Report Repeating Frame

Hi
I have a report with three query and three frames
1st and 3rd frame are display only in first page and fix location.
Middle one(2nd) is display in all pages included 1 page
Problem is 2nd frame i used vertical elasity ='FIXED'
when record goes to 2nd page its display record only the same size of repeating frame. if i change the vertically elasity to Variable its overlapped or change the position
of my 3rd frame. can i set any way to 2nd frame to vertically with out disturbing my last frame. last frame has the same as 1st frame . i am working on Statement .
Last Section Contain Payment slip.
Please Help Me

Hi Syed,
If I understand your requirements correctly, here is what you want to do...
Page 1:
Frame 1 - fixed no of records
Frame 2 - as many records as can fit in after accounting for Frames 1 and 3
Frame 3 - fixed no of records
Page 2 onwards:
Frame 2 - all remaining records
It is not possible to design a layout where any one frame's (your 3rd frame) records can be placed "in between" the records of another frame (your 2nd frame).
A workaround would be to break up the data of 2nd frame into 2 frames (might be possible if it is sorted), and then design like this:
Frame 1
Frame 2 - fixed width, only as many records as can fit in on a page after accommodating Frames 1 and 3
Frame 3
Page Break
Frame 4 - variable width, all remaining records
Pl let me know if my understanding of your requirememnts is not correct.
Navneet.

Similar Messages

  • Reports: Repeating Frames

    In one of the queries for my report I have a column which I don't want to be shown in to body but in the margin, but when I create a field with this column as source there I always get the message:
    REP-1213 Field '<field name>' references column '<column name>' at a frequency below its group
    its recommended to put the field into another frame, but I can't put it anywhere else;
    any suggestions?
    thx in advance

    Reshape the corresponding frame, so that it comprises the space where you wish to have that field. Beware, the higher level repeating frames have to comprise the lower level repeating frames. Repeating frames can't overlap.
    Hope this will help.
    Happy new year!

  • Reports ,Repeating Frame

    Hi
    I am new to oracle reports.
    Want to create reports having all employee details.These details i put it on a repeating frame and 2 fields (name and address) in this frame is elasticity is variable.I want to make the line bold which sepeates each employees.
    Please help me.
    Thanks in advance
    Regards

    1) Wrong Forum
    2) If using 6i reports select GRID option in formatting :)
    Cheers!!!
    Bhushan

  • [SOLVED] Report Repeating Frame Will Not Print More Than One Page of Data

    I have a layout which contains only 1 repeating frame, and is not contained in any other frames. The query that the group of this frame is based on returns 414 rows. The report is a character based report of 180x66. All of the fields in the repeating frame are all in a straight line on a single row.
    No matter what I do, the report ends at the bottom of the first page. If I put the frame at row 30, only 36 rows are printed. If I put the frame on the first row, it stops at 66. No mater what I do, it will not continue on the next page.
    Any ideas on what could be the problem here?
    Thanks,
    Kurz
    Edited by: Kurzweil4 on Oct 13, 2008 3:35 PM
    Print condition was set to All. Changing it to First solved the problem.

    Make sure the repeating frame is variable vertically and that all the frames that it encloses are variable.

  • How can I add a field to a Repeating Frame in the body of a 9i Report

    How can I add a field to a Repeating Frame in the body of an Oracle 9i Report whose source is in a higher group?
    I want to change an Oracle 9i report. The report has no header or trailer but only a body. The body has the parent frame fields & a repeating frame with four fields, A, B, C & D. They all seem to be in one group. I want to add another field E to the repeating frame whose source is from the 'header'.
    I added the field & created a boiler plate & then added the new field, E to the original group A, B, C & D. In the Property Inspector for the field, I pointed the source to the source column in the main query. However, when I run the report, I receive the error "Invalid body size". Some notes on Metalink indicate that this could be due to margins being out of the printable area.
    Moreover, after making the changes & after having unsuccessfully run the report, when I try to open the Page Layout for the report, I get no details.
    Thanks,

    Hi,
    i also got same query can u pls tell me elaborately, if u can can u pls send some code.
    Thanks & Regards
    Jagadeeshwar.B

  • Footer for a report with 2 repeating frames with down/across print directio

    I have a report with a frame for title shown in first page. the content of the report is shown on two columns in a repeating frame(R2) which enclose an other repeating frame (R1). In R2, just after R1, I have a frame for totals. Both repeating frame have down/across print direction. All repeating frames and title frame are enclosed by a regular frame(let say frame A) that have vertical elasticity fixed. at the end of the report i must display an other frame(frame B) with signatures. I put frame B in frame A, just after R2. If I set vertical elasticity to fixed or contract for R2, when the title frame is missing i get an empty space in the bottom of the page(except the first page, where the title appear)(R2 is anchored to title frame). if I set vertical elasticity to variable for R2, the frame B is not shown on last page with records, but in next page. I need a solution to keep the frame B in last page of the report which have records. the problem appear only when I have records in second column.
    Can somebody help me, please?

    Hi,
    I think without using Across/Down instead of Down/Across this is not possible. But then the output is
    1 2 3 4
    5 6 7 8
    If you need to have
    1 3 5 7
    2 4 6 8
    then you had to add some logic in an additional column for sorting the output. (sounds easy, but the logic need some work depending the count of records and their position.
    Regards
    Rainer

  • Setting background image for repeating frame in .pdf report

    Is it possible to set a background image for a repeating frame, and more specifically for a repeating frame rendered in .pdf?
    I do not see any standard property in the navigator for images of any sort and the documentation touches only on setting background images for graphs, which is not the intent in my case. I -did- add an HTML table property background="myimage.jpg" but the report is ultimately generated in .pdf format and I was not surprised to see that the image was not rendered.
    Does anyone know if setting a background image as described is even possible, and if so, how? A second but less optimum solution would be setting the image as the background for all report pages, again in .pdf.
    Many thanks.

    Hi Raj,
    Yes you can have an image in the background. Thats possible if you are using XML forms as an iview or ivew dev in WebDynpro...
    Also check this [link|regarding background color change in iview]
    Regards,
    Piyush
    Reward points if this helps!!!

  • How Do I add new fields to Repeating Frames in existing Report

    Hi,
    How do I add new fields to Repeating Frames in existing Report. The Report has 2 GRPFR, 1 HDR and 2 Repeating Frames. I would like to add a new field(column) to inner most repeating frame. I added the new golumn to QUERY and GROUPs in Data Model. After adding the new column to inner most Repeating Frame in Layout Model, the Layout model is losing all other frame and it is showing only the modified one.
    How do I add new column to repeating frames without disturbeing other frames.
    Any hellp will be appreciated!!!!!!!!!!!.
    I am using Oracle Reports 6i.
    Thanks,
    Ravi.

    you must work in your layour editor
    expand your repeating frames do it more big
    for add your new items or field. after you inserted or add, can you put more little your repeating.
    too can you to do one copy of one field in your repeating frame and assign it in his source your new item in your data model.
    normally i begin with the principal frame and go one by one internally.

  • Headstart/Designer 6i / Report Generation / Format Trigger / Repeating frames.....

    Good morning all!
    Product version...
    Headstart 6i
    Des.6i 6.5.52.5.0
    Des.tools 7.2.52.2.0
    Des.report generator 6.5.52.1.0
    Dev. report builder 6.0.8.14.2
    Any idea on how to generate from Designer, a format trigger on a report's repeating frames???
    Thank you,
    Michel

    You can customize report in Report Builder. The Report Builder can be run from Repository Reports menu (Run -> Report Builder).

  • Designer 6i / Report Generation / Format Trigger / Repeating frames.....

    Good morning all!
    Product version...
    Des.6i 6.5.52.5.0
    Des.tools 7.2.52.2.0
    Des.report generator 6.5.52.1.0
    Dev. report builder 6.0.8.14.2
    Any idea on how to generate from Designer, a format trigger on a report's repeating frames???
    Thank you,
    Michel

    You can customize report in Report Builder. The Report Builder can be run from Repository Reports menu (Run -> Report Builder).

  • Oracle Reports - page numbering for repeating frames

    Hello,
    I have an Oracle Report that has one parent repeating frame containing several children repeating frames. One repeating frame has a maximum of three records per page. If the records do not exceed the maximum, page numbering is fine. If there are more than three records it creates a new page. The new page appends to the end of the report and throws off the page numbering. I changed the source of the page numbering from page number to panel number. The panel number gives the best results. All pages are numbered with the exception of the appended page(s). Does anyone have any suggestions?
    Thanks

    YES!!!, change the PRINT condition of your
    panel field to ALL instead of FIRST.
    null

  • Repeating frame spacing Problem in Reports 6i

    I have a Matrix with Group report. Now I have two sections (one is matrix section, second is Grand totals section).
    After I run the report layout ,Matrix section data (repeating frame) is appearing at one spacing but the other repeating frame in Grand Totals - appears in the same page (below the Matrix data section) with different spacing and aligning.
    I’ve attached the output of the sample report. You can find the aligning/spacing problem between Matrix data (one repeating frame) and Grand Total data (another repeating frame)
    This is the problem, I have tried changing all the properties, but all in vain. I feel that the repeating frame in Grand Totals appears exactly at the same position as the first one.
    Please help...
    Ratnakar.

    Hi,
    There are no such limitations with Reports. If I understand properly, you run the Report twice, in each run, you are trying to execute different query, and you generate two dilimited Reports output files? This should work fine. Try out the latest Reports 6i patch-10 for this. You can even approach Oracle Support with your testcase. FYI, with Reports 6i patch-11, a new feature "dlimited data" is introduced which will give delimited output with a data dump i.e it would not be dependent upon the Reports layout. You can probably try out this new feature also.
    Thanks,
    Rohit Hi Rohit,
    Thanks for the information.
    well I am generating single output file on each run .
    the problem is somewhat funny.
    I have build query2 in data model after query1.
    query 1 is giving me correct output both in .PDF and delimiter version.
    But query2 is giving me 0 byte file for delimiter version although in .PDF it is running fine.
    When I took out query2 to another module it is running fine for both.
    I hope this make sense.
    Moreover if u still not clear about the problem and thinks that u can help me out please send me ur mail id so that I can send you the RDF copy.
    Thanks
    Mohit...

  • Report, Make a linkage group for two pages each page has a Repeating frame

    I Have two pages. And each page have a repeating frame inside a main frame.
    And two pages have a relational data. So, I should to make a linkage group for this two page.
    In my case,
    PAGE 1.
    *M_1 Main frame start
    R_1 Repeating Frame start
    Personal Data Part 1.
    R_1 Repeating Frame end
    *M_1 Main Frame end
    PAGE 2.
    *M_2
    R_2
    Personal Data Part 2.
    R_2
    *M_2
    If there are 3 peoples information, Repeating frame will display continuously.
    In my case,
    page 1
    page 1
    page 1
    page 2
    page 2
    page 2
    But I want to do the following.
    Page 1. -- 1st person's data
    Page 2.
    Page 1. -- 2nd person's
    Page 2.
    Page 1. -- 3rd.
    Page 2. so on...
    I need your help.
    please let me know how to solve this problem.

    Hi,
    i have a question related to this.
    i am making a report in a similar pattern:
    *M_1 Main frame start
    R_1 Repeating Frame start
    Data Part 1.
    R_2 Repeating Frame start
    Data Part 2.
    R_2 Repeating Frame end
    R_1 Repeating Frame end
    *M_1 Main Frame end
    Now the problem is that whenever there are multiple occurences of data in R_2, the data Part 1 is also printed that many times, whereas i want to show this just once.
    Is there any way to do this?
    Regards,
    Swati

  • Page Break Before & Repeating Frame (Reports 10G - Windows)

    Hi to all,
    I have to give page break when a condition met in a tabular report.Like it s advised I tried some layout objects with page break before property true and wrote their return code true if this criteria occurs. But whatever I tried, I couldnt get my desired output.It gives page break but repeats a blank repeating frame in the next page but only with that object I added later with page break property. Anybody have an idea ?
    Thanks...

    Hi,
    sounds like there's no child object for your object with page break before. This property has only impact of the object itself and all it's child objects. An object is a child object of another object, if the position of this objects has impact of the own position. This is only the case, if the parent object is vertical expandable and the child object is horizontally overlapping the virtual expand-region, or the child-object is anchored to the parent object.
    So if you have this layout:
    blue box fixed size
    red box fixed size
    yellow box fixed size
    and you set page break before to the red box, you will get:
    blue box
    yellow box
    -- page break
    red box
    If the red box is verical expandable you will get:
    blue box
    --page break*
    red box
    yellow box
    So in your tabluar report your field of the report should be in a frame and this frame should be child object of your new object which must be vertical expandable or anchor them together.
    Regards
    Rainer

  • Adding a field to a Repeating Frame in Oracle Reports

    Hi,
    I have a report that has 4 repeating frames. At the lowest level (Level 4), I have several fields to do with school swimming sessions - Session Start Time, End Time etc..
    I want to add a field to that frame for Session Notes, and have tried doing this by going to the Layout Model, selecting an existing field (e.g. Start Time) and doing a copy & paste into the Layout Model, with a view to then renaming it and changing the Source to Session Notes.
    However, each time the new field is being created at School level (this is the Level 3 repeating frame) - obviously then when I attach the Session level column as the source for my new field, I get a field referenced "at a frequency below its group" message.
    Any idea how I create a field in the Level 4 group?
    Many thanks,
    Keith.
    PS I am using Oracle Reports v6

    Before adding the items for the level4,create a repeating frame and put the right source to the repeating frame.
    After doing this,put the items on this frame,and they will be level4 items.
    It should work
    aguero

Maybe you are looking for