Request of all participants

Friends,
There have been many very productive exchanges on this forum, and we
(moderators) are very happy with the dialog. We hope that the
subscribers are also satisfied.
I do have one request though. The intent of this forum is to
provide "complete" coverage of the issues raised by iMT/JATO
developers. To this end, I would request that if a subscriber
submits a question and the moderators reply with a recommendation,
that the original poster follow up with a status. There are quite a
few threads that currently end with a recommendation from the
moderators, but no follow up status from the original poster.
It would benefit all of the participants and the moderators to know
if a given suggestion provided a complete solution to the original
problem. If it did not provide a solution, the moderators would like
to see the discussion continue until a solution is devised. If it did
provide a solution, then please let everyone know so that we can
close the book on that subject and confidently refer other
subscribers to that solution.
Thank you for your assistance in making this a successful venture for
all of us.

Well the warranty is now updated to active for one year. The original warranty was ( SDF 3EZ) 3 years but they changed it.
this was the original:Description:
This product has a three year limited warranty and is entitled to IBM EZServ service. Customers may call their local service center for more information. Dealers may provide carry-in repair for this product. Batteries have a one year warranty.
This is the new: Status:Expiration date:Location: In warranty 2009-05-08 UNITED STATES
Warranty service upgrades and maintenance services
Description: This product has a one year limited warranty and is entitled to IBM EZServ service. Customers may call their local service center for more information. Dealers may provide carry-in repair for this product.

Similar Messages

Learning Solution - Need to send a reminder e-mail to all participants

I need to be able to send a reminder e-mail to all participants in a course. I would like the e-mail to be sent to the participants 7 days prior to the start date of the course.
We currently use SMARTFORMS to send an e-mail to a participant when he is booked into a course. We would like to send the same e-mail to the participant 7 days prior to the start of the course as a reminder.
Would I accomplish this using a workflow? Does anyone know a function that could be used to send the same e-mail again? We have not been able to find the code to send the e-mail to the participant again.

Hii Karen,
We are also facing the same problem, but with the same i also want to know that how to send an e-mail to a participant when he is booked into a course coz for me its not working.
Could you please tell me the steps to follow.
Thanks & Regards,
Nidhi

How can I add a person to an event (and send that person an invite) without resending the meeting invitation to all participants?

How can I add a person to an event (and send that person an invite) without resending the meeting invitation to all participants?

Apple doesn't make it easy to do what you want. However, here's how I do it.
Select the photo you want to move and create a new Event for it via the Event ➙ Create Event menu option.
In the Event mode select the new Event with the one picture and drag it onto the Event you want to move the photo to.

List of all participants in all workflows

I need to get a list of all participants in all workflows in my entire site collection.
How can I do this through a powershell script?
All I've found so far is this SQL command.
SELECT dirname, leafname FROM allDocs WHERE LeafName LIKE '%.xoml'
but this doesn't give me the name of the participants in each workflow.
Please help! thanks!!

Yeah, I thought you might.
It's not going to happen. The complexity is huge. Look at emails alone, you'd have to loop through all workflows, find out if there are any email activities in it and then identify if there are any users in that. You'd then have to check for any item that's
had that workflow run on it, work out what that user property might have been at the time, then identify the user on that basis.
Oh and you'll have to check every single version of the workflows that's been used in the past.
If you're doing a much simpler task and only worrying about a few workflows then it might be possible but I wouldn't touch that with a bargepole.

I don't get pictures from all participants in a shared album.

I don't get pictures from all participants in a shared album.
Is it possible to reset the album without deleting it? I'm the creator of the shared album.

As far as I know there is no option to reset without deleting, but check it out for yourself.
iCloud Photo Sharing FAQ - Apple Support

Office jet Pro K8600 will print my original 13 x 19 request, but all subsequent requests just cycle

Office jet Pro K8600 will print my original 13 x 19 request, but all subsequent requests just cycle through and not print. The printer will say it is out of paper but even when I reload it just keeps cycling the paper through without printing.

Office jet Pro K8600 will print my original 13 x 19 request, but all subsequent requests just cycle through and not print. The printer will say it is out of paper but even when I reload it just keeps cycling the paper through without printing.

Request To all

Dear All
This is an gental request to all Please close your question in forum if your question is resolved.
If it is resolved by yourselves please mention the answer how you have resolved the question sothat it will help to others if they face same problem.
Regards
Makarand Gurjar

There are large format printers, typically for commercial use. Not sure what your specific query is related to ink?
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

I lost my Ipad 5 and requested delete all from find my phone, fortunately they found it and as soon as I activated deleted itshelf as expected, how do I start it again ?

I lost my Ipad 5 and requested delete all from find my phone, they found it and as soon as I activated deleted itshelf as expected, how do I start it again ?

The iPad should be asking you for the Apple ID and Password when you turn it on.

How to calculate the size each PSA request or all PSA for the Datasources?

Hi All,
Can anybody tell me how to calculate the size of each PSA Request or all PSA's requests for all datasources?
Regards,
Rajesh

Hi ,
PSA technical name can be found as,
1)Right click on your Data Target,go to Display dataflow,click on the PSA ,here you can find the technical name.
2)Goto RSRV tcode>PSA Table>Consistency between PSA Partitions and SAP Administration-->Give your Infosoure name,it gives u PSA technical name also,
Thanks&Regards,
Praveena.

Transport Request in All client

Dear All,
In my Quality server there are 4 client (630, 650, 670, 690). When i transport any customized request from DEV to QLT, then in each client I have to transport it. It means i have to do same activity for 4 times. So is there any way by which I can transport the request in all client at same time? How?
Regards,
Nisit

Hi Nisit,
Try scehduling a Background Job (TMS_BCI_START_SERVICE), which run at the same time in all the clients.
Thanks
Ahamed

Please tell me what can I do to stop receiving lots of emails with all participants answers.

Please tello me what can I do to stop receiving lots of emails with all participants answers.

Click on Your Stuff in the upper right part of this site and then click on preferences. In the next window - click on Email Notifications. You can read all of the options and make your changes there - when fininished - click on Save at the bottom of the window.

Please help me! What can I do to stop receiving lots and lots of emails with all participants questions. I tried what was sugested but it didn't work!

Please help me! What can I do to stop receiving lots and lots of emails with all participants questions? I tried what was suggested but it didn't work.

You got your answers in this thread here and you marked it as correct.
https://discussions.apple.com/message/16541734#16541734
When you get to the email preferences page to make the changes, did you click on "Save" at the bottom of that page to lock in the changes that you made?

List of all participants to a specific role using PAPI

Hi,
Is there a way, we can get the list of all participants with a specific role using PAPI.

Satarama,
Yes, it's possible to get a list of participants in a Role using PAPI. If you're doing this within a project (i.e. not from an external PAPI client), you can use the out-of-box catalog component Fuego.Lib.Role. Using Java syntax, it will look something like this:
Role theRole = Role.find(name: roleName);
Participant[] participantList = theRole.participants;If you're doing this from an external client, you'll find similar functionality in the class DirOrganizationalRole. In Studio, you can find this and related classes in the package Fuego.Fdi.*.
Greg

Request to ALL nodes

Hi,
          I need to let all nodes know some thing, sort of like topic in MOM. So,
          instead of routing the requests to one of the nodes, I need the cluster to
          "broadcast" the request to all and don't care about the return. How would I
          do that, other than topic in MOM?
          TIA,
          Bill


Are you using any OS level clusterware software installed which you might have missed as the OS is normally handled by a different team in production environments.

Getting "Could not complete your request" error all the time

Whenever I try to do anything in Fireworks CS6 (CC desktop version) I get the error message "Could not complete your request. An error occurred". The only exception is when I try to preview an image I get "Could not render the database. An error occurred"
This literally happens with any action, from opening a file to changing any attribute of an object (e.g. colour, position, size). Try to draw a new object - same error. Delete one - same error.
Weirdly it does seem to complete the action after I "Ok" the error message.
Any ideas?
I am running this on Mac OSX 10.9.1 on a pretty new MacBook Pro. I've checked for updates and I'm running the latest version. (I'm running the trial version, as I am trying to decide whether or not to switch over to CC from my desktop apps, but I would hope it is the same as the full commercial version)

For me the Fireworks stopped when it got to "Intializing Tab Windows", then a crashed and displayed "Could not complete your request. an error occurred" and would never load. Basically dead. I couldn't use it at all. My whole workfow came to a stand still.Fireworks-Error.jpg
BACKGROUND
Just before this happened, I was trying a new feature from within Dreamweaver. While inside Dreamweaver, I could double-click an image file and it opened in my Fireworks to be edited. I thought . . . Wow, this is really cool. I edited that image and closed it and continued on my work. Since then, that "Connection" between applications has become permanent. Fireworks "THINKS" it is still connected to Dreamweaver. Later Fireworks would NOT open/load at. I would always get the above error.
PARTIAL SOLUTION
BTW: I had to do this twice, because the first time, I missed a file somewhere.
I had to completely uninstall all ADOBE applications. I mean everything! I had CS3 & CS4 and Adobe Readers on my system.
Since I'm on the mac, I went through the "Application Support" both user and system and the "Preferences" for both user and system and deleted everything that had either "adobe" or "macromedia" in it. There was also a file in the "Launch Agent & Daemons".
I emptied the trash and did a power off restart. Then I reinstalled CS6. Now Fireworks at least loads and I can use it again, but it still isn't the same.
OBSERVATION
Fireworks and Dreamweaver are still "Connected". It won't save an existing PNG file as itself, it displays an error, "That file is open in another application", which is NOT true. I have to use the "Save As" option, and use the Finder to rename that file. I also notice an extra file labeled ex:0000056 which looks like the file I tried to save.
So at least I can use my Fireworks again although it is irritating. I don't know how to "CUT" the connection between applications. Uninstalling & reinstalling did NOT reset this, the only option left would be a backup, wipe and fresh install of my entire laptop. I just don't have time to do that right now. Hope that helps someone else.
Arlene

Request of all participants

Similar Messages

Maybe you are looking for