Report / Table for getting Datewise item cost
Friends,
Can u help me know MM Report / Table for getting Datewise item cost in a plant.
hi,
try table S031...Movement of stocks....
THis shd help you..
Regards
Priyanka.P
Similar Messages
-
Tables for Balance sheet Items.
Dear All,
I want to know the tables for Balance Sheet items like Current Assets Current Liabilities etc like where the
cumulative amounts of there accounts goes ?
If not so given in SAP please suggest me the procedure for How to get there amounts in respective tables.
Regards,
Pankaj.Hi
Michael.
The balances given over here in GLT0 and there respective fields are as on date balance as per Trial balance ?
My basic requirement is that the table should show the balances as per updated Trial Balance.
Please Help.
Regards,
Pankaj. -
How to draw horizontal line at the end of table for multiple line items
Dear Experts,
Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
Thanks
Ramesh ManoharanHi
I tried as per your logic but it is not solving my problem . when i am gone to table painter it is showing line type 1 and line type 2
is below format.. if u see here line type 1 bottom line and line type 2 top line both are same.. so how to avoid this ?
line type 1
line type 2 -
Table for GL line items.
Hi ,
Can anybody tell me what is the table for GL line items in R3 side.
Regards,Thanks Voodi and Roberto,
Actually I am in need of following.
I need to take all fields from 0FI_AR_3 DS and Additional fields as follows.
Profit centre
Net Due date
FI Document number
Document line number
End customer country code
Group currency (USD)
customer no
End customer country
document no
line item
Note: Only pull in AR documents into the structure that have status of OPEN.
Can I find out all these fields from both these tables?
Regards, -
Hi
Pls advice table to get GL line Item actual posting information.
Pls advice table to get the cost center actual posting line item..
Thanxhi
See the below link for SAP FI table
http://www.sap-img.com/financial/important-tables-in-sap-fi.htm
See the below link for SAP CO table
http://www.sap-img.com/financial/important-tables-in-sap-co.htm
nagesh -
Reg. DB Table for SD Order item which is billing relevant
Dear Experts,
My requirement is that for each WBS Element, i need the SD Order item which is relevant for billing to enable the report to check whether final billing was done. If final billing was done for all line items the report will select the latest billing date at least three months ago. What is the Database Table i need to look into? Kindly help me in this regard.
Thanks,
Ramesh ManoharanWhat data you are looking for the database tables??
Guess,
you will get WBS element from VBAP table, Key in WBS element in this table & you will get all SD orders with Item Category (PSTYV).
with this Item Category, Goto Table:TVAP to check whether item is relevant for billing or not
sort all the SD orders with TVAP_FKREL ne "blank" ,
Now check the status of SD orders @ item level from Table:VBUP ( if billing is done SD order status will get updated as"Complete") , To find out the Billing no, Use doc flow table:VBFA with subseq doc cat:M ( applicable invoice doc cat's) & SD order as selection criteria. -
Nested table for PO Output (Item texts) - trying again.
Hi experts
I posted this question already, but the formatting disappeared, so trying again.
I have created a PDF version of the Purchase Order output. Everything works well, except for the last step - a nested table where I want to display Item texts from the PO for every item.
The steps I followed:
1. In the Interface, I read the item texts, and placed them in an internal table, where the table has a field EBELP (item number) and a field for the text. So, for a PO with 5 items, where 2 items have texts, the table might look like this:
00010 First line of text for item 10.
00010 Second line of text for item 10.
00040 Only line of text for item 40.
2. In the context of the form, I put this table 'under' the existing 'ITEM' entry. In other words, for every item, the texts must be displayed. Obviously I then put in an entry under the WHERE CONDITIONS to say that EBELP = ITEM-EBELP, otherwise it would repeat every line of text for every item.
The problem is that it does not behave quite as I expected. It currently prints:
Item 10 information
First line of text for item 10.
Second line of text for item 10.
Item 20 information
Only line of text for item 40.
Item 30 information
Item 40 information
Item 50 information
Where it should print:
Item 10 information
First line of text for item 10.
Second line of text for item 10.
Item 20 information
Item 30 information
+Item 40 information+
Only line of text for item 40.
Item 50 information
In other words, it simply 'breaks' on change of EBELP, and moves the text to the next line, as opposed to the correct line.
I tried debugging, and it does appear to be doing things in the right order, but it is still doing the output incorrectly. I also searched the forums for similar problems, but I could not find a solution to the problem I am experiencing.
I also put 'dummy' (empty) rows into the table - that fixes it, but then it messes with my layout and I get something like:
Item 10 information
First line of text for item 10.
Second line of text for item 10.
Item 20 information
Item 30 information
Item 40 information
Only line of text for item 40.
Item 50 information
In the above, I don't want the gaps where the empty rows are.
Please advise?
Thanks and kind regards
CasperReposted without formatting...
I have created a PDF version of the Purchase Order output. Everything works well, except for the last step - a nested table where I want to display Item texts from the PO for every item.
The steps I followed:
1. In the Interface, I read the item texts, and placed them in an internal table, where the table has a field EBELP (item number) and a field for the text. So, for a PO with 5 items, where 2 items have texts, the table might look like this:
00010 First line of text for item 10.
00010 Second line of text for item 10.
00040 Only line of text for item 40.
2. In the context of the form, I put this table 'under' the existing 'ITEM' entry. In other words, for every item, the texts must be displayed. Obviously I then put in an entry under the WHERE CONDITIONS to say that EBELP = ITEM-EBELP, otherwise it would repeat every line of text for every item.
The problem is that it does not behave quite as I expected. It currently prints:
Item 10 information
First line of text for item 10.
Second line of text for item 10.
Item 20 information
Only line of text for item 40.
Item 30 information
Item 40 information
Item 50 information
Where it should print:
Item 10 information
First line of text for item 10.
Second line of text for item 10.
Item 20 information
Item 30 information
Item 40 information
Only line of text for item 40.
Item 50 information
In other words, it simply 'breaks' on change of EBELP, and moves the text to the next line, as opposed to the correct line.
I tried debugging, and it does appear to be doing things in the right order, but it is still doing the output incorrectly. I also searched the forums for similar problems, but I could not find a solution to the problem I am experiencing.
I also put 'dummy' (empty) rows into the table - that fixes it, but then it messes with my layout and I get something like:
Item 10 information
First line of text for item 10.
Second line of text for item 10.
Item 20 information
Item 30 information
Item 40 information
Only line of text for item 40.
Item 50 information
In the above, I don't want the gaps where the empty rows are.
Please advise?
Thanks and kind regards
Casper -
Hi All,
I need to get the timestamp and datestamp of creation for EACH line item in a PO. I am using IS Retail. What table can I use?
Thanks all.
KennyHi,
I can get the date from EKPO but where can I find the timestamp?
Thanks.
Kenny -
Table for vendor open item at key date
Hi
Could you please tell me the table which shows me the vendor open item at the date i want. I know BSIK shows open item at current date, but i need the table which shows open item at date i want.
Thanks
SwetaDear Sweta,
I think there is no such a table, as you expect, existing in SAP. As I know here are the
most popular table about Accounting documents.
Accounting documents
BKPF Accounting documents
BSEG item level
BSID Accounting: Secondary index for customers
BSIK Accounting: Secondary index for vendors
BSIM Secondary Index, Documents for Material
BSIP Index for vendor validation of double documents
BSIS Accounting: Secondary index for G/L accounts
BSAD Accounting: Index for customers (cleared items)
BSAK Accounting: Index for vendors (cleared items)
BSAS Accounting: Index for G/L accounts (cleared items)
If you need information about open line items of a certain day, you have to use ABAP.
Regards.
Maxielight. -
Table for Purchase Requisition Item Text
I would like to know, what is the table which stores the item text in tab texts for Purchase Requisition?
Hai,
the table is STXH.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = IT_STXH-TDID "ID
LANGUAGE = IT_STXH-TDSPRAS " LANGUAGE
NAME = IT_STXH-TDNAME
OBJECT = IT_STXH-TDOBJECT
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
TABLES
LINES = L_LINES
Regards,
Venkat -
MRP list out put tables for header and item -reg
Hi ,
What is the table to be used for MRP out put
header is MDKP
for item what is the table ?
regards,
madhu kiranDear,
Tthe MRP item data is stored in a data cluster. The database
table is MDTC, and the data cluster area is ar. Use the following command to
import the data from the data cluster:
Import <structure> from database mdtc(ar) ID <key>.
The ID key value comes from the field dtnum (Number of the material
requirements planning table) in table MDKP
MDKP MDTB MDKP
Please refer this also,
[Table for MRP item|table for MRP item]
Regards,
R.Brahmankar -
Text data is not displaying at Report level for an Infoobject Item name
Hi All,
Texts data is maintained at Info object level but text information is not displaying at Report level for an object. I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information. This problem occured in QA(Quality) system but not replicated in Production system. I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend. In production it is displaying textal data for the IO.
Thanks in advance.Hi All,
Thanks for your valuable information. I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
As per my understanding might be the issue with Patches will be checking with Basis team on the same.
Please suggest if you have any alternatives to fix the issue. -
MB5B Report table for Open and Closing stock on date wise
Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan MHi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber -
Table for getting open PR quantity
Hi
I have one requirement........ I have created a PR for 100 nos. Then I created a PO with ref. to this PR for 25 nos. Now i want to capture how much open PR quantity (75 nos) is present in the system. In which table I can get this information?
Rgds
SarangHi,
There is no need of any Table.. Many reports are there please check.
Pls type SAP1 on easy access menu..
MM>PUR>PR
You will many report trxns..
Thx
Raju -
Name of table for order Vs item category
Hi Experts
What is the table or Function module to get the list of service orders with reference to item categories used in the line item .
Eg : List of orders with item category "ZSR3"
Here my input will be item category "ZSR3" and the out put expected is the service orders which contains the item category - ZSR3.
Regards
RajHello Shantala
thanks for the response
I checked both tables , but i do not find the field for item category in the table . hence not able to get details of order Vs Item category.
Regards
Rajesh S
Maybe you are looking for
-
Files from FTP server to Application server
Hi All, I am new to SDN and SAP XI, can anyone tell me whether its possible to move the files (different strcuture files i.e. some are master data files and some are transaction data file) from FTP server to Application server with one interface. Act
-
HT1495 Two User Accounts on one PC for two different iTunes accounts
this didnt work....I created a new user account on my computer but iTunes keeps telling me that the apple ID is associated with the computer, not the User Account, so it will not let me download new purchases. Do I need two computers
-
Is there any possibility to create ABAP Webdyn pro application in SAP 4.6C
HI All, My client is in SAP 4.6C version want's to devlop some SAP ABAP webdyn pro application for their end user requirement. Is it possible to do so if yes how ,they are ready to buy the required H/W and S/W component for the same,but they can't up
-
"Unexpecte​d Error" When Syncing with Lotus Notes Calendar
I continue to get an "Unexpected Error" message from the Blackberry Desktop Manager when I attempt to sync with Lotus Notes Calendar. I have been syncing without issues for a couple of weeks now; this error just started yesterday. Here are the "Error
-
ALV list with count of the table
Dear all, My requirement is i want display the output as alv list along with the count of the table . i got the count but unable to diplay the below the list. please suggest me. Thanks& Regards, RP