Report painter performance problem...
I have a client which runs a report group consists of 14 reports... When we run this program... It takes about 20 minutes to get results... I was assigned to optimize this report...
This is what I've done so far
(this is a SAP generated program)...
1. I've checked the tables that the program are using... (a customized table with more than 20,000 entries and many others)
2. I've created secondary indexes to the main customized table with (20,000) entries - It improves the performance a bit(results about 18 minutes)...
3. I divided the report group by 4... 3 reports each report group... It greatly improves the performance... (but this is not what the client wants)...
4. I've read an article about report group performance that it is a bug.
(sap support recognized the fact that we are dealing with a bug in the sap standard functionality)
http://it.toolbox.com/blogs/sap-on-db2/sap-report-painter-performance-problem-26000
Anyone have the same problem as mine?
Edited by: christopher mancuyas on Sep 8, 2008 9:32 AM
Edited by: christopher mancuyas on Sep 9, 2008 5:39 AM
Report painter/Writer always creates a prerformance issue.i never preffred them since i have a option with Zreport
now you can do only one thing put more checks on selection-screen for filtering the data.i think thats the only way.
Amit.
Similar Messages
-
Report Painter Performance Issue
Helloo experts,
I have a report painter report which is pulling the data from a custom table (which has 32million records). Its taking a lot of time .
Is there any method to improve its performance ?Hi,
Please check report painter selecting records using primary key or secondary index. If not please create secondary index for custom table (after consultation with basis, due to creating the secondary index will increase the load on server of custom table with 32 millions records)
If not possible. extract the resultset from custom table into another table and make query for report painter on that. and update the new table on daily basis or hourly basis.
aRs -
Report program Performance problem
Hi All,
one object is taking 30hr for executing.some one develped this in 1998 but this time it is a big Performance problem.please some one helep what to do i am giving that code.
*--DOCUMENTATION--
Programe written by : 31.03.1998 .
Purpose : this programe updates the car status into the table zsdtab1
This programe is to be schedule in the backgroud periodically .
Querries can be fired on the table zsdtab1 to get the details of the
Car .
This programe looks at the changes made in the material master from
last updated date and the new entries in material master and updates
the tables zsdtab1 .
Changes in the Sales Order are not taken into account .
To get a fresh data set the value of zupddate in table ZSTATUS as
01.01.1998 . All the data will be refreshed from that date .
Program Changed on 23/7/2001 after version upgrade 46b by jyoti
Addition of New tables for Ibase
tables used -
tables : mara , " Material master
ausp , " Characteristics table .
zstatus , " Last updated status table .
zsdtab1 , " Central database table to be maintained .
vbap , " Sales order header table .
vbak , " Sales order item table .
kna1 , " Customer master .
vbrk ,
vbrp ,
bkpf ,
bseg ,
mseg ,
mkpf ,
vbpa ,
vbfa ,
t005t . " Country details tabe .
--NEW TABLES ADDEDFOR VERSION 4.6B--
tables : ibsymbol ,ibin , ibinvalues .
data : vatinn like ibsymbol-atinn , vatwrt like ibsymbol-atwrt ,
vatflv like ibsymbol-atflv .
*--types definition--
types : begin of mara_itab_type ,
matnr like mara-matnr ,
cuobf like mara-cuobf ,
end of mara_itab_type ,
begin of ausp_itab_type ,
atinn like ausp-atinn ,
atwrt like ausp-atwrt ,
atflv like ausp-atflv ,
end of ausp_itab_type .
data : mara_itab type mara_itab_type occurs 500 with header line ,
zsdtab1_itab like zsdtab1 occurs 500 with header line ,
ausp_itab type ausp_itab_type occurs 500 with header line ,
last_date type d ,
date type d .
data: length type i.
clear mara_itab . refresh mara_itab .
clear zsdtab1_itab . refresh zsdtab1_itab .
select single zupddate into last_date from zstatus
where programm = 'ZSDDET01' .
select matnr cuobf into (mara_itab-matnr , mara_itab-cuobf) from mara
where mtart eq 'FERT' or mtart = 'ZCBU'.
where MATNR IN MATERIA
and ERSDA IN C_Date
and MTART in M_TYP.
append mara_itab .
endselect .
loop at mara_itab.
clear zsdtab1_itab .
zsdtab1_itab-commno = mara_itab-matnr .
Get the detailed data into internal table ausp_itab .----------->>>
clear ausp_itab . refresh ausp_itab .
--change starts--
select atinn atwrt atflv into (ausp_itab-atinn , ausp_itab-atwrt ,
ausp_itab-atflv) from ausp
where objek = mara_itab-matnr .
append ausp_itab .
endselect .
clear ausp_itab .
select atinn atwrt atflv into (ausp_itab-atinn , ausp_itab-atwrt ,
ausp_itab-atflv) from ibin as a inner join ibinvalues as b
on ain_recno = bin_recno
inner join ibsymbol as c
on bsymbol_id = csymbol_id
where a~instance = mara_itab-cuobf .
append ausp_itab .
endselect .
----CHANGE ENDS HERE -
sort ausp_itab by atwrt.
loop at ausp_itab .
clear date .
case ausp_itab-atinn .
when '0000000094' .
zsdtab1_itab-model = ausp_itab-atwrt . " model .
when '0000000101' .
zsdtab1_itab-drive = ausp_itab-atwrt . " drive
when '0000000095' .
zsdtab1_itab-converter = ausp_itab-atwrt . "converter
when '0000000096' .
zsdtab1_itab-transmssn = ausp_itab-atwrt . "transmission
when '0000000097' .
zsdtab1_itab-colour = ausp_itab-atwrt . "colour
when '0000000098' .
zsdtab1_itab-ztrim = ausp_itab-atwrt . "trim
when '0000000103' .
*=========Sujit 14-Mar-2006
IF AUSP_ITAB-ATWRT(3) EQ 'WDB' OR AUSP_ITAB-ATWRT(3) EQ 'WDD'
OR AUSP_ITAB-ATWRT(3) EQ 'WDC' OR AUSP_ITAB-ATWRT(3) EQ 'KPD'.
ZSDTAB1_ITAB-CHASSIS_NO = AUSP_ITAB-ATWRT+3(14).
ELSE.
ZSDTAB1_ITAB-CHASSIS_NO = AUSP_ITAB-ATWRT . "chassis no
ENDIF.
zsdtab1_itab-chassis_no = ausp_itab-atwrt . "chassis no
*=========14-Mar-2006
when '0000000166' .
----25.05.04
length = strlen( ausp_itab-atwrt ).
if length < 15. "***aded by patil
zsdtab1_itab-engine_no = ausp_itab-atwrt . "ENGINE NO
else.
zsdtab1_itab-engine_no = ausp_itab-atwrt+13(14)."Aded on 21.05.04 patil
endif.
----25.05.04
when '0000000104' .
zsdtab1_itab-body_no = ausp_itab-atwrt . "BODY NO
when '0000000173' . "21.06.98
zsdtab1_itab-cockpit = ausp_itab-atwrt . "COCKPIT NO . "21.06.98
when '0000000102' .
zsdtab1_itab-dest = ausp_itab-atwrt . "destination
when '0000000105' .
zsdtab1_itab-airbag = ausp_itab-atwrt . "AIRBAG
when '0000000110' .
zsdtab1_itab-trailer_no = ausp_itab-atwrt . "TRAILER_NO
when '0000000109' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-fininspdat = date . "FIN INSP DATE
when '0000000108' .
zsdtab1_itab-entrydate = ausp_itab-atwrt . "ENTRY DATE
when '0000000163' .
zsdtab1_itab-regist_no = ausp_itab-atwrt . "REGIST_NO
when '0000000164' .
zsdtab1_itab-mech_key = ausp_itab-atwrt . "MECH_KEY
when '0000000165' .
zsdtab1_itab-side_ab_rt = ausp_itab-atwrt . "SIDE_AB_RT
when '0000000171' .
zsdtab1_itab-side_ab_lt = ausp_itab-atwrt . "SIDE_AB_LT
when '0000000167' .
zsdtab1_itab-elect_key = ausp_itab-atwrt . "ELECT_KEY
when '0000000168' .
zsdtab1_itab-head_lamp = ausp_itab-atwrt . "HEAD_LAMP
when '0000000169' .
zsdtab1_itab-tail_lamp = ausp_itab-atwrt . "TAIL_LAMP
when '0000000170' .
zsdtab1_itab-vac_pump = ausp_itab-atwrt . "VAC_PUMP
when '0000000172' .
zsdtab1_itab-sd_ab_sn_l = ausp_itab-atwrt . "SD_AB_SN_L
when '0000000174' .
zsdtab1_itab-sd_ab_sn_r = ausp_itab-atwrt . "SD_AB_SN_R
when '0000000175' .
zsdtab1_itab-asrhydunit = ausp_itab-atwrt . "ASRHYDUNIT
when '0000000176' .
zsdtab1_itab-gearboxno = ausp_itab-atwrt . "GEARBOXNO
when '0000000177' .
zsdtab1_itab-battery = ausp_itab-atwrt . "BATTERY
when '0000000178' .
zsdtab1_itab-tyretype = ausp_itab-atwrt . "TYRETYPE
when '0000000179' .
zsdtab1_itab-tyremake = ausp_itab-atwrt . "TYREMAKE
when '0000000180' .
zsdtab1_itab-tyresize = ausp_itab-atwrt . "TYRESIZE
when '0000000181' .
zsdtab1_itab-rr_axle_no = ausp_itab-atwrt . "RR_AXLE_NO
when '0000000183' .
zsdtab1_itab-ff_axl_nor = ausp_itab-atwrt . "FF_AXLE_NO_rt
when '0000000182' .
zsdtab1_itab-ff_axl_nol = ausp_itab-atwrt . "FF_AXLE_NO_lt
when '0000000184' .
zsdtab1_itab-drivairbag = ausp_itab-atwrt . "DRIVAIRBAG
when '0000000185' .
zsdtab1_itab-st_box_no = ausp_itab-atwrt . "ST_BOX_NO
when '0000000186' .
zsdtab1_itab-transport = ausp_itab-atwrt . "TRANSPORT
when '0000000106' .
zsdtab1_itab-trackstage = ausp_itab-atwrt . " tracking stage
when '0000000111' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_1 = date . " tracking date for 1.
when '0000000112' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_5 = date . " tracking date for 5.
when '0000000113' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_10 = date . "tracking date for 10
when '0000000114' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_15 = date . "tracking date for 15
when '0000000115' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_20 = date . " tracking date for 20
when '0000000116' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_25 = date . " tracking date for 25
when '0000000117' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_30 = date . "tracking date for 30
when '0000000118' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_35 = date . "tracking date for 35
when '0000000119' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_40 = date . " tracking date for 40
when '0000000120' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_45 = date . " tracking date for 45
when '0000000121' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_50 = date . "tracking date for 50
when '0000000122' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_55 = date . "tracking date for 55
when '0000000123' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_60 = date . " tracking date for 60
when '0000000124' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_65 = date . " tracking date for 65
when '0000000125' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_70 = date . "tracking date for 70
when '0000000126' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_75 = date . "tracking date for 75
when '0000000127' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_78 = date . " tracking date for 78
when '0000000203' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_79 = date . " tracking date for 79
when '0000000128' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_80 = date . " tracking date for 80
when '0000000129' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_85 = date . "tracking date for 85
when '0000000130' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_90 = date . "tracking date for 90
when '0000000131' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_95 = date . "tracking date for 95
when '0000000132' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_100 = date . " tracking date for100
when '0000000133' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_110 = date . " tracking date for110
when '0000000134' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_115 = date . "tracking date for 115
when '0000000135' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_120 = date . "tracking date for 120
when '0000000136' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_105 = date . "tracking date for 105
when '0000000137' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_1 = date . "plan trk date for 1
when '0000000138' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_5 = date . "plan trk date for 5
when '0000000139' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_10 = date . "plan trk date for 10
when '0000000140' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_15 = date . "plan trk date for 15
when '0000000141' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_20 = date . "plan trk date for 20
when '0000000142' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_25 = date . "plan trk date for 25
when '0000000143' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_30 = date . "plan trk date for 30
when '0000000144' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_35 = date . "plan trk date for 35
when '0000000145' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_40 = date . "plan trk date for 40
when '0000000146' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_45 = date . "plan trk date for 45
when '0000000147' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_50 = date . "plan trk date for 50
when '0000000148' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_55 = date . "plan trk date for 55
when '0000000149' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_60 = date . "plan trk date for 60
when '0000000150' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_65 = date . "plan trk date for 65
when '0000000151' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_70 = date . "plan trk date for 70
when '0000000152' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_75 = date . "plan trk date for 75
when '0000000153' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_78 = date . "plan trk date for 78
when '0000000202' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_79 = date . "plan trk date for 79
when '0000000154' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_80 = date . "plan trk date for 80
when '0000000155' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_85 = date . "plan trk date for 85
when '0000000156' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_90 = date . "plan trk date for 90
when '0000000157' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_95 = date . "plan trk date for 95
when '0000000158' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_100 = date . "plan trk date for 100
when '0000000159' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_105 = date . "plan trk date for 105
when '0000000160' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_110 = date . "plan trk date for 110
when '0000000161' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_115 = date . "plan trk date for 115
when '0000000162' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_120 = date . "plan trk date for 120
********Additional fields / 24.05.98**********************************
when '0000000099' .
case ausp_itab-atwrt .
when '540' .
zsdtab1_itab-roll_blind = 'X' .
when '482' .
zsdtab1_itab-ground_clr = 'X' .
when '551' .
zsdtab1_itab-anti_theft = 'X' .
when '882' .
zsdtab1_itab-anti_tow = 'X' .
when '656' .
zsdtab1_itab-alloy_whel = 'X' .
when '265' .
zsdtab1_itab-del_class = 'X' .
when '280' .
zsdtab1_itab-str_wheel = 'X' .
when 'CDC' .
zsdtab1_itab-cd_changer = 'X' .
when '205' .
zsdtab1_itab-manual_eng = 'X' .
when '273' .
zsdtab1_itab-conn_handy = 'X' .
when '343' .
zsdtab1_itab-aircleaner = 'X' .
when '481' .
zsdtab1_itab-metal_sump = 'X' .
when '533' .
zsdtab1_itab-speaker = 'X' .
when '570' .
zsdtab1_itab-arm_rest = 'X' .
when '580' .
zsdtab1_itab-aircond = 'X' .
when '611' .
zsdtab1_itab-exit_light = 'X' .
when '613' .
zsdtab1_itab-headlamp = 'X' .
when '877' .
zsdtab1_itab-readlamp = 'X' .
when '808' .
zsdtab1_itab-code_ckd = 'X' .
when '708' .
zsdtab1_itab-del_prt_lc = 'X' .
when '593' .
zsdtab1_itab-ins_glass = 'X' .
when '955' .
zsdtab1_itab-zelcl = 'Elegance' .
when '593' .
zsdtab1_itab-zelcl = 'Classic' .
endcase .
endcase .
endloop .
*--Update the sales data .--
perform get_sales_order using mara_itab-matnr .
perform get_cartype using mara_itab-matnr .
append zsdtab1_itab .
endloop.
<<<
loop at zsdtab1_itab .
if zsdtab1_itab-cartype <> 'W-203'
or zsdtab1_itab-cartype <> 'W-210'
or zsdtab1_itab-cartype <> 'W-211'.
clear zsdtab1_itab-zelcl.
endif.
SELECT SINGLE * FROM ZSDTAB1 WHERE COMMNO = MARA_ITAB-MATNR .
select single * from zsdtab1 where commno = zsdtab1_itab-commno.
if sy-subrc <> 0 .
insert into zsdtab1 values zsdtab1_itab .
else .
update zsdtab1 set :vbeln = zsdtab1_itab-vbeln
bill_doc = zsdtab1_itab-bill_doc
dest = zsdtab1_itab-dest
lgort = zsdtab1_itab-lgort
ship_tp = zsdtab1_itab-ship_tp
country = zsdtab1_itab-country
kunnr = zsdtab1_itab-kunnr
vkbur = zsdtab1_itab-vkbur
customer = zsdtab1_itab-customer
city = zsdtab1_itab-city
region = zsdtab1_itab-region
model = zsdtab1_itab-model
drive = zsdtab1_itab-drive
converter = zsdtab1_itab-converter
transmssn = zsdtab1_itab-transmssn
colour = zsdtab1_itab-colour
ztrim = zsdtab1_itab-ztrim
commno = zsdtab1_itab-commno
trackstage = zsdtab1_itab-trackstage
chassis_no = zsdtab1_itab-chassis_no
engine_no = zsdtab1_itab-engine_no
body_no = zsdtab1_itab-body_no
cockpit = zsdtab1_itab-cockpit
airbag = zsdtab1_itab-airbag
trailer_no = zsdtab1_itab-trailer_no
fininspdat = zsdtab1_itab-fininspdat
entrydate = zsdtab1_itab-entrydate
regist_no = zsdtab1_itab-regist_no
mech_key = zsdtab1_itab-mech_key
side_ab_rt = zsdtab1_itab-side_ab_rt
side_ab_lt = zsdtab1_itab-side_ab_lt
elect_key = zsdtab1_itab-elect_key
head_lamp = zsdtab1_itab-head_lamp
tail_lamp = zsdtab1_itab-tail_lamp
vac_pump = zsdtab1_itab-vac_pump
sd_ab_sn_l = zsdtab1_itab-sd_ab_sn_l
sd_ab_sn_r = zsdtab1_itab-sd_ab_sn_r
asrhydunit = zsdtab1_itab-asrhydunit
gearboxno = zsdtab1_itab-gearboxno
battery = zsdtab1_itab-battery
tyretype = zsdtab1_itab-tyretype
tyremake = zsdtab1_itab-tyremake
tyresize = zsdtab1_itab-tyresize
rr_axle_no = zsdtab1_itab-rr_axle_no
ff_axl_nor = zsdtab1_itab-ff_axl_nor
ff_axl_nol = zsdtab1_itab-ff_axl_nol
drivairbag = zsdtab1_itab-drivairbag
st_box_no = zsdtab1_itab-st_box_no
transport = zsdtab1_itab-transport
OPTIONS-
roll_blind = zsdtab1_itab-roll_blind
ground_clr = zsdtab1_itab-ground_clr
anti_theft = zsdtab1_itab-anti_theft
anti_tow = zsdtab1_itab-anti_tow
alloy_whel = zsdtab1_itab-alloy_whel
del_class = zsdtab1_itab-del_class
str_wheel = zsdtab1_itab-str_wheel
cd_changer = zsdtab1_itab-cd_changer
manual_eng = zsdtab1_itab-manual_eng
conn_handy = zsdtab1_itab-conn_handy
aircleaner = zsdtab1_itab-aircleaner
metal_sump = zsdtab1_itab-metal_sump
speaker = zsdtab1_itab-speaker
arm_rest = zsdtab1_itab-arm_rest
aircond = zsdtab1_itab-aircond
exit_light = zsdtab1_itab-exit_light
headlamp = zsdtab1_itab-headlamp
readlamp = zsdtab1_itab-readlamp
code_ckd = zsdtab1_itab-code_ckd
del_prt_lc = zsdtab1_itab-del_prt_lc
ins_glass = zsdtab1_itab-ins_glass
dat_trk_1 = zsdtab1_itab-dat_trk_1
dat_trk_5 = zsdtab1_itab-dat_trk_5
dat_trk_10 = zsdtab1_itab-dat_trk_10
dat_trk_15 = zsdtab1_itab-dat_trk_15
dat_trk_20 = zsdtab1_itab-dat_trk_20
dat_trk_25 = zsdtab1_itab-dat_trk_25
dat_trk_30 = zsdtab1_itab-dat_trk_30
dat_trk_35 = zsdtab1_itab-dat_trk_35
dat_trk_40 = zsdtab1_itab-dat_trk_40
dat_trk_45 = zsdtab1_itab-dat_trk_45
dat_trk_50 = zsdtab1_itab-dat_trk_50
dat_trk_55 = zsdtab1_itab-dat_trk_55
dat_trk_60 = zsdtab1_itab-dat_trk_60
dat_trk_65 = zsdtab1_itab-dat_trk_65
dat_trk_70 = zsdtab1_itab-dat_trk_70
dat_trk_75 = zsdtab1_itab-dat_trk_75
dat_trk_78 = zsdtab1_itab-dat_trk_78
dat_trk_79 = zsdtab1_itab-dat_trk_79
dat_trk_80 = zsdtab1_itab-dat_trk_80
dat_trk_85 = zsdtab1_itab-dat_trk_85
dat_trk_90 = zsdtab1_itab-dat_trk_90
dat_trk_95 = zsdtab1_itab-dat_trk_95
dattrk_100 = zsdtab1_itab-dattrk_100
dattrk_105 = zsdtab1_itab-dattrk_105
dattrk_110 = zsdtab1_itab-dattrk_110
dattrk_115 = zsdtab1_itab-dattrk_115
dattrk_120 = zsdtab1_itab-dattrk_120
pdt_tk_1 = zsdtab1_itab-pdt_tk_1
pdt_tk_5 = zsdtab1_itab-pdt_tk_5
pdt_tk_10 = zsdtab1_itab-pdt_tk_10
pdt_tk_15 = zsdtab1_itab-pdt_tk_15
pdt_tk_20 = zsdtab1_itab-pdt_tk_20
pdt_tk_25 = zsdtab1_itab-pdt_tk_25
pdt_tk_30 = zsdtab1_itab-pdt_tk_30
pdt_tk_35 = zsdtab1_itab-pdt_tk_35
pdt_tk_40 = zsdtab1_itab-pdt_tk_40
pdt_tk_45 = zsdtab1_itab-pdt_tk_45
pdt_tk_50 = zsdtab1_itab-pdt_tk_50
pdt_tk_55 = zsdtab1_itab-pdt_tk_55
pdt_tk_60 = zsdtab1_itab-pdt_tk_60
pdt_tk_65 = zsdtab1_itab-pdt_tk_65
pdt_tk_70 = zsdtab1_itab-pdt_tk_70
pdt_tk_75 = zsdtab1_itab-pdt_tk_75
pdt_tk_78 = zsdtab1_itab-pdt_tk_78
pdt_tk_79 = zsdtab1_itab-pdt_tk_79
pdt_tk_80 = zsdtab1_itab-pdt_tk_80
pdt_tk_85 = zsdtab1_itab-pdt_tk_85
pdt_tk_90 = zsdtab1_itab-pdt_tk_90
pdt_tk_95 = zsdtab1_itab-pdt_tk_95
pdt_tk_100 = zsdtab1_itab-pdt_tk_100
pdt_tk_105 = zsdtab1_itab-pdt_tk_105
pdt_tk_110 = zsdtab1_itab-pdt_tk_110
pdt_tk_115 = zsdtab1_itab-pdt_tk_115
pdt_tk_120 = zsdtab1_itab-pdt_tk_120
cartype = zsdtab1_itab-cartype
zelcl = zsdtab1_itab-zelcl
excise_no = zsdtab1_itab-excise_no
where commno = zsdtab1_itab-commno .
Update table .---------<<<
endif .
endloop .
perform update_excise_date .
perform update_post_goods_issue_date .
perform update_time.
*///////////////////// end of programe /////////////////////////////////
Get sales data -
form get_sales_order using matnr .
data : corr_vbeln like vbrk-vbeln .
ADDED BY ADITYA / 22.06.98 **************************************
perform get_order using matnr .
select single vbeln lgort into (zsdtab1_itab-vbeln , zsdtab1_itab-lgort)
from vbap where matnr = matnr . " C-22.06.98
from vbap where vbeln = zsdtab1_itab-vbeln .
if sy-subrc = 0 .
************Get the Excise No from Allocation Field*******************
select single * from zsdtab1 where commno = matnr .
if zsdtab1-excise_no = '' .
select * from vbrp where matnr = matnr .
select single vbeln into corr_vbeln from vbrk where
vbeln = vbrp-vbeln and vbtyp = 'M'.
if sy-subrc eq 0.
select single * from vbrk where vbtyp = 'N'
and sfakn = corr_vbeln. "cancelled doc.
if sy-subrc ne 0.
select single * from vbrk where vbeln = corr_vbeln.
if sy-subrc eq 0.
data : year(4) .
move sy-datum+0(4) to year .
select single * from bkpf where awtyp = 'VBRK' and awkey = vbrk-vbeln
and bukrs = 'MBIL' and gjahr = year .
if sy-subrc = 0 .
select single * from bseg where bukrs = 'MBIL' and belnr = bkpf-belnr
and gjahr = year and koart = 'D' and
shkzg = 'S' .
zsdtab1_itab-excise_no = bseg-zuonr .
endif .
endif.
endif.
endif.
endselect.
endif .
select single kunnr vkbur into (zsdtab1_itab-kunnr ,
zsdtab1_itab-vkbur) from vbak
where vbeln = zsdtab1_itab-vbeln .
if sy-subrc = 0 .
select single name1 ort01 regio into (zsdtab1_itab-customer ,
zsdtab1_itab-city , zsdtab1_itab-region) from kna1
where kunnr = zsdtab1_itab-kunnr .
endif.
Get Ship to Party **************************************************
select single * from vbpa where vbeln = zsdtab1_itab-vbeln and
parvw = 'WE' .
if sy-subrc = 0 .
zsdtab1_itab-ship_tp = vbpa-kunnr .
Get Destination Country of Ship to Party .************
select single * from kna1 where kunnr = vbpa-kunnr .
if sy-subrc = 0 .
select single * from t005t where land1 = kna1-land1
and spras = 'E' .
if sy-subrc = 0 .
zsdtab1_itab-country = t005t-landx .
endif .
endif .
endif .
endif .
endform. " GET_SALES
form update_time.
update zstatus set zupddate = sy-datum
uzeit = sy-uzeit
where programm = 'ZSDDET01' .
endform. " UPDATE_TIME
*& Form DATE_CONVERT
form date_convert using atflv changing date .
data : dt(8) , dat type i .
dat = atflv .
dt = dat .
date = dt .
endform. " DATE_CONVERT
*& Form UPDATE_POST_GOODS_ISSUE_DATE
form update_post_goods_issue_date .
types : begin of itab1_type ,
mblnr like mseg-mblnr ,
budat like mkpf-budat ,
end of itab1_type .
data : itab1 type itab1_type occurs 10 with header line .
loop at mara_itab .
select single * from zsdtab1 where commno = mara_itab-matnr .
if sy-subrc = 0 and zsdtab1-postdate = '00000000' .
refresh itab1 . clear itab1 .
select * from mseg where matnr = mara_itab-matnr and bwart = '601' .
itab1-mblnr = mseg-mblnr .
append itab1 .
endselect .
loop at itab1 .
select single * from mkpf where mblnr = itab1-mblnr .
if sy-subrc = 0 .
itab1-budat = mkpf-budat .
modify itab1 .
endif .
endloop .
sort itab1 by budat .
read table itab1 index 1 .
if sy-subrc = 0 .
update zsdtab1 set postdate = itab1-budat
where commno = mara_itab-matnr .
endif .
endif .
endloop .
endform. " UPDATE_POST_GOODS_ISSUE_DATE
*& Form UPDATE_EXCISE_DATE
form update_excise_date.
types : begin of itab2_type ,
mblnr like mseg-mblnr ,
budat like mkpf-budat ,
end of itab2_type .
data : itab2 type itab2_type occurs 10 with header line .
loop at mara_itab .
select single * from zsdtab1 where commno = mara_itab-matnr .
if sy-subrc = 0 and zsdtab1-excise_dat = '00000000' .
refresh itab2 . clear itab2 .
select * from mseg where matnr = mara_itab-matnr and
( bwart = '601' or bwart = '311' ) .
itab2-mblnr = mseg-mblnr .
append itab2 .
endselect .
loop at itab2 .
select single * from mkpf where mblnr = itab2-mblnr .
if sy-subrc = 0 .
itab2-budat = mkpf-budat .
modify itab2 .
endif .
endloop .
sort itab2 by budat .
read table itab2 index 1 .
if sy-subrc = 0 .
update zsdtab1 set excise_dat = itab2-budat
where commno = mara_itab-matnr .
endif .
endif .
endloop .
endform. " UPDATE_EXCISE_DATE
form get_order using matnr .
types : begin of itab_type ,
vbeln like vbap-vbeln ,
posnr like vbap-posnr ,
end of itab_type .
data : itab type itab_type occurs 10 with header line .
refresh itab . clear itab .
select * from vbap where matnr = mara_itab-matnr .
itab-vbeln = vbap-vbeln .
itab-posnr = vbap-posnr .
append itab .
endselect .
loop at itab .
select single * from vbak where vbeln = itab-vbeln .
if vbak-vbtyp <> 'C' .
delete itab .
endif .
endloop .
loop at itab .
select single * from vbfa where vbelv = itab-vbeln and
posnv = itab-posnr and vbtyp_n = 'H' .
if sy-subrc = 0 .
delete itab .
endif .
endloop .
clear : zsdtab1_itab-vbeln , zsdtab1_itab-bill_doc .
loop at itab .
zsdtab1_itab-vbeln = itab-vbeln .
select single * from vbfa where vbelv = itab-vbeln and
posnv = itab-posnr and vbtyp_n = 'M' .
if sy-subrc = 0 .
zsdtab1_itab-bill_doc = vbfa-vbeln .
endif .
endloop .
endform .
*& Form GET_CARTYPE
form get_cartype using matnr .
select single * from mara where matnr = matnr .
zsdtab1_itab-cartype = mara-satnr .
endform. " GET_CARTYPEHi,
I have analysed your program and i would like to share following points for better performance of this report :
(a) Use the field Names instead of Select * or Select Single * as if you use the field names it will consume less amount of resources inside the loop as well as you have lot many Select Single * and u r using very big tables like VBAP and many more.
(b) Trace on ST05 which particular query is mostly effecting your system or use ST12 in current mode to trace for less inputs which run the report for 20-30 min so that we get an idea which queries are effecting the system and taking a lot of time.
(c) In Case of internal tables sort the data properly and use binary search for getting the data.
I think this will help.
Thanks and Regards,
Harsh -
Report Painter Execution Problem
Hi,
I am working on Report Painter in which i am facing a problem that when i execute the Tcode GR55 and fill the Group Name in it ,if there is only 1 report in it ,it gets executed but when there are more than 1 report in it ,some times it gets executed ot sometimes it does not.
I want to know how can i execute a selected indiviual report when there are about number of reports present in the library assigned to that group.
Please provide me guidelines for solving this problem.
Edited by: ricx .s on Jul 24, 2009 10:10 AMHi,
The reports in a report group are executed at the same time, so that in the report display you can switch between the individual reports.
Thanks. -
Report painter formatting problem
Hi
I was working on a report in GR32 and seems screwed up.Now the report's decimal is not coming up.When I goto formating and select the decimal option , decimal comes up but spacing between columns get affected.Can anybody tells me how to fix the formating issue of columns. I mean adding decimal,comma and space between columns ?
Thanks
Satyai am explainig for report painter reports ( similar way must be there for report writer)
go to grr2
you will see on top of the columns 'format group : 0' written.
when you go to formatting -> columns you will seee a format group on the top and below you will see the width , decimal places etc.
say you want to have column a very wide and column B needs to be filled with only one or 2 numbers then on top of column A you can the format group to 0. Then click on formatting-> columns and make the widht eg 20.
for column B on top of the column change the format group to 1. Then go to formatting -> columns then select the format group as 1 and then make the width to 2.
This way you can have different widths, decimals etc for differenet columns
Assign points if helfpfull,
Regards,
Zaid Azam -
Report Painter language problem
Hi,
When we logon to Report painter Reports in Polish Language, the report is not displayed in Polish Language.. but English language..
I have checked the following:-
1. PL language is maintained in GCRS T-Code.
2. The concerned GL also appears in SKAT table in PL language.
3. I have also executed GR59 to import it from Source client 000
4. Also executed GR55 to execute the report group.
5. Also checked SAP Note No. 719246.
The GL's despite that appears in English language and not in Polish Language.. Any idea what can be done to get the display in Polish language.
Regards,
SAPFICOReport painter/Writer always creates a prerformance issue.i never preffred them since i have a option with Zreport
now you can do only one thing put more checks on selection-screen for filtering the data.i think thats the only way.
Amit. -
Report painter formula problem
Hi
we are getting the error when generating the report painter report that " Formula too long to be converted".
does anyone has idea about this issue.
Thankshi,,
u can break up the formula n calculate it .
the variables are available within the structure of ur operating concern..
so u can plan ur formaulations accordingly...
regards
priyaraj -
Crystal Reports XIR2 performance problem with Sybase IQ 15.2
Dear all,
we are facing a performances pb with Crystal reports and Sybase IQ 15.2, Does anyone have a similar issues and have a solution as ( design , or sybase IQ configuration...)
regards,
EricWow, not so much info please... for starters:
Is this in the designer or in an app?
Depending on the above, the following may, or may not apply:
What are you comparing the performance to?
What is the exact version of CR or what CR Service Packs have you applied?
If in an app , what your development language?
What CR SDK are you using?
Web or Win app?
How are you connecting to the database (OLE DB, ODBC, etc .)?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
I have a report which has many columns related to cost center.It has so many fields like current year actual ,standard cost etc.We want to add one more column to the report (prior year actual) and also a variance of current year - prior year actual.Guys I am zero in report side.But willing to learn.Can any body guide me how to open this report in edit mode and add 2 columns to this ?
reply deserves maximum rewards.
Thanks
SNGo to GRR2. Enter your Library and report you want to change. Select the columns button. Place cursor in the colmn where you want it to go. Double click. Pick your element type Key figure formula etc. Save changes and run execute to test.
pls assign points to say thanks. -
How should I report forum performance issues?
The forums rely heavily on the caching features of browsers to improve the speed of page rendering. Performance of these forums should greatly improve after a few pages because more and more of the images, css and javascript is cached in the browser. As a consequence, when reporting forums performance issues the report should include some information on the state of the browser cache to determine whether the issue is a browser issue or a server issue. Such detailed information is generally not available from just watching the browser screen, but needs to come from specialized tools such as performance monitor plugins and recording proxies.
The preferred report method for performance issues is to use the speed reporting features build into or available as a plugin for a browser for both the page you want to report a problem with and several refence pages in the site. Detailed instructions are listed below separated out for different browsers. If possible, please use Firefox for submitting the report because it provides an export format that can be read back electronically.
Known performance issues
The performance issues with any screen with a Rich Text Editor, such as the Reply window and the compose Private Message window have been acknowleged and improvements are being implemented.
Mozilla Firefox (preferred)
Warning: it is currently not recommended to generate a speed report when logged in. The speed report has enough detail for somebody else to hijack your session and impersonate you on the forums. If you really must report while logged in, make sure you log out your browser after generating the speed report and wait at least 4 hours before posting.
Install the Firebug plugin
Install the NetExport 0.6 extension for Firebug
Enable all Firebug panels
Switch to the "Net" panel in Firebug
Click on this link
Export the data from the Firebug Net panel
Click on this link
Export the data from the Firebug Net panel
Browse to the page where you are experiencing the performance problem.
Export the data from the Firebug Net panel
Click on this link
Export the data from the Firebug Net panel
Click on this link
Export the data from the Firebug Net panel
Browse to the page where you are experiencing the performance problem.
Export the data from the Firebug Net panel
When you report a performance problem please attach the 6 exports from the Firebug Net panel and an explanation of how you are experiencing the issues (for instance how much slower it is then normal) and include a description of your internet connection (dial-up, dsl, cable etc.) and the country from where you are connecting. If you have non-standard tweaks to your Firefox configuration (such as pipelining enabled) or are running any plugins please include that information in your report as well.
Google Chrome
Open the Developer Tools (Ctrl-Shift-J)
Navigate to the resources tab
Enable resource tracking.
Click on this link
Export the resource loading data.
Reset the data by disabling and enabling resource tracking
Click on this link
Export the data
Reset the data by disabling and enabling resource tracking
Navigate to the page where you experience the performance problem
Export the data
Reset the data by disabling and enabling resource tracking
Click on this link
Export the data
Reset the data by disabling and enabling resource tracking
Click on this link
Export the data
Reset the data by disabling and enabling resource tracking
Navigate to the page where you experience the performance problem
Export the data
Since Google Chrome does not have an export format for the Resource Tracking information best current practice is to take a screenshot and note the hover details for any resource with a tail that is longer then 25% of the total load time. When you report a performance problem please attach the screenshots and an explanation of how you are experiencing the issues (for instance how much slower it is then normal) and include a description of your internet connection (dial-up, dsl, cable etc.) and the country from where you are connecting.
Apple Safari
The Apple Safari Web Inspector has a Resources panel similar to the Resources panel in the Google Chrome developer tools.To get there, follow these steps:
Show the menu bar.
Go to preferences
Go to the Advanced Tab
Check “Show Develop menu in menu bar”.
From the Develop menu select “Show Web Inspector”.
Collecting the performance information and exporting works exactly the same as in Google Chrome. Please refer to the instructions for Google Chrome.
Microsoft Internet Explorer
IE does not have native features to analyze web traffic. No plugins have been found that produce the required information (please let us know if we missed any). For now, please reproduce the issue with Firefox, Chrome or Safari.
Please note that due to the reliance on Javascript for the interactive effects the performance of these forums will be much better on MS IE 8 then on previous versions of MS IE.Hi
It works, check once again...
regards
Swami -
Report Painter Report Performance Issue
hi,
My client facing the problem with Report painter reports , almost all the reports taking much amount of time to execute . we are Using 5.0 version tables FAGLFLEXT and CSSS . i have some doubts report index is the cause for this or any other reasons can any one help me in this regard,
thanks in advance
sasidhar.AHi,
just create a proper index and performance will increase. There are some SAP OSS notes who deal with this (for example field "client" should be added if'm not mistaken).
We did the same on profit center tables with huge performance increases
grtz
dries -
Problem in Exporting a Report Group having a Report Painter Report.
I am having a problem in exporting a Report group having a Report Painter report.When I am trying to export the Report Group using transaction GR57 with all dependent objects,it is displaying:
group 0102CPDNUEA-CCROSI not transported.
Transport groups separately if necessary.
There are 6 such groups which are not transported.Can anybody help me in this regards.Can anybody help me in exporting these Groups.Specifically in Report painter reports what do these Groups signify and how can we see them.Please help me....hi,
I am able to export my report groups with dependent objects successfully.
I dont know why you are getting error message. Just keep break point at ***** and execute it for single group and find out why it is giving error.
IF SY-BATCH = 'X' OR NO_LIST = 'X'. "direct or batch
SET PF-STATUS 'LIST'.
*****PERFORM TRANSPORT_OBJS USING 'X'. "transport all jobs
IF FILE_EXP <> 'X'.
READ TABLE WT_E071 INDEX 1.
IF SY-SUBRC = 0.
LEAVE.
ENDIF.
ENDIF.
ELSE. "online
SET PF-STATUS 'MENU'.
PERFORM WRITE_TRANSP_OBJS.
ENDIF.
regards,
ram -
Performance problem in Zstick report...
Hi Experts,
I am facing performance problem in Custoom Stock report of Material Management.
In this report i am fetching all the materials with its batches to get the desired output, at a time this report executes 36,000 plus unique combination of material and batch.
This report takes around 30 mins to execute. And this report is to be viewed regularly in every 2 hours.
To read the batch characteristics value I am using FM -> '/SAPMP/CE1_BATCH_GET_DETAIL'
Is there any way out to increase the performance of this report, the output of the report is in ALV.
May i have any refresh button in the report so that data may get refreshed automatically without executing it again. or is there any cache memory concept.
Note: I have declared all the itabs with type sorted, all the select queries are fetched with key and index.
Thanks
Rohit GharwarHello,
SE30 is old. Switch on trace on ST12 while running this progarm and identify where exactly most of the time is being spent. If you see high CPU time this problem with the ABAP code. You can exactly figure out the program/function module from ST12 trace where exactly time is being spent. If you see high database time in ST12, problem is with database related issue. So basically you have to analyze sql statement from performance traces in ST12. These could resolve your issue.
Yours Sincerely
Dileep -
SQL report performance problem
I have a SQL classic report in Apex 4.0.2 and database 11.2.0.2.0 with a performance problem.
The report is based on a PL/SQL function returning a query. The query is based on a view and pl/sql functions. The Apex parsing schema has select grant on the view only, not the underlying objects.
The generated query runs in 1-2 sec in sqlplus (logged in as the Apex parsing schema user), but takes many minutes in Apex. I have found, by monitoring the database sessions via TOAD, that the explain plan in the Apex and sqlplus sessions are very different.
The summary:
In sqlplus SELECT STATEMENT ALL_ROWS Cost: 3,695
In Apex SELECT STATEMENT ALL_ROWS Cost: 3,108,551
What could be the cause of this?
I found a blog and Metalink note about different explain plans for different users. They suggested to set optimizer_secure_view_merging='FALSE', but that didn't help.Hmmm, it runs fast again in SQL Workshop. I didn't expect that, because both the application and SQL Workshop use SYS.DBMS_SYS_SQL to parse the query.
Only the explain plan doesn't show anything.
To add: I changed the report source to the query the pl/sql function would generate, so the selects are the same in SQL Workshop and in the application. Still in the application it's horribly slow.
So, Apex does do something different in the application compared to SQL Workshop.
Edited by: InoL on Aug 5, 2011 4:50 PM -
Interactive report performance problem over database link - Oracle Gateway
Hello all;
This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
query like this: (due to sensitivity issue, I can not disclose real table name)
SELECT apex_item.checkbox(1,b.col3)
, a.col1
, a.col2
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5
table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
I would like to get ideas from people how to resolve or speed-up the query?
Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
Thank you.
Shaun S.Hi Shaun
Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two),
sourceqry AS
(SELECT b.col3 x
, a.col1 y
, a.col2 z
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5)
SELECT apex_item.checkbox(1,x), y , z
FROM sourceqry
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two)
SELECT apex_item.checkbox(1,x), y , z
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
Sorry for all the questions but it helps to answer the question, if I can.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Maybe you are looking for
-
How to get a temporary pin number to my primary email apple ID cause i can not access to my icloud cause i forgot password and answers to the security questions, neither key nor two steps.
-
HI ALL MY problem is that how can we print sale order and delivery no on a/r invoice . we can print base docnum but we want both no so and delivery . Let we create a sales order no is 19 and through it we create deliver note no 25 and through del
-
Run report in Oracle Application from command line
Hi All, I have a requirement that i have to generate a report through command line and save the output as pdf in a folder on the server. How can i achieve this task. Is any body have some idea plz reply quickly. We have a UAT at 10th of this month. T
-
Resizing a logical partition with a LUKS container
I have a logical partition that contains LUKS which holds an LVM2 schema. My goal is to resize the existing logical partition so I can create other partitions in their own LUKS-encrypted container. So far, the LVM2 PV is resized and I'm looking for
-
Hello everyone, As i said in subject, I have a problem with a DATE formula. It's funny I think but it may be a little problem in the future. My date which should be ok is not. Year and month is ok but day is tricky because I have to put an expression