Report Painter - Values not displaying
I have a report created in Report Painter using Library 1GK that shows the total units. When I run the report for all cost centers the data does not display. I can explode the row and see the values but not total. I can export the data and the values export. This happens for both units and hours. Any ideas?
Thank you!
Helen
Please check the Section layout for your report and review the Rows tab. The Miscellaneous area has Mark Totals and Suppress duplicated totals. Treatment of zero rows can also be checked, may be the total of debits and credit of individual rows are totalling to zero. Just a guess.
Similar Messages
-
COOIS- Report Grid Value not displaying
Hi Experts,
In COOIS report Prd Order item details , the grid values and stock category are not displaying values. we created the production order with AFS grid but while seeing report of item details the grid values and stock category are showing null values.
initial screen,
Report
but production order contains grid values.
any one guide me to resolve it.
Regards,
Thangam.P
Message was edited by: Thangam PerumalHi ,
my requirement is need to show the grid value and stock category of AFS production order based on item details. i think that alv reports is working based on view. it is possible to add custom view for that report? . if possible mean to any one guide me to fix the problem.
Regards,
Thangam.P -
Report Painter : Value not collapsing
Hello Friends,
I have an issue with report painter. In the report group ( GRR1 ), I have I have defined an element as total, and have set the final field as "explode". But when I execute the report the said heading does not have any '+' symbol and neither does it expand ( ie explode ).
Appreciate a quick response.
Regards,
ThimmaiahTo collapse a row, proceed as follows.
1. Call the report you've created in change mode using t.code: GRR2 or GR32
2. Next select the row you want to collapse
3. Click on Formatting on the menu bar and then click on collapse to
4. In the pop-up screen, select the level you want to collapse to. Normally, I use 02 -Asterisk Level
The above should resolve the issue with collapse.
Next, to be able to explode an account, such an account must be defined as a set. Meaning you have different accounts under a set. For example: You may have accounts: 30003, 40000, 50000, 575757, 434343, under a set called OPERATINGEXP. It is this set that you would explode. You cannot explode an individual account number.
Hope the above explanation gives you an idea as to how to proceed
Regards,
Elias -
Value not displaying in report whereas it returns in plsql developer
HI
Duplicate post.
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer -
SCCM 2012 R2 - Software metering Reports Parameters Value not appear to choice
Hello Every Body
I hope to get answer as soon as possible
I have SCCM 2012 R2 & SQL Server 2012 SP1, my problem is ( all software metering Reports Parameters Values Not appear so I cannot select
Note:-
( All parameters Available Value set to Get Values From a Query)Has it been over 45 days since you created the active SWM rules? Do all (most) other SWM reports
work?
all other reporting in SWM which doesn't ask for month and year working
only the problem in year & Month Parameters Values
note:-
these reports doesn't need a 45 days to work, alwasy when i install SCCM reports working only from the second day of installation -
Report Painter values are not populating for a particular cost center
Report Painter(GR55) values are not populating for a particular cost center for the months of April 1 2011 where as for May onwards values are displaying correctly..We have check the transaction code KSB1 for this cost center there are some values posted for the period of April..
Can any one help me to find out where exactly the issue is and how to resolve the same..Please check your variables in your report.
-
Few values of report column do not display in report while applying filter
Post Author: anuragg11
CA Forum: WebIntelligence Reporting
There are 6 drill filters applied on the report to filter out the report column data. Few values of the report are not displaying in the report when using drill filter. Same issue is with report filter too. If filters are removed then values are appearing in the report. We are using version BO XI R2 & Java runtime JRE 1.4v. It doesn't look issue is with Java version because only few specific data of the report column are not shown in the report when using filter on the data. Example: One of Report data column contains below values: 24.2, 26.9, 120.1, 230, 274.9, 275.8, 333.2 Report is displaying all these values when there is no filter on any data. But report doesn't display data when applying filter on 274.9 or 120.1 howver filter on other values 24.2, 26.9, 230, 275.8, 333.2 are working fine.Hello,
I think i know what your problem is.
Although in table view your 2 requests combine perfectly and show separate results in pivot view BI unfortunaterly adds them up.
One work around would be to go in your criteria add in each request a dummy column. This can be obtained the following way:
1. click on a column to add it in the criteria (it doesnt matter which one)
2. go into the edit formula of that column
3. delete the formula and in its place write 'Dummy Column 1'
Do the same for the second request by adding a "Dummy Column 2'
Now the Pivot Table should also show up correctly
Let me know if it goes well or if you have any further questions,
Kostis -
Stock in warehouse report - value not displayed.
In the "Stock in warehouse report" I selected this option: Price source = Last purchase price.
In the report, for an item, the value in the field "Item Price" is not displayed.
This item has a good receipt (with value) in this year.
Why the value is not displayed?
Thanks
PaoloPaolo...
1. Did that receipt get paid for with an AP Invoice (when last purchase price is updated)?
and
2. Did you run an Inventory Audit Report before running the Inventory in Warehouse Report?
To see this maybe you can go into SAP OEC DEMO and create a new item, then create a PO - run the two reports, copy to Goods Receipt PO - run the two reports, and then copy to AP Invoice - run the two reports. You will see the difference.
Accounting point - an item is not really valued until the AP Invoice is processed. Only then do you know what the actual purchase cost is for a product.
Regards - Zal -
Pie chart value not displaying in report builder
Hi,
I created a report by using report builder i used a pie chart in my report but one value is showing other one is not showing. Kindly tell me what is the problem behind it?
here is an image which is not displaying 1 value in pie chart. please help meHi Aamir,
Please check if there is any misconfiguration (e.g. show data label, formatting, etc.) for your chart slice per the following post.
http://social.technet.microsoft.com/Forums/en-US/ebc3bfc5-6338-4946-ade6-64e89611f6b7/ssrs-report-builder-30-pie-chart?forum=sqldatawarehousing
http://msdn.microsoft.com/en-us/library/dd220469.aspx
Further more, you can post this topic in SQL server forum for a better assistance.
http://social.technet.microsoft.com/Forums/en-US/home?forum=sqlreportingservices%2Csqldatawarehousing%2Csqlanalysisservices&filter=alltypes&sort=lastpostdesc
Thanks
Daniel Yang
TechNet Community Support -
Crystal Report V9 do not display decimal value HELP!
<p>I have a field in Informix data type is Decimal(6,2)</p><p>when i used the field in the report, the decimal is not displayed</p><p>example: field1 = 305.50, in crystal report it only displayed 305.00, already setup the formatting. any possible solution?, please help!</p>
<p>have check all the options in my pc and crystal report, all seems to be ok, and have tried displaying an informix field decimal(5,2), and it displays ok (154.23) in my crystal report, but when trying to display the field decimal(6,2) crystal report display decimal up to 99.99, but when it reaches 100+, it will not display the decimal, very weird, help.</p><p>have tried the formula as well but still doesnt work.</p><p>any other possible solutions, pls help, thanks.</p>
-
Null values not displaying in the LOV on the parameter form.
My report works perfect while in Oracle Reports 10g, however when I move it to our menu (Oracle Forms 10g) it does not display the null in the LOV on the parameter form.
This report allows the the user to select by inspector or district or everyone for certain dates.
Ex: I have 4 parameter fields. The user must enter the start & end dates and either the Inspector or the district or leave the inspector or district null to run for everyone.
The district LOV is :
select dnr_section_code, description from dnr_section_code where dnr_section_code in ('29', '38','52')
UNION
select null, 'All' from dual
order by 2 asc ;
The inspector LOV is:
select null , 'All' from dual
UNION
select person_seq, first_name||' '||last_name inspector from vw_eng_inspectors
order by 2 asc
In my Data Model query I use the :
My select
from tables
where clause
+
----by inspector
and (prod_fac_inspections.person_seq_inspector =
nvl(:inspector,prod_fac_inspections.person_seq_inspector))
---by district
and
(d.dnr_section_code = nvl(:district,d.dnr_section_code)
and d.person_seq = prod_fac_inspections.person_seq_inspector)
Again, it works perfect in Reports! It eliminates having 3 reports on the menu. This one report gives the user the option of selecting dynamic parameters.
Also, I got so frustrated, that I went a different route of using a default where.
I am stuck with the error of ORA:00933 SQL command not ended properly
1=1
I set the initial value to 1=1 and it does not like it.
I am stuck!
DB = Oracle Database 10g Enterprise Edition Release 10.2.0.2.0Hi Krishna,
I'm not sure I understand the probelm.
A progress bar control only displays numeric values. When do you mean by "unassigned values"? What would you expect to be presented?
Best regards,
Udi -
Total Amount value not displaying while executing print progrm for PO form.
Hi All,
I created the PO form, for this i written a print program.After executing this print program everything s displaying & populating, but only the Total Amount not displaying r not populating.
But, if i run the PO n tcode ME23N the Total Amount is displaying, after assigning the form n NACE.
So help me to get the Total Amount to be displayed n main window, while executing the print program.
Like this i declared n smartform, Total net value excl. tax &is_ekko-waers& &is_pekko-netwr&......
The print program as follows,
report zpo.
tables: ekko,pekko,ekpo,ekpa,eket,ekkn,ekek,komk,nast.
data: fm_name type rs38l_fnam.
data: is_ekko type standard table of ekko with header line.
data: is_pekko type pekko occurs 0 with header line.
data: it_ekpa like standard table of ekpa,
it_ekpo like standard table of ekpo,
it_pekpo like standard table of pekpo,
it_eket like standard table of eket,
it_tkomv like standard table of komv,
it_ekkn like standard table of ekkn,
it_ekek like standard table of ekek,
it_komk like standard table of komk.
selection-screen: begin of block b1 with frame title text-001.
parameters: pr_ebeln like ekpo-ebeln obligatory.
selection-screen: end of block b1.
select * from ekpo into table it_ekpo where ebeln = pr_ebeln.
select * from ekko into is_ekko where ebeln = pr_ebeln.
endselect.code as follows,
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZPURCHASE'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
FM_NAME = fm_name
CALL FUNCTION fm_name "'/1BCDWB/SF00000060'
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
* CONTROL_PARAMETERS =
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
* OUTPUT_OPTIONS =
* USER_SETTINGS = 'X'
IS_EKKO = is_ekko
IS_PEKKO = is_pekko
* IS_NAST =
* IV_FROM_MEM =
* IV_DRUVO =
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
TABLES
it_ekpo = it_ekpo
it_pekpo = it_pekpo
it_ekkn = it_ekkn
it_ekpa = it_ekpa
it_ekek = it_ekek
it_komk = it_komk
it_eket = it_eket
it_tkomv = it_tkomv.
* EXCEPTIONS
* FORMATTING_ERROR = 1
* INTERNAL_ERROR = 2
* SEND_ERROR = 3
* USER_CANCELED = 4
* OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Report Painter - data not shown at first selection
Hello,
we have a Report Painter report for cost centers.
If we start the report with normal selection the values of the cost centers are not shown at the first look.
The window on the right side only shows the sum for the whole cost center group, but if we select one single cost center the report shows
"This report has no pages. Check the following layout settings: Threshold values, Summation levels, Zero line suppression."
But there are values, but they are only shown if we switch to another cost center and then switch back.
All rows that are selected the first time show no values, at the second time the values are there.
Does anybody know the reason for this?
Thank you & regards
BrittaHello,
starting the report with the selection of a cost center group.
This group is shown on the left side, the values in sum of the right side.
To have a detailled look on the single values of the cost centers I expand the cost center group by clicking on the small triangle, all included cost centers are now showns on the left side.
To see the value of a cost center I click on the respective cost center, on the right side the "no data" information is shown.
Clicking on the next cost center also the "no data" information is shown.
Now switch back to the first cost center on the left side and then the values are shown on the right side. -
Fileter value not displaying in web
Hi all,
I have a issue with selecting the filter value for a unit.
The problem is I can find the value when I run the query in BEx, but same value is not displaying in webreport.
Can anyone tell me, what might be the problem.
(Actually I have to filter on a perticular unit value. In the masterdata I have 30 values.when I exicute the report in BEx I can find all 30 values.But when the same report in web I can see only 29 values)Hello Madhu,
whats happening there is java script code in ur webtemplate is desined to pull only those value go to ur webtemplate and click on the html look at he code there and do changes required to get the value you want.Hope this helps.
Thanks & Regards
Jai -
Interactive report's data not displaying on the edit form.
I have an interactive report that contains 3 rows. When I click on the edit button next to one of these rows, the edit form displays the data from that row.
But when I click the edit buttons next to the other 2 report rows, I get an error message that states: "ORA-01403: no data found. Error Unable to fetch row."
I do not see why this is happening. The PK of the table involved is "Request Date", so the report's "Link Column" region sends the value "Request Date" to the item P54_Request_Date in the form page.
Any idea why this would work correctly for one of the report rows but not for the other 2?
Clearly, each of the report rows must have a value for the PK, so why would the form not be able to find the same row that the report displays? Is it a problem with the form's "Fetch Row from" process?
Thanks.Hello:
Your problems are primarily related to in your choice of a 'Date' type as the PK for your table. The Automated Row Fetch (ARF) process uses a SQL statement similar to the one below to retrieve a record from a table select c1, c2, c3 ... from tab where PK_col = :page_item_containing_PK_value . This would work find if the the 'page_item_containing_PK_value' were of the DATE data type. However, all APEX binds are done using varchar2. This means that the 'page_containging_PK_value' needs to have the char representation of the date that matches the default date setting on your database. So the page-item needs to be something like 'DD-MON-YYYY HH24:MI'. In your case the PK item is probably being set to 'DD-MON-YYYY' and therefore the fetch fails.
Now, for the 'issue with the :' in the character representation of the date.The link on the report page uses the standard APEX URL syntax to construct the link
f?p=App:Page:Session:Request:Debug:ClearCache:itemNames:itemValues:PrinterFriendly
As you can see, the ':' acts as the separator that delineates the components that make up the APEX URL. So, having a ':' in the 'itemValues' component will make the APEX engine treat whatever follows the ':' in the value passed as a delimiter as opposed to being part of the value being passed.
Varad
Maybe you are looking for
-
BAPI Error: No account assignment exists for service line 0000000000
I am using BAPI : BAPI_PO_CREATE1 to create a PO. I am getting this error while creating PO "No account assignment exists for service line 0000000000" Please help.
-
What is mdworker and why is using so much of my CPU?
I've read earlier threads in which mdworker is mentioned or discussed but have not found an answer for my question. Actually, one post came close, but it was from a few years ago, and mentioned a tab on Activity Monitor that does not exist on copy. S
-
I've set 2 aliases in my iCloud Account and want to set a 3. one but it doesn't work
In my iCloud Account i have 2 Aliases transfered from Me.com. When i set up iCloud on my Mac i see one another alias that i had on Me.com, i can choose it as the despatcher adress but it is not listed as an alias in my ICloud.com Account. My Problems
-
FI-AP (vendor master group, Zip code required field)
Hello SAP Guru's, I am working on Vendor master data groups and my client asked me to make the zip code field mandatory. When i go to "define account groups with screen layout- vendor name-general data- address, i don't see a tab for Zip code to make
-
I have two e-mail accounts. A lot of my content is with the older account which is deactivated. How do I get iTunes to recognize this content?