Report Painter : Local currency is having decimal points for chile

Hi Friends,
I have a report painter in which the amount for the the countries which are not having the decimal places
like chile and Japan are displying with the decimal places, when i changed the base key figure as the transaction currency instead of the local currency then no data is coming.
If someone have some good ideas which can resolve this issue please suggest me.
Thanks & Regards
Digvijay

Hi Yogesh,
Thank you for ur reply.
in the report, i have 10 keyfigures. 4 are being picked up from the report and they have currency translation variable. The rest 6 are formulas. On these formulae, i restricted the decimal display to "nothing defined". it works fine for all the 6 formulae. for WON it does NOT show decimals and for the rest of the currencies, it shows decimals.
but how this can be achieved on the 4 direct keyfigures??
Rgds.,
ASha

Similar Messages

  • F5061  Balance in local currency EUR is too large for automatic adjustment

    My Company code currency is EUR. The customer has made a downpayment in USD (say 100) and i am now to clear the same against invoice of same amount in USD (100 $) but its is resulting into minor differences in Local currency. I am getting the following error
    Balance in local currency EUR is too large for automatic adjustment
    Message no. F5061
    Diagnosis
    For postings in foreign currency, it is possible that the balance in foreign currency is zero, but not in local currency. Providing the balance in local currency does not amount to more currency units than the document has line items, the system adjusts the amounts automatically. If an automatic adjustment is not possible, the amounts must be adjusted manually in local currency.
    System Response
    The document is not posted in local currency without adjusting the amounts.
    Procedure
    Adjust the amounts in local currency.
    How can i have the system automatically fetch the Gl accounts to post the exchange rate differeces.
    I have maintained the settings in FBKP- Exchange rate differenes
    Thanks & Regards
    Pooja

    Hi,
    I have the same problem; my company code is defined in HUF and I am trying to post a vendor invoice in Euros.
    I have a 10% maintained there and still receiving the error, either for differences of just one HUF. The strangest thing is that differences are automatically adjusted (also for discrepancies over the 10%) when posting through FB60 but not when using FB01.
    Any idea?
    Thanks in advance for your input.
    Best regards.

  • Upto 4 decimal point for unit of measure

    hi,
    We have requirement to maintain upto 4 decimal point in PO and sales order quantity for unit of measure M3. Example PO quanity 0.3902 m3, sales order quantity 2.3212 m3,   SAP allow upto 3 decimal point, how to handle this 4 decimal point for unit of measure and any impact to do so ?
    best rgds,

    Dear Eric,
    To change decimal places of Materials follow this:
    IMG - SAP NetWeaver - General Settings - Check Units of Measurement
    select Units of Measurement & select required Unit of Measure & set decimal places.
    Hope this helps...
    Give points if useful...
    Thanks,
    Jignesh Mehta

  • CP7 - Show 4 (or more) decimal points for User Variable?

    Is there a way to show 4 or more decimal points for user variables?
    For some reason, I'm only showing two decimal points for user variables in Captivate 7.
    Micky

    Yeah, I was afraid of that.
    Right now, I have am dividing the values of two separate text box entry fields.  I have to calculate the values to determine if they are getting a promotion, lateral transfer or lower pay range.
    I'll figure out a workaround or just use java.

  • How to increase Decimal Points for the BOM Component Quantity

    Hi All,
    While creating BOM:
    Can anyone help me to know how i can increase the Decimal points for the BOM components quantity.
    I can able to give only upto 3 decimal points, but the requirement is more than that.
    I have increased the Decimal point value to 5 in transaction Code CUNI. but still it is allowing me to enter only upto three decimal places.
    Thanks and Regards
    Khadeer

    Khadeer,
    You would be better off changing the base quantity of the parent part.  Instead of "1 EA  parent contains .00003MG of  component" you could say "100 EA parents contain .003MG of component".
    Alternately, you could use different units of measure for your parent or component parts, which would be more suitable for the 3 place decimal limitation.
    I agree with Anil in that if you elect to change the decimals from standard, you could end up with huge changes that will propagate through every module in the ERP.  In my view, there is no need of this kind of headache.
    Best Regards,
    DB49

  • Financial Analytics Reports in Local Currency

    Advise needed to help in configuring BI Apps such that the Financial Analytics reports (GL, Payables, Profitability & Receivables) show the transaction values in local currency i.e. INR instead of the default global currency USD.
    I have changed the source parameter values in the DAC Container Setup while loading the data from an EBS R12 instance. The following source parameters values have been changed to INR from USD -
    $$GLOBAL1_CURR_CODE (for the document currency)
    $$GLOBAL2_CURR_CODE (for the local currency)
    $$GLOBAL3_CURR_CODE (for the global currency)
    However, the Finacial Analytics Reports do not show any transactional values for the selected Ledger (having INR as the global currency). The data is populated in the Local Closing Amount, Local Opening Amount etc columns of the Fact - GL Balance but no data is populated in the Closing Amount (Global), Opening Amount(Global) etc columns.
    Please advise to resolve the above mentioned localization issue in Financial Analytics.
    Regards

    Are you looking for Changing the Default currency in OBIA Dashboards

  • 2 Decimal Points for Indonesian Rupiah Currency

    Dear All,
    I would like to assign 2 decimal points to Indonesian Rupiah Curreny - IDR by accessing OY04.
    However, there is no input value for 2 decimal points.
    For accounting purpose, we would like to record business transactions up to 2 decimal points.
    Kindly advise.
    Appreciate it!

    Hi wishy washy,
    even I had various real painfull experiences with clients who changed the decimals..... Still having nightmares about this....
    Please be hypercarefull with that what you are doing. Has IDR really 2 decimals? As far as I can see IDR has in Standard (In my SAP-testsystem) no decimals.
    What happens if you change the decimals? Please note, SAP stores values always without decimals.
    Example: 100,00 Euros are stored as 10000 in bseg-wrbtr.
    Euro has 2 decimals.
    If you change the decimals to 0 the amount changes to 10000 Euros.
    Example: 100 IDR are stored as 100 in bseg wrbtr.
    IDR has no decimals
    If you change the decimals to 2 the amount changes to 1,00 IDR.
    Please consider: automatic taxcalculation, Data carriers, reporting, open item clearing, budgeting, depreciation, and hundreds of other issues.
    The several warnings of OY04 have a reason... and I don't want you to have my nightmares.
    Best regards
       Horst

  • Do NOT display decimal points for 1 currency

    Dear Friends,
    i have a report which shows the revenue of all countries. we have a target currency (variable) in the report.if we give that target currency as EUR, it changes al currencies into EUR. similarly if we give USD, the report will change all currencies to USD with decimal points
    But the requirement here is, for all other countries, the decimal points shud get displayed for the revenue, but only for Korea curreny (WON) the decimal points shud not be dispayed.
    in the table TCURC, for Korea it is maintained as " whole numbers only ".
    is there a way to achieve this??
    Rgds.,
    ASha

    Hi Yogesh,
    Thank you for ur reply.
    in the report, i have 10 keyfigures. 4 are being picked up from the report and they have currency translation variable. The rest 6 are formulas. On these formulae, i restricted the decimal display to "nothing defined". it works fine for all the 6 formulae. for WON it does NOT show decimals and for the rest of the currencies, it shows decimals.
    but how this can be achieved on the 4 direct keyfigures??
    Rgds.,
    ASha

  • Dynamic displaying of decimal points for currency field in ALV

    Hi,
            In ALV output there is a currency field and displaying data of different countries. It should display decimal point according to the country's currency. But at a time it can display data of different countries.

    Hi Dilip,
    I think your question is about currencies with different number of digits after decimal point. If you have the currency field in the ALV row, you have to give it's name as currency reference for the value field in the field catalog.
    After creating the field catalog, call a form and do something like this (change fielnames accordingly).
    <pre>
    *&      Form  alv_fieldcat_enhance
          Individual Enrichment of field catalog
    FORM alv_fieldcat_enhance
      CHANGING pt_alv_fieldcat TYPE slis_t_fieldcat_alv.
      FIELD-SYMBOLS:
        <alv_fieldcat> TYPE slis_fieldcat_alv.
      LOOP AT pt_alv_fieldcat ASSIGNING <alv_fieldcat>.
        IF <alv_fieldcat>-fieldname(5) = 'KBETR' OR
           <alv_fieldcat>-fieldname(5) = 'SKBTR' OR
           <alv_fieldcat>-fieldname(5) = 'DMBTR'.
    Company code currency
          <alv_fieldcat>-cfieldname = 'BWAER'.
    Document Currency for conditions, net value and taxes
        ELSEIF  <alv_fieldcat>-fieldname(5) = 'KWERT' OR
                <alv_fieldcat>-fieldname    = 'NETWR' OR
                <alv_fieldcat>-fieldname    = 'NPAX_MWST_AMNT'.
    Document Currency
          <alv_fieldcat>-cfieldname = 'WAERK'.
        ENDIF." <alv_fieldcat>-fieldname(5) = 'KBETR' or
      ENDLOOP." at pt_alv_fieldcat assigning <fieldcat_alv>.
    ENDFORM.                    " alv_fieldcat_enhance
    </pre>
    Regards,
    Clemens

  • Decimal point  for Price value in  ALV Report

    HI,
    I have created ALV report,
    I have 2 price fields in ALV report
    For first field i have to display  in the below format.
    If the value of the field is 3601152 then I have to display it as 36011.52 
    For second field I have to display in the below format
    if the  value is 2494 then I have to display it as 2495.00
    else if the value is 3498.73,then I need not to do anything.
    that means If there is no decimal point, then I have to keep decimal point.
    Thanks&Regards
    RamaDevi

    HI,
    you can work with search and concatenate.
    value1 = 3601152
    search value1 for '.' .
    if sy-subrc eq 0.
      concatenate value1(5) '.' value1(2)+5 into text.
    Or value1 = value1 / 100.
    endif.
    Regards
    Nicole

  • Bank GL Report in Local currency

    Hi SAP Friends,
    My client requirement is that All accounts are to be maintained in Local Currency (MYR) and there is only 2 USD bank accounts (City Bank, MBB) to be maintained in foreign currency and also require converting to Local Currency (MYR) for reporting purpose.
    Looking forward for your valuable inputs
    Thanks
    Para

    hi
    V K Para         
    Go to T CODE-S_PLO_86000031 OR S_PLO_86000030
    IN this screen give currency as you want
    you can view balances in USD
    REGARDS
    TRINADHNAIDU.A
    Edited by: trinadhrao althi on Oct 20, 2008 2:02 PM

  • 0SD_C03 report in local currency

    Dear all,
    I would like to get report in my local currency in 0SD_C03 , however all kf's are in statistical currency unit,
    is there any way to get in local currency, i entered in sales order, other than currecy translation in bex?
    Thanks

    hi john,
    just if that is a Standard Query , u can't perform any change over that,
    otherwise u can create a copy query of ur standard query,
    there u can edit the Key figures, nad then in the conversion tab u can select ur Target currency.
    Remeber this Currency transaltion will only take place at runtime,
    thanks.

  • Report Painter and currency issue

    Hi All:
    We have several report painter based on table FAGLFLEXT and have a problem maintaing the company code currency in report results.
    Here is the scenario:
    User 1 runs report for a company code A in country A with Currency A
    User 1 does a currency conversion to Currency B.  Report is now shown in Company code A, for Country A with Currency B
    User 1 exits report and is prompted to if they want to save their data.
    User 1 selects that they do want to save data (this is a data save..not a report layout or defintion save).
    User 2 now runs same report for Company code C in country C with currency C
    Results of report are now in Currency B as this was what was saved by User 1
    I have found that it requires both the currency conversion and the Save Data function to make this happen.  If only one of these steps is done, User 2 gets results in Currency C.
    I believe I can fix the problem by removing the authorization to "Save Data"...but would like to find a better solution..Any ideas would be most appreciated

    Hi,
    Can you please forward the material on drill down report.
    It is very much required to meet client requirement
    Thanq
    haribabu

  • Report Painter - Multiple Currencies

    Hi,
    I would like to know on how you create multiple currencies in report painter. We have a requirement
    whereby we have 3 different columns:
    Current Year (Actuals)  ---> Exchange rate Type X
    Prior Year  (Actuals)
    Plan Current Year  -
    > Exchange rate Type Y
    My question is how can i create a report that will enable me to prompt for exchange rate of Actuals and Plan data  as  we would like the user to enter different exchange rate type for actual & plan.
    Appreciate your help.

    Hi,
    I'm afraid, it's not possible via Report Painter (to have different columns calculated by different rate); you'll have to develop a report in ABAP for this.
    Regards,
    Eli

  • Diplay Functional,Reporting and Local currency

    Hi,
    I've a requirement to display Transactions in functional,Reporting as well as in Local currency.Do I need to setup Oracle 11i Env in MRC for that?If so how to get the transactions displayed in Local cuirrency ?Do I need to Covert them or I've to create new set of books for the same like we create one for reporting currency?
    This requirement is for 11.5.10.2 as well as R12
    Thanks,
    Mahender
    Edited by: user518071 on Jul 30, 2010 6:20 AM

    Hi
    You need to do the following
    In 11i
    1. You need to set up Reporting Set of Books to get the transactions and reports in Reporting currency for Local Currency, Functional Currency.
    2. If your Functional Currency is USD, Reporting Currency is EUR and Local Currency is AED, then you need to set Main SOB in USD and Reporting SOB in EUR and AED.
    In R12
    1. You can set Reporting currency if you need the transactions and reports in Reporting currency provided Chart of Accounts, Calendar and Convention is same.
    If your Functional Currency is USD, Reporting Currency is EUR and Local Currency is AED, then you need to set Main SOB in USD and Reporting SOB in EUR and AED.
    2. If the requirement is not only currency but you need for a different Calendar or COA or Accounting convention, then you need to set a Secondary Ledger
    Hope this helps
    Regards
    Sivakumar

Maybe you are looking for