Report Program on Warranty assignment/Reassignment for the VMS vehicle on different Actions.

Hi Guru's,
I have requirement on SD VMS and Warranty module,
Need to assign/reassign the warranty based on the action of the vehicle which present in VLCHISTORY,
BGMK
BGM1
BGM2
BGM3
Need to create a report program on this requirement, help me with the logic and the proper approch,
1)Grouping the vehicle by comparing the characterstics of the vehicle?
2) How to identify the master warranty?
3) How to assign the warranty to the group of vehicle?
4) How to create a audit report or the error message? (Note: VELO Message class)
Send me the logic or the report program with the screenshot.
Regards,
Lakshmi Narayanan V
+91-9008874969

Hi all,
    Iam really waiting for someone to see and  get the logic right  for this code.Iam completely stuck up.  i need ur help
Thanks

Similar Messages

  • HT5429 How long after you report a problem does it take for the fix to be picked up in maps?

    How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.

    Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
    Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually.

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • I can't update apps because iphone 5 is asking for the password to a different itunes account

    In my settings under iTunes and App Store I am signed in with my iTunes account.
    However, when I go to update apps it asks me for the password to a different iTunes account - that of my partner who also uses my iMac.
    I've tried signing out and signing back in via Settings but it's still asking for my partner's password instead of mine.
    What should I do?

    the apps were orignially download with the old ID and are linked forever to that old ID.  You need ot delete the apps and if you want them you need to download with your currrent ID

  • HT4859 How do I keep one Apple ID account for the family, yet have different iCloud accounts for calendar, email, etc.??

    How do I keep one Apple ID account for the family, yet have different iCloud accounts for calendar, email, etc.??

    First decide which iPhone will be keeping the current iCloud account.  On the others, go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  The phone that will be keeping the account will not be effected by this.)  When prompted about what to do with the iCloud data, be sure to select Keep On iPhone.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.
    Once all your devices have their on iCloud accounts, to un-merge the data you will have to go to icloud.com on your computer, sign into each iCloud account separately and manually delete the data you don't want (such as deleting your son's contacts from your account, and vice versa).
    You should also use separate Apple IDs for services such as iMessage and FaceTime.  Otherwise, you're likely to end up getting each other's text messages and FaceTime calls.  If you need to change these, for iMessage go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a separate ID (such as the one just created for iCloud).  For FaceTime, do the same thing in Settings>FaceTime.
    Finally, this article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/.

  • New Gl- report with some details of CO for the non leading ledger

    Hi,
    I am using New GL. I have 2 ledgers (local ledger and USGAAP); The local ledger is the leading ledger, so is the one which impacts to CO. I need some information in CO (mainly cost center) for the non-leading ledger (USGAAP). I am thinking in create a report painter with the table of non-leading ledger, but I cannot find a table in NGL which save the CO object and can choose the ledger. I am looking too, this information by a standard report, but I cannot find one.
    Any idea about a solution of this situation?
    Thanks,
    Cecilia

    Hi Cecilia, did you assign Cost Center scenario (FIN_CCA) to your ledgers?, otherwise NGL Tables (FAGLFLEXT and FAGLFLEXA) won't have Cost Center field populated. If this is the case, maybe your only option is use BKPF then BSEG + BSEG_ADD (Entry View of Accounting Document for Additional Ledgers) and pull Cost Center from there.
    I hope this helps.

  • A report to exchange currency SIT -- EUR for the wage table T510

    Hello,
    I need to change the Slovenian currency SIT to euros. There are already entries in the table T510 and in infotype 0008 Basic pay.
    Is there a report how to carry out the currency exchange or do I need to manually create new entries for the table T510?
    Even if I manually create new entries in euros, how can I handle the existing entries? If a person already have entries in the Basic pay and the wage types and amounts are in SIT --> how to show them when the currency should be euros now. Is there a method to change history data (from year 2007).
    There is no payroll neither archiving.
    A prompt answer is highly appreciated.
    BR,
    Pia

    Hello,
    Unfortunately the link you send me is not valid. At least I cannot see any mail. All I see is: "The specified thread [0] was not found."
    BR,
    Pia

  • "Date picker" in report - - View source shows no label for the date picker

    Hi
    In one of my reports, I am using multiple types (textarea/text/date picker/select list)
    I wanted to use a javascript based on the label, but I do not see "<label>" for Date picker in the view source due to which my Javascript fails.
    Snippet of view Source:
    <td class="t3data" ><label for="f08_0001" class="hideMe508">CATEGORY</label><textarea name="f08" rows="4" cols="16" wrap="VIRTUAL" id="f08_0001">EMPLOYEE INDUCTION</textarea></td>
    <td class="t3data" ><span class="lov"><input type="text" name="f11" size="15" maxlength="2000" value="29-FEB-08" style="padding-right:5px;" id="f11_0001" /><script type="text/javascript">
    As you can see above, we have a "label for" for the text area but not for the date picker
    Is there a reason for the same?
    Thanks
    Nitin

    Hi,
    OK - the headers attribute should also help as these will identify the correct cells. You would need to know the html tags used within each cell for each datatype.
    Would using cloneNode help you? It's a method of creating a copy of an entire row in a single instruction
    Andy

  • Assign access for the database to None with maxl?

    I need to assign access to the database to none with maxl. Any help will be appreciated. <img src="i/expressions/beer.gif" border="0">

    Do you mean setting the minimum access permission on the database?<BR>For that the command is 'alter database 'Sample'.'Basic' set minimum permission no_access;'<BR><BR>If you want to prevent users from logging on to the database then use something like<BR>'alter application 'Sample' disable connects;'<BR><BR>HTH<BR>

  • While Creating PO its saying account assignment mandatory for the material.

    Dear All
    I have created a material with Mechanical Engineering as Industry sector and ROH as Material Type.
    For this material i created PR and PO both the time it said account assignment is mandatory.
    Why this happens?
    I don't want to enter any account assignment category.
    Pls help.
    Regards
    Depin

    Hi,
    Normally purchasing ROH with PO needn't to assign the account assignment category, but if don't create accounting view for the ROH material or create the accounting view without valuation class assigned, system can't find the relevant stock account automatically, so will issue the message just like "Account assignment is mandatory".
    So you should check the material master data, if it's fine, then you will not see the message any more!
    Good luck
    Tao

  • Crystal report from MSC taking long time for the first time

    Hello Friends,
    I have a report designed in Crystal Reports to display the BP details. It is giving some performance issues. In the analysis it is found that it is taking long time immediately after i restart the machine. From the next time it is not that worse.
    If anybody is facing the same performance issue while using the crystal reports, kindly let me know the reasons for this. I would like to know the ways to increse the performance.
    Thanks for all your support.
    Best regards,
    Swarna Seeta

    Hello Swarna
    Reporting is quiet a heavy component which interacts with many other dlls.
    What happens when you say generate report from the mobile application for the first time, UI Framework knows that it is a reporting call and it will instantiate Reporting Manager. Reporting Manager is the single point of contact for the entire reporting functionality. During the initialization of reporting manager,
    it needs to instantiate all other working components like Error Hanlder, Data handler, Resoure component and crystal reports etc..Resource component is a COM component and so there will be lot of Marshallign/Unmanrshalling from Dotnet calls. Since all these sub components are singleton classes, initialized only once for the first time and reuse the same instance in the subsequent attempts.
    Hope I had made it bit clear
    Best Regards
    Shankar

  • Is ther any other program other than office 2004 for the osx?

    My office 2004 trial period is over, and I'm wondering if maybe there might be other programs for the osx other than office before I decide to purchase it.

    Personally, I have never used office. I have always used Appleworks and now Apple's Pages. It depends on what you need it for. If you are just looking for a word processor, I would go for Pages and save some money (iWorks).
    NeoOffice is a great free office like suite.
    There is also ThinkFree Office which I have heard is good.

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information.

    I started getting these errors on one of my lists that has several workflows running on it. The strange thing is it has been running pretty much error free for 1.5 years and we have not made any changes to the workflows and no updates have been applied prior
    to the errors staring.
    It is typically always the same workflow but it doesn't always happen, only some of the newly added list items will error. If I simply cancel the current instance and manually start it again it runs fine to completion and it only seems to error out
    at the start.
    Most of the other workflows pause/wait for a status change but I will be reviewing all the workflows to confirm there is no locking conflict. I have added a Wait to one other workflow that I know will update the list item on startup, it is populating
    the Title column but even after that I am still getting the error.
    I noticed in the TraceLogs, 2 errors that started on Feb 2 and I could not find them in any previous logs (went back many days with no occurrences).
    02/02/2015 07:15:55.93  w3wp.exe (0x1C50)                        0x18D4 SharePoint Foundation        
     Workflow Infrastructure        88xr Unexpected WinWF Internal Error, terminating workflow Id# 6cbf1da4-fbf9-4dfe-ae48-b6d765cc6d03 
    02/02/2015 07:15:56.37  w3wp.exe (0x1C50)                        0x2140 SharePoint Foundation        
     SPRequest                      8l3a Medium   Failed to cache field with id "{49af83c9-c5e3-47db-b055-bf18673bba67}", overwrite=0
    The "Field ID"{49af83c9...} listed is a Lookup column to a Clients list on the same site.
    Any suggestions on what could be causing the sudden errors. I will be reviewing all other workflows but as I mentioned previously, this system has been working great up until Feb 2 with no changes to the lists or workflows for 3-6+ months.
    Thanks in advance.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • Multiclip on FCP 7 with timecode: multiple files for the same camera have different Angle

    I have FCStudio 7 with OS 10.6.8
    I just filmed a concert with 6 cameras (Sony XDCAM).  They are all timecode sync'd.
    For various reasons there are multiple vid files for each camera (i.e. 172_003 thru 172_006 for camera 1).
    I imported into FCP 7 using SonyXDCAM plug in with no problems.  Each camera file group was given its camera number as the Reel Name (i.e. Camera 1) and that camera's number as its Angle Name (i.e. 1).
    Now when I try and create a multiclip using all six cameras, instead of keeping all the files for a specific camera under a single angle name it treats each file as its own camera angle.  It treats each file as an individual camera instead of having the files flow as a single clip from a single camera based on their timecode.  In viewer I have 8 different angles for a single camera (because of 8 files).  In the make media window for multiclip, the Angle Name is different for each clip but its position is still aligned to its timecode.
    I worked the same project last year and the multiple files for each camera lined up fine, based on its timecode value and camera/reel name.  I can't see what has changed.
    I need each camera's files to sync under that camera Angle Name, and for the files to play in the same angle spot in viewer.
    All advice welcomed as I'm in a major time crunch to complete the job.
    Thanks.

    Well why not just prebuild each angle in its own sequence with sequence timecode matching the source timecode?  Export with current settings and import these files back into fcp and then create your multiclip. 

Maybe you are looking for