Reporting one message-text for several errors

hy,
I have a table binded to context. The table hase several rows and columns. The user can edit the values in table-cells. Now I want to make a plausibility-check for all values in the table. And if there are for example 5 errors I want to mark the error-cells red. Therefore I wrote
msgMgr.reportContextAttributeMessage(
        element,
     attrinfo,
     IMessageZABComp.TEST,
     new Object[] ,
     false
for every error-field. My problem is that there are 5 error-messages shown in the message-area, but I want to show only one error-message "please correct your input !". How can I do this ? How can I put out only one message in the message-area, though there are several errors ?
Florian

hi florian ,
can you elaborate on the situation. if you define any message inside the message pool and display it using
Msgmngr.reportcontextattributeMessage(elemnt,attributeinfo,IMessage<compname>.test,new Object [] ,false) , it'll only display the error message with id 'test' only once. just check if you are writing this code inside a loop.
regards,
rahul.

Similar Messages

The operating system returned error 21(failed to retrieve text for this error. Reason: 15105

Hello everybody,
I have a huge database over windows 2003 server and sql server 2008 r2, all of them with all update, no firewall, no antivirus, no any server feature/role installed.
Over the last 2 months I suddently start getting the following error:
The operating system returned error 21(failed to retrieve text for this error. Reason: 15105) to SQL Server during a read at offset 0x000000000da000 in file 'S:\TempDB\tempdb.mdf'. Additional
messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB).
This error can be caused by many factors; for more information, see SQL Server Books Online.
I have the TEMP database split over 5 partitions on 5 different SAN disk. beggining size of each partition fix to 20 GB with autogrow 10%. Single Instance, around 15 DB.
The space on each hard disk does not reach 60%.
I got the above error when all temp files reach 27 GB approx.
I already ran a check disk, checkDB and everything says no error found, but I still got same error.
Does anyone know what could cause something like this?
note, when getting the above error, the only way to fix it, because I cannot do any select on any DB is to restart the service, so each temp file start again at 20 GB and everythign seems to be fine until reach the size again.
Gilberto H.

The operating system returned error 21(failed to retrieve text for this error. Reason: 15105
Hello Gilberto,
See System Error Codes (0-499) for error code 21:
ERROR_NOT_READY
21 (0x15)
The device is not ready.
Could be an issue with your storage system
Olaf Helper
[ Blog] [ Xing] [ MVP]

OS Error 665(failed to retrieve text for this error. Reason: 15105) while performing backup

Hi everyone,
I am performing a backup of sharepoint 2010 content database on my sql 2008 std edition which has file stream enabled and I experience the following problem.
When the backup reaches 40% (both when I do it via SSMS or via Maintenance plan) I get the following error:
BackupIoRequest::ReportIoError: write failure on backup device 'K:\SQL Backup\SP_Content2010.bak'. Operating system error 665(failed to retrieve text for this error. Reason: 15105).
Error: 18210, Severity: 16, State: 1.
I also tried backup the database on a different disk to make sure the problem is not there, but the same error appeared when the backup reached 40 %. I also executed DBCC CHECKDB against the database but it run successfully.
I could not find any other relevant source what the problem might be.
Any help will be very much appreciated.
Thanks

Hello,
Honestly it's going to come down to testing and root cause analysis. I don't have a single shot answer for you unfortunately.
I would start by doing the hotfix on that KB since you had OS Error 665 (again, you can run net helpmsg 665 to see the os error message). The SQL Server error 3041 (select * from sys.messages where message_id = 3041 and language_id = 1033) is "BACKUP failed
to complete the command %.*ls. Check the backup application log for detailed messages." Error 18210 is "%s: %s failure on backup device '%s'. Operating system error %s.". This points me back to the filesystem or storage.
Could you P->V the server during a maintenance window so you can test? The biggest thing here is that you don't have any valid backups so you're running the risk of losing data.
While not a method I use, you could stop SQL Server and filesystem copy the database and filestream share in the interim.
-Sean
Sean Gallardy | Blog |
Twitter

Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).

Hello
When I try to start the SQl server service i get the following error:
Event id 17058
Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).
As a test I have made sure the errorlog file ,and the entire drive it is, has everyone full control permissions, but to no avail. Does anyone have any ideas to resolve this issue?
Thank you

Hi,
Try running:
SELECT SERVERPROPERTY('ErrorLogFileName')
Then verify that the account being used to run the SQL Server service account has access to the path output above. If possible, you could try logging onto the server with the same account used to run SQL Server then navigate to the errorlog folder.
Thanks,
Andrew Bainbridge
SQL Server DBA
Please click "Propose As Answer" if a post solves your problem, or "Vote As Helpful" if a post has been useful to you

Using one packing instruction for several materials

Dear Friends,
I need some inputs on how to use one packing instruction for several materials.
The scenarion here is :
Many materials are packed in a similar way. If certain materials differ in only one characteristic (for example, construction), having to maintain a packing instruction for each of them results in a considerable time and efforts.
Need some valuable inputs to complete this requirement.
Regards,
Harsh

Hi.
Try with reference material for packing (MARA-RMATP). Same material number must be entered on all materials which are packed through same packing instructions.
Then you have to create/use access sequence for determination of packing instructions that contains that characteristic (RMATP).
Best regards
Milan

Changing message text for univariate discrepancies

Is it possible to edit the message text for univariate discrepancies? As per my knowledge, they are generated at the system level and programmers cannot change them. I was wondering if there is a workaround.
Thanks

Hi,
You could try going to Installation Codelists>> "Discrepancy Messages" and change the respective message for each of the univariate discrepancies(Data Type, DVG, Length ...etc).
Note: Installation codelists control Oracle Clinical behavior installation-wide; that is, across an installation of multiple Oracle Clinical databases, so tread wisely after due consultation with your department.
Regards,
Naveen

IW32: Error getting message (Text for order header not maintain in lang.EN

Hello All,
We just starting getting this message in IW32 and IW33 stating (Text for order header not maintained in language EN) then all the pre-existing description test disappeared.
We have not done any configuration change in this particular system.
Can anyone help to resolve this.
Thanks

Hi,
As with most SAP messages it is always a good idea to trust what it is saying.
The system is telling you that KG has not been created in the English language.
Go to transaction CUNI to check the settings.
Select the Unit of measure for "MASS" (from the drop down list) and check the entries for UOMs.
KG should be there and should have an English description (the message said it was not there for EN)
If it is there and set up correctly then there might have been something else in the UOM field? You didn't enter " KG" did you (a blank character then KG?)
Steve B

How to show the message text for constraint violations

Hi all,
In a batch procedure a primary key is violated (ORA-00001). For the primary key, a message is recorded in the TAPI and the message table.
How to show the enduser a proper message text instead of the ORA-00001.
We are using Designer 6 with Headstart 2.1.2.
Thanks in advance,
Joep

Joep,
If you try to insert the record by calling the ins procedure of the Table API, you will see that it will result in an ORA-20998 message, which means that the error message details reside in the CG$ERRORS plsql message table. These messages can be extracted e.g. with the messages.sql script, shipped with headstart.
If you do not want to rewrite your direct DML (insert into [table name] ...) in the complexer calls to the TAPI services, you might want to user VAPI's for it. In fact, this is one of the major advantages of using VAPI's.
The CDM guidelines volume, chapter 6 states that:
The front end no longer needs to trap declarative constraint
errors (Primary Key, Unique Key, Not Null and Check
Constraint violations) and replace them with a user-friendly
error. The View API issues DML statements through the TAPI
and the TAPI traps all declarative constraint errors, and puts
user-friendly message on the stack, in the preferred language of
the user! Fore more information, see the section, Completeness
of Rule Violations Reported in Front End, in this chapter.
So the only thing you need to do is generate VAPI's, and trap the ORA-20998 message (qms$errors.qms$exception) in an exception handler, where you retrieve the user friendly messages from the message stack!!
Regards, Marc

ADF: Cannot find reason for SEVERE error in WLS log

JDeveloper 11.1.1.1.0
When I deploy my ADF application to integrated WLS, I keep geting following log messages:
10.7.2009 9:09:17 oracle.adfinternal.view.faces.renderkit.rich.RichRenderKit isNavigating
SEVERE: The original view root was not set.
10.7.2009 9:09:20 oracle.adfinternal.view.faces.renderkit.rich.RichRenderKit isNavigating
SEVERE: The original view root was not set.
10.7.2009 9:11:04 oracle.adfinternal.view.faces.renderkit.rich.RichRenderKit isNavigating
SEVERE: The original view root was not set.
10.7.2009 9:11:09 oracle.adfinternal.view.faces.renderkit.rich.RichRenderKit isNavigating
SEVERE: The original view root was not set.
What is the problem?
Edited by: mskarabo on Jul 10, 2009 9:34 AM

Hi,
another situation when this could happen:
In my main jspx I have an af:panelTabbed with an af:region in each of the af:showDetailItems. The regions refer to bounded task flows consisting of only one view (a page fragment) using bindings. The jspx is below, with two additional showDetailItems for testing (sdi3, sdi4).
<f:view>
<af:document id="d1" title="TEST RichRenderKit isNavigating SEVERE error">
 <af:form id="f1">
 <af:panelTabbed id="pt1">
 <af:showDetailItem text="TaskFlow1" id="sdi1">
 <af:region value="#{bindings.MyTaskFlow1.regionModel}" id="r1"/>
 </af:showDetailItem>
 <af:showDetailItem text="TaskFlow2" id="sdi2">
 <af:region value="#{bindings.MyTaskFlow2.regionModel}" id="r2"/>
 </af:showDetailItem>
 <af:showDetailItem text="showDetailItem 1" id="sdi3">
 <af:outputText id="ot1" value="test"/>
 </af:showDetailItem>
 <af:showDetailItem text="showDetailItem 2" id="sdi4"/>
 </af:panelTabbed>
 </af:form>
</af:document>
</f:view>The error message appears in the log window only when navigating from a tab that uses a task flow as a region.
(E.g. the error shows when navigating from sdi1 or sdi2 to any other tab, but does not show when navigating from sdi3 or sdi4 to any other tab.)
Hope this helps to identify the problem.
Regards,
Patrik

Changing message text for short dumps

Hi, we have users running open transactions and finally core dumps with message:
TSV_TNEW_PAGE_ALLOC_FAILED
Short text
    No more storage space available for extending an internal table.
What happened?
    You attempted to extend an internal table, but the required space was
    not available.
Is there a way to customize the message a bit to give more helpful information?
Thanks,
Jonathan.

Jonathan,
I am not an expert in BASIS, so I cannot say if it is possible to change the texts for these messages. I am a bit surprised that you think " No more storage space available for extending an internal table" is not adequate. In addition, I am a more than a bit surprised that you are implicitly expecting to get dumps, so much so that you want to make the messages more user-friendly.
Runtime errors are not a tool to remind users that they have performed an impermissable activity. When a dump occurs, you pray that SAP will properly roll back all data to a consistant, pre-error state. I assure you, that this will not always happen in a complex environment. A runtime error is normally considered a very serious event. In most companies, it is the goal to never have a runtime error, and someone is usually charged with running these down and eliminating them. And that 'someone' is not a user.
Anyhow, you might want to try one of the many ABAP forums, one of the experts there may be able to assist you in changing these texts.
Sorry I couldn't be of more assistance,
DB49

ATP - One Checking group for several checking rules (Trans. OPJJ)

Hello,
In my system, each control group is associated to several checking rules. So, I don't understand how the system choose the right rule to use.
IIs it normal use ? SAP Documentation and forum threads seems to speak always about one checking rule for one checking group.
Thanks for your help,
Emmanuel
Edited by: Kholargol on Oct 2, 2009 11:19 AM

Emmanuel,
Just to add to what Prasobh explained on how to use different check rule 01/02 at production order level there are other checking rules that apply to SD module which is more important for defining ATP stratgey for various finished products.
So a simple sales oder for made to stock product may have checking rule A that considers existing unrestricted stock, purchase orders, production orders dates to promise against.
However a MTO sale order for made to order(MTO) product may have a check rule AE that should consider only the relevant production order and /or replenshipment lead time to promise against.
So while checking group set at material master needs many check rules specific to various Sale orders, production orders, plant mainteneance orders, or project orders.
Hope this helps in your understanding of this concept.
Thanks,
Ram

Report showing independent requirements for several materials

Hi
Workiing in SAP 4.7
Looking for a report where I can see independent requirements over time, for several materials, based on a time characteristic such as month/week. So for example I want to see the independent requirements for 10 different materials in a list, with the time characteristic on the horizontal axis.
Is there any such report? I am NOT asking for MD05/MD06/MD61/MD62.
Thanks in advance,
Lars
Edited by: Lars Tornblom on Apr 27, 2011 10:09 AM

Check in MD73
if you are using requirement plan then check based on requirement plan else check based on MRP controller by giving period

Using one Message Interface for all mappings

Hi Folks,
I am using a BPM in which i m getting a file from file system which have system ID in it.
I am having three send Synchronous step following that.
What i need is to use the Message interface for file to be used for receiver determination based on system id in case of Synchronous interfaces.
DO i need to include this File msg. interface in each mapping, if i do so will it be possible to send req. and get response for synchronous call.
OR is there any way to to use the file msg. interface for each mapping.
we are on SP17,I also tried Extended mapping but i am having SYNCHRONOUS send steps.
Plz help me out
Sachin

Bhavesh
1. You receiver a file in your BPM . This has a field called SYSTEM ID?
2. On the basis of the System ID field you need to determine the Receiver to which the Synchronous Request message has to be sent?
Sorry for that...because I was confused with jai's ans.. that's why said like that
You are absolutely correct
This is what i want to do.
i can't use switch step here. my BPM looks like this
RecFile->sync send->transformation1->transformation2->sync send2->transformation3->BLOCK
in BLOCK
Sync Send3->transformation4 and so on...
I am using three different Sync ABS Interface for each Sync send steps.
In receiver determination i want to get the data from respective R/3 system based on system ID i.e. logical system in File MI.
Say if it T90CLNT90 then get data from BS_SAPR3_4.6 else from BS_4.7
Sachin
Message was edited by:
Sachin Dhingra

Display a warning message (text) for document up/download in cFolders

Hello,
We are working in the development system of cProjects Suite 3.1 on the cFolders application. Lets say there is a collaboration which contains a folder which in turn contains a document. On clicking the document name the document details are displayed. Under the window "Current
Version" the following text message is displayed:
"To display the file of the current version, click the hyperlink. To edit the file of the current version, choose "Checkout" if you want to change it online, or download if you want to change it locally"
We want to change the message text as follows:
"To display the file of the current version, click the hyperlink. To edit the file of the current version, choose Checkout. Using the "Upload" button will result in overwriting the latest version"
Kindly suggest the means to achieve this.
Best Regards
Deepak Umrankar

if the doc is checked out
Then
   it will use this OTR text
   CFX_UI/INFO_DOC_DE_CONTINUE_EDIT_APP
ELSE
   CFX_UI/INFO_DOC_DE_EDIT_APP

One trip number for several trips

We want to use travel management to pay the mileage to our customer engineers who visit customer sites daily. We need to input only date, time and miles covered. I tried to use travel calendar for that but the only problem is that each line (for a day) is assigned a separate trip number while we want ONE trip number for like 20 days data. Is it possible.

Hi
In travel calander it will create seperate trips for each day.If you wish to create only one trip no. against various trips you may create direct in TRIP /PR05 transaction, with the range of start date and end date of your trip.
Then add Mileage additional receipt for each day, it will create single trip against all your receipts.
cheers
Mukta

Reporting one message-text for several errors

Similar Messages

Maybe you are looking for