Reports in Favorite Reports did not run when open

In SCOM 2012, I have run a few reports with the report template in the default SCOM management pack and saved them in the Favorite Report. When I open the saved reports at the Favorite Report again, they suppose to be run automatically. However, when I open
the report, it stopped at the parameters page and I need to click the run button explicitly. Does any one know why it is so and how can I make it run automatically when I open the reports which I have saved in the Favorite Report.
Thanks a lot for any advice. 
 

Thanks a lot for your comment. 
First of all, there is no error at all and no message in the event log that related to this issue. The report saved in Favorite Reports did able to run successfully without any error just only I need to click the run button manually. Suppose it should run
automatically, right?
Second, there actually two MS (say MS01 and MS02) and both of them point to the same SSRS. Say for example, the report saved in the Favorite Reports at the Operation console on MS01 will not run automatically when open it. The behavior is the same when using
the Operation console on MS02 to open that particular report saved on MS01. 
However, when I save a report in the Favorite Reports at the Operation console on MS02, it will run automatically when I reopen it. Then I use the Operation console on MS01 to reopen this report, it will run automatically as expected.
In short, report saved in MS01 got problem no matter where you open it. Report saved in MS02 got no problem no matter where you open it. It is very weird and I don't know what setting in SCOM 2012 would affect this behavior. In a big head right now...

Similar Messages

  • I bought the program did not work when open the program gives me this messageDisk Doctors Data Recovery

    Error You do not have permission to open drive /dev/rdisk0s2, Please select another drive or try running the Application as Root

    Are you trying to use the Disk Doctor app?
    Why do you want to run the app?
    Are you having a computer problem?
    What OSX version?

  • Schedule report re-runs when opening

    Hi,
    I have a scheduled discover report in Discoverer 4.1.48 version, when opening that scheduled report its re-run the query again.
    Please let me know, the reason.
    BR,
    Uma

    Hi Uma
    One of the reasons for this happening is that the query could be a fan trap. Discoverer will nearly always tell you that the results are invalid and suggest a rerun when there is a fan trap.
    This was recognised as a bug but was only corrected in the 10.1.2.2 release of Discoverer. Many other scheduling bugs were fixed in this and subsequent releases. Have you considered upgrading?
    Best wishes
    Michael

  • RT does not run when deployed to 9642 sbRIO LV 2011

    I have code deployed to a Ni sbRIO9642 where the RT code does not run when deployed to the when using LabVIEW 2011. It appears the NI-RT.ini file on the target is not being properly configured. I manually configured the ini file using FTP and the RT still will not run. I built a small test application and the RT on that did not run either, although i had hard validatiuon that the FPGA code was indeed running. Thanks - Keith

    Hey Martin, 
    I don't know if this specific problem was resolved, but there was a known issue in LabVIEW Real-Time 2011 (sp1) that exhibited this behavior. 
    Shared Variables
    292012
    Return
    Real-Time Applications containing typedef Shared Variables fail to run.
    If you are building an RTEXE that contains Shared Variables whose data type is based upon a type definition and the build specification is configured to disconnect type definitions the RTEXE will not run.
    Workaround: 1.) Manually disconnect the variable from the typedef before building the application 2.) Change the build spec so it doesn't disconnect type definitions
    Reported Version: 2011 32-bit
    Resolved Version: 2012
    Added: 10/11/2011
    Although this has been fixed in 2012, and shouldn't be an issue for you developing in LabVIEW 2012. Have you tried implementing a heartbeat VI? to verify if your RT app is actually running and not communicating? (great example here)
    Do you have the system state pushier installed on your cRIO? does it point to a memory leak or 100% CPU utilization? (steps to install it found here, if you're not familiar)
    Are you using the cRIO in Scan Interface mode? or in the FPGA interface? 
    Applications Engineer
    National Instruments
    CLD Certified

  • My firefox is not running- when i try to open it their appears.. "The exception unknown software exception (0xc0000417) occurred in the application at location

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/942433]]</blockquote>
    my firefox is not running… when i try to open it their appears.. “The exception unknown software exception (0xc0000417) occurred in the application at location 0x78b2ae6e” ..what can i do..????
    REPLY

    If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter
    If you can't open Firefox then see:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
    See also:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes
    Try a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
    *C:\Program Files\Mozilla Firefox\
    *http://kb.mozillazine.org/Installation_directory
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 17.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • I made a purchase in an app.  The app closed and I assumed that the purchase did not go through because it did not appear when I reopened the app, so I "re-purchased it".  I was charged twice, but only received it once.  What can I do?

    I made a purchase in an app.  The app closed and I assumed that the purchase did not go through because it did not appear when I reopened the app, so I "re-purchased it".  I was charged twice, but only received it once.  What can I do?

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: [email protected]
    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    iTunes Purchase Problems: How to Report a Problem to iTunes Support
    http://tinyurl.com/7tscpa7
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
     Cheers, Tom

  • I have an Intel Core I7 iMac with an SSD. Does TRIM run on SSDs on iMacs? I was recently told it did not run on OSX, which is a bit alarming.

    I have an Intel Core I7 iMac with an SSD. Does TRIM run on SSDs on iMacs? I was recently told it did not run  under OSX, which is a bit alarming.

    TRIM is supported on Apple-branded SSDs, but not third-party aftermarked SSDs.
    Go to "About this Mac" > More Info > System Report > Serial-ATA > Trim Support

  • Landed Cost manager Program is scheduled to run everyday but it did not run

    Hi All,
    Landed Cost manager Program is scheduled to run everyday but it did not run for 2 days and there was no error; it did not start even though it is a scheduled prog to run every 30 mins.
    Please let me know if anyone has experienced similar cases before; also let me know if you have any clue for above? I am also researching on if there is any way to send notifications when a scheduled prog did not run even.
    Any suggestions are welcome and also would like to get your thoughts on notification part if this is possible to track.
    Thanks
    De

    1006390 wrote:
    Hi All,
    Landed Cost manager Program is scheduled to run everyday but it did not run for 2 days and there was no error; it did not start even though it is a scheduled prog to run every 30 mins.
    Please let me know if anyone has experienced similar cases before; also let me know if you have any clue for above? I am also researching on if there is any way to send notifications when a scheduled prog did not run even.What if you submit the request manually, does it work?
    Assuming no error can be found in the DB/CM log files, have you verified the scheduled settings for this program? Try to schedule it again and see if this helps.
    Any suggestions are welcome and also would like to get your thoughts on notification part if this is possible to track.
    http://docs.oracle.com/cd/E18727_01/doc.121/e12951/toc.htm
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Notify+AND+Concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

  • I keep getting " server did not reply " when sending picture in email from iPhoto ?

    MAC/ Yosemite / Iphoto :  I keep getting " server did not reply " when trying to send picture using the email function in iPhoto ?

    in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
    OR
    IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
    LN

  • I just wonder why agent scheduler did not run during SAT and SUN?

    Hi guru,
    I just set agent scheduler to run on daily mode but past 2 days which are Saturday and Sunday. It did NOT run. I just see that there is a Weekly mode to check from Monday to Sunday so meaning that I need to use Weekly mode instead, isn't it?? There is no explanation in product manual as well. Someone please help me for this case. Thank you so much in advance.
    Best regards,
    JN

    Hi,
    For me the same is working fine with option daily mode.
    Please cross check the following things .
    Did you selected any active period ?
    Didi you selected any thing other than None execute once in execution cycle tab ?
    Rathish A M

  • Rule set import - Background job did not run

    Hi,
    I am setting up my CC 5.2 production system. I have downloaded from ruleset from the dev CC and imported it into production. However the background job generated did not run. I am implementing SAP note 999785 to fix this, but am wondering what should I do about the rule set? Do I need to delete the rule set and reimport it? As this background job did not run I notice that the permission rules did not generate.
    Any advice is welcome.
    Thanks

    Hi,
    as the backgorund job never ran and no rules were created, I can just reimport the ruleset and let the job run. I have tried this and the rules were created successfully

  • Hi i just wanna ask about the volume down button in the ipad 2 ,it was mute the device when hold it at once but before 2days i noticed that the device did not mute when i hold it ,why? and how i fix this by the way it is still volume down

    hi i just wanna ask about the volume down button in the ipad 2 ,it was mute the device when hold it at once but before 2days i noticed that the device did not mute when i hold it ,why? and how i fix this by the way it is still volume down

    Have you tried restarting or rebooting the iPad and then see if the volume control will work again?
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • InfoPath 2010 - Multiple Selection List Box - Rule Does Not Run When Unchecking Value

    I have a multiple selection list box on a form. I have a rule that sets the value of another field. There is not condition. Just any time item is checked or unchecked the value of the other field should
    change. This works when checking an item in the list box but not when unchecking the item in the list box. My question is - do rules not fire for a multiple selection list box when unchecking an item?

    Hi,
    I have tested in my lab environment, the rules seemed only fire for the latest checking action, and it did not fire when uncheck multiple-selection list box. Here is a workaround for your reference:
    http://www.infopathdev.com/forums/p/17850/62269.aspx
    However, I’d recommend you use check box instead, since it is much easier to set rule according to value of it. We can set it as true when we check the box, and set it as false when we uncheck it as below:
    Then it is simple and clear to make rule according to the value of check box.
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
    or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • In my iphone 4, wifi is connected but internet is not running. when i usd safari and other internet application it alwasys says wifi is not connected. why ? what happen to my iphone?

    in my iphone 4, wifi is connected but internet is not running. when i usd safari and other internet application it alwasys says wifi is not connected. why ? what happen to my iphone?

    Try Settings > General > Reset > Reset network connections.
    Other basic troubleshooting from the User's Guide is reset, restart, and restore.

  • CRON did not run, how do I check ?

    I defined the cron jobs :
    crontab -e
    01 14 * * * /bin/sh /mydir/disk_mon.sh
    01 14 * * * echo 123 >> /mydir/a.txt
    these can be seen by crontab -l
    But obviously the cron did not run.
    log in as root, i'm able to see the crond service is running.
    There is no /ect/cron.allow file
    the /etc/cron.deny is empty
    What eles I can check?
    Thanks

    it was typo. i do not have /etc/cron.allow
    OS infor:
    uname -a
    Linux adcdak05 2.6.18-164.0.0.0.1.el5 #1 SMP Thu Sep 3 00:21:28 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
    # cat /etc/pam.d/crond
    # The PAM configuration file for the cron daemon
    auth sufficient pam_rootok.so
    auth required pam_env.so
    auth include system-auth
    account required pam_access.so
    account include system-auth
    session required pam_loginuid.so
    session include system-auth
    alll lines are commented out in /etc/security/access.conf
    Please help. thx

Maybe you are looking for