Report with survey contents

Hi Folks
In our CRM 3.1 system, our customizer has customized a Survey when creating af Activity.
And it works fine. Now she need a ABAP report, which among other values, is going to write out the values registered in the Survey. Which standard report can we use?
Or if I have to develop our own ABAP report, I can see there are som tables CRMSVY and Function Modules CRMSVY But which one do I have to use.
I have found the GUID via FM: CRM_SURVEY_GET_LINK. BUt how do I get the saved values?
Best regards
Carsten

Hi Carsten,
FM : CRM_SVY_VALUES_READ and the required guids are stored in the table CRMD_SURVEY
I am sure this works in CRM 4.0 and CRM 5.0, but I am not sure for CRM 3.1, But you can give a try
Do not forget to reward useful answers
Regards,
Paul Kondaveeti

Similar Messages

How to create a report with survey data

Hi All,
I need to create a report with survey data in below format. Can anyone help me how to display the summary in this format.
Swapna

Hi Swapna,
According to your description, you want to create a report with survey data and display the summary.
Reporting Services is used for rendering the report with data retrieved from datasource. In Reporting Services, we can retrieve data from the datasource then design a report, after the report processed, data is fixed on the report. So it’s not supported
to have the end users selection and do summary. For your requirement, it’s can’t be achieved currently.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Several AR reports with BI contents

Hi all:
Recently I am designing several reports with BI contents. Since I am not so familiar with BI contents, I can only find the majarity of my reports, while for below reports, I can not find the corresponding content for them. Can any body give me some guide like which contents are suitable for those reports? Many thanks~
Report Name:
- DSO Planning
- Bad Debt Reserve
- Credit Review Reporting
- Expiring Securities Report
- Credit Reference Reporting (Web site)
Thanks and Best Regards!
Steven

already resolved, close this thread.

Error while integrating OBIEE report with EBS using Rich Content Container

I am trying to integrate OBIEE report with EBS using Rich Content Container OAF functionality. I have followed the steps mentioned in oracle Note - Embedding Analytics in Oracle E-Business Suite [ID 974422.1]. When i run my page, the container region comes up with the error message - The requested URL /pls/ghrfpkd2/OracleSSWA.Execute was not found on this server. Can someone please help me with some documents on the steps to integrate OBIEE with EBS using Rich Content Container.

I'm getting the same error on WebSphere 6.1.5. Is there any solution for this?

Exporting Crystal Reports with embedded Xcelsius content to PDF

Hi,
I have a crystal report with an embedded xcelsius chart. I would like to schedule this report using Crystal Server 2008, sending it monthly as a PDF file attached to an email. But after exporting the report through Crystal Server, the xceslsius content is just blank. Shouldn't this be working?

What is the version of Adobe Reader? Adobe Reader 9 should be there.Also check whether you have Flash Palyer/ flash Active X control installed.
If you can view the dashboard after exporting it to PPT,it means you have Flash Player installed. You need to try with Adobe Reader 9.

The report displays more than 3000 pages with same content.

Respected Sir
I have a report with form letter layout.
The report contains only one page,but while running the paper layout ,the report displays more than 3000 pages with same content.
please anyone give a solution to this problem

I think there is no bad joining. b'se when the querry is executed in sql, it is working properly(means returns only one record) . This problem is not for a particular report. Any report using the "form layout", the same problem occurs.
Why this problem occurs. How can we solve it.
Bye

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
<Personal Information Edited by Host>

لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

How to create a report with dynamic columns

Hi all,
I am using Apex 4.0 with Oracle 10g
I am creating a report and I need to display columns dynamically based on the item values.
example:
I have a table employee with columns name, designation, sal
In the report page i have a select list with designations and when I select a designation from the select list,
I need to display the names of the employees horizontally,
like each name as a new column in the report with that particular designation. and same has to continue when I select different designations.
Can some one help me how we can do that.
I appreciate your answer
Thanks,
Rik

Essentially you want to write a pl/sql function which returns a varchar2 string. The contents of the string must be a valid sql statement.
Once you have done this, you need to add a report region as type sql report and you will have the option of writing it as a query or as a function returning query. Choose function returning query and enter in the function call.
Note your function must be valid, and must be executable by your apex parsing schema.
example:
create or replace
function test_report( p1_tablename in varchar2)
return varchar2
is
v_query varchar2(4000);
begin
v_query :=
'SELECT * from '||p_tablename;
return v_query;
end test_report;Edited by: Keith Jamieson on Aug 15, 2011 4:50 PM

REPORT WITH CHANGING ITEM ON THE SAME COLUMN

Hi to all,
i'm trying to build a report with different item in the same column.
Is that possible in any way using other Oracle technique?
i'm not doing anything specific here, only i would like to know if the following possibility exist or not and how can i let apex render the htmldb_item fields 'dynamically'.
Using this CODE inside a PL/SQL function body returning sql query I obtain the following report content. Such the code of htmldb_item.fields is written, as a field value the HTML_ITEM is not rendered, so only the description of them appear in the report.
Does somebody know some tricks to make it work?
Thanx a lot
1     2     LAST_CALL     htmldb_item.date_popup (4, ROWNUM, FLD_VALUE,'dd/mon/yyyy') VALUE
21     1     AGE     htmldb_item.text(4,FLD_VALUE,10,10) VALUE
create or replace FUNCTION FNC_GEN_GUI_ITEM(ITEM_TYPE NUMBER) RETURN VARCHAR2 AS
STRHTMLDITEM VARCHAR2(4000);
BEGIN
CASE ITEM_TYPE
WHEN 1 THEN STRHTMLDITEM:=' htmldb_item.text(4,FLD_VALUE,10,10) VALUE ';
WHEN 2 THEN STRHTMLDITEM:=' htmldb_item.date_popup (4, ROWNUM, FLD_VALUE,''dd/mon/yyyy'') VALUE ';
END CASE;
RETURN STRHTMLDITEM;
END FNC_GEN_GUI_ITEM;
MY TABLE AS FOLLOWS:
CREATE TABLE "NEWPROJ"."DINFIELDGUI"
(     "ID" NUMBER NOT NULL ENABLE,
     "FLD_TYPE" NUMBER,
     "FLD_NAME" VARCHAR2(4000 BYTE),
     "FLD_VALUE" VARCHAR2(4000 BYTE),
     CONSTRAINT "DINFIELDGUI_PK" PRIMARY KEY ("ID"));
Message was edited by:
Marcello Nocito

Hi to all,
i've solved, is very simple using decode inside the select:
SELECT
ID,
FK_HTMLDB_ITEM, DECODE(FK_HTMLDB_ITEM,1,HTMLDB_ITEM.DATE_POPUP(3,rownum,VAL,'dd-mon-yyyy'),2,HTMLDB_ITEM.TEXT(3,VAL)) VALORE
FROM TESTID
my table is:
CREATE TABLE "DEV"."TESTID"
(     "ID" NUMBER NOT NULL ENABLE,
     "FK_HTMLDB_ITEM" NUMBER,
     "VAL" VARCHAR2(4000 BYTE))
Bye Bye

Report with non aggregated and aggregated columns from different facts.

Hi,
We have got requirement as follows,
1) We have two dimension tables, and two fact(Fact1 and Fact2) table in physical.
2) In BMM we have made hierarchies for both dimensions, and are joins both logical fact table.
3)In fact1, we are having three measures of which we have made two as aggregation sum, and one is non aggregated(It contains character).
4)Fact2 have two measures, both are aggregation as sum.
5)Now here the problem arises, we want to make a report with some columns from dim and non aggrgated column from fact1 and and aggregated column fact2
How to resolve the above issue.
Regards,
Ankit

As suggested you really want to move your none-aggregated fact attributes to a logical dimension (using the same physical table as the logical fact). Map this in the BMM layer as a snowflake, Place a hierarchy on this dimension with (at minimum) Total -> Detail levels, then on the other fact table you want to include in the report, set the content level on your other fact measures to the 'Total' level for your new logical Dim and it will allow them to be present in the same report.

Bursting a report with multiple queries

Hi,
I need to set-up bursting in BIP for a report with multiple queries. The output format is pdf and delivery is through e-mail. Since the queries need to be linked, I'm trying to do this using data template. I've set-up split and burst based on a field (store_id) from the first query which is used as a bind variable in the subsequent queries. So I'd ideally want the report to be split based on store_id. The report works fine if I use a parameter for store_id and view the output by store_id. When I try to schedule the report for bursting, it generates and e-mails the reports but only the last report appears to have correct data output while the others have only the output from the first query (and all other queries appear to return nothing in the report).
Any suggestions on what could be the issue here? Thanks!
Here is the data template for the report:
<dataTemplate name="Report" description="Report" dataSourceRef="ReportDB">
<dataQuery>
<sqlStatement name="STORE_VENDOR">
<![CDATA[SELECT STORE.STORE_ID Q1_STORE_ID, VENDOR.VENDOR_ID Q1_VENDOR_ID, VENDOR.VENDOR_DESC Q1_VENDOR_DESC, PERSON.NAME Q1_NAME
               FROM STORE, SERVICE_TICKET, VENDOR, ROLE, ROLE_TYPE, PERSON, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET.SOURCE_ID = VENDOR.SOURCE_ID AND SERVICE_TICKET.VENDOR_ID = VENDOR.VENDOR_ID)
               AND (STORE.SOURCE_ID = ROLE.SOURCE_ID AND STORE.STORE_ID = ROLE.STORE_ID)
               AND (ROLE.SOURCE_ID = ROLE_TYPE.SOURCE_ID AND ROLE.ROLE_TYPE_ID = ROLE_TYPE.TYPE_ID AND ROLE_TYPE.TYPE_DESC = 'PIC')
               AND (ROLE.SOURCE_ID = PERSON.SOURCE_ID AND ROLE.PERSON_ID = PERSON.PERSON_ID)
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               GROUP BY STORE.STORE_ID, VENDOR.VENDOR_ID, VENDOR.VENDOR_DESC, PERSON.NAME
               ORDER BY STORE.STORE_ID]]>
</sqlStatement>
<sqlStatement name="WO">
<![CDATA[SELECT STORE.STORE_ID Q3_STORE_ID, 'Nightly Cleaning' Q3_NIGHTLY_CLEANING, 'Nightly Cleaning' Q3_DESCRIPTION, SERVICE_TICKET.TICKET_ID Q3_TICKET_ID, TO_CHAR(SERVICE_TICKET.END_DATE, 'MM/DD/YYYY') Q3_END_DATE, 'Excellent' Q3_QUALITY_RATING_1, 'Satisfactory' Q3_QUALITY_RATING_2, 'Unsatisfactory' Q3_QUALITY_RATING_3
               FROM SERVICE_TICKET, STORE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4']]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_1">
<![CDATA[SELECT STORE.STORE_ID Q4_STORE_ID, ZONE.ZONE_DESC Q4_ZONE_DESC, SERVICE_TICKET_LINE.SERVICE_COST Q4_SERVICE_COST, SERVICE_TICKET_LINE.TICKET_ID Q4_TICKET_ID, TO_CHAR(SERVICE_TICKET_LINE.WO_END_DATE, 'MM/DD/YYYY') Q4_WO_END_DATE, 'Excellent' Q4_QUALITY_RATING_1, 'Satisfactory' Q4_QUALITY_RATING_2, 'Unsatisfactory' Q4_QUALITY_RATING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'ABC'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TICKET_LINE.SOURCE_ID, SERVICE_TICKET_LINE.TICKET_ID, SERVICE_TICKET_LINE.LINE_ID]]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_2">
<![CDATA[SELECT STORE.STORE_ID Q5_STORE_ID, ZONE.ZONE_DESC Q5_ZONE_DESC, SERVICE_TICKET_LINE.SERVICE_COST Q5_SERVICE_COST, SERVICE_TICKET_LINE.TICKET_ID Q5_TICKET_ID, TO_CHAR(SERVICE_TICKET_LINE.WO_END_DATE, 'MM/DD/YYYY') Q5_WO_END_DATE, 'Excellent' Q5_QUALITY_RATING_1, 'Satisfactory' Q5_QUALITY_RATING_2, 'Unsatisfactory' Q5_QUALITY_RATING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'XYZ'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TICKET_LINE.SOURCE_ID, SERVICE_TICKET_LINE.TICKET_ID, SERVICE_TICKET_LINE.LINE_ID]]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_3">
<![CDATA[SELECT STORE.STORE_ID Q6_STORE_ID, ZONE.ZONE_DESC Q6_ZONE_DESC, 'Excellent' Q6_QUALITY_RATING_1, 'Satisfactory' Q6_QUALITY_RATING_2, 'Unsatisfactory' Q6_QUALITY_RATING_3, 'One' Q6_QTY_MISSING_1, 'Two' Q6_QTY_MISSING_2, '3 or More' Q6_QTY_MISSING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'PQR'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TYPE.TYPE_ID]]>
</sqlStatement>
</dataQuery>
<dataStructure>
     <group name="G_STORE_VENDOR" source="STORE_VENDOR">
          <element name="Q1_STORE_ID" value="Q1_STORE_ID"/>
          <element name="Q1_VENDOR_ID" value="Q1_VENDOR_ID"/>
          <element name="Q1_VENDOR_DESC" value="Q1_VENDOR_DESC"/>
          <element name="Q1_NAME" value="Q1_NAME"/>
     </group>
     <group name="G_WO" source="WO">
          <element name="Q3_NIGHTLY_CLEANING" value="Q3_NIGHTLY_CLEANING"/>
          <element name="Q3_DESCRIPTION" value="Q3_DESCRIPTION"/>
          <element name="Q3_TICKET_ID" value="Q3_TICKET_ID"/>
          <element name="Q3_END_DATE" value="Q3_END_DATE"/>
          <element name="Q3_QUALITY_RATING_1" value="Q3_QUALITY_RATING_1"/>
          <element name="Q3_QUALITY_RATING_2" value="Q3_QUALITY_RATING_2"/>
          <element name="Q3_QUALITY_RATING_3" value="Q3_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_1" source="SERVC_TYPE_1">
          <element name="Q4_ZONE_DESC" value="Q4_ZONE_DESC"/>
          <element name="Q4_SERVICE_COST" value="Q4_SERVICE_COST"/>
          <element name="Q4_TICKET_ID" value="Q4_TICKET_ID"/>
          <element name="Q4_WO_END_DATE" value="Q4_WO_END_DATE"/>
          <element name="Q4_QUALITY_RATING_1" value="Q4_QUALITY_RATING_1"/>
          <element name="Q4_QUALITY_RATING_2" value="Q4_QUALITY_RATING_2"/>
          <element name="Q4_QUALITY_RATING_3" value="Q4_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_2" source="SERVC_TYPE_2">
          <element name="Q5_ZONE_DESC" value="Q5_ZONE_DESC"/>
          <element name="Q5_SERVICE_COST" value="Q5_SERVICE_COST"/>
          <element name="Q5_TICKET_ID" value="Q5_TICKET_ID"/>
          <element name="Q5_WO_END_DATE" value="Q5_WO_END_DATE"/>
          <element name="Q5_QUALITY_RATING_1" value="Q5_QUALITY_RATING_1"/>
          <element name="Q5_QUALITY_RATING_2" value="Q5_QUALITY_RATING_2"/>
          <element name="Q5_QUALITY_RATING_3" value="Q5_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_3" source="SERVC_TYPE_3">
          <element name="Q6_ZONE_DESC" value="Q6_ZONE_DESC"/>
          <element name="Q6_QUALITY_RATING_1" value="Q6_QUALITY_RATING_1"/>
          <element name="Q6_QUALITY_RATING_2" value="Q6_QUALITY_RATING_2"/>
          <element name="Q6_QUALITY_RATING_3" value="Q6_QUALITY_RATING_3"/>
          <element name="Q6_QTY_MISSING_1" value="Q6_QTY_MISSING_1"/>
          <element name="Q6_QTY_MISSING_2" value="Q6_QTY_MISSING_2"/>
          <element name="Q6_QTY_MISSING_3" value="Q6_QTY_MISSING_3"/>
     </group>
</dataStructure>
</dataTemplate>

Hello user6428199,
When you use ":Q1_STORE_ID" in your queries, BI Publisher looks for a report parameter named Q1_STORE_ID. Change all your report queries to get data for all the store_id's available. As you are bursting the report using the store_id as the bursting key, BI Publisher will split the report based on the stored_id and delivers content based on it. No matter how many queries you may have, BI Publisher will loop through all the store_id's available and all the queries will return data for that particular id in a report.
Thanks,
Machaan

Interactive report with detail sub-report on the same page

Hi all,
I'm fairly new to APEX, sorry if my question is too obvious. I'm using Apex 4.0.2 on top of Oracle 11.2.
I have an interactive report listing the content of a table. Since there are many columns in that table I would the report to show only a few identifying columns and the complete record currently selected being displayed using another report in a separate region on the same page.
The "Link Column" on the interactive report does almost that except that it jumps on another page; I would like to simply have a sub-report updated with the selected data instead of a new page displayed. Does anyone know how to do that?
Thanks for your help,
Chris

Chris,
this sounds like what I normally do in my referential data.
I use the wizard to create "form with report"
I make sure that both regions (the form and the report) will be set on the same page number
then I check/change the order of the regions (report first, form second)
then I set the form to display in column 2
regards,
Richard
P.S. the report only shows enough columns to recognize the records. the form shows all records

PS2013 / SQL 2012 - A SQL Reporting Services Report with more than one filter connection looses connection in a site template

Hi,
I created in a sub site not linked to a project to become a site template. I inserted two SQL Reporting Services reports web part that require the same two dates for an interval and the name of the project in a page of the site and connected
to three filters, two for date and one for text and I got the page below (only one of the reports shown).
Look that all parameters needed by the report are linked to the filters above the report.
Then I save the site as template with all contentes and assign it to the EPTs and create a new project or replace the site of existing project site. What I got is:
Look that the filter connection of the dates are lost (in both reports) and the order of the filters changed.
I deleted and retried to connect the filters in diferent order and language, but I did not get any success.
The BI Central Data Connectivity resource is activated in the template site and in the site collection.
Is there any solution for this?
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Hi,
Correction: this happens only with "Date Filter" web part!
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Footer for a report with 2 repeating frames with down/across print directio

I have a report with a frame for title shown in first page. the content of the report is shown on two columns in a repeating frame(R2) which enclose an other repeating frame (R1). In R2, just after R1, I have a frame for totals. Both repeating frame have down/across print direction. All repeating frames and title frame are enclosed by a regular frame(let say frame A) that have vertical elasticity fixed. at the end of the report i must display an other frame(frame B) with signatures. I put frame B in frame A, just after R2. If I set vertical elasticity to fixed or contract for R2, when the title frame is missing i get an empty space in the bottom of the page(except the first page, where the title appear)(R2 is anchored to title frame). if I set vertical elasticity to variable for R2, the frame B is not shown on last page with records, but in next page. I need a solution to keep the frame B in last page of the report which have records. the problem appear only when I have records in second column.
Can somebody help me, please?

Hi,
I think without using Across/Down instead of Down/Across this is not possible. But then the output is
1 2 3 4
5 6 7 8
If you need to have
1 3 5 7
2 4 6 8
then you had to add some logic in an additional column for sorting the output. (sounds easy, but the logic need some work depending the count of records and their position.
Regards
Rainer

Does BOXI support crystal reports with parameter references in formulas?

I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.

Hi,
In Crystal Reports under File -> Report Options >check convert Null Values to default > Verify on first refresh > Verify stored procedures on first refresh.
This corrected the issue by allowing the query engine time to locate those columns and map them to the query being sent by the report.
The convert null values was added because those field were being used in the record selection and grouping.
Regards,
Vinay

Report with survey contents

Similar Messages

Maybe you are looking for