Report to bring CATS Time data changes

Hi,
I need a report to bring CATS Time data changes during a certain month.
Is there any report that does this?
And is there any idoc that is populated with this information and a report to create it?
Or for example a function that returns this information.
Thanks.
Sónia

HI Sonia,
Try to use the bapi: BAPI_CATIMESHEETRECORD_GETLIST
Regards,
ravi

Similar Messages

1231AP Time/Date change

The only way I can figure out how to change the time/date on 1231ap's is through telnet/console. Any way to do so through the web interface?

Hi Dave,
I beleive you can change the Time and Date via the Web Interface, navigate to Services--NTP. There you will find a section named "Time Settings".
Also, here is a link to the Commands;
Cisco IOS Commands for Access Points and Bridges
http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/command/reference/cr38main.html#wpxref51884
Hope this helps!
Rob

Time Date change

I have tried to change the time & date on my 6500a officejet printer...
I have used the EWS web page..when I do attempt to change either
date or time I get an error...
What Am I missing
Thanks in advance

Dear Customer,
Please follow these steps to set the date and time from the control panel.
1. Press Setup .
2. Use the right arrow button ( ) to highlight Tools , and then press the OK button.
3. Select Date and Time from the Tools menu and then press the OK button.
4. Enter the month, day, and year by pressing the appropriate numbers on the keypad.
After the date is entered, the Enter Time screen displays.
5. Enter the hours and minutes by pressing the appropriate numbers on the keypad.
After the time is entered, the Tools menu displays.
6. Press the Back button to return to the main menu.
Please revert for any clarification
Regards,
K N R K

Issue with time/date change.

Hello,
I'm having issues after changing the time/date zone settings, after I change the time zone (new setting), apperently it is correctly saved while exit (it prompts), but when I return to see the time/date settings once again, the timezone remains the same as the old setting.
I've tried by changing the source type: Blackberry, Network or Off but its the same.
What can i do to solve this? firmware update?
Thanks in advance,
Regards.

Ok, I was at the Apple Genius Bar yesterday, and among other things to address my frequent beachball concerns, the Genius repaired disk permissions and reset network settings.
I checked the automagic time/date/time zone settings, and it worked perfectly.
I get home, and the MacBook thinks I'm back in Rexford, Idaho again, throwing off my time zone and time. Argh!

Report to display material master data changes

Hi,
Is there a standard report available to display all changes to material master data over a specified time frame i.e all changes made alst week,all chnages made today.
Please suggest.
Thanks in advance.

Hi!
Appart from MM04, you can also have a look at MM03 or MM02:
1. Goto MM02 or MM03 transactions and enter the material.
2. Select the relevant views for which you want to have the details.
In the Bar menu follow the path Environment -> Display changes.
Here you will get the list of changes done to the fields with Old and
New values.
Appart from these two tools, there is not any other report provided in the standard for this target.
I hope this helps!
Esther.

WTH Time & Date Changed On It's Own!!!

So yesterday afternoon my Z30 tripped out and set the time and date to 10:28am 2/21/2014. It was 4/232014 and about 2:45pm.
I did not have it set to sync the time and date automatically in the settings. I did however go and set it so it would go back to the real time and date but it did not change the time and date to what it was supposed to be.
Then I started getting alerts about how my SSL certificates were messed up for my email accounts (three total).
I set the proper time and date, then shut the phone off and turned it back on.
Then my work account started loading up close to 1000 old messages (I had it set to only sync the last 30 days) and it was loading up into February.
So I deleted that account and reloaded it.
Why would this happen?
I had an older BB since 2008, ran it for eight years and then another two and it never did this, had an iPhone for a year plus and it never did this.
Should I expect this to happen every few months (bought the phone new mid February 2014)?
Great phone, but this kind of stuff is strange, somewhat disconcerting and simply should not happen.

I only point ot the certificate based on your other information posted, could be purely coincidental, perahps not.
JimmyJ111 wrote:
In settings "set date and time automatically" was "off".
On the same screen, at Auto Update TimeZone, that was set to OFF as well?
Both settings were off?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IPhoto Time/Date Change problem

There is one particular event in my iPhoto program that registered the wrong date when downloaded. In trying to change it, the program automatically sets the date about 130 years earlier, regardless of what date I type in. It only happens with this one file. I have had to change others and they have worked fine. Does anyone know how I can fix this problem? After repeated attempts, I'm back to the 1600s!

How are you trying to change the date? iPhoto has two methods - "Photos > Adjust Date and Time" and "Photos > Batch Change > Set Date and Time".
If you not yet have tried "Batch Change", try if that will help, if you use the option "Modify Original File".
Only "Batch Change" will set all selected photos to the same date and time, with an optional increment. So you to correct the images in groups of photos taken at the same time.
Regards
Léonie

Automatic approval of CAT time data

Dear All,
Generally the boss should approve the working times of the employee in CATS. But the issue is that once the employee click on release button, timesheet gets approved automatically. But this approval should be done by supervisor. He was not facing this problem earlier.
I checked the Org Chart, I dint find any error there.
Please guide me which settings shall I check for this?
Regards,
-Tina

Hello sir,
I could send you but we already have help.sap.com documentation so I am directing you to the fine links:
This is the root for Approval on CATS:
--> http://help.sap.com/erp2005_ehp_04/helpdata/EN/64/4003fb470211d189720000e8322d00/frameset.htm
Please check:
- Deciding on the Approval Process
- Approval Based on Recorded Working Time Attributes
- Approver Selection AND
- Applications for Approving Working Times -> regarding the workflows that you can use
I hope I have contributed sir.
Regards,
Bentow.

Computer Time/Date Changes to December 31, 2000????

Okay this is really weird. I opened up my MacBook Pro after it'd been in sleep mode and the display wouldn't show. So I held down the power button, booted it back up, and my date was set to December 31, 2000, and the clock was about an hour behind. It had also forgotten my password for the network I'm usually logged into.
What kind of issue is this? Is it just a freak occurrence of should I be expecting this to happen again?

That means your PRAM battery is most likely dead. It maintains settings such as Time and Date.
Try posting this in the MacBookPro power and battery forum. I know Tower Mac battery info but am not well versed on portable Mac's PRAM batteries. I do know it is separate from your main battery.
DALE

More Image Time/Date Questions

I hate to keep bringing up Time/Date/Time Zone related issues, but it seems I have another...
I have certain images for which I have changed the date and time and time zone. The metadata reflects the proper time, date and time zone, but oddly, when I filter the images based on "Capture Day of Month" I get results that cause me problems.
For example, I have an image that was shot on 1/15/2007 at 2:14 AM GMT + 7:00. This is what the Metadata tells me. When I go to Metadata -> Adjust Date and Time, it tells me that the Original was shot on 1/14/2007 at 2:14 PM. (It doesn't tell me the Time Zone of the original here).
When I do a search in this project for all images shot on the 15th day of the month, this image does not show up in my results. The metadata says 1/15, but the original says 1/14. This is an issue for filtering purposes and leaves me wondering how many images get left out of my filters when I apply them.
This could be an odd case because I might not have managed the time/date/time zone properly on import. I did try to change them to the correct time/date/time zone after the fact and thought all was good until now.
Does anyone know how I can rectify this situation? I just want to make sure that the time/date/time zone of all of my images is correct.

Nathan,
I just got back from some travels. I just checked again and it seems to now be working. It really is the strangest thing. Basically, I checked it both ways. I went into a project that had images from multiple days (I now want to separate my images into projects by the day they were shot on). I picked two filter scenarios: 1) "Date", where I specified, "Capture Day of Month" "is" and I typed "15" and 2) "EXIF", where I specified, "Capture Day of Month" "is" and I typed "15". It did not work when I had all of the images lumped into one project. I subsequently manually sorted my images by looking at the date of each one before moving them into their new respective projects. Now that they are in their own projects, it seems to working.
Aperture has a long way to go to make time management simple and accurate. There are a lot of things going on (where the image was shot, what the camera time was set to, which time zone the computer is in when you import the images, how the time settings on the computer are configured, etc, etc...). It really is a lot to manage. Thankfully, Aperture allows you to correct these issues, but it doesn't make the task simple nor straightforward.
Perhaps it is a camera issue and not a software issue? Maybe camera manufacturers need to make their products more like our phones, where the time is registered automatically based on your GPS location. I am not sure if GPS enabled cameras have this capability. The computer should be able to recognize this GPS stamped time and embed the data directly into the image. Science fiction? Perhaps.
There are far too many obstacles that get in the way and mistakes are easily made along the way. As mentioned, Aperture allows you to correct these "mishaps", but not with the type of ease you would hope for. Unless you shoot and upload all of your images in your own time zone and have your camera clock and computer clock synced and set correctly, you are bound to have inaccuracies along the way. This is a shame for those who try to manage this stuff down to the "T".
Sorry for my rant as I have digressed from the topic at hand.
I have begun to import my images under a system mentioned by another user in a different thread (I will have to go back to find his alias). I basically set my camera to UTC time and then upon import set the actual time to the time zone that I shot the images in. This saves me from having to reset my camera every time I change time zones and from also having to adjust it during daylight savings time.
This alone seems to have solved my issues for now and going forward. I still run into issues upon import though from time to time that are perplexing as they are frustrating. For example, I just got back from Houston, Texas. I live on the East Coast. The first issue I had is that the import dialogue box doesn't tell you the "Adjusted Date and Time" correctly (or so it seems to me). After importing the images, the date and time is correct, but this is not reflected during import, nor communicated in the import dialogue which always confuses the heck out of me.
I blame part of this on the fact that Aperture is probably seeing the original in UTC time. It is then correcting it based on the time zone that I chose (CST), only I am importing in EST. It all adds up to a bunch of confusion. Even after trying to decipher it all and by doing the math, I still don't think it adds up correctly in the import dialogue. When I make adjustments to the time, date and zone during import, the data always looks incorrect in the import dialogue. This I have tested over and over again. I would be surprised if I am the only one who notices this. I can't figure out why it happens. The good news is that the actual images do have the correct date, time and time zone after import, but this anomaly still makes it confusing during import.
The second thing I am noticing is that these images, which do show up correct, don't always import correctly when you auto-split your projects into days. For instance, if the original image (UTC time) was on the 15th, but the corrected image ends up on the 14th, that image doesn't get sorted with the other images that were shot on the 14th (even though this image was shot on the 14th in the time zone you shot it. This is obviously the time and date you want associated with the image). This again makes importing a pain in the you know what and very confusing.
A third thing I've noticed is that there is no way to check only the images for a certain day. You have to uncheck everything and then check (individually) each image from a given day. This is not a good system nor workflow. In order to avoid it, you have to import everything at once and then separate your images into projects later. This also isn't a good system for obvious reasons.
I don't mean to turn this thread into a "What's wrong with Aperture import" discussion. Most of what I am describing would probably be better served as part of a feedback request to the Aperture team. I will certainly get to that as well.
There is another confusing thing to me though based on the original part of this discussion thread. The image that I was originally describing - the one where I shot it on 01/15/07 at 2:14 AM GMT +7:00 (which shows up as originally being shot on 01/14/07 at 2:14 PM (I get this by going to "Metadata" -> "Adjust Date and Time". The thing I don't understand is why the original even says that. When I adjust images, I always apply those adjustments to the Master. How do I actually get this to reflect, as it seems that it is still being read with an original time as the incorrect time and date? Also, why - upon making a time and date adjustment - does Aperture tell you that this action cannot be undone? It seems you can make as many changes as you want, and even changed the images back to the original time and date.
Anyway, that's it for now. I hope I haven't confused you with this lengthy discourse.
Mac

How can data in cube will update after Master data changes

Hi,
We have a Revenue cube which we are loading actuals after every month.
Now we have master data changes at profit center level. Profit center is moving from Holdings to Power, effective with October reporting. So master data we updated accordinglt now we need to update data in cube.
I want know how can we update all the data in cube without dropping and relaoding again.
We have DS0s first then cube.
Please let me know available options.
Thanks
Sivaprasad

Hi,
Make the field which stores data whether it is holding or power as navigational attribute of profit centre.
So whenever master data changes just update profit center master data . Use this nav attribute in reports.
So whenever master data changes report changes automatically.
If you want time dependant 2008 to 2009 Holdings then 2007 power enable profit center time dependant master data.
Hope it helps.
Thanks,
Arun

Universe export - data changes not reflecting in Report

Hi
The changes and the latest updates in the database are not reflecting in reports,
even if i export the universe again.
and i have refreshed the reports, that even not reflecting.
i did Edit query and Run query this action also not bringing the latest data to reports
why this happens ?
how to solve this issue ?
Regards
Dineshkumar

You can search for KB articles on SAP Service Market Place .
Here is first :
Symptom
You make changes a local Universe in Designer.
When refreshing the report, in Desktop Intelligence, the results do not reflect Universe update.
It used to be enough to simply refresh report's data, for Dataprovider to show object changes from the Semantic layer.
Change of behaviour in SP3 codeline: the DeskI Query Panel does not automatically pick up the latest modifications made to the local Universe.
Reproducing the Issue
Using BusinessObjects Desktop Intelligence XIR2 SP3:
Using your universe (eFashion), create and refresh a simple Desktop Intelligence report (.rep).
Make a simple change to the universe (like renaming a field/ object name) and save these changes.
Go back to the open DeskI report and try to refresh the data provider using: 'Data/Refresh Data'.
This will not show the latest changes.
However, if you follow the same workflow using XIR2 SP2, the universe update will be immediately visible (in the report) simply after refresh.
Cause
This is not a product regression, but intentional change in application's code delivered with FixPack3.1.
Fix Request ADAPT00818520 changed the application's behaviour: << When a restricted user is logged on to view a Desktop Intelligence document, prompt windows may be slow to open. >>
Resolution
In Desktop Intelligence menu, go to: Tools > Universes
Click 'Refresh'
Select and 'Import' your universe
Next, go to toolbar menu: Data > Edit Data Provider
In Query Panel, click 'Run' to regenerate the Query and interrogate the updated universe.
Only after following these actions will the .unv ammendments be visible in the report.
Here is second :
Symptom
Changes to object made for the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
Desktop Intelligence (Deski) Report still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
Row level Restriction is not applied correctly in InfoView(View Mode) when 'Allow selection of multiple Contexts' checked in the Universe Designer
Environment
BusinessObjects Enterprise XI 3.1 Service Pack 2 Fix Pack 2.6
Reproducing the Issue
Changes to object made in the Universe is not affected in InfoView(View mode) when 'Allow selection of multiple Contexts' is checked in Universe
1. Log in to Designer
i) Import Island Resort Marketing
ii) Go to Universe Parameter >> SQL
ii)Uncheck Allow Selection of Multiple Context
2. Create a new Desktop Intelligence(Deski) Report based on Island Resort Marketing
i) Drag the object Country in the Result's Pane
ii) Save and Export the report to the repository.
3. In Designer Change the Object Country under Resort from Resort_Country.country to
i) Resort_Country.country+'ddd'
Note: Uncheck Allow Selection of Multiple Context
ii) Save and Export the Universe
4. Log in to InfoView
i) View the report
ii) Refresh the report
iii) Changes to the object taken place i.e Country is concatenated with ddd
5. In the Universe Designer, change the Object Country under Resort from Resort_Country.country to
i) Resort_Country.country+'eee'
Note: Check Allow Selection of Multiple Context
ii) Save and Export the Universe
6. Log out from InfoView and login again
i) View the report
ii) Refresh the report
iii) Changes not taken place. Shows only Country instead of Country concatenated with eee.
Row level Restriction is not applied correctly in InfoView(view Mode) when 'Allow selection of multiple Contexts' checked for the Universe.
Import efashion Universe
Drag the Outlet_Lookup table into the objects pane on the left hand side
Create Row Level Restriction on the state field of Outlet_Lookup table as Outlet_Lookup.State=(u2018Texasu2019)
Apply the restriction to Administrator
Save and Export the Universe. Note: Uncheck Allow Selection of Multiple Context in Universe Parameter>>SQL
Log in to Desktop Intelligence (Deski) as administrator with Enterprise Authentication
Create a new Deski report
Drag the object state from the Outlet_Lookup table to the Results pane
Observed that the administrator is able to see only Texas which is expected behavior
Save and export the report
Log in to Infoview as Administrator
View the report. Refresh the report
Observed that the administrator is able to see only Texas which is expected behavior
Log in to Infoview as any user say Test User
View the report. Refresh the report
Observed that Test User is able to see all the states which is expected behavior
In the Universe Designer, Check Allow Selection of Multiple Context in Universe Parameter>>SQL for efashion Universe
Save and export the Universe
Log in to Infoview as Test user
View the report
Refresh the Report
TestUser is able to see only Texas which mean that the restriction is applied to Test User also
Cause
This is by Design as the 'Allow selection of multiple Contexts' forces selection of the context, which is not possible in Infoview, so that in Infoview it is assumed the Context is already selected and no SQL regeneration is required.
Resolution
Problem Description: Changes to object made in the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
Explanation:
If we modify an object and selects also the option 'Allow selection of multiple Contexts', it means that potentially there is more than one SQL that can be generated with the use of that object. Hence if a report is created in Deski, run and exported to enterprise, that means, one particular context (SQL) has been selected.
If you then update one or more of the objects again, the SQL will have to be regenerated in Deski for the right context to be selected for that particular report.
Therefore, if this option is used, for the objects to be updated, the SQL of the report will have to be regenerated in Deski, run and export it back to repository, then refresh the report in InfoView.
For Deski reports viewed in InfoView, it is not possible to evaluate the context on refresh. The report will always use the context stored with the report and same for the SQL. Therefore the Deski report will need to be imported locally, refresh it and then export it back to repository for the changes to take place.
Problem description: Desktop Intelligence (Deski) still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
Explanation:
The option 'Allow selection of Multiple Contexts' in Designer is not to disable the prompt. It will prompt you to select context if the object used is associated with context. The option is just to allow Deski to select multiple contexts at a time if in case the object used is associated with multiple contexts and accordingly generates the SQL.
However if we uncheck the option even if there are multiple contexts associated with the object used, it will allow selection of only one context at a time.
Problem Description: Issue with Row level Restriction when refreshed from InfoView with 'Allow selection of multiple Contexts' checked for the Universe.
Explanation:
We first have to regenerate the SQL in Deski, then export it to repository and refresh from InfoView for the changes to take place correctly. The explanation above applies.

UWL CATS time approval error "No data exists that needs to be approved"

Hi all,
We approve CATS working time through SAP portal UWL. The user can see the workitem in her UWL inbox, but got an error u201CNo data exists that needs to be approvedu201D when he tried to execute the workitem. But the user is able to execute the workitem using Business workplace in ECC. We are using the standard UWL application.
This happens only to CATS time entries for certain type of employees (for example, the employees who do not report directly to the approver).
SAP Portal 7.0
SAP MSS 600 SP19
SAP UWLJWF 7.00 sp23
SAP ECC 6.0
Here is what I have found from my trouble-shooting. When I test (preview) the UWL iView, it seems to be working fine. But when I call up the iView from the portal MSS role, I got the error message u201CNo data exists that needs to be approved.u201D
Please let me know if you need more information.
Thank you,
Qi

I have found that the workitem ID is not passed to the CATS approval web dynpro program. Here is what is in the Item Type configuration XML. Is there anything missing?

    <ItemType name="uwl.task.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.OpenTasksTimeApp" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria externalType="TS31000007" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="CatManagerApprove"/>
            <Property name="WebDynproDeployableObject" value="sap.com/msscatapproval"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="true"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
    <ItemType name="uwl.forwardedtask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.ForwardedTimeApp" defaultAction="viewDetail"/>
    <ItemType name="uwl.futuretask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.FutureTaskTimeApp" defaultAction="viewDetail"/>
    <ItemType name="uwl.completedtask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.CompletedTimeApp" defaultAction="viewDetail"/>
Thanks,
Qi

Time/date on my iPhone changes every time I sync with iTunes - any fix?

Hi All,
Every time I sync my phone with my computer, the time and date on my phone changes - it goes to one week behind, and about 10 hours earlier than it actually is. My computer calendar has the right time (NYC time zone), the calendar support settings on my iPhone are set to NYC time zone - what could be happening? Any ideas?
Thanks,
Maria

msteinny,
So i went to the apple store to meet with an apple genius to ask him why my phone's time kept moving up 1 hour everytime I synced my phone. Well he said that he's never seen this problem before, and after a trying a reset and restore he let me exchange my phone. The problem is that when I went to sync my new phone the problem still persisted. They told me it was probably something to do with my computer and its time zone settings.
So I get home and click on my computers clock in the bottom right hand corner to bring up the date and time properties and sure enought my time is correct, the date is correct and the time zone is correct (Eastern Daylight Time). So I look through the different tabs (Date & Time, Time Zone, Internet Time). The first thing I tried to do was to change where my computer syncs its internet time. It was originaly set on NIST time. I then switched it to Windows time, but this didn't do anything. My clock would still change when I synced to itunes. The next thing I tried was fideling around in the Time Zone tabs. I noticed that the box that says "Automatically adjust clock for daylight savings" was unchecked, so I checked it and my computer's time jumped an hour ahead. So I left the box checked but moved my clock one hour back (to the correct time), clicked on apply and left it at that. I synced my iPhone and voila! The time didn't change! It stayed on the correct time! To to make a long story short, make sure that you computer's clock is set on "automatically adjust clock for daylight savings changes, make sure your time zone is correct, and that the time is right when that box is checked. I hope this helps you. I'm glad I got a new phone out of the deal;)
Chris P.

Report on Opportunity Close Date Changes

I would like to create a report showing all deals that have had changes made to the Close Date. I am trying to create it from the Pipeline History section of the Analytics, but I am not sure which fields I can use, if any.
Any suggestions?

That is a very creative solution, Dale. I do have a couple of "what ifs" for you.
What if the Close Date is 10/30/2007... I change this to 10/15/2007 - a change of -15 days. Then I realize that I meant to change it to 11/15/2007 and changed it again. Would this create a problem for the report since the change amount would now show a 30-day change when it is really a 15-day change?
Another scenario has the date change twice in one week, between times that the report is run. The original date of 10/30/07 changes to 11/15/07 and then the next day changes to 12/15/07. How does this affect the report?
When we get to the point that the audit trail becomes reportable, this problem is solved. Until then, it is quite the puzzle. I think your solution potentially solves part of the problem, but depending on how much that date field actually changes and how often you run your report and which fields are needed in that report, it could return misleading data as well.
This is a very interesting problem. Dale has come closest to a solution so far. Any other suggestions for DavidG? I am drawing a blank on it so far.

Report to bring CATS Time data changes

Similar Messages

Maybe you are looking for