Required asset fields can be left empty when created in a PR/PO

Dear all,
I'm facing the following problem: When I'm creating an asset in a PR/PO I have the possibility to leave some required fields blank.
This is what I'm dong: transaction ME51N, choose multiple account assignment and in the bottom screen I create a new asset. In the next pop-up screen (asset master data) some data can be entered (e.g. cost center, location,...) but in our system the field 'capital investment order' is also set as required. Nevertheless it is possible NOT to enter a value in this field (one has to click the butten 'additional data' to be able to enter a value there) and still create a new asset. Furtheron, when working with this asset the system will issue messages because this asset is incomplete.
Can someone tell me if this is a system error because it doesn't seem logical to me that required entries can be left blank.
Thanks in advance.
Hans

Hi,
transaction AUVA (Report RAUNVA00) will list all of your incomplete Assets.
Incomplete Assets can be created in 2 ways:
1. Using a "froreign" transaction like ME51N. Asset creatin from those transactions is not 100% connected to the master record rules, as you may have noticed yourself. You can create the asset, however, it is marked as incomplete. Only the depreciation key is mandatory when creating assets in "foreign" transactions, the rest is not checked against the master record rules so it is very easy to create incomplete asset masters. See also OSS note 178533 on this.
2. Using the regular transaction(s) like AS01 - if after the asset was created, the rules have been changed, like, a certain field which was optional originally and left blank upon creation, now becomes mandatory. The result is again an incomplete asset.
Until the next depreciation run, but latest before the next year change in fixed assets, you have to add missing information to the master records listed in AUVA.
Hope that helps, points welcome
Csaba

Similar Messages

Is there a field for the website address when creating a contact?

is there a field for a website address when creating a contact?

I ended up getting a new phone, straight through Apple. I called their technical support and went through all he basics again and they decided to replace it. Was a pretty quick process - after defaulting and resetting the whole phone (about 2 hours), I called them back to inform that there was no change, so they set up the order.
I had to give my CC# so they could hold a charge on it (in case I didn't send my old phone bach, which they sent me a pre-posted package to send it in anyway). Had a brand new iPhone 4S in my hands in 4 days, which was pretty decent. I had uploaded everything previously to iCloud, so setting up the new phone was a snap.
Only thing I really didn't like was they charged me almost 30 bucks for shipping or processing, or something. Not so sure that should have been my responsibility after spending so much on a brand new product, only to have to have it warrantied after, like, a month.

[AS][INDCC] How to set Color Conversion field to No Color Conversion when creating PDF Export preset

How can i set Color Conversion field in Export to PDF dialog to No Color Conversion when creating PDF Export preset? i have done a bit of searching and have found where it has been recommended to set effective pdf destination profile to use no profile but it doesn't seem to be producting the expected results.

Yes, it seems that i had to make the change after creation, not while creating the preset. thank you.
tell application "Adobe InDesign CC"
     set newPreset to make new PDF export preset with properties ¬
          {name:"preset name", standards compliance:none, acrobat compatibility:acrobat 7}
     tell newPreset to set PDF color space to unchanged color space
end tell

Can't set date when creating a reminder on a Mac

When I try to set up a new reminder on my Mac, I type the description, then click the info icon to set the reminder date. I tick the 'remind me on a date' box, but I am unable to pick a date. The date picking calendar appears for a splt second, but it vanishes before I have a chance to select a date. The new item then appears under the current date and I have to go back in to set the reminder date. What's wrong? I have no such problem with the iOS version, where I can set the date while creating the new reminder, as you would expect.
Brian S.

New item also vanishes
This doesn't happen to me, so I am able to type the date in.
Probably a long shot.
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/
com.apple.reminders.plist. Move the .plist to your Desktop.
Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Saved text fields and check-boxes empty when 3D window activates

I've created Text Fields and Check-boxes in a pdf template, using LiveCycle Designer.
I create the 3D work in Reviewer, and use the pdf template during Export to 3D pdf.
Using 'Extend Features in Adobe Reader' the user can fill in the text fields, and click the check-boxes then save them with the pdf - just using Reader.
So far this is great!
The problem comes when the pdf is opened again and the 3D window (A3DR_3DFrame) activated.
All the completed fields empty!
This is not great at all!
I've did some tests and found that the filelds only clear if I include the Configs selection list box with the special name 'A3DR_Configs' in the template pdf. (A3DR_Configs lists the Configs stored in the 3D Reviewer file and the user can select the config from that list).
This is unfortunate, as the A3DR_Configs window is useful since it indicates to the user which 3D config is currently being viewed (ie the name of the current config stays highlighted).
Is this a bug that can be fixed or is there a workaround?
thanks,
Ian

Would you mind to post your commenton the the approriated Adobe forum page ?
This one is dedicated to Acrobat 3D
The correct forum page for Designer is:
http://forums.adobe.com/community/livecycle/livecycle_es/livecycle_designer_es
Thanks in advance
William

How can we remove empty space created in the flat file unintentionally

Hi Forums,
In our data flow, transactional data is flowing from one ODS(Acquisition Layer) to two different ODS's(Integration Layer) parallely. Error occured in first ODS(Acquisition Layer) i.e ODS was not getting activated for long time coz of empty space[#] in one of the infoobjects of a particular record. After manually deleting the request in two ODS's of Integration Layer & edited that particular record in PSA and reconstructed that deleted request form PSA the problem was solved.
This wrong entry is getting visible only at the time of ODS activation. Can any one suggest me a permanent solution for not occuring of empty space at the source system level or at SAP XI interface level or in the SAP BW system level?
Thanks in advance

Hi,
If your ino object is of numeric type then check the condition if it is # (empty) then
replace with 0 (zero), if it is char. then make it SPACE..you can use this following statement in your transfer / update rule for the IO.
replace all occurances of '#' with ' '. (for Char.)
(for Numeric)
if COMM_STRUCTURE-XXXX is initial.
RESULT = 0.
endif.
Hope it helps..
assign points if useful.
Cheers,
Pattan.

How can I export Keywords when creating a Web Gallery?

I would like to include the keywords applied to an image when exporting to a Web Gallery. I have learned how to include the caption, and there's a possibility of copy and paste the keywords to the caption before export, but as you can tell, that adds unnecessary steps.
I suppose the larger question is "how do I customize the exported web gallery, and the content it includes?" but that will come next.
Big picture, I'm working on creating a searchable "proof book" and my initial thoughts are to create a custom html template which includes a Google search bar, and indexes / searches the keywords of each photo, exported to the web gallery.
Step one is to get the keywords to export ...

Right-click the page, choose View Page Info, and click the Permissions tab. There you can turn off automatic loading of images (uncheck Use default first to enable the controls). Any luck?
There might be a way to restore that more direct right-click menu item if you need it frequently, but I haven't researched it.
To clean up a page for printing, you also could consider an add-on like the following: [https://addons.mozilla.org/en-US/firefox/addon/print-edit/ Print Edit :: Add-ons for Firefox]. Then you wouldn't have to re-enable images each time.

Can use ASM only when creating database using dbca

I have a problem. When i create a database using DBCA, i can only use ASM as the file sytem. why ?
i just installed the 10gR2 with cluster and donno why i cannot use ocfs.
Thanks.

What were your reasons with going with OCFS rather than ASM?
Thanks.

Can I limit options when creating digital sig?

Hi, all. Thanks, in advance, for any help :-)
We have created an application in LiveCycle and have incorporated digital signatures to allow applicants to sign the various forms within the application, including W-4 and I-9. I have several questions and will post some as other topics, but let's start with this...
The average person filling out one of these applications jack around with options in the create digital ID wizard that they don't need to change, so I want to know if there is a way to lock down these options, such as the font, digital sig file type, country and show only the create new ID option in the first dropdown rather than showing every ID that's been created on that pc. As well, some options are totally unneccesary and I would like them to not show up at all.
Is there any way I can change these things in the wizard?
Thanks,
Michelle

Michelle
As I mentioned in my reply to yuor other question, when Acrobat is used to create a digital certificate, it is creating a self-signed certificate that conforms to the X509 certificate standard. I'm sure that the information that the self-signed certificate creation wizard in Acrobatis capturing is necessary to create a valid X509 digital certificate.
There is no way that I am aware of to "customize" the self-signed certificate creation wizard in Acrobat.
Regards
Steve

Can I use FormsCentral when creating a form from existing document?

Hi,
I am trying to make a template in Formscentral. I want to use a picture with our corporate design for forms. I can change that in a PDF, but if I want to use that in FormsCentral, The picture is not paper wide (as it should), but leaves white margins an header and footer. But if I try to make a form and chose 'from existing document' I seem to not be able to end up in FormsCentral. What am I doing wrong?
Isabella

Hello George,
How do I upload a PDF to the FormsCentral service? Wil I see that form then in My Forms or in the the standard templates list? I want to be able to re-use a collored PDF with no fields in it. I use this one to make several forms which will all look the same in the background.

Why can't i backspace when creating an email?

I am using safari and using the website Charter for my email. When i compose an email i cant backspace a letter and cant hightlight and delete a word either. Charter claims no responisbility. They told me to come here. I appreciate any help I get, thanks!

You are bound to come across some anomalies using web based email.
See if this helps...
Go to ~/Library/Caches/com.apple.Safari
Move the Cache.db file from the com.apple.Safari folder.
~ (Tilde) character represents the Home folder.
For LIon: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library
You might try setting up the Charter account via the pre installed Mac Mail app so you can avoid using a browser to access your email. I'm not certain if Mac Mail will support a Charter account but worth taking a minute to try.
Launch Mail. From the menu bar click Mail > Preferences then select the Accounts tab then the Account Information tab.
Click + under the Accounts panel on the lef then type in your name, user name and password then click Create.
If it will setup successfully, just click the Mac Mail icon in the Dock to start a new mail message. If you have unopened email, there will be a red badge of the Mac Mail icon in the Dock.
By the way, Apple does not support third party mail clients that are accessed via a browser, only Mac Mail.

Can't see database when creating portal provider

I am creating a portlet page and trying to create a DB portlet provider. When I go to select the schema to store the portel info in I only have the schemas on the Application Server as a selection and I want to store them on the database server. I have a schema already setup on the database server for this. I can see both databases in the Enterprise Manager Council. What do I need to do to get it to connect to the database server so I can use it's schemas, users, and data? I don't think I have discoverer configured right. Can anyone help to get me on the right track? Thanks alot

if you can access the db via standalone this means u have a tnsnames entry set up in your local oracle home.
Accessing via OMS is another story all together. First you must have an OMS Oracle Management Server Running and
configured. The OMS sits over its own database know as the repository.
You have to have database 'discoverd' by the OMS in order to see it. You can manually discover or have an agent running
on the box that hold the db you want to see and discovery is automatic.
Without OMS you cannot monitor, schedule jobs, alerts and probably 80% of what OEM is. The E stands for Enterprise.

Can not change vendor when creating a new Development Component in NWDS

Dear friends,
Im trying to create a new Development Component in NWDS. Our NWDS is connected to NWDI and we are using CM Services option of NWDI.
Before I could create a DC and change the vendor but now I cant change it anymore. Now, the vendor is by default sap.com and we cant change it and it seems that we also have to put our project in a separate directory. home/ directory or other directories in the list.
See below screen shots...
If I make a new DC than we see it like this: home/bpm_test [sap.com].
If I make a new DC in my LocalDevelopment I can change the vendor and I dont have to choose a home directory.
Do you have any idea how to change that?
Any help would be greatly appreciated.
Thank you in advance,

HI,
it seems that the vendor is defined in the NWDI track. That's why you can't change it.
regards,
Vasils

Can not find disks when creating ASM disk group (11.0.2.3 on OEL 6)

Hi
I`m trying to install 11.0.2.3 Grid on OEL6.
Every thing is fine until it prompt to ask where I want to put OCR and VOTING DISK. I choose to put them in ASM. So it prompt another window to ask create ASM DISK GROUP.
In this window there was an area called "add disk". There suppose to be some disks listed in this area to chose. But in my case, nothing here. I can not chose disks to add to ASM DISK GROUP.
Below are descriptions of my installation.
Oracle Grid 11.0.2.3
OEL 6 as the platform.
I use two nodes mounting the same NFS. I created some zero-padded files on the NFS directory as the ASM DISKS. (This disks should be showing the the area above)
I install everything using only one account oracle. The group is oinstall and dba
Edited by: Kramer on Jun 5, 2013 8:52 PM

Well as i see your asm_diskstring could be the problem. ASMlib would have been there isnt it , I would want you to stick to default value and then try also I would suggest you to once post the output of the following and lets see whats happening
[root@ora ~]# /etc/init.d/oracleasm scandisks
[root@ora ~]# /etc/init.d/oracleasm listdisks
[root@ora ~]# ls -ltr /dev/oracleasm/disks/*

FDM "Error: Can't authenticate user" when creating new apps

We are experiencing the above error when trying to create a new FDM application, and cannot seem to get past it. The details are as follows:
- FDM manages to create the folder structure on the server fine, so suspecting SQL or HSS permissions/provisioning
- SQL database is not created
- Creating the SQL database manually beforehand does not help either
- The EPM Admin experiences the same error!
- No FDM logs appear to have been generated in C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\fdqm
We were able to create FDM apps fine at some stage, but cannot now for some reason. Please let me know if you have any suggestions.

On the FDM server, from the Start menu, go to All Programs --> Oracle EPM System --> Financial Data Quality Management --> Load Balance Manager --> Load Balance Configuration.
On both the Authentication Providers tab and the Application Servers tab, you should see at least one entry. If you do not see an entry on either of these tabs, enter the appropriate settings on each tab, then go to the General tab and enter the password for the DCOM account. If, on the other hand, the original settings are intact, just go to the General tab and enter the password for the DCOM account. If you enter the correct password and do not get an error, then this verifies that the DCOM settings have not been corrupted.

Required asset fields can be left empty when created in a PR/PO

Similar Messages

Maybe you are looking for