Report Painter - Report not displaying all values

Hi All,
We are executing a report for Manufacturing variances by Product group which is created through report painter.
In the output of the report in rows product wise data is displayed and columns are volume, price .. are there.
Out of 8 products displayed in the report for one product volume is being displayed blank. But when I double click it is displaying actual line items,
Can you please let me know why for one product it is showing blank inspite of data existing.
Thanks
Satish

So the report is actually showing undeterminable values..
this is the prblem
Ex in the report
Col1    500 USD
Col 2   200 USD
Col 3   300 USD
Col4    100 EUR
Col5    300 USD
In this case the system cannot show the total figure for the amount row because one of the amount is in EUR. So it shows a Black X in the EUR cell.
That is the reason why you wont get this problem for one single company code but get this for multiple company codes.
To avoid this use controlling area currency as the key figure so that all will be translated into one currency. Or unit of measure if you are dealing with quantities.
Thanks
Naveen

Similar Messages

Filter not displaying all values

When I attempt to filter a product code. the drop down list (under heading Expression) displays about 100 codes when in reality there are about 2000 values.
I have changed the Maximum Rows per Page under Search Bar to 2000, but this still does not display all the codes.
Is there a setting I am missing?

I think that your description of the problem doesn't help a lot. Are you using interactive reports?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Crystal Report V9 do not display decimal value HELP!

I have a field in Informix data type is Decimal(6,2)when i used the field in the report, the decimal is not displayedexample: field1 = 305.50, in crystal report it only displayed 305.00, already setup the formatting. any possible solution?, please help!

have check all the options in my pc and crystal report, all seems to be ok, and have tried displaying an informix field decimal(5,2), and it displays ok (154.23) in my crystal report, but when trying to display the field decimal(6,2) crystal report display decimal up to 99.99, but when it reaches 100+, it will not display the decimal, very weird, help.have tried the formula as well but still doesnt work.any other possible solutions, pls help, thanks.

Report not displaying all values

Experts,
I am accessing BW report through portals .I have a variable with drop down box in my report .When i click on the drop down box ,it is not showing only 200 values .
but user want to see all 500 values in that drop down box.Is there any way to increase max no of hits.
Any advice appreciated .
Thanks
Mano

Manohar,
 try this code and let me know... directly insert this code in HTML or In the properties of the Drop Down Web Item you could see "Maximum Number of the Displayed Values" assign this 0 in the Properties.
or insert the cod ein HTML block:
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="DROPDOWNBOX_1"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
 <param name="MAXVALUES" value="0"/>
ITEM: DROPDOWNBOX_1
</object>
all the best.
try this code and let me know.
Regards,
Nagesh Ganisetti.

PC report S_E38_98000088 does not display periodic values

Dear colleagues,
In ECC6.0/new GL we are trying to use report S_E38_98000088 to display Actual/Plan values for a specific month/period, but it looks like the system will always show a cumulative value since the beginning of the fiscal year.
We enter the following on the selection screen:
Currency type: 10
Company code: XXXX
Account number: XXXXXXXX
Ledger: 0L
Controlling area: XXXX
Plan version: 1
Fiscal year: 2011
From Period: 4
To period: 4
Profit Center: XXXXXXX
But when we execute the report, and srill down to the line item level, we see that the report picks up all posting in 2011 instead of 04.2011 only.
The same happens if we try to execute the report for 12.2010 - it will select all postings in 2010.
Anyone knows why is it working like that and how can I display a specific period?
Many thanks,
Yoel.

Shalom yoel,
this is not a bug.
Please bear in mind that this report shows cumulative values
for Balance Sheet accounts.
The calculated keyfigure BILWERT (Balance Sheet Value) behaves in
different ways for balance sheet and for P+L accounts. For balance sheet
accounts it always provides you with cumulated values. For example
for period 6 to 6 it will show cumulated value for periods 1 - 6 plus
balance carry forward value.
The BILWER is calculated like:
BILWERT = WERTB + WERTE,
WERTB - Balance sheet accounts value
WERTE - Income statement account value
But if an account is a P+L statement account, you will see the
real period balance value for the particular period range. It means,
that for period 6-6 you will see value for the single period 6. For
period 1-6 you will see cumulated value for period range 1 - 6 without
balance carry forward.
The report behaviour is dependent on your Financial Statement Version
(FSV) and how the particular accounts are valuated.
It means the following:
~~~~~~~~~~~~~~~~~~
1) All accounts assigned to the nodes "Assets" and "Liab+Equity" are
   taken as balance sheet accounts and cumulated values are provided
   for those accounts by report S_PL0_86000028 (and other GL reports)!!
2) All accounts which are not assigned within the FSV at all are
   considered as balance sheet accounts and cumulated values are
   provided by GL drilldown reports.
3) All accounts which are assigned OUT of "Assets" and "Liab+Equity"
   nodes within particular FSV are taken as Profit and Loss acounts and
   period values are provided for them in the GL drilldown reports
The original settings (which you can see under T-cd: FS00) has no
influence on it when using the FI-GL drilldown reports.
Please take into account the note 1154817 and the documentation
to OB58 and RFBILA00 how should define the correct FSV structure.
That is the design and usage of the hierarchy of the Financial Statement
Version and key figure.
There is no error in the standard system
br, Guido

Parameters not displaying all values

Hi,
I have a parameter on a Discoverer report for selecting where the absence category is in a list of values. However, the list of values that you are able to select from is not complete, it's only a partial list. But if you type the values in manually it works fine.
Does anyone have any idea why the list of values is excluding many of the entries?
Thanks,
Dan

I think that your description of the problem doesn't help a lot. Are you using interactive reports?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Presentation Variable - Display 'All Values' in Report Title

If I create a Dashboard Prompt and then set it equal to a Presentation Variable, I then display this Presentation variable in the report title. For the Dashboard Prompt I allow them the 'All Values' choice, in fact, this is the default.
The issue is displaying this in the Report Title, when it is 'All Value' nothing is display in the title, when they select a value such as 'Region D' then it works and this value will dispaly.
I looked at the documentation and it says you can use a default value, however, setting up that still does not work. It still is blank.
Has anyone seen this issue or know of a workaround? I'd like to have something like 'All Vales' display or is there a condition I could write to set this.
Thanks

Hi Guys,
I have did the following in order to achieve your requirement:
As usual, create a request with a column prompted and a dashboard prompt containing that column and set the Presentation Variable (ex: varDept)... bla bla..
Placed them on the Dashboard to generate your issue, discussed...
Now, what I have did is:
1. Created one more Request with the column used on Prompt and specified the Formula to it as:
CASE WHEN '@{Dept}'||'A'='A' THEN 'All Departments' ELSE '@{Dept}' END
Note: Take 2 same columns (and hide one) because we are using above formula which does not contains the Column from any table.
2. Created Narrative View and referenced the above Column.. @2 (in my case).. and specify 1 in 'Rows to Display' field. Do the formatting as required viz., specifying Font size, family....
3. Place this request in between the Prompt and First Request..
Now, you can able to see 'All Departments' if 'All Choices' is selected.
Hope this idea will helps you guys..
Regards,
-Vency

Issue in GR55 report painter report not able to pass Exclusive values (E)

Hi all,
According to client requirement we have added selection values in P&L Report Painter report.
We have an issue we can only select data/range of data that we want to include(sign = I -inclusive) in the report. I cannot exclude values(sign = E - Exclusive).The error message get is as follows.
Message no GR107
Diagnosis:
You can enter intervals or single values fo certain fields.The system only supports inclusive intervals(Opertaors BT I) or inclusive single values(operators EQ I).
We found that its standard behaviour..Is there any SAP note to come over this or any other solution....
Regards,
Greeshma.

Not possible....SAP standard behaviour....

Aging Report not displaying all BP's

Experts,
I have a client who recently upgraded to 8.8 PL 10. They found that when running the Customer Aging report they did not see all the customers in the list. Even customers with a balance.
I have looked into this and found some confusing results... I make sure that there is no selection on the Customer Codes or groups and that there is only one accounts receivable in the Control account selection (They only have one). With this selection I sometimes got all the customers and sometimes not. I could not determine a common factor.
Is this an issue with 8.8 PL 10?
Any help wold be appreciated.
Marli

Gordon,
Yes, I tried with the Display customers with zero balance selected. Then I could see all the customers.
But the specific customer that did not show up when this was not selected have a balance.
Thanks,
Marli

Zero balance display in report painter reports

Hi all,
I have an issue with some report painter reports where the "print zero balances" flag is switched on in both the report and the section layouts, however the accounts are still not appearing on the report.
The accounts do not have any postings in the current year and the Bal carried fwd was zero in all profit centres but my client would still like to see a zero value on the report. Any suggestions?
Many thanks
Phil.

Also, when I display the balance of the accounts that appear on the report in FAGLB03, I get a screen showing a zero balance in all periods.
When I display the balance of the accounts which do not appear on the report in FAGLB03, i get the message that "no data exists for fiscal year 2009".
I have tried re-running the balance carry fwd transaction but this has had no affect.
please help!
Thanks
Phil.

Display Profit Center & GL Account in 2 Seperate Columns in Report Painter Report

Hello All,
I am building a Report Painter Report for Inventory Balances. As psrt of my requirement I have to display GL Account & Profit Center ina different Column & their Balances for each month on this Current Fiscal Period. As/of now I am only able to have both GL Account & Profit Center in the Same Lead Column? And it is perfect if I look on the Report but when I download all the GL Account & Profit Center are not seperated with Color, so it becomes confusing. I need to have execlty the Report as Same Format S_PL0_86000030.
How can this be achievable? Thanks for your valuable input?

the account is probably in account group or set. Look for that one in report painter and then go to the set or account group and remove/add the account.

Zero balance account is not dispalyed in Report painter report

Hi Friends,
We have devloped a Balance sheet report with report painter drill down feature (Transactions codes FSI1 ande FSI4).
When we run this report zero balance accounts are not shown. Clinet requested to have all GL accounts in report.
Could any one please help me in this issue.
Thanks,
Venky

Hi,
The report painter will not bring the zero balance account. Because it pulls out values from the FLAGFLEX table which does not have the zero balance account. So it is adviceable to create a report for the same.
Thanks & Regards,
Neela

Report Painter - data not shown at first selection

Hello,
we have a Report Painter report for cost centers.
If we start the report with normal selection the values of the cost centers are not shown at the first look.
The window on the right side only shows the sum for the whole cost center group, but if we select one single cost center the report shows
"This report has no pages. Check the following layout settings: Threshold values, Summation levels, Zero line suppression."
But there are values, but they are only shown if we switch to another cost center and then switch back.
All rows that are selected the first time show no values, at the second time the values are there.
Does anybody know the reason for this?
Thank you & regards
Britta

Hello,
starting the report with the selection of a cost center group.
This group is shown on the left side, the values in sum of the right side.
To have a detailled look on the single values of the cost centers I expand the cost center group by clicking on the small triangle, all included cost centers are now showns on the left side.
To see the value of a cost center I click on the respective cost center, on the right side the "no data" information is shown.
Clicking on the next cost center also the "no data" information is shown.
Now switch back to the first cost center on the left side and then the values are shown on the right side.

Selection values in Report Painter Report

Hi All,
I am creating a report painter report for Plan/Actual values using library 0FL.In my characteristic value column I included fiscal year as a value and hard coded the fiscal year so i dont need this parameter in my selction screen.When I execute the report the fiscal year is coming in the selection twice.i.e:
Fiscal Year
Fiscal Year
Company Code
Period
From Profit Center
To Profit Center
How do I wipe out this fiscal year from my selection screen? In GRR2 -> EDIT--> General data selection , I only have profit center values.I dont know why this fiscal year is coming up as a selction parameter when I hard coded in the column.Any help.Thanks
Regards
Shaun

HI Shaun
In GRR2, Against the char, there is a check box where in you specify to treat it as a variable.. DId you check that box? Unless you check that, it wont appear in the selection screen
Regards
Ajay M

Create report in orde to display all pending orders on basis of "CODE"

Hi ,
I need to create report in orde to display all pending orders on basis of "CODE" ( e.g RC , VP ext) given on selection screen.
This "Code" field is on tcode Me23n inside tab "Release strategy".What is table and relation to fetch ebeln on basis of CODE(e.g RC)
Regards.

Hello,
In SQL Server Reporting Services (SSRS), by default, the chart will only display axis labels for data points in the dataset that contain valid values. Also, if we have values of 1, 2, and 6 on the category axis, we can specify the chart to use a scalar axis
to maintain the scale of category values. It is add numeric or date/time values to the axis where no data grouping values exist.
You can refer to the steps below:
1. Right-click X-Axis, select Horizontal Axis Properties.
2. Select “Scale(Number/Dates)” below “Axis type:”. Configure “Axis range and interval” as you require.
You can refer to the screen shots below:
Preview the report:
There is an article about Formatting Axis Labels on a Chart, you can refer to it.
http://technet.microsoft.com/en-us/library/dd239363.aspx
Regards,
Alisa Tang
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Report Painter - Report not displaying all values

Similar Messages

Maybe you are looking for