Required some needful regarding my issue

hiiiiii
how upload opm production completed batches.....
please do some needful n advance thankful.....

Ajay,
Are you looking at uploading the batches in completed status into OPM from another application?
If so, you can leverage the standard APIs in OPM. However, following points may be considered before the batches are uploaded
1. Valid Formulas / Routings & Recipes exists if you are in OPM 11i
2. How would the Raw Materials ( Ingredients) & Finished Products be accounted for and reconciled
3. How would the resource usage be accounted for
4. Impact on costing
If you are looking at only a few such batches, then these may be created manually as well, however considering the above points.
krishna
Edited by: Krishna on Aug 16, 2010 2:40 AM

Similar Messages

Required some information regarding synckey.

iam trying to modify the standard table MDK_INVENTORY by using syncbo of type S01 :- as it requires sync key
can some one inform me how to get the sync key and does the sync key is generated for each and every entry.
kindly give me some inputs.
Regards
Manohar.
Edited by: Gouri Manohar Gadhamsetty on Oct 24, 2008 12:28 PM

Hi Julian,
Thanks for the information.In getSyncBoInstances() method I am tring to create the SyncBo instance by passing SyncBo name and sync key.But it is unable to create the SyncBo object, returning null.
SyncBo sb = getSyncBoInstanc(syncBoName,syncKey);
(sb is null)
what might be the problem.Kindly reply soon.
Regards,
Manohar.
Edited by: Gouri Manohar Gadhamsetty on Oct 24, 2008 3:13 PM

Required some help regarding Identity Auditor

Hi all
Actually i am new in IDM field and want to explore Identity auditor. I have SIM 7.1 installed on my system. Actually i got the enough documentation about identity auditor but i want to find out from where i can reach the identity auditor .I mean if there is a special url to reach on identity auditor link and what can this auditor do.
Any pointer will really helpful for me.
Thanks in advance

Hello.
IdM 7.0 (Fall '06) merged Identity Manager, Identity Auditor and Identity Manager, SPE into a single product. As part of that convergence, the Admin Console was also updated to reflect the needs of all three products.
A number of features that had been in Auditor are available in the Compliance tab (e.g. Access Scans, Audit Policies) and in the Reports tab, there's a selector to shift between IdM Reports (e.g. reports tied to provisioning, and general user management activities) and traditional Auditor Reports (e.g. reports tied to compliance, audit policy scans, etc.).
So - same Admin Console for the Auditor / Compliance features. To make sure you 'see' everything, be sure to check the assigned Capabilities to your Admin / DA. There were Capabilities linked to Auditor and you'll want to make sure these are assigned to the DA you're using.
Make sense?

I need some help Regarding Cumulative totals

Hi ,
i have a requirement
1) we have columns calender Periods and actual to date. The requirement is we need cumulate the actual to date. i have applyed RSUM function in column formula.
2) it is working fine. But again the requirement is this cumulative solution is changed based on selected calender periods. but this is not expected.
3) ex:-
calender period actual Units Cumulative Units
oct - 2010 10 10
Nov-2010 9 19
Dec-2010 15 34
Jan-2011 25 59
Feb-2011 12 71
March-2011 19 90
April - 2011 13 103
May - 2011 18 121
June - 2011 24 145
this is the reqiurement but i have a Prompt Like
i hve selected resource categery some xyz and stert period is Jan -2011 and end period is May - 2011
the values disply's like bellow
Resource Category start Period End Period
xyz Jan - 2011 May - 2011
Jan-2011 25 25
Feb-2011 12 37
March-2011 19 58
April - 2011 13 71
May - 2011 18 89
But this is not actual cumulative units the actual value for Jan 2011 cumulative value is 59 not 25
can any one help me regarding this issue
regards,
ramesh

Hi,
Refer this link abt iview properties & set authorization ...
http://help.sap.com/saphelp_nw04/helpdata/en/13/81a66d100011d7b84b00047582c9f7/frameset.htm
Color- you have to change portal theme...
Width- create a new Loyout..
Regards,
Senthil K.

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

Regarding Performance Issue in MI Application

Hii All,
We have made a SmartSync MI Application.Everything thing is working fine.But the scenario is this that when we try to navigate through the application from one page to another ,for example if i click on one link to get details corresponding to that link(i.e) we are retreiving the data from the local database, but this is taking a lot of time and according to our buisness need we have to reduce this time to fetch the data.
Can anyone help me regarding this issue what can be done either in coding part, what parameters & standards to follow to improve the performance.
Thanks,
Devendra Phate

hello deven,
if you are only focusing on your application's performance
on the aspect of usability i.e. less waiting time, fast
response UI, i would personally suggest you to use AJAX.
put some processing part on the browser side and making
data retrieval from MI asynchronous... this way, your user
don't have to wait for all data to be presented, but rather
could work on the data presented in pieces (i.e. asynchronously).
anyway try googling for AJAX...
regards
jo

Have some doubt regarding the weblog (Lookup's in XI made simpler)

Hi All,
I have created the same scenario as mentioned in Siva's weblog (Lookup's in XI made simpler).
I having some doubts regarding the scenario, it will be great if you help me to resolve the same.
I am having a file-file scenario where I need to do lookup in database(MS-Access) through mapping.
The standard file-file scenario is in place and in addition I have created a receiver jdbc channel . I have also created the receiver agreement for the same in the cofiguration.
While creating the receiver agreement you have to specify the interface name which includes the message typeI have specified the normal format which we specify while configuring the jdbc receiver adapter.
In the message mapping I have created a advance user defined function as mentioned in your weblog which calls my receiver jdbc channel.
I have also specified the select query to be executed in the mapping program.
While testing I am getting the following error
Cannot produce target element /ns0:Role_MT/URole. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
<b>Can you please suggest me what all I need to do in addition to the file-file scenario for this lookup scenario to work.</b>
Thanks and Regards
Rahul

Hi,
Following is my user defined function
//write your code here
String Query = "";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
Query = "Select URole from Lookup where UName = ' " + UName[0] + " ' and UPassword = ' " + Pwd[0] +" ' ";
try{
channel = LookupService.getChannel("DB_service","JDBC_channel_receiver");
accessor = LookupService.getDataBaseAccessor(channel);
resultSet = accessor.execute(Query);
for(Iterator rows = resultSet.getRows();rows.hasNext();){
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("URole"));
catch(Exception ex){
result.addValue(ex.getMessage());
finally{
try{
if (accessor!= null) accessor.close();
catch(Exception ex){
result.addValue(ex.getMessage());
Thanks and Regards
Rahul

Deactivate transfer requirement and need manual transfer requirement

hi friends
our bussiness requirement is need manual transfer requirement orders .but when i do grn for raw materials system is automatic generate the transfer requirement numbers.my request is i want do manual transfer requirement with reference to material documnet.
pls help for this issue
with regards
dinesh
Edited by: code acess on Oct 28, 2010 8:36 AM

Transaction code : OMLR
Please deactivate TR creation against the movement type 101 and required movement indocator (B for PO) and also for combination of movement indicator and the Special stock indicator based on your reuirement.
Path
Spro --> Logistic execution --> warehouse management --> Interfaces > inventory managemnet> define movement types --> select LE-WM Interface to Inventory Management .
warm regards
Ramakrishna

Urgent help needed; Database shutdown issues.

Urgent help needed; Database shutdown issues.
Hi all,
I am trying to shutdown my SAP database and am facing the issues below, can someone please suggest how I can go about resolving this issue and restart the database?
SQL> shutdown immediate
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-01089: immediate shutdown in progress - no operations are permitted
SQL> shutdown abort
ORA-01031: insufficient privileges
Thanks and regards,
Iqbal

Hi,
check SAP Note 700548 - FAQ: Oracle authorizations
also check Note 834917 - Oracle Database 10g: New database role SAPCONN
regards,
kaushal

REgarding licensing issues involvng 'Computername' and the use of UpperCase4 vs Lowercase Letters

Does any one know if it would cause problems for the Office 365 software license to be displayed as licensed to an ALL CAPS name like 'MY-FAVORITE-PC' but the computer itself shows the computer name to be 'my-favorite-pc"?
If it does, which one should I change? A couple of people here have had this same problem (which usually occurs when they change to using a different PC for their account) I have to Deactivate their Old PC namer and then install the licnse to
their New OC using whatever name it has.
On more than one system, this has resulted in various odd "failure to contact Microsoft server" issues when activating. The problem continues for 7 days and then their copy of Office starts showing reed warning bards and eventually gets totally
unusable.
However, if I uninstall the office, deactivate the license, and reinstall it once again, it install just fine and acts ok but invariably at some point, the same thing occurs.
On one of them I noticed the difference in the case of the letters used in the computer name and the license name. On others I am wondering about various software add ins for Outlook or some other 3rd part application causing the problem. Whatever
it is, it gets extremely annoying. Officer 365 apparently must run an activation sequence almost constantly while Office 2010 (and I presume 2013) ran it once and were done with it.
Searching Google I have found too many possible reasons along with a lot of people who have had the same problems but no one seems to have the 100% solution. This has only started happening since we switched to Office 365 and only
seems to occur on systems that are changed out to different ones with the same User's 365 Account which is in good standing and has 5 available licenses of which only one is in use.
In the case of the caps vs lowercase I also wonder if changing the name to CAPS on their PC would create additional problems on its own?

Hi Questorfla,
For the Office 365 software license issue, I recommend you can post in dedicated Office 365 Forum to get a better response:
http://community.office365.com/en-us/f/148.aspx
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

MAC PRO (Early 2008) RAID CARD ISSUE - SYSTEM FREEZEHello (hopefully someone can shed some light on my issue) I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i m

Hello (hopefully someone can shed some light on my issue)
I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
I restarted the machine and this time a flashing question mark folder!
could not do a thing.
so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
(interestingly since the RAID card had been removed the RAID UTILITY from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
thanks for your help in advanced.

hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar problem some one else had!
working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
and try to restart, hoping all was fine, this was not the case :-(
I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
(nvidia geforce 8800gt 2x dvi).
I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
what was the cost to get this? bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)"

Help needed regarding the deployment architecture for PROD env

Dear All,
Please help me with some clarifications regarding the deployment architecture for PROD env.
As of now I have 2 single node 12.1.1 installations for DEV and CRP/TEST respectively.
Shortly I will be having a PROD env of 12.1.1 with one DB node and 2 middle tier (apps) node. I need help in whether -
1) to have a shared APPL_TOP in the SAN for the 2 apps node or to have seperate APPL_TOPs for the 2 apps node. The point is that which will be benificitial in my case from business point of view. The INST_TOPS will be node specific in any case right?
2) Where to enable the Concurrent Managers, in the DB node or in the primary apps node or in 2 apps node both for better performance.
12.1.1 is installed in RHEL 5.3
Thanks and Regards

Hi,
Please refer to (Note: 384248.1 - Sharing The Application Tier File System in Oracle E-Business Suite Release 12).
For enabling the CM, it depends on what resources you have on each server. I would recommend you install it on the the application tier node, and leave the database installed on one server with no application services (if possible).
Regards,
Hussein

Help needed regarding BADI in SAP-CRM 2007.

hi all,
i need some help regarding BADI for new creation and enhancement.
plz help, you will be rewarded accordingly.
regards.
raman.

Hi Raman,
visit this link
http://help.sap.com/saphelp_nw70/helpdata/en/32/a83942424dac04e10000000a1550b0/content.htm
http://help.sap.com/saphelp_crm40/helpdata/en/c3/69bf4abf1045e0966badb60d6160dd/content.htm
Regards
Anup.

Help Required - File to Proxy (Performance Issue)

Hi All,
One of my file to proxy scenario is taking 3 to 4 days to execute.
Basically XI picks up a file of 2-3 lakh records and pushing it to SAP via ABAP proxy. On the ABAP side, a BDC call is made to process the data. But the whole scenario takes 3 to 4 days for execution.
The scenario is an Asynch scenario and BPM is not used as its a very straight forward scenario.. Also the file can't be splitted as say each 10,000 records bcoz all of these records are interrelated and has to go to SAP end in a single shot.
Is there anything which can be done on either XI or ABAP side to optimize the scenario?.
Thanks,
Joe.

Joe,
Can you give more details?
Is this an Asynch call or a synch call?
Are you using a BPM, etc, maybe there is something wrong in the way you have designed your interface.
Proxies are supposed to provide the best perfromance and the fact that it is taking such a long time is really strange, and so maybe if you can give us details on your interface , some reason for this issue can be found out.
Meanwhile also look into this guide,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
Regards
Bhavesh

Can anyone put some light on this issue.

When transferring PO idocs from R/3 to the middleware, some idocs doesn't reach the destination due to one buyers address segment not getting populated.
Since this segment contains the address where it needs to to sent is missing, the idocs does not reach the concerned place.
But when the output is repeated, this segment gets filled up and idocs correctly reach the destination
In the program this segment is populated on the following condition.
The address number from the table T001W should match with the address number from the table ADRC..
if sy-sucrc eq 0, the segment gets populated else it does not.
But when the output is repeated in the PO, the sy-sucrc becomes zero again.
I don't understand the connection between when the output is repeated and the above condition.
How the above condition is getting successful when the output is repeated..
Can anyone put some light on this issue.

I have one customized field 'ZCOORNAME' in the DS 2LIS_05_Q0NOTIF. I have changed this field in Tcode- QM02 and checked the changes in TCODE - LBWQ (Extraction Queue) and I got the Changed entry but now when i am trigerring the V3 Job, these changes are not getting populated in RSA7 (Delta Queue).
For standard field changes, it is capturing delta properly, the problem is with only customized fileds..Can anyone put some light on this issue ....
Please try activating the datasopurce again and try it.
Can you pls le me know when will be the Customer Exit(CMOD) is going to hit ? Before the Delta Queue or After the Delta Queue or is it before the Extraction Queue / After the Extraction Queue ???
he customer exit is hit before the entries are populated in extraction queue. Actually, when the transaction is done, the changes are written to database table and at the same time into the extraction queue. Just before going to extraction queue, the custom fields get populated in customer exit.

Required some needful regarding my issue

Similar Messages

Maybe you are looking for