Reporting issues after SP1 to R2 upgrade

Hi Guys.
I'm having an issue with reporting after upgrading System Center 2012 Configuration Manager SP1 to R2 CU2.
For some reason SSRS is not allowing users to logon from a remote workstation. The Reporting node in the Monitoring workspace does not list any reports. The SSRS reporting portal prompts for authentication but does not accept any credentials. Both
are accessible when logged on to the Primary Site Server where SQL and SSRS are installed.
After some investigation I’ve determined that this is a permissions issue and this is where I need your combined wisdom. At first I thought this might be as simple as adding the proper RBAC permissions but if it was permissions issue for my account then
why would it be accessible from the site server but not a remote client….
Some techy info for you.
With the R2 Upgrade a few new permissions were required for the SSRS service account in order for RBAC to work with Reporting. The service account has been added to the Domain Built in group “Windows Authorization Access” and has the “Read TokenGroupsGlobalAndUniversal”
AD attribute set to “Allow”. These are the permissions Microsoft has listed for the Service Account in the TechNet Library.
The SRSRP.log has a ton of errors that I believe may be the cause of the problem. The error is “Unable to translate SID [SID for Account] error: [Some or all identity references could not be translated.] SMS_STS_REPORTING_POINT 9/9/2014
4:51:00 PM 5300 (0x14B4)” which I believe to be a logon failure error. Each time a user try's to authenticate with the site this error is generated.
So I’m thinking this may be a permissions issue with the Service Account that runs SSRS or the SQL Engine may also require a Service Account.
At this point I’m thinking the SQL Engine may also require an AD service account, but before I create another Service Account I wanted to consult the IT Geniuses and see what kind of incite you may have.
Thanks for your help,
Gabe

Hi Guys,
One of our SQL DBA's was able to resolve the issue. It turned out to be a Kerberos Authentication problem with SSRS.
Cause :
The problem was due to Kerberos authentication. Kerberos is an authentication protocol that allows clients that create authentication tokens to associate a specific destination to that token. In this case there is a mismatch between the destination
specified in the token and the report server process configuration. Due to this mismatch, the underlying Kerberos authentication scheme supported by Windows prevents report server from authenticating the user.
Resolution:
1-Remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the file rsreportserver.config and save the config file 2-Stop and start SQL server and reporting services.

Similar Messages

WiFi issue after 6.1.2 upgrade

I upgraded my OS to 6.1.2 and now I'm having troubles connecting to the internet at work. I did reset my network settings and inputted the appropriate password and still having issues. It identifies the network but when open safari or an app requiring internet connection it goes nowhere. Is anyone else having this issue. Does anyone know how to fix this problem. Keep in mind my connection works fine at home.

Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Authorization issue after the Support packs upgrade

We're having problem on authorization issue after the SP upgrade.
One issue if "You are not authorized to call up line item display" using FCH1 and FS10N tcodes.
And the SU53 showing problem on S_TCODE FAGLL03.
How are we going to solve this issue? We dont want to add this missing auth object on all our finance roles.
Thank you in advance.

How can i send you the trace file? What is your email address?
If I were you, I won't do that. Did you not ever sign some confidentiality agreement? I wonder.
Anyhoo... (copy right @ David)
What are the objects been caught in category RC=4, RC=12?
Relate them with functional aspect of the transaction (error screen)
Edited : You can paste RC=4, RC=12 objects here without customer specific value if you want to.
Regards,
Arpan Paik
Edited by: P Arpan on Aug 23, 2011 2:36 PM

Sleep issues after 10.4.7 upgrade

I upgraded to 10.4.7 immediately after it was issued and I had no issues. A couple of weeks later the FAX software Pagesender would not logout on a scheduled shutdown. I ran Diskwarrior to repair the directory and I thought ev3erything was OK but then all of a sudden my computer would not wake from sleep. By pushing numberous buttons it the screen would wake but the cursor was frozen. I checked my energy saver settings and noticed it was set to spin down the discs when possible. I unchecked this option and I thought that the problem was gone. I was away for a couple of days and I keep the computer on during the day as I receive some faxes and when I tried to acces the computer on my return I was back to square one. The only way I can get the computer to function normally is to do a hard restart. Any thoughts? This condition applys to my G4 desktop machine

Can you clarify if you've checked for any updates to your FAX software?
If you open Applications> Utilities> Console, go to the View menu, and slect show log list, does anything suggestive show up from around the time of one of the crashes? Look in system.log and console.log, in /Library/logs/Crash Reporter, and in /var/log/fax

Minor issues after KDE 4.9 upgrade.

Hello All.
After upgrading to KDE 4.9, I noticed:
1. My computer took some extra time to shutdown (only when running on AC
power). I ran a diff on a snapshot of my processes taken before starting
X, and after shutting it down, and found that kactivitymanagerd is the
problem-- it does not respond to SIGTERM, only SIGKILL. I guess it is not
a huge issue, but it annoys me nevertheless. Executing `pkill --signal 9
kactivityman` solves the issue, but I don't know where to put it... my
.xinitrc runs `exec startkde`, so I never get the chance there. Any
suggestions? Also, is anyone else having this problem? Is this worth a
bug report?
2. Some of the kwin effects seem less smooth. In particular, the "show
desktop grid" effect (most others seem fine). Did anyone else notice
this? Maybe I'm crazy, but I swear it was smoother in 4.8. If anyone can
confirm, did you find an answer? I tried to set the thumbnails to
"smooth" instead of "accurate", but it didn't seem to help. By the way,
this is on an X220 with intel graphics hardware (and the i915 kernel
module).
Has anyone successfully downgraded KDE from their cache before? I want to go
back to 4.8, but I'm scared of creating a much larger disaster.
Thanks in advance.
***Update***
Running my power-saving script fixes the first issue with kactivitymanagerd
(which is why it only happened on AC). I get the feeling this will be
something obscure, so it is probably best to not waste your time
investigating. But if you do run into this, I'm happy to share my script,
fwiw
Last edited by wes (2012-08-08 00:44:45)

Thanks for the replies, all : )
Teho wrote:I personally suffer from problem where closing almost any KDE
applications causes segfaults...
I tried out dolphin and konqueror just now, and had no issues. I don't use
them very often, but I've never seen them crash before.
@masteryod: Indeed. But before filing bug reports, I like to check with the
friendly Arch community to get a little feedback and make sure that, as you
mentioned, it isn't my own fault for having some messed up configuration.
This is a valid use of the forum, right?
PS Lead developer of kwin is suggesting porting desktop grid to
qml...
I'm not sure what to think of the QML re-write: that sounds like a
re-organization / feature addition, but I don't know if it acknowledges the
4.8 --> 4.9 performance regression that we've observed. I think will file a
report as soon as I get the chance.
Also, I have one update: I think the first problem I mentioned
(kactivitymanagerd refusing to die) might be somewhat me-specific, so don't
look too hard for a solution. The reason it only happens when I am on AC is
that in this case my power-saving script is *not* run. If I run the powersave
script, kactivitymanagerd will exit at the right time o_O No clue why the
script would fix this. There's nothing exotic in the script, and I still
contend this is a bug, but I'm not sure it would be worth your time to
investigate.
Thanks again, everyone.

Join Issues After 4i to 10g Upgrade

Hi,
We have noticed issues with folder joins after upgrading from 4i to 10g. These joins existed and worked as expected in 4i. But after the upgrade to 10g, reports will pull all data instead of limiting to the parameters.
For example, we have a order headers folder and invoice headers folder in a business area created from the database. The 2 folders have a join. If I create a report that pulls columns from both folders and then create parameters to limit the invoice creation date, it will pull all records from the database instead of limiting to the parameters.
Has anyone else experienced this issue? Can someone point me to some documentation that relates to the issue?
Any help is greatly appreciated!
Thanks,
Troy

Hi Troy,
I seem to remember that there is a difference in how 4i and 10g handle outer joins. There is also an issue associated with applying joins to different types of folders. Please send me a copy of the SQL generated from the "view SQL" function for this worksheet and I'll try to help you debug the issue. It would also be helpful if you could do this for 4i also.
--Srinu

Networking issues after a move and upgrade

I just moved, and did a massive system upgrade, moving over fully to systemd.
Everything works fine, except my network seems to crap out after a random period of time (sometimes 2 hours, sometimes 10 minutes, sometimes it stays up for days).
ive used different ports on my router, different ethernet cables, so im pretty sure the issue is with my laptop
i used the ethernet-static script and put in my own network info (using 10.0.0.0/24 network), a correct default gateway, and working nameservers.
on my main computer i have MPD going over a SMB share, and sometimes it just stops working. When i open up Wireshark i see im getting ICMP Dest unreachable errors.
What could be causing this? Any ideas?
Last edited by ptchinster (2013-03-10 19:16:56)

No. Something is wrong with modprobe I guess. I noticed yesterday that the line that usually looked lieke this
eth1 Link encap:Ethernet HWaddr 00:10:A7:27:5D:A2
was like this
eth1-00 Link encap:UNSPEC HWaddr 00-10-A7-27-5D-A2-00-00-00-00 or something like that
So I did a manual modprobe 8139too and I got
eth2 Link encap:Ethernet HWaddr 00:10:A7:27:5D:A2
I changed the settings in rc.conf from eth1 to eth2, restarted the networking script and the network was OK. But this doesn's anwer the question what was wrong with it in the first place...

PWA issues after Office 2010 SP2 upgrade

We recently upgraded some client machines that have Project 2010 Professional installed to Project SP2. Several of these users also use PWA.
After the upgrade, I heard from a few of these users that in PWA, the Workflow Approval buttons were unavailable, and that they were unable to export to Excel. I checked with another user who uses the same Project Server and did
not receive the update, and he had the same issue.
I did find kb2817580 that describes these exact issues, but the timing is suspicious with the client SP2 upgrade. Is there something in the Project 2010 SP2 update that would cause this problem on Project Server, or does Server need to be upgraded
concurrently with the client update? I was not under the impression that the local Project update would affect Project Server. Is that incorrect?

Cwoodin, in my experience, the client doesn't make any modifications at the server.
About the updates, i would recommend you to apply SP2 at the server as well. Besides that, take a look at the ULS logs to see if it spits any errors.
Regards

Issues after Tiger to SL Upgrade

About 5 months ago I upgraded from Tiger to SL... although Tiger never gave me any issues I wanted to be on the latest version. I have an older MAC so needed to upgrade via the (expensive) Box Set. I did the change via the "upgrade" and not the complete install (erase disk). Since then upgrade my MAC has given me issues... it freezes at times requiring a hard shutdown... other times the graphics do not refresh.. the desktop icons tun into horizontal lines... again requiring a hard shutdown. I ran the Apple hardware test and no errors were identified.
I can not find the common cause... there does not appear to be any common events before the problems. The only key change in the use of the MAC is my wife's use of FACEBOOK games... especially the farming ones... I've installed FireFox for her just for those games as she say's the games don;t work right in Safari (and of course not on the iPad)...
Do I need to do a complete install of SL? Any other suggestions ? Thanks in advance...

DaddyPaycheck, could you please explain why you ask what external peripherals he has attached. I'm not being snarky — I am just curious because I also had random freezing of programs after upgrading to Snow Leopard from Tiger. After a month of trying various fixes, including more than one clean install and taking my computer into a shop (they could not replicate my problem, and my computer passed their diagnostic tests with no issues), I gave up on Snow Leopard and reinstalled Tiger, which runs just fine on my computer.
Anyway, the fact that my computer seemed to run fine on Snow Leopard in the shop made me wonder if my peripherals were the culprit, since they weren't attached when the computer was in the shop. All I have hooked up to my computer is an HP Deskjet F4180 printer and a Lacie external hard drive. BUT, while they are plugged into the USB ports on my iMac, both are ALWAYS turned off unless I'm actually using them. Could simply having these external peripherals plugged into my computer — and not actually being "on" — cause the problem I was having?
I've been monitoring Apple Discussions for a couple of months now, and plenty of people are experiencing graphics-related problems and freezing using Snow Leopard, so it seems the problem goes deeper than just the peripherals. In my own case, I'm guessing my mid-2007 iMac just isn't up to running Snow Leopard despite Apple's insistence it is. I don't know what I would do if it turned out the problem actually is caused by my peripherals. After having already spent a couple of hundred dollars on Snow Leopard and iLife 11 and the computer repair shop, I don't feel like buying a new printer and/or external hard drive just so I can use Snow Leopard. Still, as I said, I'm curious to know what you know about whether peripherals could be causing our problems.
Thanks.

File Association issues after Adobe Reader XI Upgrade

After an upgrade to AdobeReader XI, pdf file association fails in outlook, and some desktops.Ftype & assoc didnt fix the issue.
I have tried several things including:
1-ftype AcroExch.Document="C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" "%1"
2-Association using default programs in control panel also didnt work......it continued to show acrobat as an unknown program
3-I went here: http://forums.adobe.com/message/4275863 and it looked like he had a similar problem as we did

Sup guys
My colleague did some research and found the answer in this thread: http://forums.adobe.com/message/4457755#4457755
Use "LEAVE_PDFOWNERSHIP=YES" in the command line when installing Adobe Reader to preserve PDF Ownership!

Bluetooth issue after 7.4.1. upgrade

After upgrading my MacBook to Lion 7.4.1, Bluetooth is behaving badly. I have been using Bluetooth to send files between my MacBook and iMac for three years, with no problems. Now, I never know whether they are going to communicate with each other. Sometimes, they both indicate that they are connected to the other, sometimes they don't, but even when showing connected, they sometimes cannot transfer a file. Each claims that the other is to blame.
Sometimes, a file will make it across the Great Divide, but the journey seems to take longer than it should.
I can see that others are having Bluetooth/Lion issues, also. Is this going to be fixed or should I revert to Snow Leopard?
I also am upset that I have to set up my Mail from scratch, but that's a subject for a different discussion area.

An update on this.
I upgraded to 7.4.2, and this has not resolved the issue.
What appears to be happening is that the sync starts, but then crashes after X number of items (varies each time). This seems to be at the point itunes switches from the 'copying item X of Y'/progress bar screen to the 'syncing ipod..' splash message (the little '>' arrow in the top display and the syncing logo next to the ipod in the left pannel both dissapear).
On occassion, if I hit 'sync' again, it picks up where it left off, but on most occasion I need to dissconnect the ipod, and reconnect it to complete the sync (sometimes 2 or three times).
This is happening with both Ipods I own. I have run the ipod diagnostics, and it does not show any errors.
7.3.2 was working fine - issue only occurs since the 7.4.X upgrades.
Anyone have any ideas on what the problem could be/how to fix?
Regards,
Dave.

Anybody have DVD Player issues after 10.7.3 upgrade?

Aloha everyone,
I upgraded both my iMac and MacBook Pro to 10.7.3 (I used the combo updater) like any dutiful Apple customer, as I've never had an issue with an upgrade (I made the switch in 2006, so I don't have that much history here). I didn't notice this at first, but I have several DVD rips whose icons now appear to be a generic file icon. Furthermore, when I double-click on them, instead of DVD Player opening both the control window and the viewer window, only the control window opens. When I press the play button on the control window, I get the system error beep. I can not play the DVD file even when I then choose File ... Open from DVD Player's menu. I can use VLC to play the DVDs, but I would rather use DVD Player (just my preference).
I was wondering if anyone else has experienced this issue since upgrading to 10.7.3. This is pretty annoying, especially considering that DVD Player is an Apple app. Oh, and I use Ripit for my DVD rips. After purchasing a DVD, I would rather just rip it and play the rip than take a chance on damaging the original DVD.
Thanks in advance for any and all responses

FCS 3 is working as usual for me, although FCP did re-profile the RT Extreme settings and took a couple of seconds longer to start up the first time after updating. What else have you installed or updated?
I was also on the 10.7.3 beta. It did not change anything in the behaviour of FCS 3 there either.

Wireless dropout issues after 10.5.3 upgrade

As recommended [here|http://discussions.apple.com/thread.jspa?threadID=1540120&tstart=0] I am starting a new topic to focus on my problem.
My sad history begins with the 10.5.3 update (about a month ago), which brought on the problems. After trying all the tricks, and needing a solid solution I clean-installed 10.5.2, which worked a charm. Out of interest I then upgraded my clean install to 10.5.3, which broke the airport again so I clean installed 10.5.2 again : (. Fast forward to the recent 10.5.4 release, which I saw some positive feedback on regarding the airport problems, so I gave it a try. Sadly it broke my wireless again, so I clean installed 10.5.2 only to find the problem was still there. I now have no "safe" build, which is why I am here asking for help. I have since installed the 10.5.4 update again.
-- My symptoms are similar to many in these forums.
My wireless signal will stay full and steady with little to no activity (overnight, no programs), however after using more request intensive services (chat, bittorrent, skype, opening multiple http pages) my wireless signal, as shown in the menu "fan" indicator, will drop from 4/4 to 1/4. At this point I will either lose connection entirely and have to turn airport off/on, or my connection will struggle for a few minutes (hovers around 1/4 - 3/4 bars) before dying and requiring the off/on treatment, I have never seen the connection recover from it's dying phase.
-- My details are as follows:
As you will see from the following details, My iMac 24" has a static IP and am using the Open DNS servers. I am running a 54Mb wireless router with no security (my neighbours are all old Japanese people) connected to a fibre optic router (100/100 Mbit connection). My wireless router is an old D-Link model, but I cannot find the model name for the life of me, the unit is completely unbranded, I only know it's a D-Link from the iStumbler readout. Thus a firmware update is the only solution, which I have not been able to pursue. The router is positioned two floors above me, which is why the transmit rate is low. I have however, been using the router with no issues for over 3 years.
wireless working with full signal (4/4 bars):
!http://dl.getdropbox.com/u/49787/working_fan.jpg!
/system/library/privateframeworks/apple80211.framework/versions/current/resource s/airport -I
agrCtlRSSI: -84
agrExtRSSI: 0
agrCtlNoise: -87
agrExtNoise: 0
state: running
op mode: station
lastTxRate: 24
maxRate: 54
lastAssocStatus: 0
802.11 auth: open
link auth: unknown
BSSID: 0:90:4b:15:62:a0
SSID: wlan-crap
MCS: -1
channel: 12
/system/library/privateframeworks/apple80211.framework/versions/current/resource s/airport -s
SSID BSSID RSSI CHANNEL SECURITY (auth/unicast/group)
wlan-crap 00:90:4b:15:62:a0 -84 12 NONE
wireless throwing a fit (1/4 bars)
!http://dl.getdropbox.com/u/49787/notworking_fan.jpg!
/system/library/privateframeworks/apple80211.framework/versions/current/resource s/airport -I
agrCtlRSSI: -85
agrExtRSSI: 0
agrCtlNoise: -98
agrExtNoise: 0
state: running
op mode: station
lastTxRate: 1
maxRate: 54
lastAssocStatus: 0
802.11 auth: open
link auth: unknown
BSSID: 0:90:4b:15:62:a0
SSID: wlan-crap
MCS: -1
channel: 12
/system/library/privateframeworks/apple80211.framework/versions/current/resource s/airport -s
SSID BSSID RSSI CHANNEL SECURITY (auth/unicast/group)
wlan-crap 00:90:4b:15:62:a0 -85 12 NONE
Due to the fact that I am only getting a transmit rate of 24Mbit at full signal, I would consider buying a newer router as a solution.
Thank-you for reading, I hope a solution can be found.

RodneyW wrote:
Unfortunately, the bars are a poor measure of signal quality. To my (limited) understanding, the effectively measure the 'loudness' of the signal - but not its quality.
Actually, it's my understanding the bars are based on a signal level and quality metric, which is why they change over time.
For example, one scenario that would result in this type of behavior is an environment with lots of interference or noise from other routers or devices on the 2.4 GHz band.
The Mac will initially see the signal well and connect to it but as time goes on the degree of interference and noise is such that it's impossible to maintain a reliable connection to the router. As the Mac tries different things to keep a connection - including dropping the speed at which it's talking to the router - the signal "bars" will drop to reflect those reception difficulties. Finally if it can no longer maintain a reliable connection of any type it will just be dropped.
The beacons lost errors being emitted means that the scenario I've outlined above may very well be playing out. WiFi relies on periodic beacon signals sent from the router to stay in sync with it.
Without the beacons, the connection cannot be maintained and the Mac must disassociate from the router.
If you're curious as to what 802.11 beacons are, there's a pretty nice writeup on them here; to briefly quote it:
The amount of overhead that the transmissions of beacon frames generate is substantial; however, the beacon serves a variety of functions. For example, each beacon transmission identifies the presence of an access point. By default, radio NICs passively scan all RF channels and listen for beacons coming from access points in order to find a suitable access point.
When a beacon is found, the radio NIC learns a great deal about that particular network. This enables a ranking of access points based on the received signal strength of the beacon, along with capability information regarding the network. The radio NIC can then associate with the most preferable access point.
After association, the station continues to scan for other beacons in case the signal from the currently-associated access point become too weak to maintain communications. As the radio NIC receives beacons from the associated access point, the radio NIC updates its local clock to maintain timing synchronization with the access point and other stations. In addition, the radio NIC will abide by any other changes, such as data rate, that the frame body of the beacon indicates.
The beacons also support stations implementing power saving mode. With infrastructure networks, the access point will buffer frames destined for sleeping stations and announce which radio NICs have frames waiting through the TIM that's part of the beacon. On the other hand, the beacon in ad hoc network marks the beginning of a period where stations buffering frames can alert sleeping stations that frames are waiting for delivery.
As you can see, beacons are very important. With them, a wireless LAN simply won't work.

Exchange calendar issues after iOS 7.04 upgrade

Outlook 2007 clients on Exchange 2010 server cannot see time as booked for someone via the free busy scheduling assistant on an entry scheduled after 11 months. Occurs only on users with iOs 7.04. No other issues reported with 7.04 yet. Has anyone else seen this? Users doingthe scheduling can temporarily use OWA instead of Outlook. Can be reproduced by having the 7.04 user create a repeating appointment with no end date, during their work hours. Anyone can check their free busy time from the scheduling assistant and check each week or month for the next year. Confirm directly from the calendar that the event is there with no end date. The time is shown as busy up until approx. the 11 month. Then after that the time is shown as free even though it is booked. In the suggested times bar on the right, the time slot is not free.

Mine too has stopped after this update. If you press and hold the home button, the screen that prompts "What can I help you with?" pops up but you never receive the audible tone that indicates you can speak. A reboot corrects this on the first attempt to use siri but on the second attempts (and all others after) the problem returns. This was after the 7.0.4 update. This worked fine prior to this update.

Wifi issues after 3.1.2 upgrade

Just upgraded my iphone 3g to the laest software and since then, whilst the phone connects to the network (no chnages to the neywork have been made) it loses connectivity randomly, and when acessing an app that uses the wifi, it just drops out to 3G or GPRS.. Have tried network settings reset, no change, have tried to foregt and recreate network, same problem persists. Any help greatly appreciated, or how can I back rev to the old software?

At risk of a 'me too'... iPodTouch upgrade with continued wi-fi issues.
Just upgraded to 3.1.2 in hope of solving wi-fi drop outs. But no... Tried 'reset network settings'; 'forget this network' and re log in etc. Had this issue with 3.1.1. Whole iPod backed up and reinstalled with 3.1.2 but no solution.
iMac / AppleTV on wi-fi network and no issues with connection dropping out so hopefully not issue with DSL modem / router setup.
I do not recall this problem with my old 1G (running 3.1.1) will test it again when I can get my hands on it.
My only thought is ... is this connected with the 'coma' issue. Seems that wi-fi connection is not there when I wake the iPod up...
Any thoughts would be appreciated.
CB

Reporting issues after SP1 to R2 upgrade

Similar Messages

Maybe you are looking for