Labview w/ WebCam and Remote Access through the Web project

Hi there, I was wondering if someone can help me with my senior project.
I am planning on purchasing the NI Labview Remote Panel.
i want to be able to control Labview remote panel through the web.
Is it easy to build the NI Labview Remote Panel application on my own? I am still in college.
or
I can buy the NI Labview Remote Panel application for $309 and use the
applications to control my labview software through the web.
in that case, I was planning on writing a software to take USB camera and post it through the web.
what can i do with the usb camera?
can I change color? hear audio? is there anything that you guys can suggest me on doing if I get it to work with the web?
Please help...
Thank you in advance..
Best regards,
Krispiekream

duplicate post
Please stick to discussing this in one place

Similar Messages

Error 43 when accessing LabVIEW 2009 write/read file functions through the web server functionality

Is there any way around to avoid Error 43, "Operation cancelled by user" when using Web server?
I am using the example VI:s RemotePanelMethods-Server.vi and RemotePanelMethods-Client.vi to acces the MainGUI.vi from my workstation to a lab computer. * LabVIEW 2009 is installed in both machines.
* MainGUI.vi is wired to the VI access list in the Server VI but it also contains a hierarchy below that isn't, is this a problem?
* Several functions in MainGUI calls file read and write operations
The problem ocurrs when file read/write operations with no preselected path are selected through the Client. The traditional popup window requesting the file to read or write is never seen in the Client, but only the Error 43.
Thanks in advance

See this

How do I setup TimeCapsule up for remote access through the internet.

I have a first gen time capsule that I would like to access remotely when I'm not at home. I have a modem/router combo Motorola sb6141 at home that my time capsule is attached to. I have read on other threads that I need to turn off the wireless on my time capsule and have a dedicated IP address from Comcast. I was just hoping for more confirmation/ideas that have worked for everyone else. Thanks!

A Gen1 TC will need to be updated to 7.6.1 firmware for preference although the latest is 7.6.3 and use BTMM and iCloud.. as long as the TC is operating as the main router it will work better than other methods.. assuming you are a Mac to access it remotely. If you are not using a Mac what are you using??
http://jimmymacsupport.com/remotely-access-your-airport-extreme-or-time-capsule- files/
There is lots of info if you just google.. remote access time capsule
Or BTMM and icloud
Apple have several documents about how to do the setup..
Then of course there is the real world.. if you do all this and it fails.. as it can do.. post again.
Perhaps in this thread.
https://discussions.apple.com/thread/3699096?start=0&tstart=0

Can't access multiple mail accounts through mail access through the web OK

Mail will not let me access more than one web mail account. The error message reads that the server will not accept my password. When I go to the web mail site, I have no problem with any of the accounts. I have checked and rechecked the mail preferences, checked with my IP service and reset all the passwords just to start from scratch. Same results. Mail will not accept the changes I have tried such as viewing the header. I have tried to delete the "to" column and add "from" but it will not accept the changes. The one account it recognizes does not function properly. It leaves mail on the server and I have checked any preferences for that also. Even when I have the "functioning" account highlighted, menu options such as "long header" are grayed out. Any help would be greatly appreciated.

would that be the com.apple.mail.plist preference file located in the users folder then inside the library folder then the preference folder? I currently have no mail so i could do this. Thanks for any help

Download to a file, real-time oscilloscope traces accessed through the web: How?

Our new Textronix oscilloscope was assigned an IP address, and we are
viewing this oscilloscope's traces over the web using the IP address
assigned. Now, using LabVIEW, we want to download into a file an
oscilloscope trace at a particular instant in time, and we want to do
it many times as we want. Is LabVIEW 6.1 capable of doing that? If YES,
then how? What features do I use?
Thank you very much for your help!
Sincerely,
reynann7

Do a search for the Tektronix model under drivers, you should be able to find a labview driver for the instrument. The Tektronics scope I have (TDS3034) used TekVisa to what looked like "fake" a GPIB bus. When I installed Labview and NI-488 TekVisa would no longer work, I used the serial port on the TDS3034 instead.
Hopfully this points you in the right direction.
Andrew Alford
Production Test Engineering Technologist
Sustainable Energy Technologies
www.sustainableenergy.com

9i on Linux --OEM hangs when accessing through the web

I have OMS,Intelligent agent,apache started. Downloaded and installed the JInitiator Plug-in. When I access from NT/2000 I get the Oracle Enterprise Manager Console on my screen and then it hangs. Here is the output from the java console.
Oracle JInitiator version 1.1.8.10
Using JRE version 1.1.8.10
User home directory = C:\WINNT\Profiles\Ofrayman
Proxy Configuration: Manual Configuration
Proxy:
Proxy Overrides: <local>
JAR caching enabled.
Cache directory: D:\Program Files\Oracle\JInitiator 1.1.8.10\jcache
Maximum cache size: 50000000 bytes
Getting JAR file sizes...
Opening http://192.168.1.15:3339/oem_webstage/oemStage1.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemStage2.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemStage11.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemAppsMgr.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemChange.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemDiag.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemICache.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemResources.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemContext.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemDataGuard.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemLMViewer.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemImage2.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemImage3.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemImage5.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemImage6.jar no proxy
Opening http://192.168.1.15:3339/oem_webstage/oemLst.jar no proxy
Total amount of JAR data to download: 0 bytes
Loading http://192.168.1.15:3339/oem_webstage/oemStage1.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemStage2.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemStage11.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemAppsMgr.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemChange.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemDiag.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemICache.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemResources.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemContext.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemDataGuard.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemLMViewer.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemImage2.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemImage3.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemImage5.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemImage6.jar from JAR cache.
Loading http://192.168.1.15:3339/oem_webstage/oemLst.jar from JAR cache.
Opening http://192.168.1.15:3339/oem_webstage/oemImage1.jar no proxy
Loading http://192.168.1.15:3339/oem_webstage/oemImage1.jar from JAR cache.
org.omg.CORBA.NO_IMPLEMENT[completed=MAYBE]
     at com.visigenic.vbroker.orb.GiopStubDelegate.locate(GiopStubDelegate.java:399)
     at com.visigenic.vbroker.orb.GiopStubDelegate.bind(GiopStubDelegate.java:117)
     at com.visigenic.vbroker.orb.ORB.bind(ORB.java:1240)
     at com.visigenic.vbroker.orb.UnboundStubDelegate.bind(UnboundStubDelegate.java:27)
     at com.visigenic.vbroker.orb.UnboundStubDelegate.request(UnboundStubDelegate.java:115)
     at com.visigenic.vbroker.orb.UnboundStubDelegate.request(UnboundStubDelegate.java:107)
     at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:153)
     at org.omg.CosNaming._st_NamingContext.resolve(Unknown Source)
     at oracle.sysman.vxx.vxxo.VxxoORB.list(Unknown Source)
     at oracle.sysman.vxx.vxxo.VxxoEMORB.getNextBindName(Unknown Source)
     at oracle.sysman.vxx.vxxo.VxxoEMORB.bind(Unknown Source)
     at oracle.sysman.emSDK.client.omsClient.OMSConnection.initLoginServices(Unknown Source)
     at oracle.sysman.emSDK.client.omsClient.OMSConnection.doLogon(Unknown Source)
     at oracle.sysman.emSDK.client.omsClient.Client.doLogon(Unknown Source)
     at oracle.sysman.emSDK.client.omsClient.Client.silentLogin(Unknown Source)
     at oracle.sysman.emSDK.client.omsClient.Client.silentLogon(Unknown Source)
     at oracle.sysman.emSDK.client.guiComponent.logon.LogonDialogActionHandler.doLogon(Unknown Source)
     at oracle.sysman.emSDK.client.guiComponent.logon.LogonDialogActionHandler.actionPerformed(Unknown Source)
     at oracle.sysman.emSDK.client.guiComponent.logon.LogonDialog$EH.actionPerformed(Unknown Source)
     at oracle.ewt.button.PushButton.processActionEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWButton.processActionEvent(Unknown Source)
     at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at oracle.ewt.button.PushButton.activate(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMouseReleased(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Component.java:2210)
     at java.awt.Container.processEvent(Container.java:901)
     at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
     at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Component.java:1819)
     at java.awt.Container.dispatchEventImpl(Container.java:946)
     at java.awt.Component.dispatchEvent(Component.java:1751)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:1848)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:1637)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:1538)
     at java.awt.Container.dispatchEventImpl(Container.java:933)
     at java.awt.Window.dispatchEventImpl(Window.java:509)
     at java.awt.Component.dispatchEvent(Component.java:1751)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:85)
Exception occurred during event dispatching:
java.lang.NullPointerException:
     at oracle.sysman.vxx.vxxo.VxxoBookkeeper.setBaseName(Unknown Source)
     at oracle.sysman.vxx.vxxo.VxxoEMORB.bind(Unknown Source)
     at oracle.sysman.emSDK.client.omsClient.OMSConnection.initLoginServices(Unknown Source)
     at oracle.sysman.emSDK.client.omsClient.OMSConnection.doLogon(Unknown Source)
     at oracle.sysman.emSDK.client.omsClient.Client.doLogon(Unknown Source)
     at oracle.sysman.emSDK.client.omsClient.Client.silentLogin(Unknown Source)
     at oracle.sysman.emSDK.client.omsClient.Client.silentLogon(Unknown Source)
     at oracle.sysman.emSDK.client.guiComponent.logon.LogonDialogActionHandler.doLogon(Unknown Source)
     at oracle.sysman.emSDK.client.guiComponent.logon.LogonDialogActionHandler.actionPerformed(Unknown Source)
     at oracle.sysman.emSDK.client.guiComponent.logon.LogonDialog$EH.actionPerformed(Unknown Source)
     at oracle.ewt.button.PushButton.processActionEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWButton.processActionEvent(Unknown Source)
     at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at oracle.ewt.button.PushButton.activate(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMouseReleased(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Component.java:2210)
     at java.awt.Container.processEvent(Container.java:901)
     at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
     at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Component.java:1819)
     at java.awt.Container.dispatchEventImpl(Container.java:946)
     at java.awt.Component.dispatchEvent(Component.java:1751)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:1848)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:1637)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:1538)
     at java.awt.Container.dispatchEventImpl(Container.java:933)
     at java.awt.Window.dispatchEventImpl(Window.java:509)
     at java.awt.Component.dispatchEvent(Component.java:1751)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:85)
Opening http://192.168.1.15:3339/oem_webstage/oracle/sysman/vt/console/app/ConsoleBeanInfo.class no proxy
Opening http://192.168.1.15:3339/oem_webstage/sun/beans/infos/ConsoleBeanInfo.class no proxy
Opening http://192.168.1.15:3339/oem_webstage/oracle/sysman/emSDK/client/appContainer/WebApplicationBeanInfo.class no proxy
Opening http://192.168.1.15:3339/oem_webstage/sun/beans/infos/WebApplicationBeanInfo.class no proxy
Opening http://192.168.1.15:3339/oem_webstage/oracle/ewt/lwAWT/BufferedAppletBeanInfo.class no proxy
Opening http://192.168.1.15:3339/oem_webstage/sun/beans/infos/BufferedAppletBeanInfo.class no proxy
Opening http://192.168.1.15:3339/oem_webstage/oracle/ewt/popup/PopupAppletBeanInfo.class no proxy
Opening http://192.168.1.15:3339/oem_webstage/sun/beans/infos/PopupAppletBeanInfo.class no proxy
java.lang.NullPointerException
     at oracle.sysman.vt.console.app.Console.start(Unknown Source)
     at sun.applet.JinitAppletPanel.run(JinitAppletPanel.java:439)
     at java.lang.Thread.run(Thread.java:466)

as an IT, can't you fix the Outlook problem ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Routing and Remote access can cause cluster network issues?

After enabling routing and remote access on the servers, we found lots of cluster issues on our server like<o:p></o:p>
Cluster Service stopped
Communication was lost and reestablished between cluster nodes
Unable to access witness resource
Cluster resource failed
can RRAS enabling causes cluster network issues?
Rahul

Hi TwoR,
Please offer more information about your current cluster and RRAS configuration, such as are you installed the RRAS role on any cluster node? Are your cluster in Hyper-V environment?
Or if you want to create the RRAS cluster you can refer the following KB:
Deploy Remote Access in a Cluster
http://technet.microsoft.com/en-us/library/jj134175.aspx
How to configure Network Load Balancing (NLB) based cluster of VPN Servers
http://blogs.technet.com/b/rrasblog/archive/2009/07/02/configuring-network-load-balancing-nlb-cluster-of-vpn-servers.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Routing and Remote Access fails to install

Hello, I recently installed Windows Server 2008 beta 3 onto my new computer, which went smothly. I have ADDS, DHCP, DNS, IIS, Terminal Services, and Network Policy and Access Service installed and they all work perfectly. However, I recently tried to install Routing and Remote Access, but I got the following error message when I finished the configuration wizard: "Installation of the Routing and Remote Access Service failed because: Class not registered (80040154). Whats causing this, and how do I fix this?

I also have this trouble of an error when installing Routing and Remote Access "class not registered..."
It is a Windows Server 2008 RTM clean install.
Added machine to our Windows 2003 domain and then after reboot added Windows Powershell.
Logged in as domain admin and then when tried to add routing and remote access got the message described by everyone else.
Like others I need to know how to get over this problem.

Routing and Remote access - internal network not accessing internet through public network!

Hello,
Good Evening to all.
I got an issue in routing and remote access on windows 2003 server. This server is already configured as File server, domain server and Application server. Also configured as router (through routing & remote access) for connecting three different
network to each other. So This server has three NIC card installed and each NIC card represent separate network.
three different network are - 192.42.160.0/24 , 192.42.161.0/24, 192.42.162.0/24
Three NIC card installed on server as with following IP address -
NIC -1 = 192.42.160.220 , Sub- 255.255.255.0 , Gateway - NO
NIC -2 = 192.42.161.220 , Sub- 255.255.255.0 , Gateway - 192.161.220.112 (This ip for internet access so 4g router IP)
NIC -3 = 192.42.162.220, , Sub- 255.255.255.0 , Gateway - NO
Now the issue is I can reach to internet & (also pinging to router ip 192.42.161.112) from only one network that is - 192.42.161.0/24 , BUT when I trying to access internet from another two network (192.42.160.0/24 & 192.42.162.0/24) I cant access
it and moreover can't ping to internet router ip - 192.42.161.112...
So how I can access to internet from other two network also?
I was already configured static routing for all three network but still I was not success. really I don't know what exactly static routing it should be done in routing & remote access so that all three network can reach to internet?
Sorry if I am not able to explain properly. Please let me know if you need more explain on this...
Thanks to all.

Dear Milos,
I am happy to hear from you....
1.- Actually the setup was done long before by another guy and right now I don't want to change it.
Nice to hear from you! Thank you so much. Actually this is first time I am using technet forum upon the suggestion from one of the my friend. So any your help from you will help me a great in this issue...
I ran the route print command and given follow are the results.
I have only added the default route as per the below routes. Please guide me know how to add other static routes for three network.
D:\Documents and Settings\Administrator>route print
IPv4 Route Table
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 30 05 ad 8f 5c ...... Broadcom NetXtreme Gigabit Ethernet - Teefer2 Mi
niport
0x3 ...00 0e 0c a7 c4 f8 ...... Intel(R) PRO/1000 GT Desktop Adapter - Teefer2 M
iniport
0x4 ...00 0e 0c a7 c5 85 ...... Intel(R) PRO/1000 GT Desktop Adapter #2 - Teefer
2 Miniport
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.42.161.112 192.42.161.220 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.42.160.0 255.255.255.0 192.42.160.220 192.42.160.220 20
192.42.160.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.160.255 255.255.255.255 192.42.160.220 192.42.160.220 20
192.42.161.0 255.255.255.0 192.42.161.220 192.42.161.220 20
192.42.161.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.161.255 255.255.255.255 192.42.161.220 192.42.161.220 20
192.42.162.0 255.255.255.0 192.42.162.220 192.42.162.220 20
192.42.162.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.162.255 255.255.255.255 192.42.162.220 192.42.162.220 20
224.0.0.0 240.0.0.0 192.42.160.220 192.42.160.220 20
224.0.0.0 240.0.0.0 192.42.161.220 192.42.161.220 20
224.0.0.0 240.0.0.0 192.42.162.220 192.42.162.220 20
255.255.255.255 255.255.255.255 192.42.160.220 192.42.160.220 1
255.255.255.255 255.255.255.255 192.42.161.220 192.42.161.220 1
255.255.255.255 255.255.255.255 192.42.162.220 192.42.162.220 1
Default Gateway: 192.42.161.112
===========================================================================
Persistent Routes:
None
Regards & Thanks
Mahesh

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
Yes, if you are asking about using Time Machine to backup the Mac.
Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
You are not thinking of deleting the photos and files on your Mac, are you? If you do this, you will have no backups for those files.
Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
In other words, only delete files from your Mac that you can afford to lose.

Error 1053 when starting the Routing And Remote Access service

Hi all,
When I tried to start the "Routing And Remote Access" service on Windows 8.1 I got an error message as follow.
Could some one help me please.
Than's.

Hi MRAB,
Please check if all dependences are enabled first.
Then set the start type to Automatic.
Does this issue still occur after a restart?
Alex Zhao
TechNet Community Support

Routing And Remote Access Service: Error 1068: The dependency service or group failed to start

Hi,
I tried to establish a PPP connection between my windows 8.1 PC and another kind of machine using an USB cable. So, as usual on Windows XP and Windows 7,
I configured the COM in the modem list and I tried to start the
"Routing And Remote Access" service and then
I got this message.
So any idea why is failing?
Please help!
Thanks thaks thanks

Hi,
Was your issue resolved?
If no, please reply and tell us the current situation in order to provide further help.
Karen Hu
TechNet Community Support

I was wondering how to access my account. I broke my old iphone and i need to get access to my old apps and pictures and songs through the web..

How to access existing itunes account.

What do you mean "through the web"?
You can re-download purchased media and apps using iTunes on your computer. You can't, of course, run the apps on your computer, but you can download them and sync them to another iOS device.

Exchange Server 2013 and Remote Access VPN on a single server running Windows Server 2012?

Just by way of background, I have been installing and administering network servers, e-mail systems, VPN servers, and the like for many years. However, my involvement with Exchange and Windows Server has been mostly on the forensics and data recovery
level, or as a (sophisticated) user. I have never tried to deploy either from scratch before. My deployment experiences have been mostly with Linux in recent years, and with small private or personal "servers" running such cutting edge
software as Windows XP back when it was new. And even NetWare once.
When a client asked me if I could set up a server for his business, running Exchange Server (since they really want Outlook with all of its bells and whistles to work, particularly calendars) and providing VPN access for a shared file store, I figured it
could not be too difficult given that its a small business, with only a few users, and nothing sophisticated in the way of requirements. For reasons that don't bear explaining here, he was not willing to use a vendor hosting Exchange services or cloud
storage. There is no internal network behind the server; it is intended to be a stand-alone server, hanging off a static IP address on the Internet, providing the entirely mobile work-force of about 10 people with Exchange-hosted e-mail for their computers
and phones, a secure file store, and not much else. If Exchange didn't need it, I would not need to install Active Directory, for example. We have no direct need for its services.
So I did the research and it appears, more by implication than outright assertion, that I should be able to run Windows Server 2012 with Exchange Server 2013 on a server that also hosts Remote Access (VPN only) and does nothing else. And it appears
I ought to be able to do it without virtualizing any of it. However, I have spent the last three or four days fighting one mysterious issue after another. I had Remote Access VPN working and fairly stable very quickly (although it takes a very
long time to become available after the server boots), and it has mostly remained reliable throughout although at times while installing Exchange it seems to have dropped out on me. But I've always been able to get it back after scrounging through the
logs to find out what is bothering it. I have occasionally, for a few minutes at a time, had Exchange Server willing to do everything it should do (although not always everything at the same time). At one point I even received a number of e-mails
on my BlackBerry that had been sent to my test account on the Exchange Server, and was able to send an e-mail from my BlackBerry to an outside account.
But then Exchange Server just stopped. There are messages stuck in the queues, among other issues, but the Exchange Administration Center refuses now to display anything (after I enter my Administrator password, I just get a blank screen, whether on
the server or remotely).
So, I am trying to avoid bothering all of you any more than I have to, but let me just begin with the basic question posed in the title: Can I run Exchange Server (and therefore Active Directory and all of its components) and Remote Access (VPN only) on
a single Windows Server 2012 server? And if so, do I have to run virtual machines (which will require adding more memory to the server, since I did not plan for it when I purchased it)? If it can be done, can anyone provide any pointers on what
the pitfalls are that may be causing my problems? I am happy to provide whatever additional information anyone might like to help figure it out.
Thanks!

An old thread but I ran into this issue and thought I share my solution since I ran into the same issue. Configuring VPN removes the HTTPS 443 binding on the Default Site in IIS for some strange reason; just go and editing the bindings, add HTTPS and things
should be back to normal.

Win 7 Pro 64 occasionally fails to connect using IKEV2 to Win2008R2 Routing and Remote Access server

I'm a networking guy and having this troubling VPM issue that I can't find.
I have a number of VPN connections from my Win7Pro 64 PC to various customers. Their end points are all Windows Routing and Remote Access on Windows 2008R2 STD servers.
Every once and a while I will hang at Verifying User ID and Password and eventually get ERROR 809. Change the security type on my VPN connection from IKEV2 to PPTP - never an issue, connects in right away.
I can also try from another PC (at the same or alternate location) to get into that same server using the same credentials and access - no issue using either IKEV2 or PPTP.
This has happened at various times to various customers. Here is what I know it is not:
- Not the local or remote routers or Firewalls since I can always get in from other PC's going through the same network. Even so, tried rebooting all several times
- Not an ISP issue at either end since I can always get into other IKEV2 servers from the same PC and from other PC's to the server I can't from my PC.
This leads to the only logical conclusion. It is something to do with my Win7Pro 64 PC but for the life of my I can not find it.
I have obviously tried rebooting the Win7Pro PC. I have also tried recreating the VPN connection several times. Nothing.
Help!

Hi,
I know that you've mentioned that it is not a issue about firewall or router settings, but this error usually comes when some firewall between client and server is blocking the ports used by VPN tunnel.
so to allow IKEv2 traffic, please make sure to configure the network firewall to open UDP ports 500 and 4500, and to allow IP protocol 50.
If that is not possible, deploy SSTP based VPN tunnel on both VPN server and VPN client – that allows VPN connection across firewalls, web proxies and NAT
You can refer to this blog
http://blogs.technet.com/b/rrasblog/archive/2006/06/14/which-ports-to-unblock-for-vpn-traffic-to-pass-through.aspx
Regards
Yolanda
TechNet Community Support

Labview w/ WebCam and Remote Access through the Web project

Similar Messages

Maybe you are looking for