Few values of report column do not display in report while applying filter

Post Author: anuragg11
CA Forum: WebIntelligence Reporting
There are 6 drill filters applied on the report to filter out the report column data. Few values of the report are not displaying in the report when using drill filter. Same issue is with report filter too. If filters are removed then values are appearing in the report. We are using version BO XI R2 & Java runtime JRE 1.4v. It doesn't look issue is with Java version because only few specific data of the report column are not shown in the report when using filter on the data. Example: One of Report data column contains below values: 24.2, 26.9, 120.1, 230, 274.9, 275.8, 333.2 Report is displaying all these values when there is no filter on any data. But report doesn't display data when applying filter on 274.9 or 120.1 howver filter on other values 24.2, 26.9, 230, 275.8, 333.2 are working fine.

Hello,
I think i know what your problem is.
Although in table view your 2 requests combine perfectly and show separate results in pivot view BI unfortunaterly adds them up.
One work around would be to go in your criteria add in each request a dummy column. This can be obtained the following way:
1. click on a column to add it in the criteria (it doesnt matter which one)
2. go into the edit formula of that column
3. delete the formula and in its place write 'Dummy Column 1'
Do the same for the second request by adding a "Dummy Column 2'
Now the Pivot Table should also show up correctly
Let me know if it goes well or if you have any further questions,
Kostis

Similar Messages

How to use Special value set with Column clause to display addtional column

hi
can anyone tell me
How to use Special value set with Column clause to display addtional column
how can i use FND POPID and with COLUMN clause ?

Dear Yaseen,
To get the value in formula cumulative,after you have created the formula for that particular key figure,go to edit and click on tab "calculations".
In that select overall result as 'count all values not equal to zero' and single result as 'count all values not equal to zero' .
And mark the cumulative check box underneath.
I hope you get the desired result and please do me favour .
Sumit goomber

Datform's Rows & Columns are not displaying in Capital Expense Planning

Hi ,
Any one let me know why the Dataforms Row's & Columns are not displaying in Summary Reports Dataforms in Capital Expense Planning ,in 9.3.1 Version.
Any help on this appreciable...
Thanks.........

As John mentioned, make sure that you aren't supressing the data. If there is no data in essbase and you are supressing missing data then there will be no rows. You can unselect "supress missing data" by going to admin>manage data forms. Select the data form in question and click edit, then navigate to the row/column tab and under row properties, ensure that the "supress missing data" check box is unselected.
You will want this unselected if users are going to input data in this form.
DQ

Image content type in Site Asset Image library: The Preview and Thumbnail Preview columns do not display the picture of the item.

I have two different Site Asset libraries. The Site Asset Picture library has items of
content type picture. The Site Asset Image Library has items of
content type image.
1) I do not quite understand the different between a picture content type versus an image content type.
2) the thumbnail and preview columns do not display the image in the Site Asset
Image Library. (the image does display in the thumbnail column of the Site Asset Picture library.) I expected the image to display in the Site Asset Image Library the same as it does in the Site Asset Picture library.
Why doesn't it?
Betty
Betty Stolwyk

I have subsequently found out that our "Site Asset Images" library is a Document Library to which someone must have replaced the Document content type with an Image content type. I also found out that picture previews/thumbnails cannot be displayed
in Document libraries. So the problem was the library type, not the content type.
So I simply created a new Picture Library (whose content type = picture) and copied the files into that and the thumbnails displayed just fine!
I bet what led to this is the default "Site Assets" library that is created for a new Team site. It is just a document library but sounds very similar to the "Assets" library. I can imagine someone thinking the "Site Assets" library was a standard
container for images, and simply changed the name to better identify the content!
As far as 'image' vs 'picture' content types, I noticed that a new Picture Library contains a content type of 'picture', but an Asset Library contains a content type of 'image' (as well as audio and video). Although the 'image' content type has a few
more fields than the 'picture' content type (picture content type does not have thumbnail), the actual Picture Library contains pretty much all the same fields, including the thumbnail. So for all practical purposes, either library type can be used for
storage of pictures. I am guessing that the Pictures Library which uses the picture content type is for backwards compatibility purposes, and that the 'image' content type is newer, being derived from the new "Rich Media Asset" content type and used
in the new Asset Library which can hold audio and video in addition to pictures.
Microsoft Help also mentioned that a Picture Library has a slide view which an Asset library does not. So my take on that is that if you want the potential of seeing your pictures as a slide show, put them in a Picture library which is still using
the 'picture' content type of previous SharePoint versions. If you want to keep pictures organized with audio/video files, then put them into an Asset library which uses the 'image' content type derived from the new Rich Media Asset content type.
Betty Stolwyk

Columns are not displaying in a Dimension in the presentation layer

Hi All,
I have a Dimension in one of the subject area which has 3 columns. It was working fine but yesterday, we have an issue about this. These columns are not displaying anymore in the dimension.
I have checked in the Repository and from the Presentation services for the permissions and they look fine. Is there anything else am missing. If so, where I need to check.
Kindly help me on this.
Thanks,
Imtiaz.

Hi,
Check three things.
1. Try to login Admin user and check whether those columns are present or not.
2. Try to login different browser.
3. Cross check privileges for login user (what role has assigned ).
Note: Clear the browser cache and all Bi server cache and check.
Hope this help's
Thanks,
Satya Ranki redddy

If free characteristic is dragged into columns % is not displayed correctly

Hi,
I am working on query designer BW3.5,
In one of my queries I have a key figure for calculating percentage of total number of employees.
the report is working fine.
Now end user is saying that if he drags any of the free characteristic into columns such as state or zip, the % is not displayed instead X is dispalyed everywhere.
Please provide me some pointers as how to resolve this issue.
Thanks,
Rashmi.

Hi,
you should have a look at the detailed data within that query. In most cases like this it seems to calculate a value by doing a division by zero.

Fixed values of dynamic attributes are not displayed for bid response

Hi
I have created a bid with dynamic attributes and have weighted the options with fixed values. I publish the Rfx (bid) and all is ok. The problem is that the fixed values are not displaying when doing a bid response.
We are using SRM 7.0
Can anyone help?

No. Not yet. I think it is a bug. You should create an OSS message to SAP and ask them to pay special attention to the following code block:
Class: /SAPSRM/CL_CH_WD_DODM_DYNATTR
Method: /SAPSRM/IF_CLL_MAPPER~REFRESH
At the end of the method, look for code context:
IF lv_object_type = c_qte.
*Set the Fixed Values Table to Invisible
lv_visible = abap_false.

Using SharePoint 2013 OIP the "Title" column is not displayed

Using the SharePoint 2013 OIP against our SharePoint 2013 environment, I am seeing that the "Title" column is never displayed in any of the activities or published data. This is the only limitation that is preventing me from using this OIP.
Currently using the scorch OIP and am concerned that it seems is not being actively maintained. Which by the way shows the Title column in all the same lists I am connecting to with the Microsoft provided OIP.
Thanks for any guidance you can provide,
Jim

Hi Jim, this is something I've seen before. It may be a bug in the SharePoint 2013 IP, though it does work in some cases and not in others, so difficult to say what the cause is. My recommendation is to change your list to make the default Title column optional
and hidden, and use a new custom field for the name of the item instead. See also:
http://sharepoint.stackexchange.com/questions/118181/how-to-remove-title-column-in-sharepoint-2013-list
Noah Stahl | Automys |
Downloadable Microsoft automation examples and solutions

Firefox does not display item description while in EBAY.

In Firefox I log on to EBAY. Any item that I call up does not display the description nor did IE 8. I upgraded IE 8 to IE 9 and EBAY now works in IE 9.I have set off the forged wed site message. I have installed latest Firefox, Realplayer and Flash player. I am running Kaspersky firewall, and several malware scan and registry fixers.
The operating system is a current Windows 7.
Ebay says it is not their problem yet the symptoms occurred when they changed how they display the description for an item.
Need help.
Thanks
Mike

Hi,
You can try to '''Clear Now''' the '''Cache''', '''Cookies''', and '''Site Preferences''' in '''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History Clear Recent History].
For optimal firewall/AV/other security software configuration, please see [https://support.mozilla.org/en-US/kb/Firewalls this]. Ideally Firefox and its processes/related files should have full trust in all the modules/configuration areas of the security software - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures).
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]
You may also have to restart the PC before the new rules sink in completely.
If problems persist, you may also want to Reset Firefox and start afresh.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

The fixed value date is empty and not displayed in the VA05 report

Hi SD Gurus,
With in the Sales Order in the line item level in the billing tab we have the fixed value date (VBKD - VALDT) were entered.
But when we try to execute the report VA05 were the fixed value date column shows empty (i.e without the date it shows the blank). Can you any one help me with regard.
We would like to fix this problem.
Thanks in advance for providing solution to this query.
Thanks and Regards,
SAP-SD group

Hi janarthanam,
Ok.
Goto t-code SQVI,SAP Quickviewer.
Give a name to your query and enter description ,etc.
Next enter the table from which you want to fetch data,ie,VBKD .
Select "Layout mode" for displaying data on the SAP screen or "Basis mode " if you want to extract the data to a word doc,excelsheet or a flat file.
Next you can select the fields you want to display into your report,their position and ascending/descending order,Here make sure u select
the field u need to display ie. the fixed value date ( VALDT) .
also select the fields u wish to have in the selection criteria.
Enter these required information and u would get a report on the SAP screen or in your desired format.
Hope it will suffice you.
For any queries ,your are welcomed.
Thanks,
Umesh.

Manage Table / Modify column does not display current values

Hi,
when I choose "Modify column" from the menu "Manage table", the current properties of the column, i.e. type, size and so on, are not shown, but are defaulted to whatever value has been defined inside that page, so the column type is always set to "Number" for instance.
It would be definitely better to retain the current values, in my humble opinion.
Bye,
Flavio

I have also run into this problem. I am running IQ 16.0 sp1. I wanted to increase the number of characters in one of the columns so I have to create a new column, copy the data, delete the old column then rename the new column.
Is there any reason the MODIFY function is not implemented in IQ?

GL Acc Balance S_PL0_86000030 columns do not display fully

Hi!!!
Above report generates with '*' in front of values when the value length is longer than the column length.
How to get the full amount displayed in the layout?
Please help.
\Madhu

HI,
Ideally this should not be a problem in SAP. This is a standard SAP report and such reports always use standard format.
However, if you are still facing a problem you may want your developer to take a look at the associated Form. The Form for this report can be identified by using the menu path EDIT -> Display form.
Regards

Edmx cannot mapped stored procedure column info not displaying

Hi,
I'm trying to follow the QBE on how to mapped stored proedure in EF.
Everything works fine until I need to Add Import Function where I could not see the list of column info.
I'm using .NET 4.5, EF 5.0, 11gR3 DB, VS 2012 & ODP 11.2.0.3.60 (beta)
Below is my app.config.
<oracle.dataaccess.client>
<settings>
<add name="HR.UPDATE_AND_RETURN_SALARY.RefCursor.NEW_SALARY" value="implicitRefCursor bindinfo='mode=Output'" />
<add name="HR.UPDATE_AND_RETURN_SALARY.RefCursorMetaData.NEW_SALARY.Column.0" value="implicitRefCursor metadata='ColumnName=FIRST_NAME;BaseColumnName=FIRST_NAME;BaseSchemaName=HR;BaseTableName=EMPLOYEES;NATIVEDATATYPE=Varchar2;ProviderType=Varchar2'" />
<add name="HR.UPDATE_AND_RETURN_SALARY.RefCursorMetaData.NEW_SALARY.Column.1" value="implicitRefCursor metadata='ColumnName=SALARY;NATIVEDATATYPE=Number;ProviderType=Int32'" />
</settings>
</oracle.dataaccess.client>
As far as I can tell it seems like VS would use the tags above to figure out the return column info and create a complex type. I could not see why it is not recognizing it.
Please note that I can access an Oracle table successfully and display rows in VS.
Thanks in advance

I'm not sure if you're the person that just logged a SR on this, but I just recently worked the same issue.
It turns out that
a) if you don't pay attention, adding a new Oracle Connection in Server Explorer defaults to the MANAGED ODP.NET (you can still create a connection using UnManaged though).
b) the metadata for MANAGED ODP.NET is different than the metadata for UNManaged. Here's the correct mapping for MANAGED ODP:
oracle.manageddataaccess.client>
    <version number="*">
      <implicitRefCursor>
        <storedProcedure schema="HR" name="UPDATE_AND_RETURN_SALARY">
          <refCursor name="NEW_SALARY">
            <bindInfo mode="Output" />
            <metadata columnOrdinal="0" columnName="FIRST_NAME" providerType="Varchar2" nativeDataType="Varchar2" />
            <metadata columnOrdinal="1" columnName="SALARY" providerType="Double" nativeDataType="Number" />
          </refCursor>
        </storedProcedure>
      </implicitRefCursor>
    </version>
</oraclemanaged.dataaccess.client>

2 structures in the column,structure not displaying in the output(RSRT)

Hello BI Folks,
           I have a requirement where the user enters the input(text variable)
say 03/2011 then the report output should be Jan,Feb,Mar.
say 05/2011 then the output should be Jan,Feb,Mar,Apr,May,likewise.
The report output should be:(if the text variable is---02/2011)
Brand          Jan              Feb                     Mar                      April                      May                       June                  July                 Aug             Sept           Oct                Nov           Dec
          Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc
A      455    56     38
B                03     32
C
D       90      2      75     69
I am acheievin this by using creating 2 structures in the columns.
1 structure is for jan-dec & another structure for the KPIs(sales,FOC).
I am writing customer exit to read the text variable & get the data for the variable read.
lo_year = sy-datum+0(4).
lmon =sy-datum+4(2).
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'text_variable'.
l_s_range-low = loc_var_range-low.
ln_value = l_s_range-low+4(2).
DO ln_value TIMES.
l_counter = l_counter + 1.
CONCATENATE 'customer_exit_mons' l_counter INTO lv_text.
CASE i_vnam.
    WHEN lv_text.
      IF i_step = 2.
        CONCATENATE lo_year lmon '01' INTO lv_startdate.
     ** Call a function module to arrive the enddate.
        CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
          EXPORTING
            day_in            = lv_startdate
          IMPORTING
            last_day_of_month = lv_enddate.
        l_s_range-low = lv_startdate.
        l_s_range-high = lv_enddate.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        CLEAR l_s_range.
      ENDIF.                                                "End IF
ENDCASE.                                                  " End Case
lmon = lmon + 1.
ENDDO.                                                       " End of Do loop
CLEAR: ln_value , lv_text .
The problem is i am not getting the query ouput atleast not the query structure.Is there any other way to achieve this type of output.
Note:--The text variable wil be based on 0calmonth.
           The custmer exit variables Jan-dec is based on 0calday.
Edited by: shreyaJ on Nov 18, 2011 11:49 AM

Hi crazymatts,
Thanks for ur reply.
There is no data in the text variable (0CALMONTH).
But i think the structure atleast gets displayed in the output,am not gettin even that.
And there is no reference characteristics on the text variable.Its a manual input variable which i will be using in my code.
Thanks,
Shreya J.
Edited by: shreyaJ on Nov 23, 2011 8:12 AM

View Column info not displaying in Columns Tab

Running XP SP2 and SQL Developer 1.5.1 5440
When looking at views that are using tables from another schema. I don't see any of the columns information. I have DBA role
In rel 1.1.2.25 2579 I see them just fine. (Both loaded on machine right now)
Is this a bug or do I have a setting problem?

Barry,
As a "disclaimer", the points below are based on my usage of SQL Developer and things that bug me about how it works or doesn't work - I know that there are more important things to fix than a number of these.
On to the basics ... and the most basic of the basics for a tool like SQL Developer:
1) Problems with data dictionary queries in navigator or object tabs:
- Triggers not listed in Table tab if trigger owned by different schema to table owner
- Index columns not listed in Table tab if index owned by different schema to table owner
- View columns not listed in View tab if view owned by different schema to current user
- Dependencies not listed in Table/View tab if other object owned by different schema to object owner
- Performance of Table Node (outer join added in 1.5.1)
- there are a lot of other posts about the supplied data dictionary queries not producing the right results and I often find that I am querying the data dictionary directly in a SQL Worksheet for information that should be correct in the navigator/object tabs
Basic things that I expect to work in a tool like SQL Developer (or to work given that they have been included):
1) Popup Describe problems
- schema name is case sensitive, so doesn't find owner.object
- synonym overrides schema name (OWNER.OBJECT will describe local OBJECT synonym instead of OWNER's object)
- position based object name selection includes punctuation
2) Bind variables that work properly in PL/SQL (both Execute Statement and Run Script)
3) Package decomposition in object navigator doesn't report variables or constants of custom types and lists object.column%type constants as "constant"
4) Exporting query results re-executes query to display Export dialog - this presents as SQL Developer freezing after selecting the Export menu option for queries that take a long time for first record to appear
I would use SQL Developer more (or more of SQL Developer) if:
1) More integrated file based development - I still do the bulk of my object creation (largely PL/SQL and views) editing in Wordpad and running via SQL*Plus largely because I get better error reporting.
- display the compile message tab when using the compile button for a file
- show errors doesn't work for views
2) Running Reports hang SQL Developer - I still have my SQL scripts for my common queries, which I can run through SQL Worksheet in a much friendlier fashion (I can cancel them and they don't hang SQL Dev) than I can run reports
Problems that detract from the "polish" of SQL Developer, but don't really have a big impact on usage but discourage me from trying to "convert" non-techie TOAD using colleagues:
1) Multiple TNSNAMES files read - generates multiple entries
2) Export of long string literals causes ORA-972 error
3) "Statement Processed" feedback is extremely sensitive to spaces ("create Statement Processed" where two spaces between the create and view keywords) and assumes simple statements ("create unique Statement Processed" or "create or replace force Statement Processed" as examples)
I think that makes 10 basics to fix (although some as just issues that make the tool look unpolished), however, it does seem as though testing in the following areas could be significantly better:
1) Regression testing - a number of bugs seem to crop up again after being fixed in earlier versions
2) Navigator/object tab queries - especially with multi-schema applications (ie Oracle eBusiness Suite) and just generally objects owned by other schemas
3) Performance with large DBs in terms of object count (ie Oracle eBusiness Suite)
As a final note, it is my impression that SQL Developer development has been unbalanced in focusing too much on including new functionality (which is good) and not enough on getting existing functionality right (which is better).
I hope this helps (and wasn't too long) ...
theFurryOne

Few values of report column do not display in report while applying filter

Similar Messages

Maybe you are looking for