Table for GL line items.

Hi ,
Can anybody tell me what is the table for GL line items in R3 side.
Regards,

Thanks Voodi and Roberto,
Actually I am in need of following.
I need to take all fields from 0FI_AR_3 DS and Additional fields as follows.
Profit centre
Net Due date
FI Document number
Document line number
End customer country code
Group currency (USD)
customer no
End customer country
document no
line item
Note: Only pull in AR documents into the structure that have status of OPEN.
Can I find out all these fields from both these tables?
Regards,

Similar Messages

How to draw horizontal line at the end of table for multiple line items

Dear Experts,
                   Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
Thanks
Ramesh Manoharan

Hi
   I tried as per your logic but it is not solving my problem . when i am gone to table painter it is showing line type 1 and line type 2
is below format.. if u see here line type 1 bottom line and line type 2 top line both are same.. so how to avoid this ?
                          line type 1
                         line type 2

Table for PO Line Items

Hi All,
I need to get the timestamp and datestamp of creation for EACH line item in a PO. I am using IS Retail. What table can I use?
Thanks all.
Kenny

Hi,
I can get the date from EKPO but where can I find the timestamp?
Thanks.
Kenny

FM table for PO line Items

Hi Everyone
While updating the Legacy PO line items in FM I find that the FM account assignment for SES entry is not updated in table EKKN. However while seeing the Commitment Documents through ME23N I find that the FM as well as CO Document is prepared with the same document number as PO number.
Can anyone tell what is table name where this FM document is available so that I can accordingly update EKKN.
As I understand only after updation of EKKN can I run programs like RFFMCHAN and RFFMCHAT.
Thanks in advance
Regards
Virendra Malik

Yeah Eli, Very unusual situation. It comes from an OSS reply wherein it is said that due to some issues in FMN4N this problem persist in the case of SES only. Hence the suggestion to have a z-program to take care of this anomaly. Wonder why SAP is persisting with this anomaly despite knowing about this.
Regards
Virendra Malik

Table for GL line Item

Hi
Pls advice table to get GL line Item actual posting information.
Pls advice table to get the cost center actual posting line item..
Thanx

hi
See the below link for SAP FI table
http://www.sap-img.com/financial/important-tables-in-sap-fi.htm
See the below link for SAP CO table
http://www.sap-img.com/financial/important-tables-in-sap-co.htm
nagesh

Which all tables suffice all line item GL data requirements

Please clarify this requirement for Line Item Data from New GL. my client BMW Inc have configured New GL in ECC 6.0 if i pull all the records to BW from FAGLFLEXA (Line Item Table) is that sufficient to meet the <b>all line item GL data</b> or is there any other tables missing that also shall be combined to bring the Line item GL data. Please help me for this if u can check with any of your friends in FICO.
2. I have seen that BSEG AND BKPF are used earlier in old FI versions so what is there now in New GL ECC 6.0 that will suffice for these BSEG AND BKPF or still i have to pull records by using these tables. for GL Line Item Data.
If you can help me to give the short overview of New GL posting process it would be great.
Thanks
Regards
Soniya Kapoor

Hi Soniya,
FAGLFLEXA & FAGLFLEXT would contain all FI line item
http://help.sap.com/saphelp_erp2005vp/helpdata/en/a8/e26840b151181ce10000000a1550b0/content.htm
Pls assign points as way to say thanks

Userexit for changing line item from header, tcode VA42, VA41

Hi All,
I have a Zfield (VBAK) for the sales document (contract) at the header level in Additional tab.
Also the same zfield is present in VBAP table for all line items.
When this field is maintained by the user using Tcode VA41 or VA42 the line item zfield should also get updated.
I am trying to find out if User Exits
1. USEREXIT_MOVE_FIELD_TO_VBAK
2. USEREXIT_SAVE_DOCUMENT_PREPARE
might work. Can anyone tell me if there is access to line items in the above 2 user exits which I can modify.
Thanks,
Kajal

Hi Breakpoint,
Yes I did use table XVBAP in uesr exit SAVE_DOCUMENT_PREPARE.
But somehow my changed values in XVBAP table is not reflected in the table VBAP.
Am I missing something here.
My piece od code in the user exit :
FORM XVBAP_ZZREBREL_CHANGE TABLES t_xvbap STRUCTURE vbapvb
                           USING P_VBAK_ZZREBREL TYPE vbak-zzrebrel.
data wa_xvbap type vbapvb.
IF p_vbak_zzrebrel = 'X'.
    LOOP AT t_xvbap into wa_xvbap.
      wa_xvbap-zzrebrel = 'X'.
      MODIFY t_xvbap from wa_xvbap INDEX sy-tabix TRANSPORTING zzrebrel.
      clear wa_xvbap.
    ENDLOOP.
ENDIF.
ENDFORM.

Table name for LIV line items

Hi all,
Can anyone provide me the table name for LIV line items? I can only find the LIV header table, which is RBKP.
Thanks.
Rgds,

RSEG

Validation for first line item ( table )

Dear Friends,
i have table with multiple line items, i want to validate first line item only, if first line item is initial, it should throw an error message, could any one pls help me with an example
Thanks
Vijaya
Col1
Col2
Col3

Hi Vijaya,
Method get_static_attributes_table of interface if_wd_context_node will return a table of context elements. You can then either read the first row of that table or loop through it to validate the table's data and issue messages as needed. For example...
data lo_nd_ctx_node type ref to if_wd_context_node.
data lt_attributes_table type wd_this->elements_ctx_node.
lo_nd_ctx_node = wd_context->get_child_node( name = wd_this->wdctx_ctx_node ).
lo_nd_ctx_node->get_static_attributes_table( importing table = lt_attributes_table ).
If the row to be validated happens to be the table's lead selection, you can fetch attributes of the lead selection row directly, and again validate and issue messages as needed...
data lo_nd_ctx_node type ref to if_wd_context_node.
data lo_el_ctx_element type ref to if_wd_context_element.
data ls_attributes type wd_this->element_ctx_node.
lo_nd_ctx_node = wd_context->get_child_node( name = wd_this->wdctx_ctx_node ).
lo_el_ctx_element = lo_nd_ctx_node->get_element( ).
lo_el_ctx_element->get_static_attributes( importing static_attributes = ls_attributes ).
Both of these code patterns to read context data are available through the Web Dynpro Code Wizard.
Cheers,
Amy

To Set Goods Receipt Indicator For Particular Line Items In SRM

Hi All,
i am working on BBP_DOC_CHANGE_BADI in SRM. i am trying to set the goods receipt indicator for particular line items based upon certain conditions. The values are being set in the badi. But when the Purchase Order is created in the backend R/3 i coudn't able to find the goods receipt indiactor being set..
i used this field to set the GR indicator
GR_IND = 'X'. " Goods Receipt Indicator
Can anyone help me in this?
helpfull answers will be rewarded....
Thanks,
Murali

To Murali and Christophe,
I have set the GR and GR non val indicator in CREATE_PO BADI but I face the following situation :
problem -
In case of multiple account assignment in the shopping cart, the R/3 transaction ME21N sets these flags.
The flag status determined as per EBP conditions is lost.
I need to retain the flag status as per EBP conditions even in this multiple account assignment scenario.
proposed solution -
- CREATE PO badi is already implemented in EBP and customised logic for GR and GR non valflag is in place.
- I create user exit in R/3 backend system in ME21N transaction
- I make RFC call in this user exit to EBP and check the table BBP_PDPSET for the shopping cart.
This is how I get the flag status as per EBP conditions and copy the same to R/3 thereby overriding the multiple account assignment check of the R/3 system.
issue -
When I tried to verify that I can check the BBP_PDPSET table from R/3, I found that this table is not having entries for all the records in CRMD_ORDERADM_I table.
For which shopping carts will the BBP_PDPSET table not be populated ?
thank you in advance,
Bhakti.

Vendor field empty for RE line items in FBL3N

dear all-
I'm experiencing a strange situation. Instead of using the MM-report, I want to do a GRIR analysis in FI. When I run FBL3N for the GRIR account I see that for the goods-receipt related documents (doc type WE) field like puchase order and vendor number are populated (and contain a value). However for the line items that come from the invoice the field purchase order is filled but the field vendor is blank.
I did have a look at the BSEG table for the WE- and RE-related documents: for all line items of the WE document (goods receipt) the fields purchase order and vendor contained a value, for the RE document (invoice receipt) all line items have a value for purchase order but only the first line item (vendor line) has a value for the field vendor. On all the other line items the vendor field is blank.
Looks pretty strange to me, who has a good solution?
thx
Ben

hi Vishal-
Thanks for the BSIK, BSIS tip!
In the meantime I did find report RFWERE00. I was able to generate a list that indeed showed the vendor number on the GRIR account both from the GR- and RE-document. Didn't have time yet to go over the code to figure out where this report gets its data from.
The report offers options to do actual clearing and do postings ... I'm not interested in that. Only in the list. I have a start now ...
... If you have another I idea that prevents me from creating a customer report ... I'm eager to hear it!
rgds
Ben

Header Details to be Printed only for the line item details.

Hi All,
I have the following requirement.
I have Page1 with the Logo, Header Window, Vendor Window, Send Invoice To, Delivere Invoice To and Main Window. Main Window Starts from the middle of the page. In the Page2 i have Logo, Header window and Main Window. In the Page3 i have only Main Window.
In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3.
The requirement is Logo,and Header Window should appear only for the Line items and not for the Terms and conditions.
For the Page1 i have given the Next Page as Page2. Suppose if there is only one line item then it Prints in the first Page itslef and the control flows to the Page2 and since in the page2 i have given the condition for the Logo and header window to print only if line item is more than 1 and since Main Window is starting from the middle there is a blank Space appearing in the start of the page.
The command i have given in the footer to trigger new page that is page3 is not getting triggered. If there are more than one line item then its printing the logo and header window and so there is no blank space appearing and it is working fine.
Please let me know how to avoid this blank space and move my main window to the start of the Page if there is only one line item.
Thank you.

Dear Vasudha,
I am a little bit confused regarding your query,
"In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3. "
When you say footer of main window does it mean , that you are using a table inside your main window and the command node your have inserted is in the footer of the table ?.I hope it is, because my suggestion is based on this assumption.
Well my suggestion for your issue is,
1.I hope you are aware we can trigger a next page in two ways, one by setting the next page static attribute & second using the command node which you have used.In your case you will have to use a combination of both.
2.I feel your First page design is ok. Set its static next page attribute to PAGE2. Similarly set the static next page attribute for PAGE2 as PAGE2 itself. This should take care of your table which you have placed in the main window. If the table contains only one lineitem it will get over in the first page itself. If the lineitems are more in the table, it will automatically triggerPAGE2 (since static next page attribute for PAGE1 is PAGE2) and the remaining line items will be displayed. Now no matter how many lineitems you have ,PAGE2 will be triggered repeatedly(since static next page for PAGE2 is PAGE2 itself) until the entire data in your table is displayed.
In this way your requirement of printing the logo and header windows for the data lineitems only will be fulfilled.
3.Now the last catch in your case is the printing of PAGE3(The terms and condition page) on an entirely new blank page.
In the footer section of the table which you have used, use a command node set to PAGE3. After the command node and under the same footer section now insert your terms and condition lineitem.
Also Check the "at End of table" checkbox and uncheck " AT PAGE BREAK" under OUTPUT OPTIONS tab for the footer section.
So now this footer section will be triggered only once after all the data in the table is displayed
4. So now if there is only one lineitem, before the default second page is triggered the command node will trigger the PAGE3 and the terms and condition will be displayed.Else if there are more lineitems the page2 will be triggered again and again and finally when all the lineitems are over, the footer of the table will get triggered. So the command node will take you to the PAGE3 wherin the terms and condition will only be displayed.
Hope this helps.
Regards,
Riju

How to get the texts for each line item for Sales order in a smartform

I'm createing a smart form in which i need to display certain texts for each line item of a sales order. How can i get those??
I'm trying with the table STXH and FM read_text... but i'm not clear how and what i'm getting... can anybody pls help me.....

Hi There,
But then i will be getting only the value. i want to link that against the particular material of the Purchase Order.
Like for ex:
PO No. Material Code        Line Item        Basic        Excise       Tax       Inv Value
0000001 5000251                010               100           16         4.64      120.64
0000001 5000252                020               200           32         9.28      241.28
Can u help me on this?
Regards,
Jitesh

BAPI_PR_CREATE for Service line items only

Hi All,
We are unable to create the Purchase Requistion Order using the BAPI_PR_CREATE for Service line items.
The Error Message 436(06) " In case of account assignment, please enter acc. assignment data for item" is always received with respect to Account Assignment.
We are currently using ECC 6.0 EHP 4. SAP instance to create the Purchase requisition order.
We already did this analysis and came to this include previously for the Error Message 436(06) and could find thatt the accounting tables are not filled.
Also, the accounting items table is refreshed and deleted in 3 places in the code.
We did put debug on that u2026 but during debug, the control does not go to these places.
I suppose there is some other major functionality related to Service PR is missing in the BAPI_PR_CREATE.
Also we are unable to find the detailed documentation.
Thanks and Regards,
Shivakumar K.

Hi Shivakumar,
                                                                                Hi Shivakumar,
in most of the cases this error - 06 436 - happens due to wrongly filled BAPI structures.
Please check the entries in the x-structures in first line, for example:
PRACCOUNT structure
PREQ_ITEM                      00010
SERIAL_NO                      01
GL_ACCOUNT                     2222222
COSTCENTER                     SAP-DUMMY
PRACCOUNTX structure
PREQ_ITEM                      00010
SERIAL_NO                      01    <<<<
GL_ACCOUNT                     X
COSTCENTER                     X
SERVICEACCOUNT structure
Line 1:
DOC_ITEM                       00010
OUTLINE                        0000000001
SRV_LINE                       0000000010
SERIAL_NO                      01
SERIAL_NO_ITEM                 01
SERVICEACCOUNTX structure
Line 1:
DOC_ITEM                       00010
OUTLINE                        0000000001
SRV_LINE                       0000000010
SERIAL_NO                      01       <<<<
SERIAL_NO_ITEM                 X     <<<
Regards,
Edit

How to find out Last Changed Fields for a line item of a PO

Dear All,
Pls let me know is there any FM or procedure to find the last changed fields for each line item of a PO. I should be able to get the details on the basis of Last changed Date. Can u pls guide me in this?

Hello,
Check the table CDHDR,CDPOS for PO items,
Check this code:
REPORT ZV_GET_LATEST_SO .
DATA: BEGIN OF ITAB OCCURS 0,
        OBJECTCLAS TYPE CDHDR-OBJECTCLAS,
        OBJECTID TYPE CDHDR-OBJECTID,
        CHANGENR TYPE CDHDR-CHANGENR,
        USERNAME TYPE CDHDR-USERNAME,
        UDATE TYPE CDHDR-UDATE,
        UTIME TYPE CDHDR-UTIME,
        TCODE TYPE CDHDR-TCODE,
        TABNAME TYPE CDPOS-TABNAME,
        TABKEY TYPE CDPOS-TABKEY,
        FNAME TYPE CDPOS-FNAME,
        CHNGIND TYPE CDPOS-CHNGIND,
      END OF ITAB.
TABLES: CDHDR,CDPOS.
DATA: LT_CDHDR LIKE CDHDR OCCURS 0 WITH HEADER LINE,
LT_CDPOS LIKE CDPOS OCCURS 0 WITH HEADER LINE.
*REFRESH AUSG.
CLEAR CDHDR.
CLEAR CDPOS.
CDHDR-OBJECTCLAS = 'EINKBELEG'.
CDHDR-OBJECTID   = '0000001784'. " Purchase order number
**SELECT A~OBJECTCLASS A~OBJECTID A~CHANGENR A~USERNAME A~UDATE A~UNAME
**B~TCODE
**B~TABNAME B~TABKEY B~FNAME B~CHNGIND INTO TABLE ITAB FROM CDHDR AS A
**INNER JOIN CDPOS AS B ON A~OBJECTCLASS = B~OBJECTCLASS
**                         A~OBJECTID    = B~OBJECTID
**                         A~CHANGENR    = B~CHANGENR
**                    WHERE OBJECTCLAS = 'VERKBELEG'
**                      AND OBJECTID = '0000001784'.
*SELECT * FROM CDPOS INTO TABLE LT_CDPOS WHERE OBJECTCLAS = 'VERKBELEG'
*                                    AND OBJECTID = '0000001784'.
*IF NOT LT_CDPOS[] IS INITIAL.
* SELECT *
* INTO   TABLE LT_CDHDR
* FROM   CDHDR
* FOR    ALL ENTRIES IN LT_CDPOS
* WHERE OBJECTCLAS = LT_CDPOS-OBJECTCLAS
* AND    OBJECTID = LT_CDPOS-OBJECTID
* AND    CHANGENR = LT_CDPOS-CHANGENR.
*ENDIF.
** SORT ITAB BY OBJECTCLAS ODJECTID DESCENDING.
*LOOP AT ITAB.
* WRITE: ITAB-UDATE."ITAB-UNAME.
*ENDLOOP.
*--- Interne Tabellen -------------------------------------------------
DATA: BEGIN OF ICDSHW OCCURS 50.       "Ausgabeaufbereitung
        INCLUDE STRUCTURE CDSHW.       "Zwischendatei
DATA: END OF ICDSHW.
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
     EXPORTING
          DATE_OF_CHANGE    = CDHDR-UDATE
          OBJECTCLASS       = CDHDR-OBJECTCLAS
          OBJECTID          = CDHDR-OBJECTID
          TIME_OF_CHANGE    = CDHDR-UTIME
          USERNAME          = CDHDR-USERNAME
     TABLES
          I_CDHDR           = LT_CDHDR
     EXCEPTIONS
          NO_POSITION_FOUND = 1
          OTHERS            = 2.
LOOP AT LT_CDHDR.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
    EXPORTING
*   ARCHIVE_HANDLE                = 0
      CHANGENUMBER                  = LT_CDHDR-CHANGENR
*   TABLEKEY                      = '00000000 '
*   TABLENAME                     = ' '
* IMPORTING
*   HEADER                        =
   TABLES
     EDITPOS                       = ICDSHW
*   EDITPOS_WITH_HEADER           =
* EXCEPTIONS
*   NO_POSITION_FOUND             = 1
*   WRONG_ACCESS_TO_ARCHIVE       = 2
*   OTHERS                        = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ICDSHW.
    IF ICDSHW-TABKEY+3(10) = '0000001784'
       AND ICDSHW-TABKEY+13(6) = '000001'.
    ENDIF.
ENDLOOP.
ENDLOOP.
Vasanth

Table for GL line items.

Similar Messages

Maybe you are looking for