Reporting level question

hello, i have a query and i have conditons on it now when data is displayed after passing through those conditions i want to display the data in ascending orderbased off of some column. how can i achieve that? thanks.

Hi,
If you want to view the values in the report based on ascending/descending order of values of a particular column, select the column characteristic, select properties, goto Display tab, and select 'Ascending' or'Descending' in the Sorting Section. The same applies if you want to sort by the characteristic in the rows as well.
Please note that this option would not be available for a selection in columns.
Hope this helps.
Regards
Snehith.

Similar Messages

Created Quiz in Captivate 4. How can I create a report on Question Level

I have created a quiz in Captivate 4. I would like to create a report on question level. for e.g., I'd like to determine the no. of users that answered wrong on specific question consistently. This helps us to go back and tweak the quiz to make it more learning friendly.

Hi there
This is normally handled by virtue of installing a Learning Management System (LMS). You then upload the Captivate into the LMS and the LMS handles aggregating and keeping track of performance.
Captivate does offer an E-Mail reporting function, but it's far from reliable and not remotely secure. Additionally you would be forced to hand tally and track responses if you are fortunate enough for it to actually SEND responses.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Subracting dates at report level , to get difference in days.

Hi team,
I have 2 Key figure End date & start date & I need to present a difference between these dates in form of days .
Firstly it is possible at report level , by using process value as date [DATE] on both the end & start date fields , later subtract start date from end date.
I am nt sure whether out put wil b accurate .
Is there any functional module already existing tht cn , give the difference between dates in no of days?

Hi all,
about this procedure, my questions are:
1) can this procedure be applied if start and end date are attributes of a given infoobject?
2) if "yes" on point "1)", how can you avoid aggregation? In this case, summarization is not meaninful. Example: a given project have a "start date" and an "end date", so the difference between these dates is project duration. In a cube multiple records refers to the same project hence these dates should not be summarized
3) does these procedure work on a multiprovider?
My questions arises because I'm trying to compute with dates on a multiprovider, dates are attributes and unfortunately it seems not to work.
Any help?
Thx!
LJ

Blank Records showing at Infoprovider level..how to eliminate@ Report level

Hello Experts,
I am facing an issue. For a particular matierial in the Bex Report 2 KF values must be equl.
this is the complete scenario:
Matirial Total Target Actual Val BIO Actual Val
81271071 9550,52 4,793,67
In the above scenario Total Target Actual Val must be equl to Bio Actual Val.
I checked all the restrictions on the KF. 2 KFs are restricted by the same KF (Condition Base Value I ) .
Other than that for KF Total Target Actual Val restrictions are on Condition Type, Matierial Group 3. And for the KF BIO Actual Val restrictions are Red Group For Rebate.
I checked the data @ Infoprovider level for both the Good and Bad Test Cases. And found that for the Bad Test Case, if i give the input for Red Group for Rebate charactoristic there is no blank records are showing and where as if i will not give the input for Red Group for Rebate there are some blank records are showing up and adding those blank records.
Where as for the Good Test Case even if i provided the input for Red Group for Rebate or not, there is no blank records are showing up and in the report both the KFs are showing the equal values itself..
user requirement is at the report level both the KFs must be equal.
Here in the above up to now what i have done, i have provided the information.
requesting all, kindly give me the reply how can i solve this issue. Expecting more and more bright suggestions .
Thanks,
SN.

Just a quick question. Have you restricted your KFs unnecessarily? Are the semantic keys valid if debited? Like, sometimes the clearing doc #s are no entered for a open po# and necessary for a closed one. In such case, have you checked if the semantic key is correctly defined? Cubes must help you aggregate data & reflect them within one line item as in your case.

WebI report - Report filters question

All,
please help me in understanding if it's possible to have a report filter containing all the possibile values for the dimension it refers to, so that changing the value in this filter, the query is refreshed and shows data according to the new selection.
E.g. In a WebI report I have a table with columns DEPARTMENT, SALES_VALUE and a prompt for "MONTH", so that data in the report are referred to a single month. If I insert the MONTH dimension as a report filter, the drop down list shows only the month selected in the prompt.
My question: is it possible having MONTH query filter drop down list containing all months (not only the month selected in the prompt), so that I can refresh data in the report changing selection in this list? I mean, In the moment I choose another MONTH from the drop down list associated to the report filter, the report should refresh data (re-launch queries) according to the new month.
Hope I've been understandable in some way...
Many thanks for your valuable help!

Hi,
It is not possible to have the data for all the months if you are having a prompt on month and selecting only 1 in it as an input.
If you want the use of report filter then you have to remove prompt from the report as it will always bring the data for
a single month. You can remove the prompt and can have the filter at the report level, so that when you refresh the query for
the 1st time then whole 12 month of data will be available and then you will be able to select the months from the
drop down and will be able to see the monthly data without need to refresh again.
Regards,
Rohit

Command level parameters and report level parameters

Hi All,
I know it is a basic question.But please guide me.

Hi Divya,
Please be specific about what you're looking for help on. Are you trying to understand the difference between the two?
- Command Level promps are created in the 'Add Command' option and are usually added in the where clause to filter records on the database based on the value/s entered by the user
- Report Level prompts are created in the report via the Field Explorer and serve the same purpose as the Command Level prompts however offer greater functionality and options for the prompts - e.g creating a date range prompt
P.S: There are of course many other differences too.
-Abhilash

Cannot implment security setting on the report level - SSRS 2012

Hi All:
I am having a weird problem on my SSRS 2012 reporting portal, I cannot click any of the drop down list like the example below. Is there anything from the setting?
It is not only about the reporting level, any arrow on the reporting server, like data source, are kind of dead as well.
Please kindly help and thanks in advance.
Cheers
Johnny

Hi JohnnyKahWang,
According to your description, you can view folders and reports on report manager, but you could not click any of the drop down list.
Reporting Services uses role-based security to grant user access to a report server, and there are two types of roles: Item-level roles and System-level roles. Access to reports, folders, models, shared data sources, and resources is controlled through item-level
role assignments. Each user who requires access to a report server must have at least one item-level role assignment. On a new installation, only local administrators have access to a report server. In this case, a local administrator need to create a role
assignment which has Manage folders and Manage reports task to the account by following steps:
Click Home at the top of the page to open the Report Manager home page.
Click the drop-down arrow next to the folders and reports.
Click New Role Assignment.
In Group or user name, specify the name of a group or account.
Select a role which can perform Manage folders and Manage reports tasks.
Click OK to save the role assignments.
For more information about Setting Item-Level Permissions on a Report Server, please refer to the following document:
http://technet.microsoft.com/en-us/library/aa337471(v=sql.105).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

How to create keyfigure in Reporting level.

Hi Experts.
My question is How to create keyfigure in Reporting level {not
calculated keyfigure, Restricted
keyfigure and also Newselection,New formula}
thanks&regards
pradeep k pavan

You can use formula variable to populate numbers. Again you can use virtual key figures if you want to populate values on fly. But what exactly is the requirement?

Reporting Level - Can someone please explain this attribute?

All - I am a relative newbie to Siebel on Demand but creating reports with other tools for years. I recently came across some reports that I have inherited that are constantly giving us trouble. They are basic reports that look at the count of calls, meetings, etc. for a given user. What we are finding is that we have used this reporting level attribute to filter but depending on the level of manager logging in it is causing problems. Some people can't see the data and some get a massive amount of duplicated data.
When it is all said and done we are looking for a simple manager-to-rep list of the counts of these activities. After looking at the reporitng level value it would look like an indicator of relative position from the lowest level in the reports-to heirarchy. We will generally filter for a level = 0 (or maybe 1) in most reports but what I want is a way to control that based on the user. My requirement is to have the level they can see and the detail at one level lower but I dont' fully understand how that gets created or how I can use system variables to find the user's level to control it.
Anyone that has any background info on this or how I can control a basic anaylytic report in a more maintainable fashion to show my stuff and subtotals at one level lower that would be greatly appreciated.

Not sure if I can help with the specific report, but I will try to shed some more light on Reporting Level.
In any report where the Owned By User dimension is exposed, you can find the Reporting Level field. Each user is part of a reporting hierarchy, derived from the "Reports To" value in their user profile.
The best way to see this is to create a simple report with the User Email, Reporting Level, and Manager Email. This will show you the manager at each level. You can use this to expose and filter on the full management hierarchy.
Level 0 = the user. All users have a value of themselves as Manager at Level 0.
Level 1 = Reports To - who the user directly reports to.
Level 2+ = Up the chain...
You may want to take a look at some of the pre-built reports to see how this can be used to achieve Team based reports, such as "Team Pipeline Analysis", "Team Sales Effectiveness Analysis", and "Team Activity Analysis". You can open any of the pre-buiilt reports to use as starting points as well.

Changing date format at reporting level

Hello,
Will u plz tell me how can i change the date format at reporting level?
I want to display date in dd/mm/yyyy, but by default its showing mm/dd/yyyy.
Delta is already loaded in the system, so i don't want to disturb regular data loading.
Is there any way so that i can change the format of date.
Plz help me out.
Thanks,
Regards,
Steve

Hi steve
There r so many postings on the same topic
go through these previous threads
date format
Date format
u can find solution
regards
Ravi Kiran

Variance calculation at reporting level

Dear All,
There are two key figures in my report - Plan and Actual amount. Now user wants to see the variance between these two in % terms.
Formula is ( Acutal - plan )/plan *100 . Now this formula works when plan value is not zero when ever the plan value is zero the display will be X . Now user wants to put a check say whenever the plan is zero then display 100 % variance. How can we achieve this at reporting level.
Thanks and Regards,
Anup.

Hi Anup,
Try something like this:
(Plan = 0)*100 + (Plan <.> 0)*((Acutal - Plan) / Plan * 100)
I'm not sure but you might have to use the NOERR function in case of division by zero:
(Plan = 0)*100 + (Plan <.> 0)*NOERR((Acutal - Plan) / Plan * 100)
In both samples remove the "."
Hope it helps.
BR
Stefan
Edited by: Stefan Stefansson on Jul 21, 2009 1:49 PM

Logic at reporting level to compare two dates .

Dear Friends,
I have a scenario here , where i have a counter keyfigure in my DSO which has constant value 1 . there is two dates : Stock issue date & stock receipt date . At the reporting level , in selection screen there is an input on stock receipt date . Now i want to show key figure counter for which stock issue date lies between the stock receipt date which the user enters .
Kindly suggest on this matter .
Thanks & regards,
Ashutosh Singh

1. Create a customer exit variable on Stock issue date. Pass on the value the user enters through exit to this variable.
2. Create a New formula with the counter keyfigure and restrict it based on the customr exit variable.
This will work correctly if Stock issue date and stock receipt date are not displayed in the report.
If it is displayed, then if the stock issue date lies between the stock receipt date it will have the value as 1 else 0.
Hope this helps.
rgds, Ghuru

Text data is not displaying at Report level for an Infoobject Item name

Hi All,
Texts data is maintained at Info object level but text information is not displaying at Report level for an object. I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information. This problem occured in QA(Quality) system but not replicated in Production system. I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend. In production it is displaying textal data for the IO.
Thanks in advance.

Hi All,
Thanks for your valuable information. I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
As per my understanding might be the issue with Patches will be checking with Basis team on the same.
Please suggest if you have any alternatives to fix the issue.

BO/BW Report Level Calculation and Prompts

Hi,
There is an infoprovider in BI , delta enabled.Start Date and End Date are two fields in Infoprovider.
The requirement is to have an Use Indicator Prompt having values Y or N.
if the prompt input is Y , then display only those records where the current date is between start and end date,
and if the prompt input is N, then display all values.
Since the infoprovider will have delta loading, this needs to be done in BI/BO Report Level.
If I have a Keyfigure in BI (using the above logic, having values 0 and 1), then this keyfigure needs to be selected in Web I Report(since the Use Indicator Prompt will be on this keyfigure), if not selected then all the keyfigures will be blank.
I have changed the aggregation of the Keyfigure to 'None' in Universe, but still it doesnt work

Hi,
first of all you should not leverage the InfoProvider directly but instead use the BEx Query and this type of prompting could then be done as an EXIT variable in the BEx query.
ingo

How to improve the query performance in to report level and designer level

How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......

first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr

Reporting level question

Similar Messages

Maybe you are looking for