Require Maximum Rows & Columns to shown in report once generated....

Hello,
My client has a query that when a report is generated through Discoverer via the Oracle Self Service, it displays a limited set of rows and columns. The user has to click on the rows and column link (right above the displayed report) and then enter the values of how many rows or columns to exceed, to which then a whole report is refreshed displaying the desired data.
The query my client has and wants to know is whether there is a possibility that the whole report, including maximum rows and columns, is displayed in one go, rather than clicking and setting up rows and column in every report again and again...??
Thanks!

Hi,
I assume you talk about the discoverer viewer.
In order to accomplish the user desire, the owner of the report should set once the columns and rows number to the max and save it like this.
then every user will get the maximum number of rows (999) and columns.
Tamir

Similar Messages

Issue with row/column text lengths in report painter

Hi Gurus,
I have created a report painter report with formatting of the row/column length text as medium, but for one FS item/GL Account the report when executed still picks up only the short text length. I am not sure how this can be resolved.
Any ideas is appreciated.
Regards
Satish

Applied OSS Note 360096 and it worked. Thanks for all your help.

How to hide row column on condition in report

Hello everyone,
Can its is possible to hide a Column of a row in report.
For one customer i am having Opening Balance n Closing Balance data.....i m breaking my report on customer wise (First Column). So I can see Customer only one time not 5..... now i want to see Opening Balance Data only in first row n Closing Balance Data only in last row.
How can i achieve this, pls help!
regards,
UKJ

Hi,
I have no idea but try this:SELECT SEGMENT1,
        VENDOR_NAME,
        VENDOR_SITE_CODE,
        INVOICE_NUMBER,
        INVOICE_DATE,
        INVOICE_TYPE_LOOKUP_CODE,
        PAY_DATE,
        DESCRIPTION,
        CHECK_DATE,
        CHECK_NUMBER,
        VOUCHER_NUM,
        SUM(debit) debit,
        null credit,
        op_bal,
        cl_bal
from (
SELECT SEGMENT1,
        VENDOR_NAME,
        VENDOR_SITE_CODE,
        INVOICE_NUMBER,
        INVOICE_DATE,
        INVOICE_TYPE_LOOKUP_CODE,
        PAY_DATE,
        DESCRIPTION,
        CHECK_DATE,
        CHECK_NUMBER,
        VOUCHER_NUM,
        SUM(debit) debit,
        null credit,
        op_bal,
        cl_bal
        row_number () over (partition by VENDOR_NAME order by INVOICE_DATE) rnk
from (
SELECT SEGMENT1,
        VENDOR_NAME,
        VENDOR_SITE_CODE,
        INVOICE_NUMBER,
        INVOICE_DATE,
        INVOICE_TYPE_LOOKUP_CODE,
        PAY_DATE,
        DESCRIPTION,
        CHECK_DATE,
        CHECK_NUMBER,
        VOUCHER_NUM,
        SUM(debit) debit,
        null credit,
        op_bal,
        cl_bal
    FROM (
SELECT POV.SEGMENT1,
       POV.VENDOR_NAME,
       pov.vendor_id,
       POVS.VENDOR_SITE_CODE,
       hou.SET_OF_BOOKS_ID,
       API.INVOICE_NUM INVOICE_NUMBER,
       API.INVOICE_DATE,
       API.INVOICE_TYPE_LOOKUP_CODE,
       APPL.ACCOUNTING_DATE PAY_DATE,
       API.DESCRIPTION DESCRIPTION,
       TO_CHAR(APC.CHECK_DATE, 'dd-MON-yyyy') CHECK_DATE,
       APC.CHECK_NUMBER,
       APC.DOC_SEQUENCE_VALUE VOUCHER_NUM,
       API.INVOICE_AMOUNT,appl.amount,
       DECODE(API.INVOICE_TYPE_LOOKUP_CODE,'CREDIT',API.INVOICE_AMOUNT ,appl.amount) debit,
       null credit,
       jai_ap_rpt_apcr_pkg.compute_credit_balance(API.INVOICE_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) cr_amt,
       jai_ap_rpt_apcr_pkg.compute_debit_balance(API.INVOICE_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) dr_amt,
       jai_ap_rpt_apcr_pkg.compute_credit_balance(:P22_FROM_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) -
       jai_ap_rpt_apcr_pkg.compute_debit_balance(:P22_FROM_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) op_bal,
       jai_ap_rpt_apcr_pkg.compute_credit_balance(:P22_TO_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) -
       jai_ap_rpt_apcr_pkg.compute_debit_balance(:P22_TO_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) cl_bal
    FROM AP_INVOICES_ALL API,
         AP_INVOICE_LINES_ALL APIL,
         AP_INVOICE_DISTRIBUTIONS_ALL APD,
         PO_VENDORS POV,
         PO_VENDOR_SITES_ALL POVS,
         AP_INVOICE_PAYMENTS_ALL APPL,
         AP_CHECKS_ALL APC,
         hr_operating_units hou
   WHERE API.INVOICE_ID = APIL.INVOICE_ID
     AND API.INVOICE_ID = APD.INVOICE_ID
     AND API.VENDOR_ID = POV.VENDOR_ID
     AND API.VENDOR_SITE_ID = POVS.VENDOR_SITE_ID
     AND API.INVOICE_ID = APPL.INVOICE_ID
     AND APPL.CHECK_ID = APC.CHECK_ID
     AND APIL.line_number = apd.invoice_line_number
     AND APD.match_status_flag='A'
     AND API.org_id=hou.ORGANIZATION_ID
     AND APIL.LINE_TYPE_LOOKUP_CODE='ITEM'
     AND api.org_id = nvl(:p22_org_id,api.org_id)
     AND TRUNC(API.INVOICE_DATE) BETWEEN NVL (:P22_FROM_DATE,API.INVOICE_DATE)AND NVL(:P22_TO_DATE,API.INVOICE_DATE)
GROUP BY SEGMENT1,
         VENDOR_NAME,
         VENDOR_SITE_CODE,
         INVOICE_NUMBER,
         INVOICE_DATE,
         INVOICE_TYPE_LOOKUP_CODE,
         PAY_DATE,
         DESCRIPTION,
         CHECK_DATE,
         CHECK_NUMBER,
         VOUCHER_NUM,
         op_bal,
         cl_bal
UNION
SELECT SEGMENT1,
       VENDOR_NAME,
       VENDOR_SITE_CODE,
       INVOICE_NUMBER,
       INVOICE_DATE,
       INVOICE_TYPE_LOOKUP_CODE,
       PAY_DATE,
       DESCRIPTION,
       CHECK_DATE,
       CHECK_NUMBER,
       VOUCHER_NUM,
       debit,
       SUM(credit) credit,
       op_bal,
       cl_bal
     FROM (
SELECT POV.SEGMENT1,
       POV.VENDOR_NAME,
       POVS.VENDOR_SITE_CODE,
       API.INVOICE_NUM INVOICE_NUMBER,
       API.INVOICE_DATE,
       API.INVOICE_TYPE_LOOKUP_CODE,
       NULL PAY_DATE,
       API.DESCRIPTION DESCRIPTION,
       NULL CHECK_DATE,
       NULL CHECK_NUMBER,
       NULL VOUCHER_NUM,
       DECODE(API.INVOICE_TYPE_LOOKUP_CODE,'CREDIT',NULL ,abs(API.INVOICE_AMOUNT)) credit,
       DECODE(API.INVOICE_TYPE_LOOKUP_CODE,'CREDIT',abs(API.INVOICE_AMOUNT)) DEBIT,
       jai_ap_rpt_apcr_pkg.compute_credit_balance(API.INVOICE_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) -
       jai_ap_rpt_apcr_pkg.compute_debit_balance(API.INVOICE_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) op_bal,
       jai_ap_rpt_apcr_pkg.compute_credit_balance(:P22_TO_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) -
       jai_ap_rpt_apcr_pkg.compute_debit_balance(:P22_TO_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) cl_bal
   FROM AP_INVOICES_ALL API,
        AP_INVOICE_LINES_ALL APIL,
        AP_INVOICE_DISTRIBUTIONS_ALL APD,
        PO_VENDORS POV,
        PO_VENDOR_SITES_ALL POVS,
        hr_operating_units hou
   WHERE 1=1
    and api.org_id=apil.org_id
    and API.INVOICE_ID = APIL.INVOICE_ID
    AND API.INVOICE_ID = APD.INVOICE_ID
    AND API.VENDOR_ID = POV.VENDOR_ID
    AND API.VENDOR_SITE_ID = POVS.VENDOR_SITE_ID
    and api.org_id =apil.org_id
    and api.org_id=hou.ORGANIZATION_ID
    and apil.line_number = apd.invoice_line_number
    AND apd.match_status_flag='A'
    and apil.LINE_TYPE_LOOKUP_CODE='ITEM'
    AND api.org_id = nvl(:p22_org_id,api.org_id)
    AND TRUNC(APD.ACCOUNTING_DATE) BETWEEN NVL (:P22_FROM_DATE,APD.ACCOUNTING_DATE) AND NVL (:P22_TO_DATE,APD.ACCOUNTING_DATE)
GROUP BY SEGMENT1,
         VENDOR_NAME,
         VENDOR_SITE_CODE,
         INVOICE_NUMBER,
         INVOICE_DATE,
         INVOICE_TYPE_LOOKUP_CODE,
         PAY_DATE,
         DEBIT,
         CREDIT,
         DESCRIPTION,
         CHECK_DATE,
         CHECK_NUMBER,
         VOUCHER_NUM,
         op_bal,
         cl_bal)
where rnk = 1If it doesn't work as required then alter the line row_number () over (partition by VENDOR_NAME order by INVOICE_DATE) rnk
I've just guessed that you can find a unique record (a persons account) by partitioning by the vendor_name at that point but perhaps you need other things.
Mike

Link column from an interactive report to insert a row in a tabular form

Hi, I need your help, i'm new on APEX and i really need to make a "link column" from an "interactive report" to insert a row into a "tabular form".
I mean that when you click the "link column" instantly create a new row in the Tabular form with the information of the linked row on the interactive report. Its something like that.
I really appreciate your help.
Ricardo Capuz

Hi Ricardo,
You can use the following code as per your requirement (this is just an example),
(In this case IR report is in Page#1 and Tabular form is in Page#2),
On Page#1, Create a hidden item (i.e 'P1_ID')
IR Report query as like the below,
select empno,
ename,
job,
mgr,
hiredate,
sal,
comm,
deptno,
empno "copy"
from empUse the below JS code in Page HTML Header section,
function f_insert_row(pSub)
$s('P1_ID',pSub);
doSubmit('ADD');
Edit Report Attribute -> copy column -> Under Column Link
Link Text: Select your column name (i.e. #EMPNO#)
Target: URL
URL: javascript:f_insert_row(#EMPNO#);
Then create a process to insert like below,
BEGIN
insert into emp_test (select * from emp where empno=:P1_ID);
END;Process condition as * Request=Expression1* in Expression1 as 'ADD'.
At last, create a branch to Page#2, Check 'include process success message' and with the same condition as * Request=Expression1* in Expression1 as 'ADD'.
Thanks,
Lakshmi

Dynamically set maximum row count in Interactive Report

Hi,
Has anyone worked out a way of dynamically setting (e.g. via select list) the maximum row count value for an Interactive Report, taking into account issues with order by when the report is filtered. I'm aware of solutions like this: http://www.talkapex.com/2010/10/apex-reports-no-limit-downloads.html but as far as I can tell this doesn't work when the report is filtered and the IR is rewritten in the background. Data sets then become unreliable because they are reordered.
Thanks,
Mike

Hi Mike,
You can do that with javascript
gReport.search('SEARCH',100)the 100 you can replace for any number you like.I have a report with filter,sorting and groups and it is gives no problem there.
any number means any number but not higher than the number you set at Maximum Rows Per Page.
You probably can mix the solution from Martin and the above code.
Regards,
Kees Vlek
<tt>Company: http://www.orcado.nl
Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
Twitter: http://www.twitter.com/skier66</tt>
If the question is answered please change it to answered and mark the appropriate post as correct/helpfull.
Edited by: kvlek on 24-apr-2013 12:29
Edited by: kvlek on 24-apr-2013 12:35

NEXT button on report portlet shows 10 rows-maximum rows per page=9999

I created a report with the DB Provider portlet. I set the maximum rows per page to 9999 when displayed as a portlet and as a full page. I put the portlet on a page and it only shows 10 rows and then the next button.
If there are exactly 10 rows I get the next button. If I click it the next page loads with no data. If there are less than 10 rows there is no button.
If I create a new portlet it does not do this. I'm only having the problem with one portlet now but I've seen it in the past. I usually just build the portlet again but I would like to know how to fix it.
I can't customize the portlet because of bug #3467032.

Select customize and set the number of rows to 9999. I'm guessing that it's currently set to 10.

Displaying the Row and Column number in the report

I am trying to show row and column number in the report (not just web preview). I am using Hyperion Reports Version 7.2.5.168

use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul

Navigation on row and column total in pivot report

Hi All,
I have created a pivot report with 2 dimension columns and one measure and defined row and column total. Now, users wants to have a navigation report on the row/column total so that once he clicks on total value, he can see the detail report. While doing this, he also wants to pass on the 2 dimension column values to detail report.
Is there any workaround for this?
Thanks in advance.

use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul

OBIEE 11g: Report not displaying maximum rows per page

I have an OBIEE report that is not displaying the maximum rows per page. When I click on the UP/DOWN arrow at the bottom of the report there is no change.

Hi,
Refer the below link.
http://satyaobieesolutions.blogspot.in/2012/08/limit-row-in-table-and-graph-in-initial.html
OR,
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=1198961.1
Add the following to your instanceconfig and then restart the presentation service.
file path
D:\Oracle\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml just add below lines
<Views>
<Pivot>
<MaxCells>6500000</MaxCells>
<MaxVisibleColumns>100</MaxVisibleColumns>
<MaxVisiblePages>100</MaxVisiblePages>
<MaxVisibleRows>65000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>500</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>65000</DefaultRowsDisplayedInDownload>
<DisableAutoPreview>false</DisableAutoPreview>
</Pivot>
<Table>
<MaxCells>6500000</MaxCells>
<MaxVisiblePages>100</MaxVisiblePages>
<MaxVisibleRows>65000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>500</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>65000</DefaultRowsDisplayedInDownload>
</Table>
</Views>
Hope this help's
Thanks,
Satya

Empty rows, Columns in EPM reports

Thru the EPM new report creation ICON, I am selecting rows and columns to create new report.
I am selecting nearly 20 accounts in account selection most of them are parent account.
However while displaying the report inbetween some of the accounts I need to leave empty rows and put some summation totals.
Is it possible to leave many blank lines in between some of the accounts? How to do it?
Similarly in the column I have selected time dimension and inbetween some months I need to put some local member formula.
Does the EPM report works like that? Or do I have to go for EPMretrievedata based reports.
Appreciate inputs.

Please, search forum about static reports, I have explained this approach number of times.
Example:
Static report in BPC NW 10
Replacing dim values with derived values
Vadim

Column link in interactive report to run procedure and refresh

I have an interactive report which displays a report based on a table. This is a summary table populated overnight from some complex spatial analysis, which takes a few hours to run. I have a requirement to allow the user to refresh one row in this table - they would do this during the day if they needed to see the most up-to-date values.
I have a package with two stored procedures - one which does the full refresh of the table, and one which refreshes one row when PK is passed in.
One of the columns in the table is 'last_refreshed' which is a date - this is shown in the interactive report including minutes.
I was thinking that maybe I could include a hyperlink on this 'last_refreshed' date column in the report. When a user clicked on it, it would run the stored procedure for that row and would refresh the report.
Any ideas on how I could do this? I've hit a bit of a dead end for now.
Thanks

OK, I worked it out.
I created an application item to store a global variable.
Then in the column attributes of the report, I set the 'last_refreshed' to be a linked column, setting target to the current page and then setting the application item global variable to be the row PK.
Then I have a Process which runs the required stored procedure reading the application item global variable, set to run on page load.
Sorted.

How to show the columns dynamically in OBIEE report based on the selection?

Hi,
I have a requirement where the columns should be dynamically shown in report based on what we select in propmt page.
I'm creating a report in OBIEE where i want to give an option to the end user to select the columns whichever he wants to see in the report.
For example I have the following columns in the report already:
Customer Name,
Customer Number,
Bank Account,
Address
I want to give an option to the user to select 'Customer Mail ID' dynamically and see the column to be displyed in the report along with the existing columns.
Through 'Column Selector' user can select a single column at a time, but if he want to select more than one column, how can we do this ?
Please help me out in resolving this issue.
Thanks,
Chaithanya.

Hi Chaithanya,
there's not a straight solution for this. You can create different analysis containing different number of columns and then directing the user to this analysis using Action Links or you can also use View Selector to switch from one view (analysis) to the other. But it's not going to be very flexible nor dynamic.
J.

Re : Issue with the column display in Bex reports

Hello Gurus,
I have an issue with the reports in Bex, this is a bit confusing scenario I would try to explain in more details. A query was already built for monthly Report in Sales and Billing for which the variable were Calender month/year range 1 (mandatory), range 2 range 3 range 4. These 4 variable were created and moved to column rows in query.
Later the user wanted the copy of same report but he wanted the variables to be Calender date range 1 (mandatory), range 2, range 3 , range 4. I have created them with 0calenderday as reference and moved to the columns.
for the monthly report text variables were already existing for the Calender month/ year, but for the daily report text variable were not existing for Dates. I have created a text variable for the date in the following way processing by
" replacement path" and reference characteristic as 0calday and in the replacement path tab.. in replace variable the selection is info object, the next option Replace with " External charactersitic value key " .
By creating this text variable the dates were being displayed in the colum header like 11/01/2013 - 11/30/2013 which satisfies the requirement.
But the user wanted to see the report same like monthly report when the mandatory variable Calender year/ month is selected, the rest of the columns range 2, range 3, range 4 are displayed as unassigned in the report. but coming back to the daily report when the user is giving the Calender date rage 1, he is finding that Calender date range 2, range 3, range 4 are also being displayed with values. He want to see the Calender date range 2,3,4 as unassigned in the report just like monthly. Please find the images attached.
As Calender month/ year is predefined, if the calender range values are not given it would show up as not assigned default. I have created a separate text variable for Calender day, I believe that could be the reason rest of the columns are not showing up as unassigned. The user want to see them as unassigned like monthly report columns.
I tried different ways changing the text variables but I could not change the display of the columns in Calender date report by the option - replace with ----> External characteristic value key, key, label. when I chose the option external characteristic value then the date was showing up in the text of the column when report is run ( Please find the image for the reference in the attachment ). . I request you to help me out in this. Please find the images of the variables and output below.

Anshu,
Thank you very much for above code I made minor changes to the code that finally worked. I created 4 different text variables needed for Calender date range 1, 2 ,3 ,4. Please find the code below for the text variable that worked in the system
WHEN 'ZTEXT_CAL1'.
   READ TABLE I_T_VAR_RANGE INTO loc_var_range
   WITH KEY VNAM = 'ZCALDATE1'.
    IF loc_var_range-LOW = '#'.
      dt_low = 'Not Assigned'.
      dt_high = 'Not Assigned'.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ELSE.
      CONCATENATE loc_var_range-low+4(2) '/' loc_var_range-low+6(2) '/' loc_var_range-low+0(4) into dt_low.
      CONCATENATE loc_var_range-high+4(2) '/' loc_var_range-high+6(2) '/' loc_var_range-high+0(4) into dt_high.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ENDIF.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.

How to wrap a Column (Increase/Decrease column width) in Interactive Report

Hi,
I have a Interactive Report and I want to wrap the column values.
Also want to increase/decrease width of the columns..
I have 2 columns say.. Description and List
List - aaaaaaa, bbbbbbb, hhhhhhh, nnnnnnn, 222222, 55555555, 77777777, ..... // list of values are seperated by ,
         // 1. want to wrap the values ..I mean to decrease the width
Descriptiopn - sdgssdjkllkkkkkkkk // -- here I want to increase the width of column
                 dgdggdfgdfgdgg
                 dfgdfgdfdfggfdg
                 dgdgdgdgdgdf2ndly for the List Column, can I put the sepearte values in each Line (values are seperated by , here) - ROW will only one.
For each ROW, I want to display List column as shown below.
      List - aaaaaaa
        bbbbbbb
        hhhhhhh
        nnnnnnn
        222222
IS this possible in Interactive Report??
Thanks,
Deepak
Edited by: Deepak_J on Feb 23, 2010 4:14 PM

Actually, I want to increase/decrease the column width in Interactive Report.
As shown the in the example of Description field...it's coming in 4-5 lines.
I want to increase the width of Description column..so that it should come only in 2 lines..
thanks,
deepak
Edited by: Deepak_J on Feb 23, 2010 4:32 PM

Disabling the display maximum rows per page

My project include many reports with table view, displaying 100 rows.
There is always arrows icon with the option to display maximum rows per page.
If user click on that option the OBIEE crashed, since there are a lot of rows.
I cannot decrese this number since all rows are required for other charts views.
a. Is there a way to set this parameter only for the table view?
b. Is there a way to disable this icon or not presenting it to the user?
c. Is there global way to coonfigure the default displayed rows number (e.g. from 100 to 20)?

unfortunately, you are limited to the SRW built-ins in Reports as far as setting object properties is concerned. I have checked this with the Metalink staff and I did get an admission out of them that this is true.
You can set the property in the property palette, but I'm not sure that this helps you as I take it you have a condition you would like to implement. I wish I could help you further, but Reports is limited in some areas, and setting object properties programmatically is one of them.

Require Maximum Rows & Columns to shown in report once generated....

Similar Messages

Maybe you are looking for