
    I also have scripts to concatenate the contents of N Groups into a new Group, located at the top of the Data Portal, and this combined with the below attached applications would give you the lead off overview REPORT sheet you mentioned.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments
    Attachments:
    Group Sheets Examples.zip ‏58 KB

  • How to hide the Main Report Viewer Tab in SAP CR for VS2010?

    Is there any option to hide that tab page? In designing progress, sometimes it's really annoying.
    Besides, the vertical line in report appears mistakes with a tiny over-length. How to deal with it?
    Looking forward to your answers. Thanks.

    Hi Jinu,
    1) Do some or all of those subreports span multiple pages?
    2) Do each of the Subreports start on a new page?
    If yes, for both, then here's what you need to do:
    1) Create a formula (@True) with this code:
    shared booleanvar SetStatus:= True
    2) Create another formula (@False) with this code:
    shared booleanvar SetStatus:= False
    Drag and drop the @True formula on the details sections for which you want the Page Footer to be suppressed.
    Similarly, drop the @False formula on the details sections for which you want the Page Footer to show up.
    Then, go to the Section Expert > Select Page Footer c > Click the formula button beside Suppress and use this code:
    shared booleanvar SetStatus;
    -Abhilash

  • Crystal report cross tab

    hi all
           i am new in this forum.  i have facing problem in cross tab report. in my project i'm using cross tab crystal report. i have removed record navigation option.so entire record will be displayed in one page, in this crystal reportviewer will split the records with help of page break. if  i got page break the heading will be display again and again for every page break.  i want to display heading only one time for all pages using Cross Tab report.  Anybody knows tell me the idea
    Thanks & Regards
    Aravinth K

    The above highlighting works in regular crystal report but not in cross tab report.
    I am wondering is there differnt procedure to work in cross tab? I noticed there's a highlighting expert function in corss tab menu...

  • Get names of global variables from report (like Tab "Globals" in debugger)

    Hello,
    is it possible to get a list from all available variables in a report at runtime like the tab "Globals" in the new debugger?
    The problem is that i don't know the names of the variables. So i could not do a dirty assign with field-symbols.
    best regards
    Marcel Gäbe

    Try RS_PROGRAM_INDEX
    table compo returns. filter with type = D
    Will you please check GET_GLOBAL_SYMBOLS & RS_PROGRAM_INDEX _SOURCE

  • Crystal Reports Cross-tab Sort?

    Hello,
    I am new to Crystal Reports and I canu2019t figure out how to sort a column on a cross-tab. 
    How can I sort in descending order the Total columns on a Cross-tab? E.g. will like to show the Product Names by the total amount of sales and not by alphabetical product name. 
    Rows: Product Name
    Columns: Region
    Summarized field: Total Sales  (this is the column I will like to have in descending order)
    If this cannot be done, what is the best way to solve this issue?
    Thanks!

    Hi Sorell,
    I tried this, I right clicked on the table border, and clicked group sort, For this group sort I choose All and selected the measure amount and descending. This sorted amount table by the total column for me based on the highest product revenue.
    Hope this helps
    Regards
    Alan

  • Crystal Reports Cross-Tab Report not showing all available fields

    I am running CR2008 against MS SQL Express.  I have several tables with fields and data in them and can create standard reports to show all the data in all the fields.  However, when I try to create a cross-tab report, only some of the fields appear for me to choose from.
    I created a standard report with all the fields I needed in my cross-tab report and ran a preview.  Everything was there.  I then added a cross-tab object, selected the tables only to find that fields that are in the main report are not showing up for selection in the cross-tab.

    UPDATE:  I exported the entire database from MS SQLExpress to MS Access and I am having the same issues, so it does not appear to be a problem with the database engine and, since the standard tabular reports show the fields, I am at a loss as to why they don't show up in the cross-tab or the Parameter fields.
    I am creating the cross-tab through the Cross-Tab wizard.  Is there maybe a bug in that?  Is there a way to create it otherwise?

  • Diadem REPORT Page tab feature

    I just wanted to point out an annoying bug/feature of Diadem 10.  not sure if it is older versions or not.  When there are more pages or worksheets in a REPORT than your screen is wide, the issue appears.  When you want to select a different page to view and the tab is split by the edge of the screen here is what happens.
    say I want to select the split page named Page 3, where Page 1 and 2 tabs are fully visible, but Page 4 and 5 are not shown at all.  I click on the split page tab for Page 3, the screen refreshes and the new Report Page is shown.  I expect Page 3, the one I clicked on, to be shown.  This is not the case.  Page 4 is actually shown and now Page 3 tab is fully visible and the Page 5 tab is split by the edge.
    The Report should not skip the page I selected to go to the next one, but should go to the actual page I clicked on. 
    Hope it get fixed in the next version or patch release as it is a slight annoyance.  BTW, would it be possible to program it to allow a drag and drop rearrangement feature for the tabs?  Okay, I will shut up now.  Thanks!

    Hello,
    following your description, I could understand what you mean. I found that you can prevent this effect by clicking on the very left of the respective tab. Maybe this helps you as a workaround.
    I will inform R&D about this issue but I cannot promise that a fix will make it into the next release.
    Concerning the reordering of the tabs, I will file a product suggestion.
    Thanks for the feedback.
    regards
    Ingo Schumacher
    Systems Engineer Sound&VibrationNational Instruments Germany

  • BAM report using Tab Group - is there a limit to the number of tabs?

    When building a BAM report using a Tab Group report view - is there a limit to the number of tabs that can be created?

    Hi Robert,
    Based on my test, the issue cannot reproduce in a simple report. Please modify the Variable with a new expression to check if the issue is persist.
    If the issue is persist, could you please send the .rdl file and the dataset with sample data to us by the following E-mail address.
    E-mail: [email protected]
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Changing the order of Report's tab drop down entries in plugin

    Please let me know how to change the order of reports drop down entries in plugins.
    I tried all the combinations of changing the order of REPORT_DEFINITIONS in emcli. But no hopes.
    Please help me.

    Better to post in Extensibility
    http://forums.oracle.com/forums/forum.jspa?forumID=219

Maybe you are looking for