Technical field/table for Non moving report

Dear All,
I want the technical table name and field name for the following to make the Slow/NON moving stock report.
Material Number
Decription
stock in hand
batch no
UOM
Value
Exp Date
Mfg Date
Date of last consumption
Total No of days from last consumption
Where used FG
Date of Purchase
Vendor
Thanks & Regards,
Sandeep.

for a non-moving report you have to look at the stock and need to compare it probably with movements directly or consumptions stored in infostructures.
depending on the basis you want analyze you may have to read much more tables than you expect and you certainly have the below listed fields in many tables
Material Number (MARD, MCHA1, MCHB)
Decription - MAKT
stock in hand - MARD, MCHB and many other tables in case of special stock
batch no . MCHA, MCH1, MCHB
UOM - MARA, MARM,
Value - MBEW - and may other tables in case of special stock
Exp Date - MCHA, MCH1
Mfg Date - MCHA, MCH1
Date of last consumption - MKPF, SO32
Total No of days from last consumption - have to be calculated by yourself in the report
Where used FG - STPO
Date of Purchase - EKKO
Vendor - EKKO, MCHA, MCH1

Similar Messages

  • Define the Characteristics of the validity table for non-cumulatives

    Hi Friends,
      Here I am designing MultiProvider ( ZCA_M01), based on the Two Business content info cubes (0IC_C03 & 0SD_C03 ) & one customized info cube (ZPUR_C01).
    I done Identification for char & keyfigures also.
    When i trying to activating the Multiprovider, here i am getting the error , error message is : Define the Characteristics of the validity table for non-cumulatives.
    Even here I am attaching the error message help also.
    Message no. R7846
    Diagnosis
    The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
    The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
    Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
    Examples of such characteristics are:
    •     A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
    •     the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
    Procedure
    Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
    In the example above, the characteristics "plan/actual" and  "plant" must be selected.
    The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.
    Please take as a high priority.
    Thanks & Regards,
    Vanarasi Venkat.

    Hi Venkat,
    If you want to include 0IC_C03 cube in your multi provider the you must make sure that the time characterestics ( 0CALDAY, 0CALMONTH ....) are present in all of the other info providers which you are including in the MP. The Time char to choose depends upon the Inventory cube in which you have mentioned during the definition. As you are using the standard cube 0IC_C03 it has the time char as 0CALDAY. Try to include this in all the other info providers and dont include more tha one Non-cumulative in the MP.
    Try this and see if it helps....

  • Technical Field name for Usage

    Hi,
    Could anyone please tell me whether there is any SAP standard field (technical) name & Segment structure for u201CUsageu201D  for the automatic determination of Item Category.
    More details:
    User wants to send sales order through a non SAP application. So when the order comes to SAP through IDoc, I want the item category to be determined automatically. As you all knew, the rule for automatic determination of item category is Sales order type + Item cat. Group + Usage + HLevItCa. So I just need technical field name for Usage for XI mapping.
    Is there SAP standard field for Usage just like we have field name (PSTYV) & segment structure (E1EDP01)for item category? Or it should only be achieved through any user exit? Could anyone ever done such setting? Could you please give me some inputs.
    Thank you.
    Regards, Sats.

    HI
    VWPOS - Item Category usage
    Check using path
    SPRO --> Sales and Distribution --> Sales --> Sales Document --> Define item Category Usage
    Thanks & Regards
    Edited by: WISH on May 17, 2010 12:13 PM

  • Table for non ledger line items

    hi
    Iam pulling the report for non leading ledger with T code FAGLB03 and found 2 cost objects(cost center and WBSE)  in line items whereas for leading ledger only WBSE is showing. We know that for leading ledger entries are maintained in table  FAGLFLEXT.  From which table non leading ledger entries gets pulled. Your early response is appreciated.
    In the entry view cost center is there but in GL view cost center is not populated.

    Thanks Bhandari
    But user posting with 2 real objects (WBSE and CC) for which only WBSE is updating in total table. When i run line item report using FAGLB03, both objects are showing for non leading ledger similar to FS10N. But only WBSE is showing for leading ledger. Is FAGLB03 derive the data from BSEG table for non leading ledger.
    Thanks
    Venkatesh

  • I have created two tables for my new  report under one transport request.

    Unwanted table transported
    I have created two tables for my new  report under one transport request.
    But I only need one table and the second table I was supposed to delete.
    However by mistake, with out deleting the second tableu2026 the transport request is released and moved to quality system.
    how to handle this issue. 
    I am not sure any additional changes for this program.
    Could you please suggest me an idea.
    Thanks in adv

    >
    sam kumar wrote:
    > Unwanted table transported
    > I have created two tables for my new  report under one transport request.
    > But I only need one table and the second table I was supposed to delete.
    > However by mistake, with out deleting the second tableu2026 the transport request is released and moved to quality system.
    >
    > how to handle this issue. 
    >
    > I am not sure any additional changes for this program.
    > Could you please suggest me an idea.
    >
    > Thanks in adv
    Does one custom table more or less really matter?  If you really want delete it, delete the table in DEV which will put it into a new transport and get that transport moved to TEST.

  • Table for Profit center report grp

    Dear Sapgurs,
    in this t code GR55 system it showing list of Profit center report grps, can u please tell me what is the table for Table for Profit center report grp and how to create new profit center report group, Once we will click on F1 system it shows structure not tables.
    Reg
    Hanu
    Moderator: Please, search SDN. This questions has been answered several times.

    EC-PCA (KE1)         Profit Center Accounting
    CEPC                 Profit Center Master Data Table   MANDT / PRCTR / DATBI / KOKRS
    CEPCT                Texts for Profit Center Master Da MANDT / SPRAS / PRCTR / DATBI
    CEPC_BUKRS           Assignment of Profit Center to a  MANDT / KOKRS / PRCTR / BUKRS
    GLPCA                EC-PCA: Actual Line Items         RCLNT / GL_SIRID
    GLPCC                EC-PCA: Transaction Attributes    MANDT / OBJNR
    GLPCO                EC-PCA: Object Table for Account  MANDT / OBJNR
    GLPCP                EC-PCA: Plan Line Items           RCLNT / GL_SIRID
    thanks & Regards
    Swathi
    Edited by: swathi sajja on Aug 5, 2008 12:08 PM

  • Field exits for non-editable field

    Hi All,
    can I write field exit for non-editable field?
    Thanks in advance...
    bye.

    hi,
    i think you can, just try it.
    But when you have to change it, because of a certain exception in the fieldexit, it is impossible to change the field.
    Hans

  • What is table field name for order status report  of rate per unit and  bal

    hi  i want to make FS for order status report i almost get all table and field but i don't get only two field  rate per unit and balance value  table field didn't get please help me searching in field and table
      i want to develop my status report

    Hi,
    Check tables VBAK and VBAP wherein you will get all header and item details.
    VBUK and VBUP for header and line item statuses.
    KONV would give you rates/pricing details for each condition type determines in the sales order.
    VBAK-KNUMV = KONV-KNUMV is how you relate both of them.
    Hope that helps.
    Regards,
    Amit

  • Table for KE30 COPA report

    Hi,
    I have written COPA Report using t.codes  KE35 and KE32 for KE30 COPA report...some values are not pickup
    Could u tel me KE30 Report ...reffering on which table of CE1 table or else ?  so that i can try .
    Thanks & Regards.
    Vinu.

    Hi Vinu
    To reconcile your output of KE30 with actual posted values
    1. Ensure that you have covered all posible record types in your report definition
    2. Ensure you have covered all value fields and none has been missed out
    3. Check if you have specified any char value which is filtering the output so that all values are not displayed in the output
    Identify the value field where the values are not matching, say, Sales Revenue....
    Now execute your KE30 reports and drill down by product or customer and compare side by side with KE24.. Check in which product or which customer is the issue.... Adopt this mechanism and you will possbly come to know of the true reason
    Regards
    Ajay M

  • Hi, I want to know that standard tables for vendor analasys report and sale

    Hi, I want to know that standard reports for vendor analasys report and sale order and customer order report...? why most probably we use tables and fetch the fields rather than standard reports >

    Hi
    This is the sample report for vendor aging:
    Std reports Tcodes are:
    customer : s_alr_87012178
    vendor : s_alr_87012084
    Custom designed:
    REPORT zfi_customer_ageing
    NO STANDARD PAGE HEADING
    LINE-COUNT 58
    line-size 168
    MESSAGE-ID zh_msg.
    D A T A B A S E T A B L E S D E C L A R A T I O N
    TABLES: kna1, " Customer Master (General)
    t001, " Company Codes
    rfpdo.
    I N T E R N A L T A B L E S D E C L A R A T I O N S *
    Internal Table for Customer Open Items Data
    DATA: BEGIN OF int_bsid OCCURS 0,
    kunnr LIKE bsid-kunnr, " Customer Number
    name1 LIKE kna1-name1, " Customer Name
    shkzg LIKE bsid-shkzg, " Dr/Cr Indicator
    belnr LIKE bsid-belnr, " Document Number
    xblnr LIKE bsid-xblnr, " Ref Doc No
    blart LIKE bsid-blart, " Document Type
    zfbdt LIKE bsid-zfbdt, " Base Line Date
    zbd1t LIKE bsid-zbd1t, " Due date1
    zbd2t LIKE bsid-zbd2t, " Due Date2
    zbd3t LIKE bsid-zbd3t, " Due Date3
    waers LIKE bsid-waers, " Currency
    dmbtr LIKE bsid-dmbtr, " Amount in Local Curr
    END OF int_bsid.
    Internal Table for Amounts Sum Up Data
    DATA: BEGIN OF int_final OCCURS 0,
    kunnr LIKE bsid-kunnr, " Customer Number
    name1 LIKE kna1-name1, " Customer Name
    total1 LIKE bsid-dmbtr, " Amount in Local Curr
    total2 LIKE bsid-dmbtr, " Amount in Local Curr
    total3 LIKE bsid-dmbtr, " Amount in Local Curr
    total4 LIKE bsid-dmbtr, " Amount in Local Curr
    total5 LIKE bsid-dmbtr, " Amount in Local Curr
    total6 LIKE bsid-dmbtr, " Amount in Local Curr
    total LIKE bsid-dmbtr, " Amount in Local Curr
    END OF int_final.
    D A T A D E C L A R A T I O N S
    DATA : v_flag, " Flag
    v_gtotal1 LIKE bsid-dmbtr, " Amount Totals
    v_gtotal2 LIKE bsid-dmbtr, " Amount Totals
    v_gtotal3 LIKE bsid-dmbtr, " Amount Totals
    v_gtotal4 LIKE bsid-dmbtr, " Amount Totals
    v_gtotal5 LIKE bsid-dmbtr, " Amount Totals
    v_gtotal6 LIKE bsid-dmbtr, " Amount Totals
    v_gtotal LIKE bsid-dmbtr, " Amount Totals
    v_subtotal1 LIKE bsid-dmbtr, " Amount Totals
    v_subtotal2 LIKE bsid-dmbtr, " Amount Totals
    v_subtotal3 LIKE bsid-dmbtr, " Amount Totals
    v_subtotal4 LIKE bsid-dmbtr, " Amount Totals
    v_subtotal5 LIKE bsid-dmbtr, " Amount Totals
    v_subtotal6 LIKE bsid-dmbtr, " Amount Totals
    v_subtotal LIKE bsid-dmbtr, " Amount Totals
    v_date LIKE bsid-zfbdt, " Due Date
    v_tage1(4), " Age 30 days
    v_tage2(4), " Age 60 days
    v_tage3(4), " Age 90 days
    v_fir(15), " Column Text1
    v_sec(15), " Column Text2
    v_thir(15), " Column Text3
    v_four(17), " Column Text4
    v_fidd(4), " Days field1
    v_sedd(4), " Days field2
    v_thdd(4), " Days field3
    v_fodd(4), " Days field4
    v_str TYPE SY-LISEL, " String
    v_str1(11), " String
    v_tage(3), " String
    v_date1(10). " Date field
    R A N G E D E C L A R A T I O N S
    RANGES: r_date1 FOR bsid-zfbdt, " Date Range 1
    r_date2 FOR bsid-zfbdt, " Date Range 2
    r_date3 FOR bsid-zfbdt, " Date Range 3
    r_date4 FOR bsid-zfbdt. " Date Range 4
    S E L E C T I O N S C R E E N *
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: s_kunnr FOR kna1-kunnr. "Customer account
    PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
    "Open items at key date
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
    PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
    p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
    p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
    p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
    SELECTION-SCREEN END OF BLOCK b3.
    A T S E L E C T I O N S C R E E N *
    AT SELECTION-SCREEN.
    Validate the screen fields
    PERFORM validate_flds.
    S T A R T O F S E L E C T I O N *
    START-OF-SELECTION.
    Fetch main data
    PERFORM fetch_data.
    T O P O F P A G E
    Header
    TOP-OF-PAGE.
    PERFORM header.
    E N D O F P A G E
    Footer
    END-OF-PAGE.
    ULINE.
    T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
    Top of Page in Secondary List
    TOP-OF-PAGE DURING LINE-SELECTION.
    PERFORM header1.
    A T L I N E S E L E C T I O N *
    AT LINE-SELECTION.
    Perform Line Selections
    PERFORM line_selection.
    E N D O F S E L E C T I O N
    END-OF-SELECTION.
    List generation
    PERFORM basic_list.
    *& Form validate_flds
    Validation of Selection Screen fields
    FORM validate_flds .
    Validate Customer Code
    CLEAR kna1-kunnr.
    SELECT kunnr UP TO 1 ROWS
    INTO kna1-kunnr
    FROM kna1
    WHERE kunnr IN s_kunnr AND
    spras = sy-langu.
    ENDSELECT.
    IF sy-subrc <> 0.
    MESSAGE e000 WITH 'Invalid Customer Code range'(023).
    ENDIF.
    Validate Company Code
    CLEAR t001-bukrs.
    SELECT bukrs UP TO 1 ROWS
    INTO t001-bukrs
    FROM t001
    WHERE bukrs = p_bukrs AND
    spras = sy-langu.
    ENDSELECT.
    IF sy-subrc <> 0.
    MESSAGE e021. " Invalid Company Code range
    ENDIF.
    IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
    ( p_tage1 > p_tage4 ).
    MESSAGE e999 WITH 'Column 1 greater'(004)
    'than Column# 2 or 3 or 4'(005).
    ENDIF.
    *column 2
    IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
    MESSAGE e999 WITH 'Column 2 greater'(006)
    'than Column# 3 or 4'(007).
    ENDIF.
    *column3
    IF ( p_tage3 > p_tage4 ).
    MESSAGE e999 WITH 'Column 3 greater'(008)
    'than Column#4'(009).
    ENDIF.
    ENDFORM. " validate_flds
    *& Form fetch_data
    Fetching Data from Database Tables
    FORM fetch_data .
    Date Range Population
    r_date1-sign = 'I'.
    r_date1-option = 'BT'.
    r_date1-low = p_allgst.
    r_date1-high = r_date1-low + p_tage1.
    APPEND r_date1.
    r_date2-sign = 'I'.
    r_date2-option = 'BT'.
    r_date2-low = r_date1-high + 1.
    r_date2-high = r_date1-low + p_tage2.
    APPEND r_date2.
    r_date3-sign = 'I'.
    r_date3-option = 'BT'.
    r_date3-low = r_date2-high + 1.
    r_date3-high = r_date1-low + p_tage3.
    APPEND r_date3.
    r_date4-sign = 'I'.
    r_date4-option = 'BT'.
    r_date4-low = r_date3-high + 1.
    r_date4-high = r_date1-low + p_tage4.
    APPEND r_date4.
    Select the Customer Open Items data from bsid
    SELECT l~kunnr
    l1~name1
    b~waers
    b~dmbtr
    b~zfbdt
    b~zbd1t
    b~zbd2t
    b~zbd3t
    b~belnr
    b~xblnr
    b~shkzg
    b~blart
    INTO CORRESPONDING FIELDS OF TABLE int_bsid
    FROM knb1 AS l INNER JOIN kna1 AS l1
    ON lkunnr = l1kunnr
    INNER JOIN bsid AS b
    ON lkunnr = bkunnr AND
    lbukrs = bbukrs
    WHERE l~kunnr IN s_kunnr AND
    l~bukrs = p_bukrs and
    b~zfbdt le p_allgst.
    IF SY-SUBRC <> 0.
    MESSAGE i000 WITH 'No Data found'(027).
    ENDIF.
    Removing the date limit to get the due items in the past
    DELETE int_bsid WHERE
    ( blart NE 'RE' AND blart NE 'KR' ) OR
    shkzg NE 'H'.
    SORT int_bsid BY kunnr.
    ENDFORM. " fetch_data
    *& Form header
    Display the Report Columns
    FORM header .
    v_tage1 = p_tage1 + 1.
    v_tage2 = p_tage2 + 1.
    v_tage3 = p_tage3 + 1.
    v_fidd = p_tage1.
    v_sedd = p_tage2.
    v_thdd = p_tage3.
    v_fodd = p_tage4.
    MOVE v_fodd0(4) TO v_fodd1(3).
    v_fodd+0(1) = space.
    CONCATENATE '1 to'(010) v_fidd INTO v_fir.
    CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
    CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
    CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
    Standard header
    clear: v_date1, v_str, v_str1, v_tage.
    write p_allgst to v_date1.
    Move p_tage4 to v_tage.
    concatenate '>' v_tage text-025 into v_str1.
    concatenate
    'Summary of Ageing Analysis for Customer Open Invoices as on'(013)
    v_date1 into v_str separated by space.
    CALL FUNCTION 'Z_STANDARD_HEADER'
    EXPORTING
    title1 = 'Saudi International Petrochemical Company'(012)
    title2 = v_str.
    FORMAT COLOR OFF.
    WRITE : /1(168) sy-uline.
    FORMAT COLOR 1 INTENSIFIED.
    WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
    50(101) 'Invoices Due For(In Days)'(014) CENTERED,
    151 sy-vline, 168 sy-vline .
    WRITE :/1 sy-vline, 2(11) 'Customer#'(015) CENTERED,
    13 sy-vline ,14(35) 'Customer Name'(016) CENTERED,
    49 sy-vline,
    50(101) sy-uline,151 sy-vline,
    152(16) 'Total'(017) CENTERED,
    168 sy-vline.
    WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
    50(16) v_fir CENTERED, 66 sy-vline,
    67(16) v_sec CENTERED, 83 sy-vline,
    84(16) v_thir CENTERED, 100 sy-vline,
    101(16) v_four CENTERED, 117 sy-vline,
    118(16) v_str1 centered, 134 sy-vline,
    135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
    168 sy-vline.
    FORMAT COLOR OFF.
    WRITE : /1(168) sy-uline.
    ENDFORM. " header
    *& Form basic_list
    Display the Basic List
    FORM basic_list .
    NEW-PAGE LINE-SIZE 168.
    LOOP AT int_bsid.
    CLEAR v_date.
    IF int_bsid-zbd3t <> ' '.
    v_date = int_bsid-zfbdt + int_bsid-zbd3t.
    ELSE.
    IF int_bsid-zbd2t <> ' '.
    v_date = int_bsid-zfbdt + int_bsid-zbd2t.
    ELSE.
    v_date = int_bsid-zfbdt + int_bsid-zbd1t.
    ENDIF.
    ENDIF.
    IF int_bsid-zbd1t = ' '.
    v_date = int_bsid-zfbdt.
    ENDIF.
    IF v_date IN r_date1.
    int_final-total1 = int_final-total1 + int_bsid-dmbtr.
    ELSEIF v_date IN r_date2.
    int_final-total2 = int_final-total2 + int_bsid-dmbtr.
    ELSEIF v_date IN r_date3.
    int_final-total3 = int_final-total3 + int_bsid-dmbtr.
    ELSEIF v_date IN r_date4.
    int_final-total4 = int_final-total4 + int_bsid-dmbtr.
    ELSEif v_date > r_date4-high.
    int_final-total5 = int_final-total5 + int_bsid-dmbtr.
    ELSEif v_date < p_allgst.
    int_final-total6 = int_final-total6 + int_bsid-dmbtr.
    ENDIF.
    AT END OF kunnr.
    v_flag = 1.
    ENDAT.
    IF v_flag = 1.
    int_final-kunnr = int_bsid-kunnr.
    int_final-name1 = int_bsid-name1.
    int_final-total = int_final-total1 + int_final-total2 +
    int_final-total3 + int_final-total4 + int_final-total5 +
    int_final-total6.
    APPEND int_final.
    v_gtotal1 = v_gtotal1 + int_final-total1.
    v_gtotal2 = v_gtotal2 + int_final-total2.
    v_gtotal3 = v_gtotal3 + int_final-total3.
    v_gtotal4 = v_gtotal4 + int_final-total4.
    v_gtotal5 = v_gtotal5 + int_final-total5.
    v_gtotal6 = v_gtotal6 + int_final-total6.
    v_gtotal = v_gtotal + int_final-total.
    WRITE: /1 sy-vline,
    2 int_final-kunnr COLOR 4 INTENSIFIED ON,
    13 sy-vline,
    14 int_final-name1 COLOR 4 INTENSIFIED ON,
    49 sy-vline.
    DATA : v_rem.
    v_rem = sy-tabix MOD 2.
    IF v_rem NE 0.
    FORMAT COLOR 2 INTENSIFIED.
    WRITE : 50 int_final-total1 CURRENCY int_bsid-waers,
    66 sy-vline,
    67 int_final-total2 CURRENCY int_bsid-waers,
    83 sy-vline,
    84 int_final-total3 CURRENCY int_bsid-waers,
    100 sy-vline,
    101 int_final-total4 CURRENCY int_bsid-waers,
    117 sy-vline,
    118 int_final-total5 CURRENCY int_bsid-waers,
    134 sy-vline,
    135 int_final-total6 CURRENCY int_bsid-waers,
    151 sy-vline,
    152 int_final-total CURRENCY int_bsid-waers,
    168 sy-vline.
    ELSE.
    WRITE : 50 int_final-total1 CURRENCY int_bsid-waers,
    66 sy-vline,
    67 int_final-total2 CURRENCY int_bsid-waers,
    83 sy-vline,
    84 int_final-total3 CURRENCY int_bsid-waers,
    100 sy-vline,
    101 int_final-total4 CURRENCY int_bsid-waers,
    117 sy-vline,
    118 int_final-total5 CURRENCY int_bsid-waers,
    134 sy-vline,
    135 int_final-total6 CURRENCY int_bsid-waers,
    151 sy-vline,
    152 int_final-total CURRENCY int_bsid-waers,
    168 sy-vline.
    ENDIF.
    FORMAT COLOR OFF.
    HIDE int_final.
    CLEAR int_final.
    v_flag = 0.
    ENDIF.
    AT LAST.
    WRITE : /1(168) sy-uline.
    FORMAT COLOR 3 INTENSIFIED.
    WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
    49 sy-vline, 50 v_gtotal1 CURRENCY int_bsid-waers,
    66 sy-vline, 67 v_gtotal2 CURRENCY int_bsid-waers,
    83 sy-vline, 84 v_gtotal3 CURRENCY int_bsid-waers,
    100 sy-vline,101 v_gtotal4 CURRENCY int_bsid-waers,
    117 sy-vline,118 v_gtotal5 CURRENCY int_bsid-waers,
    134 sy-vline,135 v_gtotal6 CURRENCY int_bsid-waers,
    151 sy-vline,152 v_gtotal CURRENCY int_bsid-waers,
    168 sy-vline.
    HIDE : v_gtotal1,
    v_gtotal2,
    v_gtotal3,
    v_gtotal4,
    v_gtotal5,
    v_gtotal6,
    v_gtotal.
    ENDAT.
    FORMAT COLOR OFF.
    ENDLOOP.
    WRITE : /1(168) sy-uline.
    ENDFORM. " basic_list
    *& Form line_selection
    When double clicked on the line display the seconday list
    FORM line_selection .
    NEW-PAGE LINE-SIZE 206.
    Sy-lsind = 1.
    DATA : v_rem,v_cnt LIKE sy-tabix.
    v_cnt = 0.
    SORT int_bsid BY belnr zfbdt.
    LOOP AT int_bsid WHERE kunnr EQ int_final-kunnr.
    v_rem = v_cnt MOD 2.
    CLEAR v_date.
    IF int_bsid-zbd3t <> ' '.
    v_date = int_bsid-zfbdt + int_bsid-zbd3t.
    ELSE.
    IF int_bsid-zbd2t <> ' '.
    v_date = int_bsid-zfbdt + int_bsid-zbd2t.
    ELSE.
    v_date = int_bsid-zfbdt + int_bsid-zbd1t.
    ENDIF.
    ENDIF.
    IF int_bsid-zbd1t = ' '.
    v_date = int_bsid-zfbdt.
    ENDIF.
    IF v_rem NE 0.
    format color 2 intensified.
    WRITE :/1 sy-vline, 2 int_bsid-belnr,
    12 sy-vline,13 int_bsid-kunnr,
    23 sy-vline,24 int_bsid-name1,
    59 sy-vline,60 int_bsid-xblnr,
    76 sy-vline,77 int_bsid-zfbdt,
    87 sy-vline.
    WRITE : 104 sy-vline,121 sy-vline,
    138 sy-vline,155 sy-vline,
    172 sy-vline, 189 sy-vline,
    190 int_bsid-dmbtr CURRENCY int_bsid-waers,
    206 sy-vline.
    IF v_date IN r_date1.
    v_subtotal1 = v_subtotal1 + int_bsid-dmbtr.
    WRITE : 88 int_bsid-dmbtr CURRENCY int_bsid-waers.
    ELSEIF v_date IN r_date2.
    v_subtotal2 = v_subtotal2 + int_bsid-dmbtr.
    WRITE : 105 int_bsid-dmbtr CURRENCY int_bsid-waers.
    ELSEIF v_date IN r_date3.
    v_subtotal3 = v_subtotal3 + int_bsid-dmbtr.
    WRITE : 122 int_bsid-dmbtr CURRENCY int_bsid-waers.
    ELSEIF v_date IN r_date4.
    v_subtotal4 = v_subtotal4 + int_bsid-dmbtr.
    WRITE : 139 int_bsid-dmbtr CURRENCY int_bsid-waers.
    ELSEif v_date > r_date4-high.
    v_subtotal5 = v_subtotal5 + int_bsid-dmbtr.
    WRITE : 156 int_bsid-dmbtr CURRENCY int_bsid-waers.
    ELSEif v_date < p_allgst.
    v_subtotal6 = v_subtotal6 + int_bsid-dmbtr.
    WRITE : 173 int_bsid-dmbtr CURRENCY int_bsid-waers.
    ENDIF.
    format color off.
    ELSE.
    WRITE :/1 sy-vline, 2 int_bsid-belnr,
    12 sy-vline,13 int_bsid-kunnr,
    23 sy-vline,24 int_bsid-name1,
    59 sy-vline,60 int_bsid-xblnr,
    76 sy-vline,77 int_bsid-zfbdt,
    87 sy-vline.
    WRITE : 104 sy-vline,121 sy-vline,
    138 sy-vline,155 sy-vline,
    172 sy-vline,189 sy-vline,
    190 int_bsid-dmbtr CURRENCY int_bsid-waers,
    206 sy-vline.
    IF v_date IN r_date1.
    v_subtotal1 = v_subtotal1 + int_bsid-dmbtr.
    WRITE : 88 int_bsid-dmbtr CURRENCY int_bsid-waers.
    ELSEIF v_date IN r_date2.
    v_subtotal2 = v_subtotal2 + int_bsid-dmbtr.
    WRITE : 105 int_bsid-dmbtr CURRENCY int_bsid-waers.
    ELSEIF v_date IN r_date3.
    v_subtotal3 = v_subtotal3 + int_bsid-dmbtr.
    WRITE : 122 int_bsid-dmbtr CURRENCY int_bsid-waers.
    ELSEIF v_date IN r_date4.
    v_subtotal4 = v_subtotal4 + int_bsid-dmbtr.
    WRITE : 139 int_bsid-dmbtr CURRENCY int_bsid-waers.
    ELSEif v_date > r_date4-high.
    v_subtotal5 = v_subtotal5 + int_bsid-dmbtr.
    WRITE : 156 int_bsid-dmbtr CURRENCY int_bsid-waers.
    ELSEif v_date < p_allgst.
    v_subtotal6 = v_subtotal6 + int_bsid-dmbtr.
    WRITE : 173 int_bsid-dmbtr CURRENCY int_bsid-waers.
    ENDIF.
    ENDIF.
    FORMAT COLOR OFF.
    v_cnt = v_cnt + 1.
    ENDLOOP.
    WRITE : /1(206) sy-uline.
    v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
    + v_subtotal4 + v_subtotal5 + v_subtotal6.
    FORMAT COLOR 3 INTENSIFIED.
    WRITE : /1 sy-vline,
    2(85) 'Total'(017) CENTERED CURRENCY int_bsid-waers ,
    87 sy-vline,
    88 v_subtotal1 CURRENCY int_bsid-waers,
    104 sy-vline,
    105 v_subtotal2 CURRENCY int_bsid-waers,
    121 sy-vline,
    122 v_subtotal3 CURRENCY int_bsid-waers,
    138 sy-vline,
    139 v_subtotal4 CURRENCY int_bsid-waers,
    155 sy-vline,
    156 v_subtotal5 CURRENCY int_bsid-waers,
    172 sy-vline,
    173 v_subtotal6 CURRENCY int_bsid-waers,
    189 sy-vline,
    190 v_subtotal CURRENCY int_bsid-waers,
    206 sy-vline.
    FORMAT COLOR OFF.
    WRITE : /1(206) sy-uline.
    CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
    v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
    v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
    ENDFORM. " line_selection
    *& Form header1
    Secondary List Header
    FORM header1 .
    Standard header
    clear: v_date1, v_str, v_str1, v_tage.
    write p_allgst to v_date1.
    Move p_tage4 to v_tage.
    concatenate '>' v_tage text-025 into v_str1.
    concatenate
    'Details of Ageing Analysis for Customer Open Invoices as on'(024)
    v_date1 into v_str separated by space.
    CALL FUNCTION 'Z_STANDARD_HEADER'
    EXPORTING
    title1 = 'Saudi International Petrochemical Company'(012)
    title2 = v_str.
    FORMAT COLOR 1 intensified.
    WRITE :/1(206) sy-uline.
    WRITE :/1 sy-vline,12 sy-vline ,
    23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
    88(101) 'Invoices Due For(In Days)'(014) CENTERED,
    189 sy-vline,206 sy-vline.
    WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
    12 sy-vline, 13(10) 'Customer#'(015) CENTERED,
    23 sy-vline, 24(35) 'Customer Name'(016) CENTERED,
    59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
    76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
    87 sy-vline, 88(101) sy-uline,
    189 sy-vline,190(16) 'Total'(017) CENTERED,
    206 sy-vline.
    WRITE : /1 sy-vline, 12 sy-vline,
    23 sy-vline,59 sy-vline,
    76 sy-vline,87 sy-vline,
    88(16) v_fir CENTERED, 104 sy-vline,
    105(16) v_sec CENTERED, 121 sy-vline,
    122(16) v_thir CENTERED, 138 sy-vline,
    139(16) v_four CENTERED, 155 sy-vline,
    156(16) v_str1 CENTERED,
    172 sy-vline,
    173(16) 'Already Overdue'(018) CENTERED,
    189 sy-vline,
    206 sy-vline.
    format color off.
    WRITE : /1(206) sy-uline.
    ENDFORM. " header1
    REPORT zfi_vendor_ageing
    NO STANDARD PAGE HEADING
    LINE-COUNT 58
    line-size 168
    MESSAGE-ID zh_msg.
    Report Name : Vendor Open Items Ageing Report
    Purpose : This report displays the Vendor Open Items based on
    different Ageing days (Calculated by taking the Base
    Line date and the days mentioned in Payment Terms)
    M O D I F I C A T I O N L O G
    Date | Change Number | Initials | Description
    30-Aug-2004 | DTSK900**** | Anji Reddy | Initial
    D A T A B A S E T A B L E S D E C L A R A T I O N
    TABLES: lfa1, " Vendor Master (General)
    t001, " Company Codes
    rfpdo.
    I N T E R N A L T A B L E S D E C L A R A T I O N S *
    Internal Table for Vendor Open Items Data
    DATA: BEGIN OF int_bsik OCCURS 0,
    lifnr LIKE bsik-lifnr, " Vendor Number
    name1 LIKE lfa1-name1, " Vendor Name
    shkzg LIKE bsik-shkzg, " Dr/Cr Indicator
    belnr LIKE bsik-belnr, " Document Number
    xblnr LIKE bsik-xblnr, " Ref Doc No
    blart LIKE bsik-blart, " Document Type
    zfbdt LIKE bsik-zfbdt, " Base Line Date
    zbd1t LIKE bsik-zbd1t, " Due date1
    zbd2t LIKE bsik-zbd2t, " Due Date2
    zbd3t LIKE bsik-zbd3t, " Due Date3
    waers LIKE bsik-waers, " Currency
    dmbtr LIKE bsik-dmbtr, " Amount in Local Curr
    END OF int_bsik.
    Internal Table for Amounts Sum Up Data
    DATA: BEGIN OF int_final OCCURS 0,
    lifnr LIKE bsik-lifnr, " Vendor Number
    name1 LIKE lfa1-name1, " Vendor Name
    total1 LIKE bsik-dmbtr, " Amount in Local Curr
    total2 LIKE bsik-dmbtr, " Amount in Local Curr
    total3 LIKE bsik-dmbtr, " Amount in Local Curr
    total4 LIKE bsik-dmbtr, " Amount in Local Curr
    total5 LIKE bsik-dmbtr, " Amount in Local Curr
    total6 LIKE bsik-dmbtr, " Amount in Local Curr
    total LIKE bsik-dmbtr, " Amount in Local Curr
    END OF int_final.
    D A T A D E C L A R A T I O N S
    DATA : v_flag, " Flag
    v_gtotal1 LIKE bsik-dmbtr, " Amount Totals
    v_gtotal2 LIKE bsik-dmbtr, " Amount Totals
    v_gtotal3 LIKE bsik-dmbtr, " Amount Totals
    v_gtotal4 LIKE bsik-dmbtr, " Amount Totals
    v_gtotal5 LIKE bsik-dmbtr, " Amount Totals
    v_gtotal6 LIKE bsik-dmbtr, " Amount Totals
    v_gtotal LIKE bsik-dmbtr, " Amount Totals
    v_subtotal1 LIKE bsik-dmbtr, " Amount Totals
    v_subtotal2 LIKE bsik-dmbtr, " Amount Totals
    v_subtotal3 LIKE bsik-dmbtr, " Amount Totals
    v_subtotal4 LIKE bsik-dmbtr, " Amount Totals
    v_subtotal5 LIKE bsik-dmbtr, " Amount Totals
    v_subtotal6 LIKE bsik-dmbtr, " Amount Totals
    v_subtotal LIKE bsik-dmbtr, " Amount Totals
    v_date LIKE bsik-zfbdt, " Due Date
    v_tage1(4), " Age 30 days
    v_tage2(4), " Age 60 days
    v_tage3(4), " Age 90 days
    v_fir(15), " Column Text1
    v_sec(15), " Column Text2
    v_thir(15), " Column Text3
    v_four(17), " Column Text4
    v_fidd(4), " Days field1
    v_sedd(4), " Days field2
    v_thdd(4), " Days field3
    v_fodd(4), " Days field4
    v_str TYPE SY-LISEL, " String
    v_str1(11), " String
    v_tage(3), " String
    v_date1(10). " Date field
    R A N G E D E C L A R A T I O N S
    RANGES: r_date1 FOR bsik-zfbdt, " Date Range 1
    r_date2 FOR bsik-zfbdt, " Date Range 2
    r_date3 FOR bsik-zfbdt, " Date Range 3
    r_date4 FOR bsik-zfbdt. " Date Range 4
    S E L E C T I O N S C R E E N *
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr. "Vendor account
    PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
    "Open items at key date
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
    PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
    p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
    p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
    p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
    SELECTION-SCREEN END OF BLOCK b3.
    A T S E L E C T I O N S C R E E N *
    AT SELECTION-SCREEN.
    Validate the screen fields
    PERFORM validate_flds.
    S T A R T O F S E L E C T I O N *
    START-OF-SELECTION.
    Fetch main data
    PERFORM fetch_data.
    T O P O F P A G E
    Header
    TOP-OF-PAGE.
    PERFORM header.
    E N D O F P A G E
    Footer
    END-OF-PAGE.
    ULINE.
    T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
    Top of Page in Secondary List
    TOP-OF-PAGE DURING LINE-SELECTION.
    PERFORM header1.
    A T L I N E S E L E C T I O N *
    AT LINE-SELECTION.
    Perform Line Selections
    PERFORM line_selection.
    E N D O F S E L E C T I O N
    END-OF-SELECTION.
    List generation
    PERFORM basic_list.
    *& Form validate_flds
    Validation of Selection Screen fields
    FORM validate_flds .
    Validate Vendor Code
    CLEAR lfa1-lifnr.
    SELECT lifnr UP TO 1 ROWS
    INTO lfa1-lifnr
    FROM lfa1
    WHERE lifnr IN s_lifnr AND
    spras = sy-langu.
    ENDSELECT.
    IF sy-subrc <> 0.
    MESSAGE e000 WITH 'Invalid Vendor Code range'(023).
    ENDIF.
    Validate Company Code
    CLEAR t001-bukrs.
    SELECT bukrs UP TO 1 ROWS
    INTO t001-bukrs
    FROM t001
    WHERE bukrs = p_bukrs AND
    spras = sy-langu.
    ENDSELECT.
    IF sy-subrc <> 0.
    MESSAGE e021. " Invalid Company Code range
    ENDIF.
    IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
    ( p_tage1 > p_tage4 ).
    MESSAGE e999 WITH 'Column 1 greater'(004)
    'than Column# 2 or 3 or 4'(005).
    ENDIF.
    *column 2
    IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
    MESSAGE e999 WITH 'Column 2 greater'(006)
    'than Column# 3 or 4'(007).
    ENDIF.
    *column3
    IF ( p_tage3 > p_tage4 ).
    MESSAGE e999 WITH 'Column 3 greater'(008)
    'than Column#4'(009).
    ENDIF.
    ENDFORM. " validate_flds
    *& Form fetch_data
    Fetching Data from Database Tables
    FORM fetch_data .
    Date Range Population
    r_date1-sign = 'I'.
    r_date1-option = 'BT'.
    r_date1-low = p_allgst.
    r_date1-high = r_date1-low + p_tage1.
    APPEND r_date1.
    r_date2-sign = 'I'.
    r_date2-option = 'BT'.
    r_date2-low = r_date1-high + 1.
    r_date2-high = r_date1-low + p_tage2.
    APPEND r_date2.
    r_date3-sign = 'I'.
    r_date3-option = 'BT'.
    r_date3-low = r_date2-high + 1.
    r_date3-high = r_date1-low + p_tage3.
    APPEND r_date3.
    r_date4-sign = 'I'.
    r_date4-option = 'BT'.
    r_date4-low = r_date3-high + 1.
    r_date4-high = r_date1-low + p_tage4.
    APPEND r_date4.
    Select the Vendor Open Items data from BSIK
    SELECT l~lifnr
    l1~name1
    b~waers
    b~dmbtr
    b~zfbdt
    b~zbd1t
    b~zbd2t
    b~zbd3t
    b~belnr
    b~xblnr
    b~shkzg
    b~blart
    INTO CORRESPONDING FIELDS OF TABLE int_bsik
    FROM lfb1 AS l INNER JOIN lfa1 AS l1
    ON llifnr = l1lifnr
    INNER JOIN bsik AS b
    ON llifnr = blifnr AND
    lbukrs = bbukrs
    WHERE l~lifnr IN s_lifnr AND
    l~bukrs = p_bukrs and
    b~zfbdt le p_allgst.
    IF SY-SUBRC <> 0.
    MESSAGE i000 WITH 'No Data found'(027).
    ENDIF.
    Removing the date limit to get the due items in the past
    DELETE int_bsik WHERE
    ( blart NE 'RE' AND blart NE 'KR' ) OR
    shkzg NE 'H'.
    SORT int_bsik BY lifnr.
    ENDFORM. " fetch_data
    *& Form header
    Display the Report Columns
    FORM header .
    v_tage1 = p_tage1 + 1.
    v_tage2 = p_tage2 + 1.
    v_tage3 = p_tage3 + 1.
    v_fidd = p_tage1.
    v_sedd = p_tage2.
    v_thdd = p_tage3.
    v_fodd = p_tage4.
    MOVE v_fodd0(4) TO v_fodd1(3).
    v_fodd+0(1) = space.
    CONCATENATE '1 to'(010) v_fidd INTO v_fir.
    CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
    CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
    CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
    Standard header
    clear: v_date1, v_str, v_str1, v_tage.
    write p_allgst to v_date1.
    Move p_tage4 to v_tage.
    concatenate '>' v_tage text-025 into v_str1.
    concatenate
    'Summary of Ageing Analysis for Vendor Open Invoices as on'(013)
    v_date1 into v_str separated by space.
    CALL FUNCTION 'Z_STANDARD_HEADER'
    EXPORTING
    title1 = 'Saudi International Petrochemical Company'(012)
    title2 = v_str.
    FORMAT COLOR OFF.
    WRITE : /1(168) sy-uline.
    FORMAT COLOR 1 INTENSIFIED.
    WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
    50(101) 'Invoices Due For(In Days)'(014) CENTERED,
    151 sy-vline, 168 sy-vline .
    WRITE :/1 sy-vline, 2(11) 'Vendor#'(015) CENTERED,
    13 sy-vline ,14(35) 'Vendor Name'(016) CENTERED,
    49 sy-vline,
    50(101) sy-uline,151 sy-vline,
    152(16) 'Total'(017) CENTERED,
    168 sy-vline.
    WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
    50(16) v_fir CENTERED, 66 sy-vline,
    67(16) v_sec CENTERED, 83 sy-vline,
    84(16) v_thir CENTERED, 100 sy-vline,
    101(16) v_four CENTERED, 117 sy-vline,
    118(16) v_str1 centered, 134 sy-vline,
    135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
    168 sy-vline.
    FORMAT COLOR OFF.
    WRITE : /1(168) sy-uline.
    ENDFORM. " header
    *& Form basic_list
    Display the Basic List
    FORM basic_list .
    NEW-PAGE LINE-SIZE 168.
    LOOP AT int_bsik.
    CLEAR v_date.
    IF int_bsik-zbd3t <> ' '.
    v_date = int_bsik-zfbdt + int_bsik-zbd3t.
    ELSE.
    IF int_bsik-zbd2t <> ' '.
    v_date = int_bsik-zfbdt + int_bsik-zbd2t.
    ELSE.
    v_date = int_bsik-zfbdt + int_bsik-zbd1t.
    ENDIF.
    ENDIF.
    IF int_bsik-zbd1t = ' '.
    v_date = int_bsik-zfbdt.
    ENDIF.
    IF v_date IN r_date1.
    int_final-total1 = int_final-total1 + int_bsik-dmbtr.
    ELSEIF v_date IN r_date2.
    int_final-total2 = int_final-total2 + int_bsik-dmbtr.
    ELSEIF v_date IN r_date3.
    int_final-total3 = int_final-total3 + int_bsik-dmbtr.
    ELSEIF v_date IN r_date4.
    int_final-total4 = int_final-total4 + int_bsik-dmbtr.
    ELSEif v_date > r_date4-high.
    int_final-total5 = int_final-total5 + int_bsik-dmbtr.
    ELSEif v_date < p_allgst.
    int_final-total6 = int_final-total6 + int_bsik-dmbtr.
    ENDIF.
    AT END OF lifnr.
    v_flag = 1.
    ENDAT.
    IF v_flag = 1.
    int_final-lifnr = int_bsik-lifnr.
    int_final-name1 = int_bsik-name1.
    int_final-total = int_final-total1 + int_final-total2 +
    int_final-total3 + int_final-total4 + int_final-total5 +
    int_final-total6.
    APPEND int_final.
    v_gtotal1 = v_gtotal1 + int_final-total1.
    v_gtotal2 = v_gtotal2 + int_final-total2.
    v_gtotal3 = v_gtotal3 + int_final-total3.
    v_gtotal4 = v_gtotal4 + int_final-total4.
    v_gtotal5 = v_gtotal5 + int_final-total5.
    v_gtotal6 = v_gtotal6 + int_final-total6.
    v_gtotal = v_gtotal + int_final-total.
    WRITE: /1 sy-vline,
    2 int_final-lifnr COLOR 4 INTENSIFIED ON,
    13 sy-vline,
    14 int_final-name1 COLOR 4 INTENSIFIED ON,
    49 sy-vline.
    DATA : v_rem.
    v_rem = sy-tabix MOD 2.
    IF v_rem NE 0.
    FORMAT COLOR 2 INTENSIFIED.
    WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
    66 sy-vline,
    67 int_final-total2 CURRENCY int_bsik-waers,
    83 sy-vline,
    84 int_final-total3 CURRENCY int_bsik-waers,
    100 sy-vline,
    101 int_final-total4 CURRENCY int_bsik-waers,
    117 sy-vline,
    118 int_final-total5 CURRENCY int_bsik-waers,
    134 sy-vline,
    135 int_final-total6 CURRENCY int_bsik-waers,
    151 sy-vline,
    152 int_final-total CURRENCY int_bsik-waers,
    168 sy-vline.
    ELSE.
    WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
    66 sy-vline,
    67 int_final-total2 CURRENCY int_bsik-waers,
    83 sy-vline,
    84 int_final-total3 CURRENCY int_bsik-waers,
    100 sy-vline,
    101 int_final-total4 CURRENCY int_bsik-waers,
    117 sy-vline,
    118 int_final-total5 CURRENCY int_bsik-waers,
    134 sy-vline,
    135 int_final-total6 CURRENCY int_bsik-waers,
    151 sy-vline,
    152 int_final-total CURRENCY int_bsik-waers,
    168 sy-vline.
    ENDIF.
    FORMAT COLOR OFF.
    HIDE int_final.
    CLEAR int_final.
    v_flag = 0.
    ENDIF.
    AT LAST.
    WRITE : /1(168) sy-uline.
    FORMAT COLOR 3 INTENSIFIED.
    WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
    49 sy-vline, 50 v_gtotal1 CURRENCY int_bsik-waers,
    66 sy-vline, 67 v_gtotal2 CURRENCY int_bsik-waers,
    83 sy-vline, 84 v_gtotal3 CURRENCY int_bsik-waers,
    100 sy-vline,101 v_gtotal4 CURRENCY int_bsik-waers,
    117 sy-vline,118 v_gtotal5 CURRENCY int_bsik-waers,
    134 sy-vline,135 v_gtotal6 CURRENCY int_bsik-waers,
    151 sy-vline,152 v_gtotal CURRENCY int_bsik-waers,
    168 sy-vline.
    HIDE : v_gtotal1,
    v_gtotal2,
    v_gtotal3,
    v_gtotal4,
    v_gtotal5,
    v_gtotal6,
    v_gtotal.
    ENDAT.
    FORMAT COLOR OFF.
    ENDLOOP.
    WRITE : /1(168) sy-uline.
    ENDFORM. " basic_list
    *& Form line_selection
    When double clicked on the line display the seconday list
    FORM line_selection .
    NEW-PAGE LINE-SIZE 206.
    Sy-lsind = 1.
    DATA : v_rem,v_cnt LIKE sy-tabix.
    v_cnt = 0.
    SORT int_bsik BY belnr zfbdt.
    LOOP AT int_bsik WHERE lifnr EQ int_final-lifnr.
    v_rem = v_cnt MOD 2.
    CLEAR v_date.
    IF int_bsik-zbd3t <> ' '.
    v_date = int_bsik-zfbdt + int_bsik-zbd3t.
    ELSE.
    IF int_bsik-zbd2t <> ' '.
    v_date = int_bsik-zfbdt + int_bsik-zbd2t.
    ELSE.
    v_date = int_bsik-zfbdt + int_bsik-zbd1t.
    ENDIF.
    ENDIF.
    IF int_bsik-zbd1t = ' '.
    v_date = int_bsik-zfbdt.
    ENDIF.
    IF v_rem NE 0.
    format color 2 intensified.
    WRITE :/1 sy-vline, 2 int_bsik-belnr,
    12 sy-vline,13 int_bsik-lifnr,
    23 sy-vline,24 int_bsik-name1,
    59 sy-vline,60 int_bsik-xblnr,
    76 sy-vline,77 int_bsik-zfbdt,
    87 sy-vline.
    WRITE : 104 sy-vline,121 sy-vline,
    138 sy-vline,155 sy-vline,
    172 sy-vline, 189 sy-vline,
    190 int_bsik-dmbtr CURRENCY int_bsik-waers,
    206 sy-vline.
    IF v_date IN r_date1.
    v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
    WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
    ELSEIF v_date IN r_date2.
    v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
    WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
    ELSEIF v_date IN r_date3.
    v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
    WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
    ELSEIF v_date IN r_date4.
    v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
    WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
    ELSEif v_date > r_date4-high.
    v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
    WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
    ELSEif v_date < p_allgst.
    v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
    WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
    ENDIF.
    format color off.
    ELSE.
    WRITE :/1 sy-vline, 2 int_bsik-belnr,
    12 sy-vline,13 int_bsik-lifnr,
    23 sy-vline,24 int_bsik-name1,
    59 sy-vline,60 int_bsik-xblnr,
    76 sy-vline,77 int_bsik-zfbdt,
    87 sy-vline.
    WRITE : 104 sy-vline,121 sy-vline,
    138 sy-vline,155 sy-vline,
    172 sy-vline,189 sy-vline,
    190 int_bsik-dmbtr CURRENCY int_bsik-waers,
    206 sy-vline.
    IF v_date IN r_date1.
    v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
    WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
    ELSEIF v_date IN r_date2.
    v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
    WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
    ELSEIF v_date IN r_date3.
    v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
    WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
    ELSEIF v_date IN r_date4.
    v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
    WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
    ELSEif v_date > r_date4-high.
    v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
    WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
    ELSEif v_date < p_allgst.
    v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
    WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
    ENDIF.
    ENDIF.
    FORMAT COLOR OFF.
    v_cnt = v_cnt + 1.
    ENDLOOP.
    WRITE : /1(206) sy-uline.
    v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
    + v_subtotal4 + v_subtotal5 + v_subtotal6.
    FORMAT COLOR 3 INTENSIFIED.
    WRITE : /1 sy-vline,
    2(85) 'Total'(017) CENTERED CURRENCY int_bsik-waers ,
    87 sy-vline,
    88 v_subtotal1 CURRENCY int_bsik-waers,
    104 sy-vline,
    105 v_subtotal2 CURRENCY int_bsik-waers,
    121 sy-vline,
    122 v_subtotal3 CURRENCY int_bsik-waers,
    138 sy-vline,
    139 v_subtotal4 CURRENCY int_bsik-waers,
    155 sy-vline,
    156 v_subtotal5 CURRENCY int_bsik-waers,
    172 sy-vline,
    173 v_subtotal6 CURRENCY int_bsik-waers,
    189 sy-vline,
    190 v_subtotal CURRENCY int_bsik-waers,
    206 sy-vline.
    FORMAT COLOR OFF.
    WRITE : /1(206) sy-uline.
    CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
    v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
    v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
    ENDFORM. " line_selection
    *& Form header1
    Secondary List Header
    FORM header1 .
    Standard header
    clear: v_date1, v_str, v_str1, v_tage.
    write p_allgst to v_date1.
    Move p_tage4 to v_tage.
    concatenate '>' v_tage text-025 into v_str1.
    concatenate
    'Details of Ageing Analysis for Vendor Open Invoices as on'(024)
    v_date1 into v_str separated by space.
    CALL FUNCTION 'Z_STANDARD_HEADER'
    EXPORTING
    title1 = 'Saudi International Petrochemical Company'(012)
    title2 = v_str.
    FORMAT COLOR 1 intensified.
    WRITE :/1(206) sy-uline.
    WRITE :/1 sy-vline,12 sy-vline ,
    23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
    88(101) 'Invoices Due For(In Days)'(014) CENTERED,
    189 sy-vline,206 sy-vline.
    WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
    12 sy-vline, 13(10) 'Vendor#'(015) CENTERED,
    23 sy-vline, 24(35) 'Vendor Name'(016) CENTERED,
    59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
    76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
    87 sy-vline, 88(101) sy-uline,
    189 sy-vline,190(16) 'Total'(017) CENTERED,
    206 sy-vline.
    WRITE : /1 sy-vline, 12 sy-vline,
    23 sy-vline,59 sy-vline,
    76 sy-vline,87 sy-vline,
    88(16) v_fir CENTERED, 104 sy-vline,
    105(16) v_sec CENTERED, 121 sy-vline,
    122(16) v_thir CENTERED, 138 sy-vline,
    139(16) v_four CENTERED, 155 sy-vline,
    156(16) v_str1 CENTERED,
    172 sy-vline,
    173(16) 'Already Overdue'(018) CENTERED,
    189 sy-vline,
    206 sy-vline.
    format color off.
    WRITE : /1(206) sy-uline.
    ENDFORM. " header1
    <b>The below link will give Tables & Relations.</b>
    http://www.erpgenie.com/abap/tables.htm
    http://goldenink.com/abap/files_in_sap.html
    http://abap4.tripod.com/SAP_Tables.html
    http://www.geocities.com/sapcircle/Relations.pdf
    Regards,
    Sree

  • Field & Table Name of ER1 Report

    Dear Experts ,
    I am working on customisation of ER1 report, I wanted to know the field names & table name of the below given data.
    DETAILS OF GOODS OF GOODS MFGD
    1.PRODUCT DESCRIPTION
    2.CETSH
    3.OPENING BALANCE
    4 QTY MFGD
    5.QTY RECVD
    6.CLOSING BALANCE
    7.ON WHICH DUTY IS PAID
    8.OTHERS W/O PAYMENT OF DUTY -FOR EXPORTS
    REMOVAL:
    1.PRODUCT DESCRIPTION
    2.QTY REMOVED
    3.ASSESABLE VALUE
    4.RATE OF DUTY (INCLUDING NOTIFICATION & RELEVANT SERIAL NO.)
    5.TOTAL DUTY PAYABLE
    6.TOTAL DUTY PAID
    DUTY PAYMENT DETAILS
    1.DATE OF PAYMENT
    2.MODE OF PAYMENT
    3.CENVAT
    4.SDE
    5.TOTALDUTY PAID
    Thanks
    DGN

    Got no solution

  • Field & Table for picking Block Qty

    Hi,
    Kindly provide details on how to pick up Blocked Quantity with material  document as reference
    From which Table & Field.

    Hi...
    MKPF:
    MJAHR -- Material Doc Number
    INSMK -- Stock Type (Check for Blocked Status)
    MENGE -- Quantity
    Thanks,
    Naveen Inuganti

  • How to force an agg table for a particular report?

    Hi,
    We have a report which shows duplicate records from the same table. we assume that this is because the report is hitting the fact table instead the agg table.
    Is there any way to force the report to hit the Agg table and not the fact?
    We have tried :
    1. content level tab option
    2. Number of elements in the dimensional hierarchy

    Hi,
    For eg, Consider three tables
    F_Sales_y (Summary at Year level)
    F_Sales_m (Summary at Month level)
    F_Sales (fact day level)
    Do the joins at physical layer, In BMM use the other two tables as source inside F_Sales.
    Set the cotent level for the summary facts F_Sales_y (year), F_Sales_m (month).
    now based on the dimension level the corresponding the bi server will choose the corresponding fact.
    Also check this post,
    http://obiee101.blogspot.com/2008/11/obiee-making-it-aggregate-aware.html
    Thanks,
    Vino

  • Technical/business system for non-SAP system

    Hi,
    I want to use a webservice from a non-SAP system.
    It is necessary to define a technical and business system in zhe sld for that non-SAP system?
    When yes, is this a standalone or a 3rd party system?
    Thanx

    I want to use a webservice from a non-SAP system.
    It is necessary to define a technical and business system in zhe sld for that non-SAP system?
    When yes, is this a standalone or a 3rd party system?
    you dont need to create Business system in Sld for 3rd party  just u need to create business component in id directly.
    please refer SCN for how to create Bus.component.

  • Automating a report for non-Crystal Reports users

    Post Author: dmdouglas
    CA Forum: Formula
    I using version 8.5. Several people I generate a specific report for would like to be able to run it themselves rather than ask me to run it for them. As they are not Crystal Report users, is there a command that will ask the user to input information that will be used to generate a report for a specific month when they run the report, rather than having to go into the select criteria to put in the date they want? For example, if they wanted a report for March, they would just have to answer a prompt like "What month?" and the program would put their response in a variable to calculate the period desired for the report.

    Post Author: V361
    CA Forum: Formula
    Not sure for 8.5, but in later release's you add a parameter, the parameter does the prompting "Sort of", then you set the select statement to use the parameter. Parameters will have ? as part of the field name.   ie...
    = { ?Date_Parameter}

Maybe you are looking for