Required User Exit Or Badi.

Hi Friends,
I am searching for the user exit or Badi .
The scenario is:- First i create a Purchase Requisition
in ME51N. After creating the PR, the transaction ME59 is run which automatically creates Purchase order from the PR. The automatic creation of PO from PR is done by the user exit or Badi.
Please tell me the Badi or user exit.
Points will given to useful response.
Regards,
Mandeep.

Hi Mandeep, this is BADI for ME51N.
report ZUDAY_BDC_TCL1 no standard page heading line-size 255.
include bdcrecx1.
TABLES EBAN.
DATA: BEGIN OF ITAB OCCURS 0,
NUMBER(3) TYPE C,
MATNR LIKE EBAN-MATNR,
TXZ01 LIKE EBAN-TXZ01,
MENGE(13) TYPE C,
MEINS LIKE EBAN-MEINS,
EEIND TYPE RM06B-EEIND,
EKGRP LIKE EBAN-EKGRP,
MATKL LIKE EBAN-MATKL,
WERKS(4) TYPE C,
END OF ITAB.
DATA: LVALUE TYPE I,
COUNT TYPE I,
TEMP(20) TYPE C,
CTRL TYPE I,
CTRL1(3) TYPE C,
PAGES(5) TYPE c VALUE '10',
PVALUE(3) TYPE C VALUE 0.
start-of-selection.
PERFORM GETDATA.
SORT ITAB BY NUMBER.
perform open_group.
LOOP AT ITAB.
IF ITAB-NUMBER <> LVALUE.
COUNT = 0.
perform bdc_dynpro using 'SAPMM06B' '0100'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-BSART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'EBAN-BSART'
'NB'.
perform bdc_field using 'RM06B-LPEIN'
'T'.
perform bdc_field using 'EBAN-EKGRP'
'008'.
perform bdc_dynpro using 'SAPMM06B' '0106'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-MATNR(01)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
PAGES = 10.
CTRL = 0.
LOOP AT ITAB WHERE NUMBER = ITAB-NUMBER.
CTRL = CTRL + 1.
IF CTRL >= 19.
PAGES = PAGES + 10.
ENDIF.
CTRL1 = CTRL.
IF CTRL >= 19.
CTRL1 = '19'.
ENDIF.
IF CTRL >= 10.
PVALUE = ''.
ENDIF.
perform bdc_field using 'RM06B-BNFPO'
PAGES.
Concatenate 'EBAN-MATNR(' PVALUE CTRL1 ')' into Temp.
CONDENSE Temp NO-GAPS.
perform bdc_field using Temp itab-MATNR.
Concatenate 'EBAN-TXZ01(' PVALUE CTRL1 ')' into Temp.
CONDENSE Temp NO-GAPS.
perform bdc_field using Temp itab-TXZ01.
Concatenate 'EBAN-MENGE(' PVALUE CTRL1 ')' into Temp.
CONDENSE Temp NO-GAPS.
perform bdc_field using Temp itab-MENGE.
Concatenate 'EBAN-MEINS(' PVALUE CTRL1 ')' into Temp.
CONDENSE Temp NO-GAPS.
perform bdc_field using Temp itab-MEINS.
Concatenate 'RM06B-EEIND(' PVALUE CTRL1 ')' into Temp.
CONDENSE Temp NO-GAPS.
perform bdc_field using Temp itab-EEIND.
Concatenate 'EBAN-EKGRP(' PVALUE CTRL1 ')' into Temp.
CONDENSE Temp NO-GAPS.
perform bdc_field using Temp itab-EKGRP.
Concatenate 'EBAN-MATKL(' PVALUE CTRL1 ')' into Temp.
CONDENSE Temp NO-GAPS.
perform bdc_field using Temp itab-MATKL.
Concatenate 'EBAN-WERKS(' PVALUE CTRL1 ')' into Temp.
CONDENSE Temp NO-GAPS.
perform bdc_field using Temp itab-WERKS.
perform bdc_dynpro using 'SAPMM06B' '0102'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-MENGE'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'EBAN-TXZ01'
ITAB-TXZ01. "'HD GLAD BOY tank silver'.
perform bdc_field using 'EBAN-MENGE'
ITAB-MENGE. "'500'.
perform bdc_field using 'RM06B-EEIND'
ITAB-EEIND."'27.06.2007'.
perform bdc_field using 'EBAN-EKGRP'
ITAB-EKGRP. "'001'.
perform bdc_field using 'EBAN-BADAT'
'15.06.2007'.
perform bdc_field using 'EBAN-FRGDT'
'26.06.2007'.
perform bdc_field using 'EBAN-PREIS'
'55.48'.
perform bdc_field using 'EBAN-WAERS'
'GBP'.
perform bdc_field using 'EBAN-PEINH'
'1'.
perform bdc_field using 'EBAN-REPOS'
'X'.
perform bdc_dynpro using 'SAPMM06B' '0106'.
Concatenate 'ElBAN-MATNR(' PVALUE CTRL1 ')' into Temp.
CONDENSE Temp NO-GAPS.
perform bdc_field using 'BDC_CURSOR' Temp.
perform bdc_field using 'BDC_OKCODE'
'/00'.
ENDLOOP.
LVALUE = ITAB-NUMBER.
perform bdc_dynpro using 'SAPMM06B' '0106'.
perform bdc_field using 'BDC_CURSOR'
'RM06B-BNFPO'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'RM06B-BNFPO'
'80'.
*AT END OF NUMBER.
perform bdc_transaction using 'ME51'.
REFRESH BDCDATA.
*ENDAT.
ENDIF.
ENDLOOP.
perform close_group.
*& Form GETDATA
text
--> p1 text
<-- p2 text
FORM GETDATA .
CALL FUNCTION 'UPLOAD'
EXPORTING
FILENAME = ' '
FILETYPE = ' '
TABLES
DATA_TAB = ITAB
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GETDATA.
kindly reward if found helpful.
cheers,
Hema.

Similar Messages

User Exit or BADI in APO to change sales order relevant data while CIF

Hi Everyone,
I require User exit or BADI at APO side to change customer field kunnr of sales order after it enters APO through CIF.
My requirement is to replace KUNNR field with KDGRP field of sales order.
The data will pass through CIF in APO.
Is there any user exit or BADI for the same?
Sample code will be of great help.
Regards,
Kashyap.

Hi ,
Resolved myself.
customer exit APOCF010
Regards,
Kashyap

User-Exit or BADI required for F-28

Hi All,
Can anyone give me any user-exit or BADI to update BSAD-VBELN when posting open items using txn F-28.
regards
Ajay

Hi,
Use BTE 1120 for this. But when you clear open items and you clear more than one invoice line items in one go.. then it will create issue.
We had used this once but we had restriced by way of code that not more than one RV document can be selected and this worked..
Regards,
SAPFICO.

F110 - Automatic Payment (User Exit, BTE, BADI)

I have requirement after generating payment document by F110 automatic payment. I need to send data to other system.
How to get all payment documents? Can I use a BTE, User Exit or BADI? Kindly help me.

Hi ,
You can create a DMEE or genrate Idoc to another system .
If you want to send excel file then you can create a dmee file in transaction DMEE with same formt provided by bank/ another system .
many Thanks

User Exit or BADI for Material,BOM,Customer,Vendor

Dear All,
I have requirement where if User A changes a Material X .It should go for approval by workflow.
When the Material X is waiting for approval no other User should be able to change the material .It should give him a message
and restrict him from changing the Material.
Is there any User Exit or BADI to restrict him from changing the material. The exit or BADI should be called as soon as the Material is entered in MM02.
I need exit or BADI for BOM, Vendor and Customer also.
Thank you.

Hi,
You can go to Transaction SE80 and check in Function Group MATF. There have been two User Exits which are called during MM02 Transaction execution (via Analysis Transaction SE30) - MATERIAL_FIELD_SELECTION_NEW and MATERIAL_FIELD_SELECTION_COMB.
BAdI called by FM MATERIAL_FIELD_SELECTION_NEW.
Thanks and Regards,
Prabhakar Dharmala

User exit or BADI for Tcode ME51N

Hi All,
My requirement is i need to check available quantity at the time of Purchase req creation. If PR quantity is available in stock then it should not allow to create new PR.
Is there any user exit or Badi for this requirement. Kindly send me.
Regards,
Paras

Hai,
User Exit: MEREQ001
Function exit             EXIT_SAPLMEREQ_001
                               EXIT_SAPLMEREQ_002
                               EXIT_SAPLMEREQ_003
                               EXIT_SAPLMEREQ_004
                               EXIT_SAPLMEREQ_005
                               EXIT_SAPLMEREQ_006
                               EXIT_SAPLMEREQ_007
                               EXIT_SAPLMEREQ_008
                               EXIT_SAPLMEREQ_009
                               EXIT_SAPLMEREQ_010
Screen exit               SAPLMEGUI
Include tables           CI_EBANDB
                               CI_EBANMEM

User exit or badi for me52n transaction.

Hi all,
i have a requirement to write a user exit or badi for me52n transaction. the requirement is in header section, only one plant should be accepted. that is in the first row one plant will be inserted. in the second row if we are inserting another plant other the first row plant, it should not accept it and it should raise an error.
that is from the second row onwards, every plant should match with the first row plant.
if any part of this issue is unclear, plz let me know so that i can explain it clearly
this is urgent requirement.
please let me know the solution as soon as possible.
points will be awarded.
thanking u in advance.
A.srinivas.

In this version exit EXIT_SAPLMEREQ_005 should exists (look at OSS <a href="https://service.sap.com/sap/support/notes/843446">Note 843446 - MEREQ001: Cannot call up external service data in user exit</a> this note refers to the exit and is applicable in 4.70. Look also at OSS <a href="https://service.sap.com/sap/support/notes/310154">Note 310154 - ME21N/ME51N: Customer-specific check, generating error log</a>
Regards

User Exit or Badi for CN22

Hi All
Can anyone tell me an user exit or badi for Tcode CN22 which gets triggered when i save a network.
whenever i make changes in the WBS assignment of the network in the activity level then the i need to copy dates to other networks whenever a change in WBS element is done. Please treat this as pretty urgent
Thanks
Sowjanya

Hello,
Please check and see if the BADI
"AFABD_CHANGE" suits your requirement
it has
AFABD
Network: Dialog table for AFA
as a changable parameter....
and import parameter as
CAUFVD
Dialog Structure for Order Headers and Items
Reward if helpful
Regards
Byju

User Exit OR Badi for MK01 transaction (used for saving vendor amster data)

Hi All,
I have a requirement where I have to call my workflow, when we create the Vendor using my custom transaction (ZMK01, which is a copy of standard transaction MK01).
For Workflow triggering I am using FM 'SAP_WAPI_CREATE_EVENT' in the user exit 'EXIT_SAPMF02K_001' but this is only for checking the data on saving Vendor Master.
So I want to use FM 'SAP_WAPI_CREATE_EVENT' at right place. For that , I need User-Exit or BADI which is used for saving vendor master data.
Could anyone please help me to find out the user exit or BADI for save event of vendor master data using transaction MK01.
Looking forward to your advise and thanks in advance.
Best Regards,
Mamta

Hi ,
I forgot to activiate the project linked with User exit 'EXIT_SAPMF02K_001' .
so problem is solved now
Thanks,
Mamta

User exit or BADI for recruitment

Hi,
I am new to HCM, can you give me user exit or badi for recruitment.
Requirement - i have developed an infotype which i am updating through BSP, while the custom infotype is updated it should simultaneously update some of my Z tables. Hoping for positve replies earliest.
Thanks in advance:-
Santosh

Hi,
InfotypeThe data fields of HR master data, time management and recruitment are grouped logically into information types or infotypes for short.
Examples of infotypes are "Family/Related Person", "Organizational Assignment, "Basic Pay".
The following naming conventions apply to infotypes:
Infotypes 0000 to 0999 are used for HR master data
and sometimes for applicant data
Infotypes 1000 - 1999 for organizational management
Infotypes 2000 - 2999 for time data
Infotypes 4000 - 4999 for applicant data
Infotypes 9000 - 9999 for customers
Function character of step
This controls for which types of processing (create, change and/or delete a data record) a dynamic action should be carried out.
The processing type is indicated by a two-digit numeric value. These values can be added up; in other words, you can enter several processing types for each infotype, subtype or field. A dynamic action can also be carried out independent of the current processing type.
00 for Independent of the current function carried out
02 for Change
04 for Create
06 for Change and create
08 for Delete
10 for Change and delete
12 for Create and delete
Examples
If you enter 06, an action is carried out if the specified infotype was created or changed.
If you enter 00, an action is carried out irrespective of whether the specified infotype was created, changed or deleted.
Variable function part
The variable function part, which depends on the indicator for step, can have the following meaning:
P - Plausibility checks
You can enter values for specific infotype fields. Field names must be entered in full. Literals and constants can serve as comparison values. These must be enclosed by inverted commas. Variables can also be used.
The old value of a field can be used for comparison; the field name must be preceded by PSAVE-.
If fields of other infotypes are used for comparison, these must be stored in the module pool of the current infotype.
The following comparison operators are supported:
= equal to,
< less than,
<= less than or equal to,
> greater than
>= greater than or equal to and
<> not equal to.
Consecutive checks must be linked by a logical AND. Logical OR links must also be indicated by a /X.
Note:
Note that all checks with OR links must have a /X.
If the result of the comparison operation is not "true", then the following commands (I, F, W etc.) are skipped over until a field is reached or a new comparison operation takes place.
Examples
Infotype Field ..... Ind. Variable function part
0007 STAT3 P P0007-STAT3='0'
0007 STAT3 P PSAVE-STAT3='1'
The step is taken if the value in the P0007-STAT3 field changes from 1 to 0.
0007 P P0013-KLKZ1<>'0'/X
0007 P P0013-ALVKZ<>'0'/X
0007 P P0013-RVKZ1<>'0'/X
0007 P P0013-RVNUM=SPACE
The first three conditions are linked by an OR; at least one of these conditions must be met. Condition 4 must always be met.
The step is taken if the following holds true:
P0013-KVKZ1 not equal to 0 or P0013-ALVKZ not equal to 0 or P0013-RVKZ1 not equal to 0, and P0013-RVNUM empty.
I - Maintain infotype record
Enter the step, infotype, subtype, object ID, start and end dates of the record and an indicator which defines whether the step is to be run in the background. The possible actions are INS, COP, MOD, and DEL.
Use commas to separate selection criteria just like the separator in the matchcode. If an entry is missing, the system inserts a comma.
Separate the indicator for suppressing dialog from other entries by a slash D (/D).
Constants, such as those for subtypes, are not enclosed in inverted commas.
Variable entries are also permitted. Fields containing such values must be put in brackets.
Examples:
Infotype Field .... Ind. Variable function part
 .... I INS,19,01/D
Step: Create a Dates record, subtype 01, run in the background
 .... I DEL,14,M559
Step: Delete Rec. Payments/Deds. record with subtype (wage type) M559.
0007 .... I INS,8,,,(P0007-BEGDA),(P0007-ENDDA)
Step: Create a Basic Pay record (0008) without subtype and object ID. The start and end dates are the same as those in the current Planned Working Time record (0007); specify these two fields only if they are filled because the dynamic action was triggered by this infotype.
W - Default values for new record
Literals or variables are used as default values.
Set the defaults for the infotype, subtype, object ID, start and end dates using an I step and not a W step.
Do not set defaults for Q fields of an infotype because the values for these fields are derived from the corresponding P fields.
Examples
Infotype Subtype ..... FC Ind. Variable function part
0021 2 04 I INS,0015,M430
0021 2 04 W P0015-BETRG='10000'
When a Family/Related Person record (0021) record with subtype 2 (child) is created, an Additional Payments record (0015) with a default amount of 100.00 is created.
V - Cross-reference to another step
Here, you can combine fields to groups. The variable function part contains the value in the field which follows the "field" column. Steps which are specified only for the following field are also triggered for each of the other fields.
Examples
Infotype Field ..... FC Ind. Variable function part
0016 PRBZH 06 V PRBZT
0016 PRBZT 06 I DEL,0019,01/D
Infotype 0019, subtype 01 is deleted in the background when the field PRBZT or PRBZH in infotype 0016 is changed or created (function code 06).
The following entries are equivalent:
0016 PRBZH 06 I DEL,0019,01/D
0016 PRBZT 06 I DEL,0019,01/D
F - Call a routine
You can call internal (module pool) as well as external routines.
If you call external routines, type the program name in brackets after the routine name. Do not specify 'using' parameters. When calling an external routine, all data must be declared in a common part. You can use the fields of structure RP50D to return values from the routine. These are not used in the standard system and can only be populated via the routine and then can be used for defaults (W-Commands).
This allows customer-specific routines to be formulated with all the above steps.
Example 1:
Infotype Field ..... Ind. Var.function part
0016 PRBZT F PROBATION
0016 PRBZT I INS,19,01
0016 PRBZT W P0019-VTRMN=PRBEND
Module pool MP001600 contains the PROBATION routine. This routine uses the entries in the fields P0016-PRBZT and P0016-PRBEH to determine the end of the probation period which it stores in the field PRBEND.
The system creates a new 'Dates' record with the reminder date = PRBEND.
Example 2:
Infotyp ..... Ind. Var. function part
0001 F GET_DATE(ZPUDYN01)
0001 I INS,19,01
0001 W P0019-VTRMN=RP50D-DATE1
The GET_DATE routine in program ZPUDYN01 calculates a date and enters this date in the RP50D-DATE1 field via "TABLES RP50D" in ZPUDYN01. This date can be user-defined in GET_DATE: if necessary, user-defined infotypes can be read afterwards.
M - Send a mail
Enter the name of the feature which defines the characteristics of the mail.
Example
Infotype Field ..... Ind. Var.function part
0001 SACHP M M0001
A mail is sent when the field SACHP is changed. The characteristics of the mail are defined in feature M0001.
In the standard system, feature M0001 is provided as a model. The documentation on feature M0001 explains how to define the characteristics of a mail.
ADDITIONAL HINTS
If you use a date as a constant, enter it as YYYYMMDD (YYYY=year, MM=month, DD=day).
The table strings T001P, T503 and PSPAR are filled with the values which are valid on the record start date.
The old values of the infotype are stored in the field string PSAVE. The structure of this string is the same as the Pnnnn structure (nnnn=infotype). The structure is filled with (valid) values only when the delete, change and create functions are used.
Please read Create dynamic actions in the Implementation Guide.
Regards
Bernd

User Exit or BADI for MIGO on entry of inbound delivery number

Hi all,
I want a user exit or BADI for MIGO, my requirement is that whenever a user enters an inbound delivery number and presses enter in MIGO the exit should get fired.
Please help, if someone knows.
Thanks and Regards,
Mohammed.

hi
you can try out various BADI'S-
MB_MIGO_BADI
MB_MIGO_ITEM_BADI
Helpful function modules:-
MIGO_BADI_EXAMPLE
MIGO_BADI_EXAMPLE_GET_DATA
MIGO_BADI_EXAMPLE_GET_HEADER
MIGO_BADI_EXAMPLE_PUT_DATA
MIGO_BADI_EXAMPLE_PUT_HEADER
MIGO_BADI_EXAMPLE_UPATE_DATA
MIGO_BADI_EXAMPLE_UPDATE_HEAD
I hope at least one of these helps.
regards
Aakash

USER EXIT or BADI for Vendor field in MIRO

Hi Experts,
In MIRO transaction vendor field gets defaulted from Purchase Order. So my requirement is to changes that vendor with alternate payee.
To replace the vendor with alternate payee I need the USER EXIT or BADI, kindly help me on this will be useful for us.
Thanks in Advance.
SAP Consultant

Transaction Code - MIGO Goods Movement
Exit Name Description
MBCF0002 Customer function exit: Segment text in material do
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Ma
No of Exits: 8
BAPI-step by step procedure
http://www.sapgenie.com/abap/bapi/example.htm
list of all BAPI's
http://www.planetsap.com/LIST_ALL_BAPIs.htm
Rewards if useful.................
Minal

User exit or BAdi for field update in ECC system for SUS supplier

Dear Guru's,
I am configuring MM-SUS scenario in our srm 7.01 scenario. Not all vendors of our client are going to be SUS vendors. For SUS vendors, the client will be using Purchase Order Acknowledgement and Advanced Shipping Notification key. I am thinking of configuring a confirmation control key which will incoporate requirement of PO acknowledgement and Inbound delivery document. The assignment of confirmation control key and PO Acknowledgement Required checkbox in the vendor master record will default it in the purchase order.
Now, the question is how to update the existing vendor master data record which will be SUS vendor. I am looking at a solution like user exit or BAdi which updates the confirmation control key and purchase order acknowledgement required check box when the client manually assigns the class 'Z_CRED_SUSMM' to the ERMS vendor master.
Could you please help me to find the required exit or BAdi?
Thanks and regards,
Ranjan
Ranjan Sutradhar

EXIT_SAPMF02K_001 definitely wont work as this is for custom checks. this does not update data in vendor master.
you can try using below method of VENDOR_ADD_DATA badi.
IF_EX_VENDOR_ADD_DATA~PRESET_VALUES_PORG
but you need to read the screen field for classification and then according to that i think you can change the LFM1 data inside this badi

User exit or BADI for purchase order

Hi,
I want send outbound IDOC for purchase order to 3rd party integration system.
It is too hard to map between standard purchase order IDOC and business object of 3rd party system because the structure of standard purchase order IDOC is so complicated.
So I want bring purchase order data into CBO table when purchase order is created or released. And this data will be inserted CBO IDOC for more simple structure than standard one.
I'm trying to find some of user exit or BADI to insert from standard purchase order to CBO table in the time of purchase order is created or released.
And I'm trying to find another way using message type.
As far as I know it is possible to set sending IDOC in the purchase order message type setting in IMG.
Is anyone who has related situation or know the way to do this?

Hi,
I have similar requirement, however the BADI name you mentioned does not exist.
Pls let me know the right one.
Thanks,
Dipak

User Exit or BADI for Blocking process orders from R/3 to APO?

Dear Experts,
I am looking for a user exit or badi to block the process orders from R/3 to APO. As per standard it is not transferring orders which are clsd(closed status). Means that it is not updating live cache but its reading from R3.
We are facing some problems in cif queues which are not correctly maintained in R3 side. We dont want to touch those orders bcoz its very old data which is not required for planning.
There will be huge data which needs to be deleted while transferring through cif.
Please give any user exit (outbound intial transfer) from R/3.
Or any sugg. I apprecite your inputs...
Thanks
Cris

Hi Cris,
You can use user exit APOCF004 - Inbound Processing: Production Order/Planned Order in APO to prevent orders coming to APO by deleting orders which are not intended to goto APO from internal tables IT_ORD and IT_OUT.
Hope this helps.
Best Regards,
Ramesh M

Required User Exit Or Badi.

Similar Messages

Maybe you are looking for