Report Output In DOC or RTF

Hello All,
Is it possible to generate a report in Doc / (RTF)(Document) format, if so can you please help me.
Regards
Melvin

Hi Melvin,
You can use desformat=rtf in the command line to get an RTF output. To quote from documentation (Publishing Reports - Appendix A) available at
http://otn.oracle.com/docs/products/reports/content.html
"RTF Rich Text Format. This report output is sent to a file that can be read by word processors (such as MicrosoftWord). When you open the file in MS Word, you must choose View > Page Layout to view all the graphics and objects in your report."
Navneet

Similar Messages

Exporting Report Output to Doc, RTF or other

I have designed a few reports using Developer 2000 and I was wondering if if was possible to export the output of these reports to other file formats such as Word's Doc or RTF formats .... while the tool is powerfull it would be nice to let people use a friendly tool once in a while, or maybe email the output to a colleage ... is this possible and if so how do I go about it ?

If your report is a plain text report, you can definitely redirect the output of the report to doc or rtf. Just set the system parameter MODE to 'character' and then run the report with 'Destination Type = File' and 'Destination Name=<filename>.doc/.rtf'. Then open the output file using MS-word/wordpad. Hope this works....

BIP report output in PDF and RTF generating some blank columns or � symbols

Hi Experts,
I am new to BIP. I have developed some BIP reports in 10.1.3.4.1 version which are working fine in Dev and UAT environment.
But it's generating some blank columns and some columns with proper data and some columns with"cellphone" kind of symbol in PDF and " �"
symbols in RTF in Prod environment.
In all the environments the version of BIP is same.
So any help in resolving this issue is appreciated.
Thanks in advance..
Regards,
Suresh.A

All of the complex report logic is handled in your Oracle Report (rdf) file.
If your Oracle report is working OK, then this report should be generating XML.
After running your report, go to the View Requests window. Highlight your request, and click the Diagnostics button. Then click the 'View XML' button. If you see XML data, then you should be OK.
When I faced a similar issue, it was because the '1 step' process didnt work for the particular report I was using. The '1 step' process doesn't work for every report. Which report are you using?
If the report is submitted via a form (not the concurrent manager request form), then you probably need to use 2 steps to produce the desired output.
For more information, see the following thread:
Enhancment to avoid 2 step check printing
HTH,
Mark K

Webi Report Output using dynamic Filter

Suppose my report output contains doc. number & document date which shows data of one year which filter is applied on global level means at query filters level.
Now I want to show output of only last 3 months from current date(report run date) on the basis of document date.
So how to proceed further in such scenario.
Please reply ASAP.
Thanks
Pradip

You can filter it on the report level or the block level. Highlight either one and then add the filter (make sure the filter window is open).
Thanks

Not able to save report output in a text file and RTF file

I am using Oracle Developer6.0 . I am facing problem with reports. I am invoking reports from form using run_product.
1. I could not able to save the report in text file . Whenever i try to save the report output in a text file.It gives dump and application get closed.
2. In RTF format , it execute the query which i have given at the design time while creating a report . But while running i am passing query either through lexical parameter or passing value of where criteria user parameters. It display the output for the specified value. But when i save this report output in rtf file . It execute design time query and save that in a rtf file.
If any body is having any idea about it . Please let me ASAP . It is very urgent for me.
Thanks in advance

Try the following:
Do not generate the report to .rep file, but rename/copy the .rdf file to .rep file and execute it.

URGENT HELP:Reports Output in RTF Format

Hi,
I have a problem with Oracle Reports 3.0
I am generating a report output to a RTF file.
The report is output in landscape orientation in Reports Runtime
window.
But when I open the RTF document, the output is in
Portrait orientation and some of the information is getting out
of the view. If I manually change the orientation in the RTF
Page Setup, I am able to view the output properly.
Can this be automated by using some property/setup in Oracle
Reports 3.0?
Also, the BMPs are not visible in the RTF file.
Can anyone help me on these issues?
Regards,
Uma Shankar Varati
null

Hi Aravind,
I dont think there is any help in HTMLDB for this. There is this technical note: http://www.oracle.com/technology/pub/notes/technote_htmldb_fop.html I dont really like this approach.
You should consider using XML Publisher. Its a new Oracle product that is easy to use and really works! Actually its an Oracle Application product that is now standalone. Its much faster to use than making the xslt manually. You can make the templates in Word. We have a project where we dont make any templates. The customers make their own on each site.
There of cause is a licensing issue. Depending on you setup it can be expensive.
Check:
http://www.oracle.com/technology/products/applications/publishing/index.html
BI Publisher
You can download it from Oracle eDelivery:
http://edelivery.oracle.com/EPD/Download/get_form?egroup_part_number=B23145-01
Product Pack Oracle Application Server Products
Platform: Any (e.g. Window 32 Bit)
The part number is B23145-01: "Oracle® XML Publisher CD/Media Pack".
This includes the client and server side code + documentation and sample templates and applications.
Regards Pete

How to open Report output in RTF format using concurrent request form.

Hi
I have created a report using BI publisher and RTF format. This report is working fine in PDF format. User can submit report using consurrent request form and can see report preview in PDF format.
Now user wants to submit another request and wants to see report output in RTF format.
User submitted a request, request successfully completed and generated a output RTF file in unix box but when user wants to see report output using concurrent request form (View Output) then window is showing raw data instead of RTF output.
Can any body tell me about solutions?
Thanks
Ravi

Hi Ravi
I did little R&D on it and found following 2 solutions.I am sure that you also find something but for my shake i am putting it here.If you already find the solution then ignore it.
I) 1st Solution
1)Change the profiles 'Viewer: Application for Text' and put value as 'Browser'
2) Change the profiles 'Viewer: Text' and put value as 'Browser'.Either change it system level or concerned user.
3) Log out from Current session and close all internet explorer application.
4) Log in again to check the result
II) 2nd Solution
1) Navigate to: Sys admin --> Install -> Viewer Options to open the Form "Viewer Options".
Do the entry as shown below:
File_Format     Mime Type               Description
RTF          application/rtf Microsoft Word(.rtf)
RTF          application/msword          Microsoft Word(.rtf)
2) Then ensure that the profile option Viewer: Application for Text is set to BLANK at the Site Level and User Level.
3) Then ensure that the profile option Viewer: Text is set to 'browser' at the Site Level.
-- It will pop-up the screen to choose application name from above two values.
Hope this will work it for you. For me i replicated the scenario and both solutions were working for me.
With Best Regards
Darshan Bhavsar

Generate spool req number for report output list

Hi,
How to generate spool request number for report output list while executing the report.Please provide if you have any sample code.
Thanks and Regards,
BSR.

HI srinivas,
welcome to sdn.
Exporting the Contents of a Spool Request
Use
You want to export the content of a spool request in one of the following ways:
·        As a text file to the SAP GUI working directory
·        Unconverted or as a table, RTF, or HTML to a directory of your choice
·        As a PDF file to a directory of your choice
Procedure
Follow the procedure below:
Exporting to the SAP GUI Working Directory
If you are exporting large quantities of data, downloading the spool request as a text file to the SAP GUI working directory is a good solution.
Choose Spool Request ® Forward® Export as Text.
The entire text is stored in your SAP GUI working directory in ASCII format.
A file of this type is named using the following pattern:
.txt
Example: ABC0000004327.txt
You require appropriate authorization for this function from your administrator.
Exporting Unconverted or as a table, RTF, or HTML to a Directory of Your Choice
With this method of exporting a spool request, the content of the spool request is first displayed, and you then download the content in the format of your choice to a directory of your choice.
       1.      Select the spool request to be exported and choose Display Contents.
       2.      In the case of SAPscript/Smart Forms documents, activate list display by choosing Goto.
       3.      Choose System ® List ® Save ® Local File.
       4.      Choose one of the available formats and confirm your choice.
       5.      Choose a directory and save the spool request.
By default, only the first 10 pages of a spool request are saved in a file. You can increase the number of pages to be saved by choosing Goto ® Display Requests ® Settings and making the desired entries in the Display Area group box.
Exporting as a PDF File
You want to export the contents of a spool request as a PDF file to a directory of your choice, and print the file as required. The PDF file contains the print data in the format in which it would be output by the printer.
The following procedure is irrelevant for the printing of PDF-based forms, since a PDF file is already returned with this method. See also Displaying and Printing PDF-Based Forms.
You also require authorization from your administrator to run this report.
The PDF file is generated as follows with report RSTXPDFT4:
       1.      Generate a spool request from the document to be printed.
       2.      In transaction SE38, start report rstxpdft4.
       3.      In the displayed window, enter the spool request number and the directory in which the PDF file is to be stored.
Leave the Download PDF File option selected.
Choose Execute.
       4.      In the next window, you can confirm or change the path in which the file is be stored.
Save your entries.
       5.      The system displays a log from which you can see whether the report was successfully performed.
You can then open the file from the directory and print it as required.
Restrictions for Exporting as a PDF File
·        The PDF conversion only supports true bar codes for Smart Forms, which were generated with the new bar code technology as of SAP NetWeaver 04. In all other cases, the bar code is only simulated.
·        PDF conversion, especially of ABAP lists, is slower and is therefore not suitable for mass printing. However, you can speed up the conversion to PDF using the FASTLISTCONV option in report RSTXPDF3.
·        The font selection for ABAP lists is predefined in the PDF converter and cannot be changed.
For more information about constraints, see SAP Note 323736 in the SAP Service Marketplace
see this links
http://help.sap.com/saphelp_40b/helpdata/en/d9/4a98f351ea11d189570000e829fbbd/content.htm
http://web.mit.edu/SAPR3/docs/webdocs/reports/rpRFprint.html
regards
shankar
reward me if usefull

Adding/Enabling Totals & Subtotals Button in ALV Report Output

Hi Guys,
I would like to know , how to add / enable Totals & Subtotals Button on the application tool bar in alv report output.
Regards,
Kishan

ok so here i am sending my code....its also interactive...
and in second list i am displaying quantity....
*& Report ZINT_ALV
REPORT zint_alv.
TYPE-POOLS:slis.
TABLES:mara,
       makt,
       mseg.
DATA:BEGIN OF itab OCCURS 0,
      matnr LIKE mara-matnr,
      maktx LIKE makt-maktx,
     END OF itab.
DATA:BEGIN OF itab1 OCCURS 0,
      mblnr LIKE mseg-mblnr,
      menge LIKE mseg-menge,
      meins LIKE mseg-meins,
      werks LIKE mseg-werks,
     END OF itab1.
DATA:fcat TYPE slis_t_fieldcat_alv,
     fcat1 TYPE slis_t_fieldcat_alv,
     eve TYPE slis_t_event,
     eve1 TYPE slis_t_event.
DATA:t_mat LIKE mara-matnr,
     s_mat LIKE mara-matnr,
     g_repid LIKE sy-repid.
SELECTION-SCREEN:BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:mat FOR mara-matnr OBLIGATORY.
SELECTION-SCREEN:END OF BLOCK blk1.
INITIALIZATION.
PERFORM build_fcat USING fcat.
PERFORM build_eve.
START-OF-SELECTION.
PERFORM get_data.
PERFORM dis_data.
*&      Form build_fcat
      text
     -->T_FCAT     text
FORM build_fcat USING t_fcat TYPE slis_t_fieldcat_alv.
DATA:wa_fcat TYPE slis_fieldcat_alv.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-ref_fieldname = 'MATNR'.
wa_fcat-ref_tabname = 'MARA'.
wa_fcat-seltext_m = 'Material'.
wa_fcat-input = ' '.
wa_fcat-edit = 'X'.
wa_fcat-input = 'X'.
APPEND wa_fcat TO t_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MAKTX'.
wa_fcat-seltext_m = 'Description'.
APPEND wa_fcat TO t_fcat.
CLEAR wa_fcat.
ENDFORM.                    "build_fcat
*&      Form build_eve
      text
FORM build_eve.
DATA:t_eve TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     i_list_type           = 0
   IMPORTING
     et_events             = eve
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "build_eve
*&      Form get_data
      text
FORM get_data.
SELECT maramatnr maktmaktx INTO CORRESPONDING FIELDS OF TABLE itab
FROM mara INNER JOIN makt
ON maramatnr = maktmatnr
WHERE mara~matnr IN mat.
ENDFORM.                    "get_data
*&      Form dis_data
      text
FORM dis_data.
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = g_repid         "'ZINT_ALV'
     i_callback_user_command           = 'USER_COMMAND'
     i_grid_title                      = 'Interactive ALV'
     it_fieldcat                       = fcat
     it_events                         = eve
    TABLES
      t_outtab                          = itab
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "dis_data
*&      Form user_command
      text
     -->U_COM      text
FORM user_command USING u_com LIKE sy-ucomm sel_field TYPE slis_selfield.
CLEAR fcat1.
CASE u_com.
    WHEN '&IC1'.
      READ TABLE itab INDEX sel_field-tabindex.
      IF sel_field-fieldname = 'MATNR'.
        IF sy-subrc = 0.
          t_mat = itab-matnr.
          PERFORM build_cat1 USING fcat1.
          PERFORM build_eve1.
          PERFORM get_data1.
          PERFORM dis_data1.
        ENDIF.
      ENDIF.
     SET PARAMETER ID 'MAT' FIELD t_mat.
     CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.                    "user_command
*&      Form build_fcat1
      text
     -->T_FCAT1    text
FORM build_cat1 USING t_fcat1 TYPE slis_t_fieldcat_alv.
DATA:wa_fcat1 TYPE slis_fieldcat_alv.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MBLNR'.
wa_fcat1-seltext_m = 'Material Doc.'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MENGE'.
wa_fcat1-seltext_m = 'Quantity'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MEINS'.
wa_fcat1-seltext_m = 'UOM'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'WERKS'.
wa_fcat1-seltext_m = 'Plant'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
ENDFORM.                    "build_fcat1
*&      Form build_eve1
      text
FORM build_eve1.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = eve1
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    "build_eve1
*&      Form get_data1
      text
FORM get_data1.
SELECT mblnr menge meins werks FROM mseg
INTO CORRESPONDING FIELDS OF TABLE itab1
WHERE matnr = t_mat.
ENDFORM.                                                    "get_data1
*&      Form dis_data1
      text
FORM dis_data1.
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = g_repid              "'ZINT_ALV'
     i_callback_user_command           = 'USER_COMMAND1'
     it_fieldcat                       = fcat1
     it_events                         = eve1
    TABLES
      t_outtab                          = itab1
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    "dis_data1

Unable to send report output to printer when using RUN_REPORT_OBJECT in 10g

Hello All,
When I try to send my report output to a file from my form(10g), I get 'FRM-41213: Unable to connect to report server'. I can sucessfully send my report to printer when I set the REPORT_DESTYPE to 'PRINTER'.Here is the code from my when-button-pressed trigger.
Am I missing something?
declare
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := find_report_object('PWRR_CTRL_TYP_MAINT');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_ipkcaf7vm');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'DFLT');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'C:\TEST1.doc');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
     LOOP
     rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
          msg_alert('Report print successfully', 'I', FALSE);
ELSE
     msg_alert('Error when running report', 'I', FALSE);
END IF;
END;
Thanks,
Anna

Hi,
its because
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'C:\TEST1.doc');
references the report rdf pr rep file to run, not the output file. The Reports output file is always specified with DESNAME
Frank

Error when sending report output to printer from Forms 10g

Hi,
I have a simple report that I am running from a form using run_report_object built-in. I can successfully send the report output to a file but when I send the report output to a printer my report is
terminated with report status of 'TERMINATED_WITH_ERROR'. I am using the default forms service and reports server that comes with the forms builder. How do I specify the reports server to user my default network printer ?Following is the code that runs my report.
Thanks,
Anna
PROCEDURE SEND_TO_PRINTER IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
rep_server system_variables.reports_server%type;
alldone          exception;
BEGIN
     select reports_server
     into rep_server
     from system_variables;
     if rep_server is null then
          msg_alert('Error getting the reports server name', 'I', FALSE);
          raise alldone;
     end if;
     :ctrl.run_report_errors := 'N';
     repid := find_report_object('REP_OBJ1');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,rep_server);
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
     IF :ctrl.rg_print = 'P' THEN
          --Send the output to printer.
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
     ELSIF :ctrl.rg_print = 'R' THEN
          --Rich Text Format
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'rtf');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:ctrl.filename);
     END IF;
     v_rep := RUN_REPORT_OBJECT(repid);
     rep_status := REPORT_OBJECT_STATUS(v_rep);
     WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
     LOOP
          rep_status := report_object_status(v_rep);
     END LOOP;
     IF rep_status = 'FINISHED' THEN
          null;
     ELSE
          :ctrl.run_report_errors := 'Y';
          msg_alert('Error when running report.' || rep_status, 'I', FALSE);
     END IF;
EXCEPTION
     when no_data_found then
          msg_alert('Error getting the reports server name', 'I', FALSE);
     when alldone then
          null;
END;

If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel.

Xml report output in excel format without using options tab in EBS

How to get xml publisher report output in excel format without using options tab in EBS?
I am getting XML Publisher report output in excel format by using options tab while submitting the concurrent request .
But i want to get excel output automatically.
Can anyone give idea to get XML publisher Report output in excel without selecting options tab.
Thanks in advance
Sandeep V

Hey Sandeep,
I am working on a similar format for a report and if possible can you please give me some guidelines. I have initially created reports using XML Publisher, but for those , the output preview format was PDF. So, if I select the preview format as EXCEL will it give me output in Excel and for this to happen, how do I define the rtf template. I believe the working will be same as for PDF, create a rdf report, get output in XML and apply the template to get the data in Excel or there is something different to this.
Thanks,
Sunil

How to Create MultiSheet Excel Report Output in XML Publisher in Oracle R12

Dear All,
How to Create MultiSheet Excel Report Output in XML Publisher in Oracle R12.
My Requirement is to develop RTF Template and geneate Excel output in Multiple sheet.
plz guide me on this..
thnx
Khushal

plz see
BI Publisher: How to create Multisheet in Single Excel file using Excel Template [ID 1352000.1]
for r12 you can use excel template
i think it more appropriate for excel output

Oracle Matrix Report output to XML Publisher

We have an Oracle matrix report (rdf) registered in our applications and we are trying to format the report output using XML publisher.
I have taken XML output of the report by changing the Report output to XML in concurrent program definition. Using this XML output we have started designing the RTF template using Template Builder for Word 5.6.2.
I am not able to get the MAtrix output in XML publisher. I am not sure how to design a Matrix Report using Template builder for word. I am not sure whether the XML output of Original Report has Tags mentioning Matrix report attributes or Not.
Can anyone help me by explaining how to design a Matrix Report template using XML report output. Appreicate your help.

I have posted a Blog on our blog site about how to create a matrix report in XML-Publisher
http://technology.amis.nl/blog/?p=1558
Perhaps this helps.
Marcos

BI Publisher - PO_DISPATCH Error generating report output

Hi everyone,
Sorry for my bad english... having said that...
I need to modify the Purchase Order print. First, I wanted to see the standard version to get an idea of how much different it was. Well, I don't know because it doesn't work.
Error:
Error generating report output: (235,2309)
Error occurred during the process of generating the output file from template file, XML data file, and translation XLIFF file.
I know there are several topics on the web, but all of them are about new or custom reports, this is a standard one. When I preview the report on the report definition it works fine, so I assume there's a problem with the XML file generated. When I preview the report specifying an alternative XML I get the same error. The XML file I choose was the one generated by PeopleSoft when trying to view the printable version of the PO online.
So, I start cutting portions of the XML File. I started leaving only de Header Data and it works OK, when I add the Lines it failed. I add the Line Fields one by one to detect what was the problem... And finally it failed when I add AMT_LINE_MAX. Why? No idea, is it because its value is '0,000' instead of '0.000'? I don't think that should be the problem since there are other numeric fields on the header, all with ',' as a decimal separator...
Am I missing some configuration?
Thanks in advance.
Regards,
Veronica.

Have a look at the following doc:
"Error generating report output. (235,2309)" When Running the "PO XMLP Dispatch" XML Publisher Report (PO_DISPATCH) for a Purchase Order with a Ship To Location with Special Characters in the Address [ID 1299876.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=1299876.1
Stating this happens for example when there is a location with special characters.

Report Output In DOC or RTF

Similar Messages

Maybe you are looking for