Report Painter - missing column in GRR1/GRR2 but appears when executed

Hi
I have a report with 10 columns in addition to the first column that contains the descriptions of the rows, i.e. Sales Revenue etc etc.  The columns across are different projects. However, most strangely, the first of the projects does not appear when I am in GRR2 or GRR3 but when I execute the report, it is there!!!  When I look at the Overview in GRR2 and GRR3, it is listed so am at a loss to explain where it has gone.
any suggestions?

Hello,
1) hide the first column
2) unhide the column
3) you´ll see the column which you were missing instead of the former first column
4) change the column or whatever you want to do
5) hide the column
6) unhide the column
Now the formular is as it was before. Still you can´t see the column but you know it´s there and you´ll see it in the report.
I searched a lot and didn´t found any other solution.
Reg.
A.S.

Similar Messages

  • Report Painter - Dynamic Columns

    Dear Expert,
    I'm preparing a report painter report with cost centers as columns.
    Is there anyway I can use cost center group as variable and then the no. of columns and column texts are populated based on the no. of cost centers and cost center names exist in that cost center group?
    Thanks in advance and regards,
    Junior

    Hi
    To define anything as variable, you should have the details like - TABLE / STRUCTURE details.
    But, for any groups ( Cost element group / Cost center group) - no table / structure available
    VVR

  • Report Painter - Invisible Column

    Hello All -
    I am creating a report painter report using internal order table.
    When I execute the report, I am seeing a column that I don't see when I am editing the configuration of the report.
    I have looked to see if the column resides on a different Section, Horizontal Page, or is Hidden.
    I don't see multiple Sections or Horizontal Pages and nothing seems hidden.
    Am I missing something? 
    Thanks!
    Emmas

    Hi,
    Check if parameter 'Suppress zero columns' was selected in report layout.
    Menu Formatting -> Report Layout.
    Regards
    Sam

  • Report painter - Choosing column heading text

    Hi SDN
    I'm having a specific problem with getting the right column heading text into my G/L report painter report created in FGI2/FGI5. In the report painter form I have created the three texts for my column (short, medium and long text). In order for the heading to be meaningful I need the report to show the medium or long text. This is also the case when I run the report as object type Object list. Here the medium text is displayed. However, when I run the report as a Classic drilldown report or a Graphical report output the short column heading text is shown.
    Now, I know from running the standard report 0SAPBLNCE-01 in FGI0 that it is possible to have the long column header text shown in the report, so I'm not willing to give up. But can any of you guys help me on how to make the report show the correct text?
    Kind rgds
    Steen Koefoed

    Hi Anna and thanks for your suggestion. I have tried changing the header text length in the form as you suggested, but it does not seem to affect the display in neither of the three output types of the report. I assume that there must be a way to control the text header length specifically for each of the three output types. But how....

  • Report Painter - New Columns Don't Show Up

    Hello All,
    We have a report painter report that was copied from an existing report in transaction CJE5 (for modifying the form) and then assigned in CJE1 (to a report). The copied report was functioning properly with an existing tcode assignment. Now, I am trying to add new columns to the same form and I was able to add and save everything to the form without errors. However, when I execute the report, these new columns don't appear on the report. Can anyone suggest why?
    One thing I notice was that when I went to the "Report Parameters", the list of "Columns" does not include the columns that I added. I cannot figure out how to add them to the list so that they would start appearing on the report output.

    Hello Suresh, Thanks for the suggestion, but report painter is a functional area and the ABAPer should not be required to insert a new column and make it appear on the report. Any more suggestions, please?

  • Report Painter - adding columns with any texts.....

    Hello !
    Whether probably in Report Painter to create additional columns (adhered to columns of data) and to write there manually demanded texts for lines ?

    Hello - I don't see Insert Diving Line after I click Insert Blank Line.
    Where is that?
    If I insert a blank line and then double click on the blank line to add a line like the following:  "__________" for sub totals, etc, I can't.  I can only add another characteristic or formula in the blank line.
    Please help and thanks for your help!

  • Report painter, lead column doesn't display the key, only description is di

    Hi Gurus,
    I am facing a problem as the report painter report only shows the description for the objnr (charasterstic) and not the key and description thoughin the format key and description is set. Kindly suggest me the how to overcome this problem.
    Example of the problem-
    The problem is that the report displays the descriptions (like u201CRéseauAiru201D on the first line) and not the code (E100/002831/EP-AIR) that we wish in the lead clolumn.
    Regards,
    Sachin

    Hi
    Once you execute the report and the output is displayed....
    Go to Settings > Char Display > Choose "Key and Description"
    Then Choose menu Report > Save Definition
    BR,Ajay M

  • Vi works in LabVIEW, but not when executed by TestStand.

    Hi everybody.  I'm using LabVIEW 8 with the Sound and Vibration
    Toolkit, and TestStand2.  I am planning on using TestStand to
    execute a series of performance tests on an audio processing
    board.  When run independently, the vi (which I have attached
    here) runs correctly, and returns a value for the parameter being
    tested.  In this case it is SNR.
    However, when executed by TestStand, the vi seems to run correctly, but
    returns a value of "NaN".  This causes TestStand to fail the test.
    Does anybody know what is going on here?  I've checked FAQs and
    help files, etc...  Why would the vi work on its own but not in
    TestStand?
    Thanks.
    Brett Gildersleeve
    Attachments:
    SingleChannelSNR.vi ‏173 KB
    Test Sequence.seq ‏15 KB

    Hi Ray,  Thanks for the reply.
    Basically, when I run the VI on its own, I see the SNR value appearing
    both in the SNR indicator and in the Test Data Out cluster under
    Numeric Measurement.  The rest of the indicators are empty
    (string, report text, status, code, source).  My waveform graph
    shows an FFT of the signal.
    However, when running the exact same VI through TestStand, I get NaN as
    the output.  The FFT of the signal is NOT displayed in the
    waveform graph...  strange.  No errors are received.
    In order to make it easier to debug, I replaced all of the analysis functions
    with functions included in LabVIEW 8.  Now everybody should be
    able to run it.  I do a simple THD test this time around.  With the VI running
    on its own, I get a value of 1.8 as the THD and the Numeric Measurement of Test Data
    Out.  However, whenever running the test with TestStand, I get a
    value of NaN.
    Same problem.
    Any suggestions?
    By the way, what exactly do you mean by "wiring
    up the Error cluster and feed in to the Error Out."?  I'd
    like to try it out, but I'm not sure exactly what you mean.  I
    already have the Error out cluster wired up, I think.
    Message Edited by TheSleeve on 05-22-2006 12:12 PM
    Attachments:
    SingleChannelTHD.vi ‏159 KB
    Test Sequence2.seq ‏15 KB

  • Planning form some columns set to hide but appear in SmartView

    I have a Planning form with about 30 columns. Some of these columns are set to hide. The hidden columns still appear in SmartView. How can I get them to hide in SmartView?

    Hi,
    May I ask you why you have these columns in the form that you actually want to hide?
    I was able to recreate your problem. In web the columns are hidden but in Smartview it comes up.
    Regards,
    Amol
    Edited by: AmolDatt on Apr 29, 2009 11:20 AM

  • Excel Import Fails in SQL Server Agent Job but not when executed in BIDS

    We have a SQL Server agent job that has ran successfully for the past 6 months.  It started failing about a week ago.  I don't believe anyone installed anything on the server.  The proxy account used to run the job is an admin on the server.   
    I've tried everything I can think of or that I found on searches.  I even changed the connection manager from an Excel source to using an Microsoft office 12.0 Access Database Engine OLEDB connection and it still runs in BIDs and not as an agent job. 
    I also setup my LANID as a proxy account to see if the job would run (checking security) -- and it fails with the same error.   I also made sure the path is
    \\server\share rather than a drive letter.   Any ideas?
    The package is executed in 32 bit mode.  The package still runs fine in BIDS (where BIDs is opened on the server) but fails in the SQL Agent job with:
    Executed as user: xxxxxx\xxxxxx. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 32-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  9:00:00 AM  Error: 2014-12-01 09:00:02.46    
    Code: 0xC0202009     Source: xxxxxx Connection manager "Excel Connection Manager"     Description: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.  An OLE
    DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "External table is not in the expected format.".  End Error  Error: 2014-12-01 09:00:02.65    
    Code: 0xC020801C     Source: Load File to Staging Excel Source [43]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager
    "Excel Connection Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.  End Error  Error: 2014-12-01 09:00:02.77    
    Code: 0xC0047017     Source: Load File to Staging SSIS.Pipeline     Description: Excel Source failed validation and returned error code 0xC020801C.  End Error  Error: 2014-12-01 09:00:02.90    
    Code: 0xC004700C     Source: Load File to Staging SSIS.Pipeline     Description: One or more component failed validation.  End Error  Error: 2014-12-01 09:00:03.02     Code: 0xC0024107    
    Source: Load File to Staging      Description: There were errors during task validation.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  9:00:00 AM  Finished: 9:00:03 AM 
    Elapsed:  2.761 seconds.  The package execution failed.  The step failed.

    I logged on to the server with the account that the SQL Agent runs under and ran the following from a command
    line to execute the package:
    "D:\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTEXEC.exe" /FILE
    "\"K:\SSIS\xxxxxx\xxxxx.dtsx\"" /CHECKPOINTING OFF 
    /REPORTING EWCDI  /X86
    I wanted to see if it was a security issue with the agent account account - but
    this ran fine.
    I then updated the SQL Agent job to use an operating system command instead
    of a SSIS package on the job step.  This fails...
    The issue is definately with the SQL Server Agent

  • FM CRM_PRIDOC_READ_OW works in source system but not when executed from BW

    Hello All,
    I have extended an extractor in the source system by adding additional fields.
    One of the FM I've used is CRM_PRIDOC_READ_OW. When I run an extraction test in the source system eveything works and data does populates into the new fields.But when I run the infopackage from the BW side, I get an error message which saids the transaction has been terminated. I've been able to trace and pinpoint the possible cause of the error. When I do not call this FM, the infopackage finishes but I do not get data for the new fields and when I do call this FM, I get the error.
    Has anyone experiance this issue before?
    Your assistance will be much appreciated. Here is a portion of the code I wrote:
      loop at I_TABLE into l_s_ZASCRM_OPPT_I.
        lv_guid = l_s_ZASCRM_OPPT_I-GUID.
        lv_item_guid = l_s_ZASCRM_OPPT_I-ITEM_GUID.
        call function 'CRM_PRIDOC_READ_OW'
          exporting
          iv_header_guid = lv_guid
          importing
          ES_PRIDOC = ls_pridoc.
        loop at ls_pridoc-PRIC_COND into ls_pric_cond.
          if ls_pric_cond-kposn = lv_item_guid.
            case ls_pric_cond-STUNR.
              when '40'.
                l_s_ZASCRM_OPPT_I-zz_gpm_ttl_i = ls_pric_cond-kwert.
              when '55'.
                l_s_ZASCRM_OPPT_I-zz_gpd_ttl_i = ls_pric_cond-kwert.
              when '60'.
                l_s_ZASCRM_OPPT_I-zzfy_sp_i = ls_pric_cond-kwert.
              when '70'.
                l_s_ZASCRM_OPPT_I-zzfy_gpm_i = ls_pric_cond-kwert.
              when '80'.
                l_s_ZASCRM_OPPT_I-zzfy_gpd_i = ls_pric_cond-kwert.
            endcase.
          endif.
        endloop.
        append l_s_ZASCRM_OPPT_I to l_s_ZASCRM_OPPT_Itab.
        clear l_s_ZASCRM_OPPT_I.
      endloop
    Thanks,
    Jeff

    Hello Geo!
    Thank you for your question. I think we mapped all the systems you show. Always the same error. Concerning your systems my transport log would say:
    Source system R3DEV does not exist
    We mapped this.
    Any ideas? Is there maybe something in customizing to do what could be forgetten? The system is newly connected and there have never been a transport compounded to this source system before.
    Best regards,
    Peter

  • Album art is not appearing on my iPad but appears when plugged into iTunes.

    Hi everyone -
    Having a major issue: I have about 8000 songs accumulated on my iPad Mini 3 with Retina display [running iOS 8.2] from my main computer in a different country. All my album art used to appear and everything was all well and good until I plugged my iPad into my MacBook Pro this morning to charge. While charging, I made one small spelling correction to an album error, at which point my iPad started to sync and then all the album art disappeared from my iPad. When I play the music in iTunes with my iPad connected, the album art appears in the small square at the top but whenever I play it on my iPad, there is no album art.
    Is there a fix to this inconvenient issue? I'd appreciate your help!

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Restart your mobile device.

  • Why does the background color in a saved pdf disappear when opened in Acrobat Pro 9.0 but appears when opened in Adobe Reader?

    Does someone know why this happens? BTW it only started recently.

    Hi bozieone,
    Does this issue occur on any test pdf created as well?
    What OS are you using?
    Regards,
    Rave

  • Getting waved-horizontal lines running through my photos...Happens not during time of working image in photoshop...but appears when sending to files or other applications, such as after printing back to files...?  Mac checked out OK.

    Getting waved-horizontal lines in my imagery just after working in photoshop...sending to files as with after completing some applications, such as printing. Nothing is wrong with my Mac...Issue does not occur every time I go into using Photoshop?

    Doesn't matter what kind of file...size, jpeg or tiff, black and white as color, etc...Something is in the software issue for my upgraded CS 5 Photoshop, running on a Mac OSX with Leopard version. The CS 5 Adobe software was in an up-grade from CS 3. Best I can do and I thank you for any suggestions based on your experienced background as I can only offer a general interpretation with the waved-horizontal lines that run across some of my images from being in the Photoshop mode from Bridge.

  • Why do inserted PIX disappear when sent, but appear when returned by receiver?

    When a number of PIX are cut and pasted from one e-mail to another e-mail the pix disappear at the receiver end or a blank box or space appears. The reply from the receiver shows the embedded PIX. This problem has existed for quite sometime and appears endemic to all provider software. The other providers have similarly been notified without a response or solution. Can the Mozilla team resolve this problem?

    Firefox doesn't do email, it's strictly a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [https://support.mozillamessaging.com/en-US/home] <br />
    or this one <br />
    [http://forums.mozillazine.org/viewforum.php?f=39]

Maybe you are looking for