Reporting on Slow Moving / Non Moving Stock

Morning,
can anyone help on the above please.
How would i run a report on slow moving / non moving stock?
Regards
P

MC46 you can get the slow moving items.

Similar Messages

  • Custom Report for slow and fast moving items

    Dear Xperts,
    My client wants to develop a new report for slow and fast moving items, I checked the std report MC46 however as per std SAP design this report does not consider the special stock like project stock (Q)...could you please help me to know how can develop this new report with following input and output fields?
    Input fields:
    Plant
    Material
    Material Group
    MRP Area
    Special Stock Indicator
    Special Stock (Type)
    Output Fields:
    Material
    Material type
    Material group
    MRP Controller
    MRP Area
    ABC indicator
    Material price
    Category field – Slow, Fast, Non-moving
    Current Stock
    Last Issue Date
    Thanks in Advance
    Regards
    Rahul

    Dear Rahul,
    If you required  project stock and consignment stock with valuated stock report in same place you need to generate new info structure as given below link. Or you can go with customized report with abaper.
    Info structure validation
    Regards
    Sanjeet Kumar

  • Product wise slow moving / Non-moving

    Hi
    what is Product wise slow moving / Non-moving?
    thanks,
    kiran.M

    Slow moving is nothing but if i am not using particular Material for last 1 month then i can call this MATNR is Slow Moving MATNR. If i am not using MATNR for last one year it is Non-Moving MATNR.
    Regards
    Prabhu

  • Slow moving /non moving stock

    hi sap gures,
    plz tell me what are the slow moving and non moving stock.give me SAP standard t codes for these report if its there in sap.

    Hi Prasad
    for Non moving  T- code           *mc 50
    for slow moving stock T-code-mc46*
    Materials that have been consumed little or not at all over a long period of time are referred to as slow-moving items
    Dead stock is the part of your warehouse stock that has not been used for a certain period of time
    for further details pls refer
    link:[http://help.sap.com/saphelp_45b/helpdata/en/c1/376130449a11d188fe0000e8322f96/frameset.htm]
    Regards
    Vikrant
    Edited by: Vikrant Choudhary on Feb 23, 2009 12:06 PM

  • Price Change For Slow Moving & Non Moving Items

    Dear all;
    What will be the transaction for the slowmoving and non moving items .is there  a separate transaction for the same ? and what will be the report  to see the price chane history for certain material?
    Thanking You;
    Regards;
    Joydeep Mukherjee

    Dear Friend,
    MC50: Based on you date range selected, The logic here is "No
    Consumption" below certain Stock Level.
    MC46: Based on the date range selected, if there was no movements
    (Consumption), the system would classify them as Slow Movers
    and Goto MM04, Enter the material no and plant check the changes made to that material master. Ofcourse, it'll give all the changes made to that material master
    Check Trn CKMPCSEARCH. It records all the price change docs (Type PR), Ref. Transactn PRCHG
    Regards
    Anjan

  • Valuation of Fast moving, Non-Moving Items, Dead Stock

    Hi experts,
    Would like to take your valuable suggestions. My Client is procuring certain materials and those materials could be stored for one year, two year, three year.
    My client requires the material cost to be depreciated by 33% after one year, and material cost to be depreciated by 66 % for Second year and similarly for third year they want 100 % Deprication.
    Are there any standard transactions to check the validity of material. which has crossed one year,two year or three year ?
    How to depreciate the value yearly ?
    I Just heard of Maintaing some ABC indicator in Material master and running the stock report.
    And to reduce the value of material using MR21 ?
    Weather it is correct or advice any other solution is there ?
    Best Regards
    Javeed Ahamed
    SAP-MM-Consultant
    waiting for your Positive Feedback.

    Hi Javeed,
    There are two things involved in this.
    Validity date for the material. This can be created by creating batch for material in MSC1N where you have the option to give SLED(Shell life expiration date). So those material belonging to particluar batch can not be used one SLED date is over. There are two other transactions through which you can chnage the batch properites. MSC2N( Change Batch), MSC3n(Display Batch) & MSC4n(Discplay Change).
    For changing the material price you can very well use MR21.
    I hope this helps.

  • Non-Moving /Slow Moving stocks

    Hi
    Is any Standard Oracle Report available which give
    us the Sub_inventory wise/Item wise stock which are
    not moved (i.e. No transactions are happening since a
    given date).
    I hv check the Inactive Item Report available in
    Inventory. What is exactly this report ?
    Can anybody help us.
    Regards.
    Navdeep

    hi,
    The reports gives you an idea abt which stock is not used from many days or which is not even used or had no movements for the same...When you see the report you can give the periods in between which the system evaluates the materials movements...if the material has no movement in the given period it is called dead stock...and if the material is consumed out of it for given period then it is called slow moving stock..
    Pls check both the reports carefully...
    Check MC46 - slow moving items
    MC50  - Dead stock(You can say dead stock as non moving stock )
    If there is no selection shown by the system then it means that all the material/stock is used properly on time and is consumed properly...
    Regards
    Priyanka.P
    Edited by: Priyanka Paltanwale on Dec 2, 2008 7:27 AM

  • Non-moving stock report

    Dear BW Gurus,
                            My client needs a "Non-moving stock report".I went thro the help.sap.com and just found one query for "Slow moving items" which is designed upon the Multiprovider 0IC_MP04.I just want to know whether i can use the above query for the Non-moving stock???
    2)0IC_MP04 Multiprovider obtains data only from 0IC_C03 cube,so whats the real reason behind using a multiprovider rather than just 0IC_C03..????
    Would appreciate ur help on this...
    manythanks
    arun

    Hi Arun,
    In R/3, you can go to MC50 transaction to see the non -moving stock report.
    Also check MC46 & MC.9
    I m not sure about the BW Business content report for non-moving stock.
    What you can do is, see the satandard R/3 report and create report on IC_C03.
    Cheers
    Praveen

  • How to create report for Slow / Non moving inventory

    Hi
    I want to create one report Slow / Non moving inventory reports.
    I need it in following form
    Plant     Material     Desc     UOM     Current stock     Value     Last consumption date      Last Movement date
    I have found & confirmend table & fields names from which data should come into this report which is as follows
    Plant(T001L - WERKS)     Material(MARA - MATNR)     Desc(MAKT - MAKTX)     UOM(MARA - MEINS )     Current stock(MARD - LABST)               Value(MBEW-SALK3.)     Last consumption date (BUDAT - MKPF)          Last Movement date(BUDAT - MKPF)
    As I am creating this report at first time, I am not getting how to go ahead.
    Do I need to create new datasource as existing datasource doesnt have all of these fields..
    Please help me.
    Dont send me links & documents which are there on sdn. I already have gone through it.
    Thanks
    Swati

    Hi
    You have to create Generic Data source as you know the filed/tables names.
    Hope you know how to build a Generic Delta or else.https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Create a Generic Data Source
    a). Select the Data Source type and assign a technical name to it.
    b). Choose Create The screen for creating a generic Data Source appears.
    3. a) Choose an application Component to which the data source is to be assigned.
    b) Enter the descriptive texts. You can choose these freely.c) Choose Generic Delta.
    4. Specify the delta-specific field and the type for this field. Maintain thesettings for the generic delta:
    Specify a safety interval. (NOTE: Safety interval should be set sothat no document is missed u2013 even if it
    was not stored in the DB table whenthe extraction took place.
    4. Select Delta type: New status for changed records (I.e.after-image); This can be used with Data target ODS (AIE). Additive Delta (I.e. aggregated data records) (ADD)Then choose Save.
    6. After step 4, the screen of step 3 comes back. Now choose Save again. This will generate the data source. After generating the data source, you will see the Delta Update flag selected.
    7. Choose Save again.
    Hope it helps

  • Report on Non-Moving stock

    Hi friends,
    I have tried MC 50 and other reports for taking the List of non-moving stock. But, when I cross verify the report for the items with zero movement in MB51 for the movements 261, 601, 541, I observe further movements.
    Kindly let me know the procedure for generating the non-moving stock report for the storage locations in a particular period.
    Thanks,
    Dhanapal Namasivayam

    Hi Dhanpal
    All the movements are in the table MSEG.
    You need to build logic around this to come to non moving stock.
    Thanks

  • Report on Slow-moving item in sap MM

    Dear All,
    I am facing problem in preparing functional specification for a Z report.The requirement details are given below
    MC46 gives me a list of all items that have not got consumed since the last period (defined in terms of 'no of days' on the screen before executing the report) This report  give  a list of items that have shown nil consumption in the defined period. This list helps us analyze and categorize these items as Slow-moving or Non-Moving items. The output is in terms of Part no and Part Description.
    Example; Suppose we are executing the transaction  on say 29.10.2013.The system ,say give list of materials X1,X2 and X3 with nil consumption in the defined. The transactions suppose is again executed
    on 29.10.2011.The report  say again give a list of materials X1 and X3 with nil consumption. The material
    X2 is excluded from the report  as it might have been consumed in certain business processes(either issued to cost center or issued to production).
    The client wants a report from where it is possible to determine a list of materials along with consumption
    and the date on which the  material have moved out of stock for consumption. In otherworldu2019s we can say the report should give :
                        stock on starting  date(say 29.10.2013)
                        Consumption/movement in terms of date and quantity
    The problem is that when the transaction MC46 is run the next time(say on 29.11.2013 or any day after
    29.10.2013) there might be materials which might have got consumed in the interim period and therefore have got excluded from the latest list. We need to have a look at these interim materials to analyze their movement/consumption.MC 46  Report does not give details of openinf stock, closing stock and the purpose for which the stock have moved out of stock
    The client wants a Z-Report which will give details about the material which have moved out of stock when the report will be executed ,opening stock,closing stock.The detail requirement are given below
    The report will assist the client to get a list   of all such items with reference to a starting date and their movement in the period (period from the starting date to the run date)
    Selection Screen(Input)
    Opening Date
    Closing date
    Movement type
    Plant
    Output
    Material nos(Material which have moved out of stock when the program was last executed)
    Movement type
    Movement date
    opening stock qty
    opening stock value
    closing stock qty
    closing stock value
    I request if any one can help in preparing functional specifications.

    thanx for reply ,
    but plez read the requirement above mention.i understood  what are you saying .

  • Technical field/table for Non moving report

    Dear All,
    I want the technical table name and field name for the following to make the Slow/NON moving stock report.
    Material Number
    Decription
    stock in hand
    batch no
    UOM
    Value
    Exp Date
    Mfg Date
    Date of last consumption
    Total No of days from last consumption
    Where used FG
    Date of Purchase
    Vendor
    Thanks & Regards,
    Sandeep.

    for a non-moving report you have to look at the stock and need to compare it probably with movements directly or consumptions stored in infostructures.
    depending on the basis you want analyze you may have to read much more tables than you expect and you certainly have the below listed fields in many tables
    Material Number (MARD, MCHA1, MCHB)
    Decription - MAKT
    stock in hand - MARD, MCHB and many other tables in case of special stock
    batch no . MCHA, MCH1, MCHB
    UOM - MARA, MARM,
    Value - MBEW - and may other tables in case of special stock
    Exp Date - MCHA, MCH1
    Mfg Date - MCHA, MCH1
    Date of last consumption - MKPF, SO32
    Total No of days from last consumption - have to be calculated by yourself in the report
    Where used FG - STPO
    Date of Purchase - EKKO
    Vendor - EKKO, MCHA, MCH1

  • MC46-Slow moving,MC50-Non moving items LOGIC?

    Hi,
    my client is not using these reports currently.
    He wants to understand the logic behind these reports.
    I'm trying hard but not able to understand that logic.
    Please explain me step by step what to do so that i can learn first n then explain to my client
    Regards

    Hi Piyush
    Slow moving---Items on which inventory Trnx. has done..such as Gr..Iv..goods Issue In a given time span
    If u check MC46 it will ask last posting days
    Non Moving:-Items on which inventory Trnx. has not done..such as Gr..Iv..goods Issue In a given time span.
    If u check MC50 it will ask period to analyze i.e.Dead stock in a period of time...Means items on which no Trnx. have been passed for given period
    I hope it will clear ur doubt little bit
    Vishal...

  • Report for slow moving material.

    Hi friends
    I want to create report for slow & fast moving materials..
    I have to add following fields in the report
    Material, Unit of Measure, Current Stock, Value, Last consumption date, Last movement date...
    Now I dont have all these fields toghether in any of the datasources..
    What I need to do? Should I create new Datasource with all these fileds..
    Has anyone done this kind of report before?
    Please suggest..
    Regards
    Swati

    Hello,
    For slow moving materials , use can use InfoSet to design the same.The infoset will have 0Material on the left hand side and the DSO which holds the transcation data.
    or 
    u can install the standard content 'slow moving material' query and multiprovider 0ic_mc01.
    You can get some help from there.
    or
    try searching in forums with the messgae "slow moving items".you will get useful info.
    Regards,
    Dhanya

  • Slow moving and non moving inventory

    Hi Guru's,
                   I have to prepare a report of slow moving and dead stock report. so can anybody will help please....

    Hi,
    Try with folowing t.codes,
    MC50 - Dead Stock ,
    MC46 - Slow-moving items
    Regards,
    Biju K

Maybe you are looking for