Reported Bug input requested

Hey everybody, I've created a Bug report in the issue tracker about using the provided neoprene case to store the PlayBook and walking with it cradled in your hand top facing down...
the device held in this manner is very sensitive to the key sequence which activates taking a screenshot...and you end up with a dozen or more screenshots of the lockscreen after only a short walk holding the device this way.
ideally the device should NOT take a screenshot when it is locked, however it does.
if you have experienced anything similar to this or just find it as important as i do then please see the issue and vote it up please to have it fixed/resolved at the following link: https://www.blackberry.com/jira/browse/TABLET-193
CEO/Lead Developer - Tensioncore™ Design Studios
http://tncr.ws/ - ShortenThis!™ for Blackberry Playbook | ShortenThis!™ for BlackBerry® 10
The Periodical Toe A highly informative Table of Elements
DrawThis! A fun drawing app for the BlackBerry® PlayBook™!
http://www.tensioncore.com/ - Tensioncore™ Web Hosting

Correction:
"This is the big that I have reported to Apple:" -->> "This is the bug that I have reported to Apple:"

Similar Messages

FAQ: How do I submit a bug report or feature request or otherwise give feedback about Premiere Pro?

The best way to submit a bug report or feature request is to use the bug-report/feature-request form.
The Premiere Pro team doesn’t necessarily see and record every post on every forum and social network, but we do see, record, and track every entry through the the official feature-request/bug-report form.
It also helps a lot if you opt into the Product Improvement Program.
Also, be sure to use the crash reporter.
We really do read all of the bug reports and feature requests, and the software really does get a lot of benefit from detailed crash reports.
Don’t forget about contacting Adobe Technical Support or Customer Service, too. For information on how to contact Adobe Technical Support, see this page. (Note that you must register your product before you can open a technical support case for it.)
If you have tried to get help from our support staff, but the service was inadequate, I can help you to escalate your issue if you send me your case number at kopriva at adobe dot com. You must provide me a case number. I am not offering to solve your problem myself; rather, I am willing to forward your information to someone if you have already hit a dead end with our Technical Support or Customer Service.
If you have feedback about the content of the Premiere Pro Help document, then please add a comment at the bottom of the relevant page. You can add comments to add information, to add links, to make corrections, or to ask for clarification.
If you want to keep up with the Premiere Pro team, then you can follow our blogs, Facebook page, and Twitter feed and so on.
Oh, and I can’t resist this opportunity to remind you to update to the most recent version of the application. Don’t be surprised when the first thing that you hear back from us is that you need to install the latest updates. We fix a lot of things in updates, and we don’t want to go chasing bugs that we’ve already fixed. We’ll keep you posted on our blogs, Facebook page, and Twitter feed about updates as they become available.

Hi qwerty,
Dun tink that creative customer support sucks cos I had been dealing with them in the past and I can say that their service are quite gd and fast. If you wanted a refund, I tink you need to contact the store that sells you the product. Dun tink creative will refund you though.

Bug report / Feature enhancement request.

I'm actually quite surprised that this nees to be reported as a problem.
Why is it that the "World Clock" widget used in the dashboard doesn't have, built in, the time zone "GMT"?
Yes, I can add it myself using the instructions on the net but it just seems so wierd that it's not in there to begin with.
So, please, take this as a bug report/feature enhancement request to correct this oversight.
Thank you.

this is a user to user forum only. if you want to make a feature request do it Here:
http://www.apple.com/feedback/macosx.html

BUG: Inputting decimal places into new duration preferences (Premiere Pro 2014.2)

So, I checked the release notes for the newest version of Premiere Pro CC (2014.2). I was happy to see the ability to switch between frames and seconds when choosing the default durations of transitions and still images.
Immediately found a bug. Decimal places don't work correctly after switching units.
Open Preferences.
Switch Video Transition Default Duration units from the default Frames to Seconds. Try to insert a decimal place using the keyboard. It doesn't work.
Hit OK to close the Preferences, with Video Transition Default Duration now set to seconds
Open preferences again and change the units back to frames. Now try to input decimal places. No matter where the text cursor is, the decimals just get added to the end of the form field.
This seems to affect all three form fields (not just Video Transition, but Audio and Still Frame as well).
Really weird bug, and I'm not sure how you guys at Adobe missed this one...
Anyone else having this bug? I'm on Windows 7.
If so, can someone please file an official bug report? I'm at work and low on time, but I felt like I needed to bring this up to make sure I'm not the only one in this boat.

I've reproed this issue and logged a bug report.
A workaround is to toggle the Unit setting, click Okay to close Preferences, then reopen Preferences and adjust the Value. Sorry for the inconvenience.
I urge you to submit your own bug report (Adobe - Feature Request/Bug Report Form). The more customers who report an issue, the higher the odds that a fix will make it into the next release...

Reporting bugs in oracle products

Is there a webpage whre I can report bugs in oracle
products.
Thanks,
Artur...

The only place I'm aware of short of calling Oracle is metalink.oracle.com but you have to have paid for Oracle support to access
the web site. From there you can file a TAR(Technical Assistance Request) and a support person will research your problem and
either find an existing fix or classify it as a new bug.

VISA - unable to queue operation & device reported an input protocol error.

To summarise I have two main questions:
How can I clear the VISA operation queue and what causes an input protocol error during transfer?
I am using a Tektronix AFG3022B Function Generator with latest firmware connected via USB and LabVIEW 2013 SP1 patch 2 (13.0.1f2) 32bit with NI-VISA 5.4.1.
If I have a small timeout, say 100ms, and perform a save operation and op complete query on the device (*SAV 1;OPC?), then do up to 10 VISA reads; the first few reads time out (as expected), but then I frequently get the following error:
-1073807305 (0xBFFF0037) VI_ERROR_INP_PROT_VIOL. "Device reported an input protocol error during transfer."
Once this occurs, the whole VISA session seems to become unstable and lots of the read operations fail returing this error code and not the timeout error (0xBFFF0015 (VI_ERROR_TMO)).
This only seems to happen when I do save/recall operations (either internal or to a mass storage device connected to the instrument), all other commands/queries timeout for the first few reads (as expected) then return the value. Do you think this is probably down to poor instrument firmware/hardware? Or am I using the VISA incorrectly? I would have thought that attempting to read VISA data to soon should only generate a timeout error and not a protocol error.
Reason for small timeouts:
Instead of setting the timeout to 4 seconds and having no way of cancelling the read operation I set the timeout to 100ms and run a for loop up to 40 times ignoring timout errors unless it's the last loop iteration. This means I can the operation within ~100ms.
What causes the VISA protocol error? I can't find much information on it.
Once the protocol error occurs and I keep repeating the *SAV command, I get the following error:
-1073807303 (0xBFFF0039) VI_ERROR_IN_PROGRESS. "Unable to queue the asynchronous operation because there is already an operation in progress."
Once this error occurs, how can I force a clear on the VISA queue without unplugging/power cycling the instrument?
Some NI I/O trace captures attached to show what happens and test VI.
Using LV2014 SP1
Attachments:
VISA problems.zip ‏38 KB

I thought I would try to duplicate your problems, but I only have a Tektronix TDS Scope that has USB.
I am a big fan of using *OCP? to sync instruments control and your problem is of interest to me
This very simple write/read returns the *OPC '1' return char consistently between 175-185 ms. No problem
Trying your short timeout with a loop, I do not get what I or you expected.
If I run this with an adequate timeout (something well longer than the needed 185 ms) it returns in between 175-185 ms with one time through the for loop. As expected. No problem.
BUT! If I try setting the timeout to something below the needed 175 ms like your 100ms...
Sometimes it works but it takes over 2000 ms to return but only goes though the for loop twice.
But sometime it does not work at all, taking well over 10 sec to exit out of the for loop with a timeout error.
I never see the queue error that you are seeing
How long does it take to do a simple *SAV
I don’t think the queue error is coming from the instrument. You would have to send the instruments the SYSTEM:ERROR? Request before the instrument would report any of the instruments errors.
Be sure to set your Termination Char setting. I prefer to turn it off for the Writes so I control when to send it. But turn it on for the Reads
Also I noticed from your trace files that you use the *OPC? after a *IDN?. This is not needed as you will know the *IDN? is complete when your received the string back. In fact my Tektronix scope did not like it if I sent it "*IDN?;*OPC?\n". It would not send me anything back, not even the IDN.
Is the SAV command on your instrument so long that you need to be able to break out of the loop?
Omar

How to report bug?

Where do you report bugs to Apple? On the support page there is a link to leave feedback about iTunes. But, that page is restricted to requesting songs, artists, genres.
Thanks,
Mark

https://bugreport.apple.com/cgi-bin/WebObjects/RadarWeb.woa
Thanks. But, it says I don't have access to the application.
Mark

Report without input screen working diffrently in debugging and background

hai,frds
I have one report without input-screen,But it is working diffrently in background and debugger.
please help me for this and i am bapi inside the program to create entries.but
if its in debugging it is crates corectly but if is in back ground it not working cooetly bapi working one time only.
plese help me for this.
Moderator Message: Too much of text-speak/sms-speak. Thread Locked. Write complete words and check their spellings using the Spell-Check tool in the editor here.
Edited by: kishan P on Jan 19, 2012 4:40 PM

HI,
In SM37,Put the cursor on the Job, Type 'JDBG' in Command line and press Enter.
You can able to debug your Background job now.
Find out where it is going wrong.....
how to debug background job

How to schedule webi report in bulk (multiple report in one request)

hi,
I am little bit new to BOXI. I have little bit work experience in Crystal X on scheduling which was used in one of our enterprise java application. We are exploring options in BOXI.
Currently i am scheduling a report with following api
infoStore.schedule (webiDocs);
This will schedule one report instance.
My question is
Is there any way to schedule multiple instances of a same report in one request.
Is there any way to schedule multiple instances of a different report in one request.
If above things are possible please provide the apis for the same.
thanks in advance
Shreenidhi

Scheduling multiple Webi reports in one command:
infoStore.schedule takes 1 arhgument of type IInfoObjects which is a collection of InfoObject. IInfoObjects is retrieved by the query. So if you to retrieve all the Webi Docs you want to schedule , then with infoStore.schedule(WebiDocs), it will schedule them all in 1 shot. Scheduling Info properties for each Webi Docs should also be set. Please refer to the samples on scheduling at link below.
https://boc.sdn.sap.com/node/3211
Scheduling one Webi Doc multiple times in one command:
I donu2019t think it can be done in one command. Do you want to schedule the object multiple times each time running it with different prompts? Or do you want it to be sent to different destination in each schedule? Otherwise you can schedule it once and then access the scheduled instance multiple times.
I hope this helps.
Regards
Aasavari

Report on Leave request (with HTML ) using ITS version

we are using ITS version of ESS and MSS version EP 6.0 and SAP R/3 5.0.
Our client wants a report on Leave Request(with HTML). the worflow used is WS20000081. my question is there any standard report to check the Leave Request which are approved or rejected. In SAP there is one standard report
RPTARQDBVIEW where in when we execute no output exists.
Please help me whether is there any report to view the leave requests.
Regards
Santosh Ghanwar

Dear Claude;
Thanks for your kind assistance... I was out for sometime & got up in some other urgent tasks...
Sorry for delay...
I had created the loop Payroll? with following conditions
&Employee.ControlRecordState&     =          1     or
&Employee.ControlRecordState&     =           2     or
&Employee.ControlRecordState&   =          3     or
&Employee.ControlRecordDate&     <           %Current Date%
but result is always "True"
Please help me out...
Best Regards,

Is this Oracle Reports bug – "break order property" in "group above" report

Is this Oracle Reports bug – “break order property” in "group above" report
Could anybody confirm that in "group above" report, we could only order the brake column's values with ""none" or "ascending" or "descending" provided by "break order property"?
In the following example, “Dept” is brake column. Oracle Reports allows us to order values in “Dept” with “descending” provided by “break order property”:
Dept 30
job ename salary
xxx xxx xxx
xxx xxx xxx
Dept 20
job ename salary
xxx xxx xxx
xxx xxx xxx
Dept 10
job ename salary
xxx xxx xxx
xxx xxx xxx
or “ascending” provided by “break order property”:
Dept 10
job ename salary
xxx xxx xxx
xxx xxx xxx
Dept 20
job ename salary
xxx xxx xxx
xxx xxx xxx
Dept 30
job ename salary
xxx xxx xxx
xxx xxx xxx
I need to do:
Dept 20
job ename salary
xxx xxx xxx
xxx xxx xxx
Dept 10
job ename salary
xxx xxx xxx
xxx xxx xxx
Dept 30
job ename salary
xxx xxx xxx
xxx xxx xxx
Could I do this? Could anybody confirm that we could never ever do this, or If yes, how?
Millions of thanks for advice.
M.Z.
Edited by: jielan on Sep 18, 2010 8:23 AM

Why should that be a bug? You have a custom requirement and have to find a way to fulfill it. But, what is your actual sorting order? Do you have only this three departments? If so, you could add an addtional column in your query like
DECODE(DEPT, 20, 1, 10, 2, 30, 3, 4) SORTINGput that column in the same group as dept and sort after that new column.

Bursting with Report's input parameters

Hi experts,
I am running BIP bursting feature, and this is working fine. Now, my customer is needing to enabling bursting feature by passing report´s input parameters. It is possible to set the bursting sql query to accept report´s input parameters?. If yes, how can I get that?.
I am working with BI Publisher 10.1.3.4.1
Regards,
Edited by: Farid Leonardo on 20/09/2012 14:48

Hi
You can add parameters to the bursting query
Please see if this helps
http://docs.oracle.com/cd/E24001_01/bi.1111/e18862/T527073T555155.htm#T568844

Bug Fix Request - To Admins

Hey there Logic Pro forum Admins,
I've got a small bug fix request for you. I'm using Logic Studio to lay down VO, and I ran across a potentially distressing bug. When you are recording in the arrange window and you click on the playhead, it erases your record take. It doesn't just remove it from the arrange window and place it in the bin, it erases the take completely.
In my case, it was good that I caught it early on in a take. But imagine if I had clicked the on the playhead after a 5 - 10 minute take, or perhaps longer? We all know that time is money, particularly in VO sessions. The actor would have had to redo the take, and I would have had to pay the VO director and actor accordingly.
To be entirely clear, it wasn't as if I had purposefully clicked on the playhead while recording. I was actually trying to rename a marker and accidentally hit the playhead instead. The effect this has had on my session is that I'm now deathly afraid to do anything (including cutting previously recorded regions or renaming them) while rolling. I'm sure you can appreciate my dilemma. Yes I could simply not click on the playhead, but you know how it is in the heat of a session. Things need to happen fast, and your clicking accuracy isn't what it normally is etc.
Anyway, in future iterations of Logic Studio, it would be really really nice (not to mention heart attack preventing) if the user could disable this 'feature'. Please please please fix this!
Kind regards,
-Justin
Message was edited by: Inteleky

I'm not sure if what you're experiencing is a bug. I just tried this. While recording, I hit the playhead, and it simply stoped the recording where it was when I hit it, although the session continued to play. Try it yourself and watch the transport - the record button will go off, but the play will continue. When I did it just now, it DID NOT erase the recording that was in progress. Everything that had been recording until I hit the playhead was still there. This action makes sense to me. If the playhead gets touched and jumps to another part of the project, the action of recording SHOULD stop.
If you're really concerned about this, I'd do some experimenting. Just sit down and start recording, and see what happens if you hit the transport, or if you do other actions you're wanting to do. Again, everything that had recorded until the moment I hit the playhead, was there. If your ENTIRE RECORDING gets deleted when you hit the playback, then something's wrong with your Logic. Are you on 8.0.2?
Why are you feeling the need to edit while recording, anyway? Especially when you're recording important stuff??
On a sidenote, you're not going to reach anyone from Apple on this forum. You need to go here:
http://www.apple.com/feedback/logicpro.html
Good Luck!

URL for reporting BUGS in iWeb. URL for reporting a WISH LIST for next iWeb

1
Can someone please send the URL for the page in which one can report bugs in iWeb?
2
Same thing for simple old Wishes and Hopes for the next iWeb if they are not one and the same URL/page.
Thank you.
Lorna in Southern California

Lorna....
All is well....actually doing a little jet-setting
over here and there...you can check the updates on my
website....thanks for your email...
Regarding the feedback to Apple....if you ever forget
the website, you can always look under the iWeb menu
while you are working (that's when you run into these
bugs anyways) and pick "Send Feedback to Apple".
That'll send you to the same webpage for feedback
submission!
Hi James I'm glad that you are ok. And thank you for the hint about the bug reports on iWeb menu. It makes a lot of sense putting it there; I just never noticed it.
iWeb has a bad blog bug
I'd like to stomp it royally
Instead I'll send a feedback hug
(She said, behaving loyally.)
All is said and all is done
Let's get the Raid bomb just for fun.

The recording device reported the illegal request: Unknown device

Has anybody any idea? I am not able to output a dvd-9 (dvd + dl). there is always the message: the recording device reported the illegal request: unknown device. The layersize is ok and the dual layer brake is set.

I don't have the exact error message with me, but that sounds similar. I bought a new DVR-115 for my Mac Pro and put the existing DVR-112 in the bottom slot. The DVR-115 worked fine for a month or so, then started getting that or a similar error. I replaced it under warranty and soon got the same thing. Then I Googled the error message an found many people having the same problem, even people with PCs. Now I just burn with the DVR-112, not worth resolving. BUT, I could be remembering the error message incorrectly, so Google and see what you get.

Reported Bug input requested

Similar Messages

Maybe you are looking for