Required = true, but Javascript alert boxes Does Not fire ?

Hi,
On my ADF Form (af:form), I have set my attribute : required = true on the adf faces page. (on the entity object, mandatory = true)
But when I press Submit, I do not get any Javascript alert boxes fired, instead, I just see server side validation error.
Why the Javascript alert boxes does not get fired ?
Where is the setting ?
Thank you for your help,
xtanto

Hi Frank,
I use JDev 10.1.3.1 and it does not work.
Yes , the required field similar to #{bindings.ManagerId.mandatory}
I even try to change it to 'true', still no Java script alert, just the server side error.
What is the possibility ?
Thank you,
xtanto

Similar Messages

  • TS3212 i tried doing this many times but the run box does not show up. ill click download but it just skips right to thank you for downloading, then i go look and itunes is nkot downloaded. i think i need the 32 bit or whatever but i cant find it.

    help

    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,
    David

  • When my Firefox language settings are fr_fr or fr_ca Firefox does not display the e with acute accent character correctly when it is displayed in a javascript alert box. However, it does display it correctly when my language settings are just fr. Please t

    Firefox does not display the e with acute accent character correctly from a javascript alert box when my browser language settings are fr_ca or fr_fr. However, it does it correctly when my browser language setting is fr. How do i get it to display e with acute accent and other iso8859 characters correctly in a javascript alert box when my browser language settings are fr_fr and fr_ca?
    == This happened ==
    Every time Firefox opened

    Use Unicode (UTF-8) for those characters.
    Then you will always be sure that they are displayed correctly.

  • Mapquest sign in box does not appear in Firefox but does in Internet Explorer. Why? Have disabled add ons but no luck.

    The sign in box does not show up on Mapquest when I use Firefox. If I use Internet Explorer, the sign in box appears. I disabled the Firefox add-ons thinking there might be a conflict but no luck. Mapquest support is at a dead end, too, especially with it working in IE but not in Firefox. Suggestions?

    Can you post a link to that login page or is this a pop-up window?

  • HT1267 IPhone4..Model MC603C/Ser#850441XGXA4S: I have update to 5.1.1. I am not alerted to my emails unless I tap on the mail app. Then the alert/banner appears. When I start up, the alert sounds but after that it does not work. Whats wrong?

    Ever since I updating my IPhone 4 to 5.1.1. my alert/banner does not work with my mail app. Initial startup it works but after that, it does
    not work. The only way I know there is a message by tapping on the mail app and then I hear the alert and the banner shows up. Prior
    to updating, it always worked. Is there a 'bug' in the system or is there something I am missing here.

    Yeah this was my first time connecting my phone to the computer since I went to iOS 5.0 and iCloud, so I wasn't familiar with the fact that it did not automatically create a backup on iTunes during the Sync process.  Should have right-clicked on the phone device and did a manual backup.
    But still, after restoring the backup from iCloud, I don't understand why data from certain apps got hosed (anything before October 2011, which was my last iTunes backup), while other apps' data appears to be fully intact.

  • My search box does not display suggestions even though it is set to (it displays past searches, but not suggestions). I have looked at the FAQs and everything is set for it to show suggestions.

    My search box does not show suggestions although it is set to show suggestions.

    MMS is a carrier issue... contact Verizon and ensure your account is provisioned correctly.  I would think that someone would be intelligent enough to do that before buying a new device, but......
    iMessage could be an activation issue or a network issue.
    Have you tried Settings > General > Reset > Reset Network Settings?
    Does iMessage work consistently on Wi-Fi?

  • Encryption is required to connect to this server but the client library does not support encryption

    Hi ,guys
    I came cross a trouble when I configured connection encryption.
    I met the following problem when I have configured connection encryption done.
    Encryption is required to connect to this server but the client library does not support encryption; the connection has been closed. Please upgrade your client library. [client: ip]
    environment info:
    SQL:SQL2008 \SQL2005\SQL2008R2
    SERVER:WIN2003 \WIN2008R2
    We use C# to develop asp.net webform app, so the provider I use should be SQL client.
    client .NET Framework version:NET Framework 3.5
    Pls tell me why I met this weird problem.
    Thanks in advance.
    Love SQL

    Sure,here is the connetion string of java app.
    jdbc
    db.url=jdbc:jtds:sqlserver://60.x.x.x./TaskSiteInfo
    db.username=xxx
    db.pwd=xxx
    Your initial post stated you were using SqlClient in an ASP.NET 3.5 app.  I think this is an issue with the jTDS client based on the error message.  Are you using the latest jTDS driver?  If so, try posting this issue to
    http://sourceforge.net/p/jtds/discussion/
    Dan Guzman, SQL Server MVP, http://www.dbdelta.com

  • Javascript alert boxes are wrapped in Windows 7 with IE 8

    I can't count the number of JavaScript alert boxes I have throughout my systems and they have always made the transition between IE browsers from 6 to 8 without a hitch.  Without a hitch until I setup my first Windows 7 machine.  It is a 64 system that has both 32 & 64 bit IE browsers.
    It doesn't matter which of the two versions I use, the JavaScript messages that I have so carefully crafted with just the proper layout are now wrapped.  The resultant text in the new W7 popups is almost unintelligible because it is so badly scrambled/wrapped on the new white background.
    Since an alert box is simplicty itself, there is no way that I can think of to change the inherent size of the box.
    Has anyone else notice this phenomena???   If so, do you have a way around it short of redoing all of the text in the effected boxes???
    Len
    XP machine's JavaScript Alert popup in IE 8
    W7 machine's JavaScript Alert popup in IE 8 with wrapped text

    HMM I have the same problem. My researches suggest that the Zone.Identifier ADS is still being used for the internet zone, but not the Intranet zone. I too can get an intranet location out of IE, but not by querying Zone.Identifier eg using Powershell. This
    issue is present in XP as well as Win 7. It appears to extend to trusted zone ids.
    One hypothesis is that this is being stored in hidden form to prevent zone ids that decrease security being applied by malware.
    I had thought that maybe the intranet zone id was only present during download - but your experiment suggests otherwise.

  • SAP PI Message Cancellation Alert - Message does not have restartable error status

    Hello SCNers
    Version: 7.1
    Scenario: File --> PI -->SOAP
    We have a situation where a PI message  in Integration Engine shows error status.We want to cancel the message in IE but are unable to do so.
    On clicking Cancel for this message in SXMB_MONI, we are receiving an alert "Message does not have restartable error status".
    In SXMSPMAST table, value for ITFACTION is DEL.
    We do not want to run report RSXMB_DEL_TO_ARCH, that would change status of all messages with DEL status to ARCH.
    Is there a way to Cancel or Change the Status of this single message?
    Regards
    Sudheer

    Hi Hareesh,
    Tried that too, but to no avail.
    Strangely, the log shows NO_ERROR_STATE for the cancelation of this message thru RSXMB_CANCEL_MESSAGES.
    But in SXMSPMAST table the status of this message is 14 (System Error - Manual Restart Possible).
    Regards
    Sudheer

  • Getting Error message ""This set top box does not match the account settings"

    Just ordered a new wireless receiver for the bedroom. Installed it and now getting the following error "This set top box does not match the account settings". Service was suppose to be enabled on Monday the 4th, but I recieved the hardware early and turned it on. I've since rebooted and unplugged and tried everything to no avail. Any thoughts on how I might get this to work? Regards,  Rick

    your wireless receiver is misconfigured (dirty) and need to be scrubbed clean.
    A tech (service visit) or tier 2 rep (phone or chat) can do this. The receiver needs to be unplugged, on the bottom of receiver is a GUI (long number) that will be needed to identify receiver, when instructed plug just the receiver in that gave number for, when that one is connected.
    Your choice 4 hour appointment window, or time on phone , or chat.
    If these have not been activated yet.... When screen comes up, depress OK on receiver, depress button on WAP, when the screen at receiver says try again, Depress OK button (remote or on stb) another screen for update, depress OK give about 10 minutes to load, reboot when checking depress menu to verify recordings, if no recordings menu not finished booting.
    Set aspect ratio MENU, OPTIONS, etc.
    should take about 20 minutes per receiver.

  • MacOSX (10.9): Print dialogue box does not appear when printing PDF's

    Hi there,
    I've been having some troubles with the latest version of Adobe Reader on an intel-based MacBook Pro running MacOSX 10.9 (Mavericks).
    Environment Details:
    Device type: MacBook Pro
    OSX: 10.9 (Mavericks)
    Adobe Reader version: 11.0.06
    Details:
    After installing Reader 11.0.06, the print dialogue box does not appear through the print button or through File -> Print... . As a result, I simply cannot print PDF documents when using Adobe Reader.
    - Only 1 MacBook Pro affected
    - The print dialogue box does appear for other application (i.e. Preview, Word, Excel, etc., etc.)
    - Multiple restarts performed
    - Attempted to download older versions with no success
    - Attempted multiple uninstall/reinstalls
    - Reset the CUPS printing system multiple times
    - Validated that the account accessing/using Reader has full administrative privileges to the Adobe Reader application
    - Occurs for multiple PDF's from various sources
      -> Online source
      -> Converted from Word
    Additionally (I'm unsure if this is related or not), but after trying to perform an update, I receive the following error:
    An unimplemented or obsolete function was called
    Any help would be greatly appreciated.
    Cheers!

    Hi there,
    Just bumping this thread for more visibility.
    If anyone has any thoughts, I'd more than appreciate your advice!
    Cheers!

  • Javascript alert box due to inactivity

    Can anyone give me an example how to use javascript to display an alert box after a certain time of inactivity?

    After drag it is not going to "String name=request.getParameter("fname")".....i
    debugged and confirmed this.
    A similar issue was reported in IE9 also. Please find the link for more details
    https://connect.microsoft.com/IE/feedback/details/793230/javascript-alert-box-duplicated-if-moved-ie-9

  • How to give a javascript alert befor doing any insert or update

    Hi,
    Is there any way to give a javascript alert befor doing any insert or update? I want to use default insert/update button.
    Thank you
    Sumita

    just add:
    alert('Updating Record...');
    in the onClick event field for the UPDATE_TOP/UPDATE_BOTTOM button.
    You can do the same for the INSERT_TOP/INSERT_BOTTOM button. Adding javascript code in the event fields will not supersede the default PL/SQL events assigned to those buttons, unless you specifically remove the PL/SQL code (e.g. doUpdate;)..

  • Filechooser box does not appear

    I have made an installer using izpack. Somewhere in the installation process a user are to press a button and locate a directory using an izpack filechoose.
    This has been working fine for some time now but all the sudden this filechooser box does not appear and the path needs to be manually typed.
    Any ideas on what might prevent a filechooser box from appearing?

    When I run the same .jar file on another machine it works fine. So I don't think the error is related to the izpack installer. I have tried reinstalling the java jdk but that does not help. Any ideas on what "outside" izpack that might cause this?

  • I can not print web pages,print box does not appear . I can print web pages using IE

    Windows 7. Firefox 5.0 I can not print web pages. After clicking PRINT the print dialog box does not appear and nothing prints. I do not have this problem using IE
    Printer: Brothers HL-5140
    Thank you,
    Syd

    First of all, update Firefox to 3.6.17 via Help | Check For Updates.
    There was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
    To uninstall the Yahoo Toolbar, go to Tools | Add-ons | Extensions. You should find it in there.
    To revert to Google as your preferred search engine, please do the following.
    * In the location bar, type '''about:config''' and hit Enter.
    * In the filter at the top, type: '''keyword.URL'''
    * Double click it and remove whatever's in there and replace it with http://www.google.com/search?q=
    The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.
    '''To reset your home page, do the following'''.
    * Go to the site you want to set as your homepage.
    * Go to '''Tools '''| '''Options '''| '''General'''
    * Make sure it says "''Show My Homepage''" in the first dropdown menu.
    * Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.
    After you complete the above steps, install this add-on to prevent another search engine from modifying your preferences: https://addons.mozilla.org/en-US/firefox/addon/browserprotect/
    Additonal security risks on your system are the version of Flash you have installed at the moment. See http://www.adobe.com/support/security/bulletins/apsb11-12.html
    Update via http://get.adobe.com/flashplayer/
    Printing issues might be fixed by installing Java via http://www.java.com/en/
    But if the problem persists, please post again.

Maybe you are looking for