User Exit or BADI for MIGO on entry of inbound delivery number

Hi all,
I want a user exit or BADI for MIGO, my requirement is that whenever a user enters an inbound delivery number and presses enter in MIGO the exit should get fired.
Please help, if someone knows.
Thanks and Regards,
Mohammed.

hi
you can try out various BADI'S-
MB_MIGO_BADI
MB_MIGO_ITEM_BADI
Helpful function modules:-
MIGO_BADI_EXAMPLE
MIGO_BADI_EXAMPLE_GET_DATA
MIGO_BADI_EXAMPLE_GET_HEADER
MIGO_BADI_EXAMPLE_PUT_DATA
MIGO_BADI_EXAMPLE_PUT_HEADER
MIGO_BADI_EXAMPLE_UPATE_DATA
MIGO_BADI_EXAMPLE_UPDATE_HEAD
I hope at least one of these helps.
regards
Aakash

Similar Messages

BADI for VL31N which has the Inbound Delivery Number as a parameter.

Hi,
I have a requirement that after creation of a new inbound delivery through VL31N the control should go to a custom screen. The new inbound delivery no. generated thru VL31N should be seen in this custom screen.
I am searching for a user exit or BADI for VL31N. This exit should have the Inbound delivery Number created through VL31N.
I tried many exits and BADIs. However, none of them have the Inbound Delivery No.
Please help.
Regards,
Jaya

The issue was resolved by the use of the BADI 'DELIVERY_PUBLISH'. Its method PUBLISH_AFTER_SAVE was used.
IF sy-tcode = 'VL31N' OR sy-tcode = 'VL32N'.
 DATA : v_tcode TYPE sy-tcode .
 FIELD-SYMBOLS: <i_del> TYPE likp.
 DATA: wa_likp TYPE likp,
 t_likp TYPE STANDARD TABLE OF likp.
 ASSIGN ('(SAPMV50A)LIKP') TO <i_del>.
 wa_likp = <i_del> .
 SET PARAMETER ID 'VL' FIELD wa_likp-vbeln .
ENDIF.

User Exit or BADI for ml81n - Service Entry Sheet

Hi all,
I would like to find a user exit or BADI or enhancement upon saving.
The requirement is posting to specific GL A/C from the Service No. given.
Please don't provide me a list of unnecessary user exit or BADI.
Urgently need for solution, Thanks.

Hi,
Check out the various exits for ml81n
INTERFAC            Interface for data transfer
SRVDET              User screen on tab strip of service detail screen
SRVEDIT             Service list control (maintenance/display)
SRVENTRY            Unplanned part of entry sheet (obsolete since Rel. 3.1G)
SRVESI              Data conversion entry sheet interface
SRVESKN             Set account assignment in service line
SRVESLL             Service line checks
SRVESSR             Set entry sheet header data
SRVEUSCR            User screen on entry sheet tabstrip
SRVKNTTP            Setting the account assgnmt category when reading in, if
SRVLIMIT            Limit check
SRVMAIL1            Processing of mail before generation of sheet
SRVMSTLV            Conversion of data during importing of standard service c
SRVPOWEB            Purchase order for service entry in Web
SRVQUOT             Service export/import for inquiry/quotations
SRVREL              Changes to comm. structure for release of entry sheet
SRVSEL              Service selection from non-SAP systems
SRV_FRM             SRV: Formula calculation (obsolete since 4.0A!)

User exit or BADI for MIGO to Update a field in MSEG-KOSTL

Hi,
I want to update/change the KOSTL (Cost center) value before creating/posting the document.
Please let me know is there any user exits or BADI, which will export the MSEG structure.
Regards,
Ganesh

Hi
I believe there isn't a BADI or EXIT allows to change item data, I usually use the exit to change the item text EXIT_SAPMM07M_001 (the BADI MB_MIGO_ITEM_BADI should be the same thing) where I change the data by field-symbols:
FIELD-SYMBOLS: <KOSTL> TYPE MSEG-KOSTL.
ASSIGN '(SAPMM07M)MSEG-KOSTL' TO <KOSTL>.
<KOSTL> = .......
Max

USER EXIT or BADI for MIGO

Hi friends,
The Issue is:
User tries to execute Migo with 103 or 101 movement.
I want to throw an error if the posting date of the item is Before its original Delivery date in PO.
I tried exit MBCF0005 and applied 'break-point' but its not going to debugger..
Is there any other way i can overcome this issue ? BADI or any other Exit ?
I just don't want user to save the document by throwing Error MSG.
Regards
Snehal

Hi..
Enhancement/ Business Add-in            Description
Enhancement
MB_CF001                                Customer Function Exit in the Case of Updating a Mat. Doc.
MBCF0011                                Read from RESB and RKPF for print list in MB26
MBCF0010                                Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0009                                Filling the storage location field
MBCF0007                                Customer function exit: Updating a reservation
MBCF0006                                Customer function for WBS element
MBCF0005                                Material document item for goods receipt/issue slip
MBCF0002                                Customer function exit: Segment text in material doc. item
Business Add-in
MB_DOCUMENT_UPDATE                      BADI when updating material document: MSEG and MKPF
MB_DOC_BADI_INTERNAL                    BAdIs During Creation of a Material Document (SAP Internal)
MB_ME_CSGMT_BADI_SAP                    BAdI: Consignment Processing - Stock Transfer
MB_MIGO_ITEM_BADI                       BAdI in MIGO for Changing Item Data
MB_PHYSINV_INTERNAL                     Connection: Core Inventory and Retail AddOn
MB_QUAN_CHECK_BADI                      BAdI: Item Data at Time of Quantity Check
MB_RESERVATION_BADI                     MB21/MB22: Check and Complete Dialog Data
MB_RESERVATION_SCR                      Screen BAdI for Retrofit DFPS
MB_RESERVATION_UPCHD                    BAdI for Creation and Changing of Manual Reservations
MB_RES_BAPI_CHANGE                      BAdI: Execution of Changes to Reservation Fields
MB_RES_BAPI_CREATE1                     BAdI: Adoption of Customer's Own Fields as Reserv. Fields
MB_RES_BAPI_DETAIL1                     BAdI: Display of Customer's Own Fields in Reservations
MB_STOR_LOC_BADI_GTS                    BADI to Check and Change Storage Location (GTS Fct. Only)
MB_MIGO_BADI                            BAdI in MIGO for External Detail Subscreens
MB_DOCUMENT_BADI_SAP                    BADI for Creation and Changing of a Material Document
ARC_MM_EBAN_CHECK                       BAdI: Enhancement of Archivability Check (MM_EBAN)
ARC_MM_EBAN_PRECHECK                    BAdI: Enhancement of Archivability Check (MM_EBAN)
ARC_MM_EBAN_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EBAN)
ARC_MM_EINA_CHECK                       BAdI: Enhancement of Archivability Check (MM_EINA)
ARC_MM_EINA_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EINA)
ARC_MM_INVBEL_CHECK                     BAdI: Enhancement of Archivability Check (MM_INVBEL)
ARC_MM_INVBEL_WRITE                     BAdI: Enhancement of Scope of Archiving (MM_INVBEL)
ARC_MM_MATBEL_CHECK                     Prüfung ADD-ON-spezifischer Kriterien für MM_MATBEL
ARC_MM_MATBEL_WRITE                     Check Add-On-Specific Data for MM_MATBEL
MB_CHECK_LINE_BADI                      BAdI: Check Line Before Copying to the Blocking Tables
MB_CIN_LMBMBU04                         posting of gr
MB_CIN_MM07MFB7                         BAdI for India Version exit in include MM07MFB7
MB_CIN_MM07MFB7_QTY                     Proposal of quantity from Excise invoice in GR
MB_DOCUMENT_BADI                        BAdIs During Creation of a Material Document
No.of Exits:          8
No.of BADis:         29
Arunima

User exit or BADI for recruitment

Hi,
I am new to HCM, can you give me user exit or badi for recruitment.
Requirement - i have developed an infotype which i am updating through BSP, while the custom infotype is updated it should simultaneously update some of my Z tables. Hoping for positve replies earliest.
Thanks in advance:-
Santosh

Hi,
InfotypeThe data fields of HR master data, time management and recruitment are grouped logically into information types or infotypes for short.
Examples of infotypes are "Family/Related Person", "Organizational Assignment, "Basic Pay".
The following naming conventions apply to infotypes:
Infotypes 0000 to 0999 are used for HR master data
and sometimes for applicant data
Infotypes 1000 - 1999 for organizational management
Infotypes 2000 - 2999 for time data
Infotypes 4000 - 4999 for applicant data
Infotypes 9000 - 9999 for customers
Function character of step
This controls for which types of processing (create, change and/or delete a data record) a dynamic action should be carried out.
The processing type is indicated by a two-digit numeric value. These values can be added up; in other words, you can enter several processing types for each infotype, subtype or field. A dynamic action can also be carried out independent of the current processing type.
00 for Independent of the current function carried out
02 for Change
04 for Create
06 for Change and create
08 for Delete
10 for Change and delete
12 for Create and delete
Examples
If you enter 06, an action is carried out if the specified infotype was created or changed.
If you enter 00, an action is carried out irrespective of whether the specified infotype was created, changed or deleted.
Variable function part
The variable function part, which depends on the indicator for step, can have the following meaning:
P - Plausibility checks
You can enter values for specific infotype fields. Field names must be entered in full. Literals and constants can serve as comparison values. These must be enclosed by inverted commas. Variables can also be used.
The old value of a field can be used for comparison; the field name must be preceded by PSAVE-.
If fields of other infotypes are used for comparison, these must be stored in the module pool of the current infotype.
The following comparison operators are supported:
= equal to,
< less than,
<= less than or equal to,
> greater than
>= greater than or equal to and
<> not equal to.
Consecutive checks must be linked by a logical AND. Logical OR links must also be indicated by a /X.
Note:
Note that all checks with OR links must have a /X.
If the result of the comparison operation is not "true", then the following commands (I, F, W etc.) are skipped over until a field is reached or a new comparison operation takes place.
Examples
Infotype Field ..... Ind. Variable function part
0007 STAT3 P P0007-STAT3='0'
0007 STAT3 P PSAVE-STAT3='1'
The step is taken if the value in the P0007-STAT3 field changes from 1 to 0.
0007 P P0013-KLKZ1<>'0'/X
0007 P P0013-ALVKZ<>'0'/X
0007 P P0013-RVKZ1<>'0'/X
0007 P P0013-RVNUM=SPACE
The first three conditions are linked by an OR; at least one of these conditions must be met. Condition 4 must always be met.
The step is taken if the following holds true:
P0013-KVKZ1 not equal to 0 or P0013-ALVKZ not equal to 0 or P0013-RVKZ1 not equal to 0, and P0013-RVNUM empty.
I - Maintain infotype record
Enter the step, infotype, subtype, object ID, start and end dates of the record and an indicator which defines whether the step is to be run in the background. The possible actions are INS, COP, MOD, and DEL.
Use commas to separate selection criteria just like the separator in the matchcode. If an entry is missing, the system inserts a comma.
Separate the indicator for suppressing dialog from other entries by a slash D (/D).
Constants, such as those for subtypes, are not enclosed in inverted commas.
Variable entries are also permitted. Fields containing such values must be put in brackets.
Examples:
Infotype Field .... Ind. Variable function part
 .... I INS,19,01/D
Step: Create a Dates record, subtype 01, run in the background
 .... I DEL,14,M559
Step: Delete Rec. Payments/Deds. record with subtype (wage type) M559.
0007 .... I INS,8,,,(P0007-BEGDA),(P0007-ENDDA)
Step: Create a Basic Pay record (0008) without subtype and object ID. The start and end dates are the same as those in the current Planned Working Time record (0007); specify these two fields only if they are filled because the dynamic action was triggered by this infotype.
W - Default values for new record
Literals or variables are used as default values.
Set the defaults for the infotype, subtype, object ID, start and end dates using an I step and not a W step.
Do not set defaults for Q fields of an infotype because the values for these fields are derived from the corresponding P fields.
Examples
Infotype Subtype ..... FC Ind. Variable function part
0021 2 04 I INS,0015,M430
0021 2 04 W P0015-BETRG='10000'
When a Family/Related Person record (0021) record with subtype 2 (child) is created, an Additional Payments record (0015) with a default amount of 100.00 is created.
V - Cross-reference to another step
Here, you can combine fields to groups. The variable function part contains the value in the field which follows the "field" column. Steps which are specified only for the following field are also triggered for each of the other fields.
Examples
Infotype Field ..... FC Ind. Variable function part
0016 PRBZH 06 V PRBZT
0016 PRBZT 06 I DEL,0019,01/D
Infotype 0019, subtype 01 is deleted in the background when the field PRBZT or PRBZH in infotype 0016 is changed or created (function code 06).
The following entries are equivalent:
0016 PRBZH 06 I DEL,0019,01/D
0016 PRBZT 06 I DEL,0019,01/D
F - Call a routine
You can call internal (module pool) as well as external routines.
If you call external routines, type the program name in brackets after the routine name. Do not specify 'using' parameters. When calling an external routine, all data must be declared in a common part. You can use the fields of structure RP50D to return values from the routine. These are not used in the standard system and can only be populated via the routine and then can be used for defaults (W-Commands).
This allows customer-specific routines to be formulated with all the above steps.
Example 1:
Infotype Field ..... Ind. Var.function part
0016 PRBZT F PROBATION
0016 PRBZT I INS,19,01
0016 PRBZT W P0019-VTRMN=PRBEND
Module pool MP001600 contains the PROBATION routine. This routine uses the entries in the fields P0016-PRBZT and P0016-PRBEH to determine the end of the probation period which it stores in the field PRBEND.
The system creates a new 'Dates' record with the reminder date = PRBEND.
Example 2:
Infotyp ..... Ind. Var. function part
0001 F GET_DATE(ZPUDYN01)
0001 I INS,19,01
0001 W P0019-VTRMN=RP50D-DATE1
The GET_DATE routine in program ZPUDYN01 calculates a date and enters this date in the RP50D-DATE1 field via "TABLES RP50D" in ZPUDYN01. This date can be user-defined in GET_DATE: if necessary, user-defined infotypes can be read afterwards.
M - Send a mail
Enter the name of the feature which defines the characteristics of the mail.
Example
Infotype Field ..... Ind. Var.function part
0001 SACHP M M0001
A mail is sent when the field SACHP is changed. The characteristics of the mail are defined in feature M0001.
In the standard system, feature M0001 is provided as a model. The documentation on feature M0001 explains how to define the characteristics of a mail.
ADDITIONAL HINTS
If you use a date as a constant, enter it as YYYYMMDD (YYYY=year, MM=month, DD=day).
The table strings T001P, T503 and PSPAR are filled with the values which are valid on the record start date.
The old values of the infotype are stored in the field string PSAVE. The structure of this string is the same as the Pnnnn structure (nnnn=infotype). The structure is filled with (valid) values only when the delete, change and create functions are used.
Please read Create dynamic actions in the Implementation Guide.
Regards
Bernd

User Exit or Badi for MIRO

Hi
I need add some validations to data entry in MIRO for send their respective error messages and stop data saving.
Does somebody knows some User Exit or Badi for make validations in MIRO ?
Regards
Frank

Hi,
you can use badi MRM_HEADER_CHECK. In order to put error message you can use function module
PROT_FILL.
* If there is any error do not allow posting
 DATA: gt_errtab TYPE TABLE OF mrm_errprot,
 gs_errtab TYPE mrm_errprot.
 CONSTANTS: c_errprot(23) TYPE c VALUE '(SAPLMRMF)TAB_ERRPROT[]'.
 FIELD-SYMBOLS: <fs_errprotj_dt> TYPE table.
 ASSIGN (c_errprot) TO <fs_errprotj_dt>.
 REFRESH gt_errtab[].
 gt_errtab[] = <fs_errprotj_dt>[].
 IF NOT gt_errtab[] IS INITIAL.
 READ TABLE gt_errtab INTO gs_errtab WITH KEY msgty = 'E'.
 IF sy-subrc = 0.
 DATA: c_okqx(17) TYPE c VALUE '(SAPLMR1M)OK-CODE'.
 FIELD-SYMBOLS: <fs_okqx> TYPE ANY.
 ASSIGN (c_okqx) TO <fs_okqx>.
 CASE <fs_okqx>.
 WHEN 'BU'. "POST
* This is optional: you can either search for a particular message or
* do not allow any error message
* Here search for the message triggered in badi INVOICE UPDATE
 READ TABLE gt_errtab INTO gs_errtab WITH KEY msgty = 'E'
 msgid = 'ZXX' msgno = '030'.
 IF sy-subrc = 0.
 CLEAR <fs_okqx>.
 MESSAGE s030(zxx). "While errors exist document will not be posted
 ENDIF.
 ENDCASE.
 ENDIF.
 ENDIF.
This is used to give error message in case before posting the document.
KR Jaideep,

User exit or BADI for Tcode ME51N

Hi All,
My requirement is i need to check available quantity at the time of Purchase req creation. If PR quantity is available in stock then it should not allow to create new PR.
Is there any user exit or Badi for this requirement. Kindly send me.
Regards,
Paras

Hai,
User Exit: MEREQ001
Function exit             EXIT_SAPLMEREQ_001
                               EXIT_SAPLMEREQ_002
                               EXIT_SAPLMEREQ_003
                               EXIT_SAPLMEREQ_004
                               EXIT_SAPLMEREQ_005
                               EXIT_SAPLMEREQ_006
                               EXIT_SAPLMEREQ_007
                               EXIT_SAPLMEREQ_008
                               EXIT_SAPLMEREQ_009
                               EXIT_SAPLMEREQ_010
Screen exit               SAPLMEGUI
Include tables           CI_EBANDB
                               CI_EBANMEM

User exit or badi for me52n transaction.

Hi all,
i have a requirement to write a user exit or badi for me52n transaction. the requirement is in header section, only one plant should be accepted. that is in the first row one plant will be inserted. in the second row if we are inserting another plant other the first row plant, it should not accept it and it should raise an error.
that is from the second row onwards, every plant should match with the first row plant.
if any part of this issue is unclear, plz let me know so that i can explain it clearly
this is urgent requirement.
please let me know the solution as soon as possible.
points will be awarded.
thanking u in advance.
A.srinivas.

In this version exit EXIT_SAPLMEREQ_005 should exists (look at OSS <a href="https://service.sap.com/sap/support/notes/843446">Note 843446 - MEREQ001: Cannot call up external service data in user exit</a> this note refers to the exit and is applicable in 4.70. Look also at OSS <a href="https://service.sap.com/sap/support/notes/310154">Note 310154 - ME21N/ME51N: Customer-specific check, generating error log</a>
Regards

User Exit or Badi for CN22

Hi All
Can anyone tell me an user exit or badi for Tcode CN22 which gets triggered when i save a network.
whenever i make changes in the WBS assignment of the network in the activity level then the i need to copy dates to other networks whenever a change in WBS element is done. Please treat this as pretty urgent
Thanks
Sowjanya

Hello,
Please check and see if the BADI
"AFABD_CHANGE" suits your requirement
it has
AFABD
Network: Dialog table for AFA
as a changable parameter....
and import parameter as
CAUFVD
Dialog Structure for Order Headers and Items
Reward if helpful
Regards
Byju

User exit or BADI for ME22N

Hi,
I need a user exit or Badi for defaulting Plant at line item level.
The scenario goes like this: when ever user tries to change an existing Purchase order and tries to add a new line item in it, I need to trigger USEREXIT or BADI , so that it reads the previous line Plant and updates the current line with the same plant.
I tried with user exit MM06E005 but it didnt seem to work.
Can any one please help me?
I am new to BADI, so I am not sure how to find the BADI and use it. It would be great if anyone can help me i this.
Thanks
Ramya

Hello
The BAdI ME_PROCESS_PO_CUST is the right one. The method PROCESS_ITEM should be triggered whenever the user changes something in the purchase order at item level and executes any kind of function (e.g. ENTER, CHECK or SAVE).
However, instead of overwriting the user input via the BAdI you should implement method CHECK ( Closing Check ) where you can validate the user input. If any of your validation fails you can send an error message and set CHANGING parameter CH_FAILED = 'X'. This approach is much more transparent for the user.
NOTE: In order to "send" an error message you need to add the include mm_messages_mac to your implementing class. For an example see class CL_EXM_IM_ME_PROCESS_PO_CUST (should be available on ERP 6.0):
METHOD if_ex_me_process_po_cust~process_item .
DATA: ls_mepoitem TYPE mepoitem,
        ls_customer TYPE mepo_badi_exampl,
        ls_tbsg     TYPE tbsg.
INCLUDE mm_messages_mac. "useful macros for message handling
* here we check customers data
ls_mepoitem = im_item->get_data( ).
IF ls_mepoitem-loekz EQ 'D'.
* check field badi_afnam
    IF ls_customer-badi_afnam IS INITIAL.
      mmpur_metafield mmmfd_cust_02.
      mmpur_message_forced 'W' 'ME' '083' text-003 '' '' ''.
    ENDIF.
ENDIF.
ENDMETHOD.                    "IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM
Regards
Uwe

User Exit OR Badi for MK01 transaction (used for saving vendor amster data)

Hi All,
I have a requirement where I have to call my workflow, when we create the Vendor using my custom transaction (ZMK01, which is a copy of standard transaction MK01).
For Workflow triggering I am using FM 'SAP_WAPI_CREATE_EVENT' in the user exit 'EXIT_SAPMF02K_001' but this is only for checking the data on saving Vendor Master.
So I want to use FM 'SAP_WAPI_CREATE_EVENT' at right place. For that , I need User-Exit or BADI which is used for saving vendor master data.
Could anyone please help me to find out the user exit or BADI for save event of vendor master data using transaction MK01.
Looking forward to your advise and thanks in advance.
Best Regards,
Mamta

Hi ,
I forgot to activiate the project linked with User exit 'EXIT_SAPMF02K_001' .
so problem is solved now
Thanks,
Mamta

User Exit or BADI for COR1/COR2

Dear Experts,
Can you please tell me if we have any user-exit or BADI for chaning the value of the technical completion date field
i.e. AUFK-IDAT2 while saving the Process Order in COR1 or COR2?
Thanks,
Praveen

Hi Praveen,
Implement the customer exit EXIT_SAPLCOKO_006 in enhancement
PPCO0020 Process order: Display/change order header data
This is only importing one field I_AUFNR.
but try the logic below.
data: lv_fnam type char16 value '(SAPLCOKO)caufvd'.
field-symbols : <fs_caufvd> type caufvd.
your checks for changing the field IDAT2 (Technical completion date).
Try to change <fs_caufvd>-IDAT2 field value.
Regards,
Dwarakanath.S

User Exit Or Badi for Framework Release PO

Anyone could tell me about any user exit or BADI for storing the calculated value in Frameork order.
Since it is storing the GNETW in CEKKO and that is used in releasing procedure.
First of all i want to calculate the total price according to srat date and end date and then only for framework order put that value in CEKKO-KTWRT field.
Please Help and suggest some thing about this.
Thanks & Regards,
Nitin Malhotra

Hi,
Check the following PDF .
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9cd334f3-0a01-0010-d884-f56120039915
May be useful to you.
Regards
Sachin

User exit or BADI for technical closure of a maintenance order

Hello,
Please I need the help of you.
Is there any User exit or BADI for technical closure of a maintenance order
regards

Hello ROB,
Please do not post duplicate thread.
You can check below two BADI's. ATP_PUBLISH_RESULTS and IWO1_SCREEN_MODIFY. Because I have got two BADI's through finder.
You can also check WO10004, WO10005, WO10006, WO10007, WO10008, WO10009, WO10010 and WO10011 user exits.
Thanks & Regards,
Abhijit

User Exit or BADI for MIGO on entry of inbound delivery number

Similar Messages

Maybe you are looking for