Report to see cost of PM order on Cost Ctr
Hi friends ,
I have created an PM order with reference to Equipment E1 having Cost Ctr C1.
Now in my order there is only Plan cost = 2800/- . actual cost is still zero .
Can I see this plan cost Cost Ctr wise.
I have tried with
S_ALR_87013611, S_ALR_87013612, S_ALR_87013613
But these are showing no data.
I have tried
S_ALR_87012993 , S_ALR_87012994, S_ALR_87012995, S_ALR_87012996
S_ALR_87012993 is showing following values on executing against my PM order no :
Actual = blank Plan = 60.19 Var(Abs) = 60.19- Var.(%) = 100-
How the above values are related to my cost ctr
Hi Friends ,
I got my solution .
One is we can use the reports that I have mentioned above or we can also use IW39 as syggested by Jitendra.
and 2nd thing I asked about cost - 60.19 /- how related to my orders . I have checked , actually our controlling area
was having currency USD associated with it. So the report was showing me data in USD not in INR.
thnx to all for time and help
Edited by: Amehra on Jul 3, 2011 9:33 AM
Similar Messages
-
Standard Report to see list of purchase orders with Payment terms
Hi ,
I want to see list of purchase orders with corresponding Payment terms.
Is there any standard report available ?
I checked ME2L, ME2M , ME80FN and ME81N ...
But there is no option to add payment term field ZTERM in layout option.
kindly let me know if there is any way..
Thanks & Regards,
Hari priyaHi krishna ,
Thanks for your prompt reply..
I know we can use dynamic selection for payment term as input seelction...
but in i want to display payment terms for list of purchase order in output.
Is there any way to add zterm- payment term field in output layout of reports.
Thanks &Regards,
Hari priya -
Reports to see cost in statistical WBS elements
Hi,
Is there any standard SAP report available to see cost in statistical WBS element?
AmanClosing the thread. Got answer.
-
Report to see the Blocked Sales orders
Hi friends,
Is there any standard report to view the Blocked Sales orders in SAP.
Please help me out.
Thanks in Advance,
Regards,
Anvita.Hi Anvitha,
You can try one of the following transactions:
VE31 Blocked SD Documents
VKM1 Blocked SD Documents
V.14 Sales Orders Blocked for Delivery
V23 Sales Documents Blocked for Billing
VA14L Sales Documents Blocked for Delivery
Cheers,
Bhanu -
Cost Analysis Report - For a range of process orders
Dear all,
Is there a standard report available to get the cost analysis for a range of process order? COR3 --> Go to --> Cost --> Analysis. Here I can see the cost analysis for one report. But I wanted to get the cost analysis report for a range of process orders. Please help.
Thanks
NagarajanDear
You can use cost analysis report like
1.S_ALR_87099932 - Variances Between Costing Runs
2.S_ALR_87099931 - Price vs Cost Estimate
3.S_ALR_87099932 - Variances Between Costing Runs
5.KOC4
Regards
JH -
Production order report - to see if it was settled and UD on it
Help!!!
I need as report for Production orders that will show the User Decision on the order and if it was settled or not.
I dont think there is a standard report for that. Am i wrong?
As of now, i can see the report COOIS that is showing the order info and QA33 that is showing the status of UD.
Can i combine these two reports and also add the field "Cost" from the order master data to track if the cost is =0 then it was setteled?
If yes, how to combine these reports? Is there a common field? Material is a common field, but sometimes there are multiple orders for the same material, so it will not work.
any ideas?
Thanks! Points will be assigned!Hello, if the inspection lot was created for in process (03) or production (04) , then the insp lot should have the production order as a common field.
Hope this helps.
Dario -
Report to see WIP calculation details for sales order
Hi,
I want to know which is the best report to see the details of WIP calculation for a sales order. There is a WIP posting of 1 million to a sales order and i want to understand how this amount was computed.Hi,
Yes when i went there and call up the line items report i got the following error :-
Display of debits for object type SDI is not included
Message no. KD232
Diagnosis
You want to display a report for the current sender. This function is currently only possible for the following object types:
Cost Object
Orders
WBS Elements -
How to see cost componentwise production order actual cost-not planned cost
Hi,
Can anybody tell me how to see cost componentwise production order actual cost ?
Thanks,
BijayHi,
CO03->Goto-> costs-> Anlysis
or use the std. report KKBC_ORD
std. reoprt MCRI
KVBI - Actual Costs
Regards,
R.Brahmankar -
SAP report to see orders who have been TECO'ed
Hi All,
I am looking for a sap report to see all the orders that have been TECO'ed by date & plant. I know i can use COOIS & CO26 but i need something that will give me more options to exclude report output by more status types. Using these reports i can only select upto 2 statuses(for instance include status 'TECO' & exclude status 'OPEN'). Any help would be greatly appreciated & duly rewarded.THis can be easily done in COOIS screen in the header level status option just maintain TECO and in the next TAB right to it write OPEN and mark exclude.
Hope this will help
Regards
AM -
SAP report to see orders TECO with Details
Hi All,
I am looking for a sap report to see all the orders that have been
TECO'ed by Date (Selection screen - Peroid From - To) & plant.
I know i can use COOIS & CO26 but i need more details output report
somthing like who done the TECO, Date and Time
Any help would be greatly appreciated & duly rewarded
Regards,
SankaranDear,
Table there is object OBJNR field which you pass to JEST the satatus (I0045 -Tech). For knowing the status details use table TJ02.
Or try with Fm READ_STATUS.
Tables JEST contains the status and TJ02T contains the description of status
Pass Prod order no to AUFK table and
Pass the AUFK-OBJNR field to JEST-OBJNR field and take the STAT field which gives status
for description pass this STAT field and get the description
or Or See function module PM_ORDER_DATA_READ
The status maintenace is done by SAPLBSVA
Hope it will help you.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Nov 19, 2008 12:17 PM -
Any report or Table to see the list of orders with errors in SAP CRM?
Hello All,
Can anyone help me in getting a table or report to find the list of orders with errors in SAP CRM?.
Let me know if you need any additional information.Thanks in advance.
Cheers
Sreedhar
Edited by: sreedharhazari2 on May 26, 2010 11:59 AMHello Chait,
I got the solution by this report CRM_ORDER_CHECK_STATUS.
Anyhow thanks very much for your inputs.
Cheers
Sreedhar
Edited by: sreedharhazari2 on May 30, 2010 8:48 AM -
Line item report on secondary cost element (cat - 21)
Hi Gurus,
Secondary cost element with category 21 is used for internat settlement from order to wbs or wbs to cost center. But can we see line item report on this cost element. Or we cannot see any line item report on this cost element. it is just used for internal settlement purpose.
Please clear this doubt. thank youHi Mohit,
I hope you can have line item report @ order and WBS element stright away...
for orders use: KOB1 transaction code for actual line items, where you have the facility of entering CE or CE group to find the vaues related to particular cost elements in the order. If you are flexible with CEs related to 21, give there otherwise create a CE group specific to 21 category and enter the group and find the results you want.
same way for WBS elements/projects: we have transaction code CJI3 for actual line items, here also we can enter CE or CE groups
Not only for actual line items, we have the option of viewing plan line items, budget line items, and commitment line items @ both order and WBS level with different transaction codes other than mentioned above, like KOB2, KOB3, CJI4, CJI2 etc
I hope it helps a lot if I understand your query right
Regards..
Jose -
How can i see the Asset purchase order & GR after settlement
Hello Gurus,
Would you please tell me how can i check the Asset Purchase order, which is settled (WBS Element)? How can i see the GR document for the specific asset? & if i treat as a expeneses toward the project where i get the GR/ PO in asset explorer?
Warm Regards,
Dhananjay Rahane.Dear,
Dhanajay.
Purchase order related to asset you can see in Asset Master itself. Go to AS03 - Environment ( Menu bar ) - Click on Purchase Order. Here you will have all the relevant PO's relating to asset.
GR you can see in PO at a Purchase Order history. The data relating to asset you can see in left hand side navigation in AW01N Asset Explorer. Like as Vendor, PO's, etc.
WBS in PO you can see in Account Assignment Tab if your PO is created with N. ( Network PO ). WBS linked to Network you can see in CJ20N ( Project Builder ).
WBS Actual values can see in report CJI3 Actual Cost & Revenues.
I hope this helps you to solve your issue. If you have any doubts feel free to share.
Regards,
Pankaj A Bhalerao. -
Difference between Cost Ctr under Location tab in order and where we settle
Hi friends ,
In our PM orders under Location tab under the Acct. Assignmnet Category the Cost Ctr comes from object reference .
Also we use to settle orders to cost ctr.
As far as I know the cost Ctr under Location tab specifies the Cost Ctr to which order reference object belongs .
and the cost ctr under settlement specifies the cost ctr at which cost is to be settled .
effects :
If the order cost is 200Rs then if we see the reports FL wise then this Rs200 will be displayed
and if we see the cost ctr wise then it will consider the cost ctr from the settlement rule not from location .This will come after the final setllement by CO team.
Please correct me If I am wrong and also add something to it.
Regards
AMhi
In general the cost center specified in the technical object will get copied under the location tab and settlement receiver ( if receiver category is CTR)
if you want to change settlement cost center you can manually change
regards
thyagarajan -
Report for comparing Variances of production order types
Hi All,
I want a report in which i can see variances of production order type wise and can compare that with other types also.
means my input should be as follows
1) Company Code/controlling area
2) Plant
3) Order type 1
4) Order type 2 and so on.......
like wise I want to develop a report.
I have created summerization hierarchy but it show order type wise data.
i want data from multiple order type in a single report.Hi Sachin,
I have attached screenshot for your reference. Please find it.
Maybe you are looking for
-
I installed 5.7, ran ok for a while. Then it gave the error message that the preview cache was bad. A few times I have gotten this message and it restarts and repairs it. But now it couldn't. Renamed the Lightroom 5 catalog with the name "Lightroom 5
-
How do I get my photos and books after installing new Windows?
I installed a new Windows 7 on an SSD to speed up the desktop computer. The new iTunes, of course, was empty. Now I want to sync my iPad with the new iTunes but I'm afraid that I will loose all my books (freely available ones that I downloaded and im
-
ERROR 17 ipad mini update IOS 8
I was updating my ipad mini with retina display to the IOS8 . half way trough, the process stoped and there is a black screen with the itunes logo and a cable showing up in The ipad screen . also, there is an "error 17" coming up on my mac. i cann
-
My PC Shuts down without warning
I'm using my pc for school, it's prety new, and a bout early March, it started shuting down on me, then starting back up. It was once a few days at first and then it became once every day. It quickly progressed to where I can't do anything on it wi
-
Assign authorization to Z-transactions
i created a Z - tcode similar to SM30(transaction with parameter option) i want to assign authorization for Z transaction with parameter option.