Requirement in conversion of material master data

i have a requirement in conversion of material master data, what do i need to do in this, do i need to use the LSMW or BDC for this scenario can any one help me in this issue.

Hi Rocky,
You can go for either of these two methods.Conversion in the sense you are going to create one upload program for MM01 and will upload the data using the program
But I suggest go for BDC.Because in LSMW you can not capture all the views for material master.
I am writing steps(BDC recording) for this.Just follow if helpful:
1.Go to SHDB t-code.
2.Press NEW RECORDING
3.enter recording name,Transaction code(MM01) and then press Start recording.
This will take you to the transaction MM01,please enter the test data given by your functional consultant.Also select the views that required by client.
4.After recording save it.
5.After saving press program button from the menu.
6.This will take you SE38 with the recording code.
7.Then you do as per normal BDC program,declare internal table and map with the uploaded fields.
Shout me for further clarification.
Reward if helpful.
Thank you.

Similar Messages

MATERIAL MASTER DATA UPLOADING THROUGH LSMW

Hi.
I am new to lsmw.
we have a requirement to upload the material master data through LSMW,.
the data is on Excel sheet on the Desktop of the system.
Can any body help me to upload the Material Master data, procedure in step wise.
Thanks in advance,
regards,
Eswar.M

Hi Venkat,
Go through the following Steps
Using Tcode MM01 -- Maintain the source fields are
1) mara-amtnr char(18)
2) mara-mbrsh char(1)
3) mara-mtart char(4)
4) makt-maktx char(40)
5) mara-meins char(3)
the flate file format is like this as follows
MAT991,C,COUP,Srinivas material01,Kg
MAT992,C,COUP,Srinivas material02,Kg
AMT993,C,COUP,Srinivas material03,Kg
MAT994,C,COUP,Srinivas material04,Kg
MAT995,C,COUP,Srinivas material05,Kg
goto Tcode LSMW
give Project Name
     Subproject Name
     object Name
Press Enter -
Press Execute Button
It gives 13 radio-Button Options
do the following 13 steps as follows
1) select radio-Button 1 and execute
   Maintain Object Attributes
select Standard Batch/Direct Input
   give Object -- 0020
       Method -- 0000
   save & Come Back
2) select radio-Button 2 and execute
   Maintain Source Structures
   select the source structure and got to click on create button
   give source structure name & Description
   save & Come Back
3) select radio-Button 3 and execute
   Maintain Source Fields
   select the source structure and click on create button
   give
   first field
        field name    matnr
        Field Label   material Number
        Field Length 18
        Field Type    C
   Second field
        field name    mbrsh
        Field Label   Industrial Sector
        Field Length 1
        Field Type    C
   Third field
        field name    mtart
        Field Label   material type
        Field Length 4
        Field Type    C
   fourth field
        field name    maktx
        Field Label   material description
        Field Length 40
        Field Type    C
   fifth field
        field name    meins
        Field Label   base unit of measurement
        Field Length 3
        Field Type    C
save & come back
4) select radio-Button 4 and execute
   Maintain Structure Relations
   go to blue lines
      select first blue line and click on create relationship button
      select Second blue line and click on create relationship button
      select Third blue line and click on create relationship button
save & come back
5) select radio-Button 5 and execute
   Maintain Field Mapping and Conversion Rules
   Select the Tcode and click on Rule button there you will select constant
   and press continue button
   give Transaction Code : MM01 and press Enter
   after that
   1) select MATNR field click on Source filed(this is the field mapping) select MATNR and press Enter
   2) select MBRSH field click on Source filed(this is the field mapping) select MBRSH and press Enter
   3) select MTART field click on Source filed(this is the field mapping) select MTART and press Enter
   4) select MAKTX field click on Source filed(this is the field mapping) select MAKTX and press Enter
   5) select MEINS field click on Source filed(this is the field mapping) select MEINS and press Enter
finally
save & come back
6) select radio-Button 6 and execute
   Maintain Fixed Values, Translations, User-Defined Routines
   Create FIXED VALUE Name & Description as MM01
   Create Translations Name & Description as MM01
   Create User-Defined Routines Name & Description as MM01
   after that delete all the above three just created in the 6th step
   FIXED VALUE --MM01
   Translations --MM01
   User-Defined Routines --MM01
   come back
7) select radio-Button 7 and execute
   Specify Files
   select On the PC (Frontend) -- and click on Create button(f5)
                                  give the path of the file like "c:\material_data.xls"
                                  description : -
                                  separators as select tab radiao- button
   and press enter   save & come back
8) select radio-Button 8 and execute
   Assign Files
   Save & come back
9) select radio-Button 9 and execute
   Read Files
   Execute
   come back
   come back
10) select radio-Button 10 and execute
    Display Imported Data
    Execute and press enter
    come back
    Come back
11) select radio-Button 11 and execute
    Convert Data
    Execute
    come back
    Come back
12) select radio-Button 12 and execute
    Display Converted Data
    Execute & come back
13) select radio-Button 13 and execute
    Start Direct Input Program
   select the Program
   select continue button
go with via physical file
give the lock mode as 'E'
and execute
Regards
Sreeni

Material Master Data and PO Master Data Table

Dear SAP Gurus and Expert,
Currently user is having a new integration system which link to SAP, and they require the migration of Material MAster Data and PO master data.
As a result of that, what table can be accessed in SE16 in order to get all the material master data and PO master data to be exported to excel fil format.
Thank you
Regards

Hi,
For material master data
MARA                           General Material Data
MARC                           Plant Data for Material
MAKT                           Material Descriptions
MARD                           Storage Location Data for Material
You can enter MA* in SE16 and press F4 too get all the tables according to the views.
For Purchase order
EKKO
EKPO
EKBE
EKKN
Search for EK* in SE16.

MATERIAL MASTER DATA UPLOADING BY LSMW

Hi.
I am new to lsmw.
we have a requirement to upload the material master data through LSMW,.
the data is on Excel sheet on the Desktop of the system.
Can any body help me to upload the Material Master data, procedure in step wise.
Thanks in advance,
regards,
Eswar.M

http://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary

Can anyone Explain about Data conversion for Material master In SAP MM

Can anyone Explain about Data conversion for Material master, Vendor In SAP MM
Thanks

Hi,
Refer following link;
[Data Migration Methodology|http://christian.bergeron.voila.net/DC_Guide/Data_Migration_Methodology_for_SAP_V01a.doc]

Material master data complete in bi - infoset or multiprovider

Hi all.
for one of the reporting requirement of my client i need to extract the complete material master data in BI - from MARA, MARC, MARD, MSTLB tabls.
which i have done and stored in the infoobjects - 0MATERIAL, 0MAT_ST_LOC, 0MAT_PLANT, 0MAT_SALES.
now user want to see all the information against each material in 1 single line the multiple lines will only come in when there is plant.
which approach i shoul go for this scenario.
infoset or multiprovider.
i created infoset by using inner join but then i see only common materials, left outer join is giving me problems.like -
Invalid or missing ON condition for left outer join (0MAT_PLANT)
Invalid or missing ON condition for left outer join (0MAT_ST_LOC)
Invalid ON condition for left outer join (0MATERIAL)
kindly give your suggesstions on this.
thanks
dipika

Hello,
There are restrictions regarding left outer join in infoset:
If a left outer join is used, the following restriction applies to the right table (right operand):
·        Only join conditions with exactly one other table can be defined and
·        This table in turn cannot be a right table (right operand) of a left outer join.
Tables connected with left outer joins always form the end of a chain of tables. In this way, as many tables as you want can be linked in an InfoSet with a left outer join to a core of tables that are connected using inner joins.
The restrictions on the definition of left outer joins are due to the technical limitations of databases. These restrictions do not apply to inner joins.
http://help.sap.com/saphelp_nw2004s/helpdata/EN/67/7e4b3eaf72561ee10000000a114084/content.htm
http://help.sap.com/saphelp_banking60/helpdata/ru/a3/96663bd194a978e10000000a11402f/content.htm
BR
Ondrej

Runtime error while creating material master data

hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..

SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

ALE:Material Master Data Distribution

Hi
I am new to ALE Material Master Data Distribution and if the questions are incorrectly worded, please accept my apologies. It is due to lack of knowledge.
I am doing Material Master Data distribution and I am using standard basic type MATMAS03. The standard TCode MM01, MM02 has SAP tables and 3 custom tables.
I have turned the active on using BD61 and change pointers to message type.
Q: Is the change pointer, applicable to entire material master? i.e. if I change a field in Z table or standard material tables, can an IDOC be created for the entire material record?
Q: What is the function of BD52? Does this override the option Activate Change pointers for message type? Does it mean, if the changes are made to those fields in BD52 a change pointer is created?
Q: If I change Z table only, will there be a change pointer created? If not, how could I accomplish this using BD52.
Q When do we use the enhancement MGV00001?
Also, If you could add anything in addition to above queries, it will be helpful to me and I appreciate it.
With regards,
William

Thank you Sudhakar.
Your tips are good, but, I was not able to get the problem resolved.
Let me explain what I have done based on your tips.
1. MATMAS uses MATMAS03. The basic type has NOT been modified to have z fields yet.
2. Using BD52, i have created the following fields
MATERIAL ZEMM_MARA_TECH IM_ADVISORY_CODE
MATERIAL ZEMM_MARA_TECH KEY.
3. Modified the MMR for IM_ADVISORY_CODE.
I did not see a change pointer for this change.
Q: When I created above entry using BD52, was asking the table name. The table name is stored in TCD0B. What TCode is available the entries in TCDOB. For the time being, i created using SQL.
Q. Is there a follow up configuration required to capture the changes?
I will award the points in a couple of days time, even if I do not get the solution, because you have spent your precious time for the community. I will wait for a couple of days for other suggestions and close the Problem.

Multiple group - single material master data

Dear friends ,
I am doing material master data as follows.
Ex. Water Bottle - Material Group - may be (Aqua) or (Bislary) or (Saiganga) or (Balley).
means when i will make material master it will become 4 material master with 4 group as bellow.
1) Water bottel-Aqua
2 )water bottle-Bislary
3 )Water bottle-Saiganga
4) Water bottle-Balley.
By my requirement is that it should be only one material master code , with facility of 4 material group.
Whatever i need i will select at the time of PO.
Regards,
Mahesh.

Hi,
You just go for single material code creation as WATERBOTTLE and then as you needed, you can go for Split Valuation where same material WATERBOTTLE at a plant can have different stock quantity and value for different groupings {(Aqua) or (Bislary) or (Saiganga) or (Balley)}
http://www.sap123.com/a/29/#split-valuation
OR
Go for Batch Management where you are just subdividing the material WATERBOTTLE according to the characteristics{(Aqua) or (Bislary) or (Saiganga) or (Balley)}
https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Management
Regards,
Biju K

MDM Material Master data creation using Guided Procedures

Well, i searched a lot on the forums but didnt get any thing.
My requirement is to use MDM Java APIs for creating material master data using Guided Procedures. However, i got one nice document "[How to create master data centrally using guided procedure|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92811997-0d01-0010-9584-f7d535177831]". This doc discuss about business partner creation and also have a link to downloadable file. But now when i click on this download link, it says download expired !
Can anyone please post a valid link to these deployable files?
Or anyone could post some usefull materail or links on the above mentioned requirement?
Kindly reply, any help will be highly appreciated.
Regards,
Ameya
Edited by: Ameya Pimpalgaonkar on Sep 27, 2008 11:29 AM

Wow, that was indeed a quick reply i have ever got on SDN. Thanks for the excellent link jitesh. However, where will i get the deployable files that it selects in the Import GP/CAF contents step of the demo? those are the webdynpro components files. One is SCA and other is SDA. Where will i get them?
Kindly post the link to those files if u have them or else send it across.
Regards,
Ameya
Edited by: Ameya Pimpalgaonkar on Sep 27, 2008 11:53 AM

Redoing the Intial load of Material Master data

Hi,
The requirement is to flow the data between R3 and CRM.Business partners, Material and Sales documents.
I have created Customer and Material in R3 and in CRM r3ac1 i set filter conditions for material and customer .
Data successfully flowed from R3 to CRM this is confirmed in CRM (SMQ2) when i activated it showed a green light.
I used tcode COMMPR01 in SD tab it is not showing particular sales org 5030.
For BP it shows sysfail in SMQ2 when i tried to check it shows message BP number already exists.
Iam doing the Intiaload of Material Master data second time .so what precautions i have to take before starting the Intial Load .
Plz Clarify.
Thanx's in Advance.
Regards,
Jack.

HI Jack,
Regarding the customers:
You could be getting the message due to a variety of resons. Perhaps you are using overlapping BP number ranges in CRM and R/3?
The other reason could be due to client copies in one or both systems thus leading to data flowing to the wrong clients.
Regarding Materials:
Make sure that that org mapping has been correctly maintained in the CRM Org Model and that this org unit has not been filtered out in the fitler settings.
If the mapping exists correctly, then you will see a BDOC with an error. You will also see the sent data in the BDOC.
This is easy to check. Just change a Sales Area dependent attribute for a material in R/3 and see if the change is sent to CRM. If yes, then check the BDOC and the BDOC log. If the problem is in the org Mapping this will show up in the BDOC Log.
Another thing you can check is the buffer. Perhaps the cache/buffer is not getting updated after the download.
Regards,
Shiv

Material Master Data load failed

Hi All,
I am loading material master data. I have around 8055 records in R/3. The load has failed with an error "Non-updated Idocs found in Business Information Warehouse" and asking me to process the IDocs manually. I have checked in WE05 for the IDocs and found 3 Idocs with status 64(IDoc ready to be transferred to application).
But when I checked in the manage screen of the 0MATERIAL I could find the Transfered and Updated records as 8055. I have even checked the data in 0MATERIAL and found that all the data(8055 records) has already been uploaded.
Why is it still showing an error(load failed) even when all the data has been uploaded? What should I do now?
Best Regards,
Nene.

hi Nene/Sankar,
for material text no language please check Note 546346 - Material texts: no selection on languages
and for why idocs problem, check e.g Note 561880 - Requests hang because IDocs are not processed, Note 555229 - IDocs hang in status 64 for tRFC with immediate processing.
hope this helps.
Note 546346 - Material texts: no selection on languages
Summary
Symptom
When loading material texts from R/3 into the Business Information Warehouse, you cannot select languages.
Other terms
DataSource, 0MATERIAL_TEXT, InfoSource, InfoObject, 0MATERIAL, SPRAS, LANGU, 0LANGU, MAT_BW, extraction, selection field, delta extraction, ALE, delta, change pointer
Reason and Prerequisites
As of PI/PI-A 2001_2 Support Package 6, the selection option for the 'SPRAS' field in the OLTP system was undone in the 0MATERIAL_TEXT DataSource. (Refer here to note 505952).
Solution
As of PI/PI-A 2002_1 Support Package 4, the 'SPRAS' field is provided for selection again with the 0MATERIAL_TEXT DataSource in the OLTP system. When loading the material texts from BW, the language is still not provided for selection in the scheduler, instead all languages of the language vector in BW are implicitly requested from the source system. However, during the delta update in the source system, the change pointers for all languages in the source system are now set to processed, regardless of whether the language was requested by BW or not.
Import
Support Package 4 for PI/PI-A 2002_1_31I - PI/PI-A 2002_1_45B
Support Package 4 for PI 2002_1_46B - PI 2002_1_46C
Support Package 3 for PI 2002_1_470
In transaction RSA5, copy the D version of the 0MATERIAL_TEXT DataSource to the A version.
Then replicate the DataSources for 0MATERIAL in the BW system. The 'SPRAS' field is then flagged again as a selection field in the transfer structure of the 0MATERIAL InfoSource. The transfer rules remain unchanged. Activate the transfer rules and perform a delta initialization again.
Note 561880 - Requests hang because IDocs are not processed
Symptom
Data extraction in a BW or SEM BW system from an external OLTP System (such as R/3) or an internal (via DataMart) OLTP System hangs with the 'Yellow' status in the load monitor.
After a timeout, the request status finally switches to 'Red'.
Information IDocs with the status '64' are displayed in the 'Detail' tab.
Other terms
IDoc, tRFC, ALE, status 64
Reason and Prerequisites
Status information on load requests is transferred in the form of IDocs.
IDocs are processed in the BW ALE model using tRFC in online work processes (DIA).
IDoc types for BW (RSINFO, RSRQST, RSSEND) are processed immediately.
If no free online work process is available, the IDocs remain and must then be restarted to transfer the request information.With the conversion to asynchronous processing, it can often happen that no DIA is available for tRFC for a short period of time (see note 535172).
The IDoc status 64 can be caused by other factors such as a rollback in the application updating the IDocs. See the relevant notes.
Furthermore, you can also display these IDocs after the solution mentioned below, however, this is only intended as information.
You must therefore analyze the status text.
Solution
We recommend asynchronous processing for Business Warehouse.
To do this, you need the corrections from note 535172 as well as note 555229 or the relevant Support Packages.
The "BATCHJOB" entry in the TEDEF table mentioned in note 555229 is generated automatically in the BW system when you import Support Package 08 for BW 3.0B (Support Package 2 for 3.1 Content).For other releases and Support Package levels, you must manually implement the entry via transaction SE16.
Depending on the Basis Support Package imported, you may also have to implement the source code corrections from note 555229.
The following basic recommendations apply in avoiding bottlenecks in the dialog processing and checking of IDocs for BW:
1. Make sure there is always sufficient DIA, that is, at least 1 DIA more than all other work processes altogether, for example, 8 DIA for a total of 15 work processes (see also note 74141).
TIP: 2 UPD process are sufficient in BW, BW does not need any UP2.
2. Unprocessed Info IDocs should be processed manually within the request in BW;in the 'Detail' tab, you can start each IDoc again by selecting 'Update manually' (right mouse button).
3. Use BD87 to check the system daily (or whenever a problem arises) for IDocs that have not yet been processed and reactivate if necessary.
However, make sure beforehand that these IDocs can actually be assigned to the current status of requests.
TIP: Also check transaction SM58 for problematic tRFC entries.
IMPORTANT: Notes 535172, 555229 and the above recommendations are relevant (unless otherwise specified) both for BW and for SAP source systems.

Material Master Data Reporting with SAP BW?

Hello,
I have a question regarding the use of a SAP BW System. Do you guys think SAP BW is a appropriate System for modelling and analysing Queries for the Material master data of the R/3 System.
Focus:
Material master data
Bill of Material
Material Classification System
Iu2019m not sure if Infocubes are the right way to report such kind of requirement. I mean Infocubes always requires key figures and dates but the material master data are mainly characteristics. Can someone give me some advice?
Thanks & Greetings

Hi,
I'd say yes. You can aalo use InfoObejct and DSO (like Tables) as well as InfoSets (Join ability).
Masteer Data and BoM shouldn't be a problem.
Material Classification System is always a bit tricky. Standard Class extractors are not able to extract multiple classifcations. There will be need of some Programming due to the poor standard solution.
I suppose some 10 - 15 days till it's finished an productive.
hth
cheers
Sven

Material master data load

Hi all,
I am new to loading master data, i have searched forum still getting more confusion, My requirment like material master
data load i like to know what data source have to use and how to load into target, please guide me step by step.
thank u

hello there,
lets first define what you want, e.g. attribute, text or hierarchy, it can be all 3 as well.
if you want attribute for material master data you can use 0MATERIAL_ATTR
for text you can use 0MATERIAL_TEXT and for hierarchy you can use 0MATERIAL_HIER
all material master data goes into infoobject 0MATERIAL. good luck and feedback if you need further assistance.

Material master data maintenance strategy

Hi,
We are working on a global template to suggest Material master data maintenance strategy.
Please suggest what could be various options for same.
Regards,
Avnish

Hello,
In the same situation now:
1. Suggestion is to load the Basic Data centrally, say from HQ
2. Other data can be loaded via the subsidiary in the different countries.
3. If required you can use a block or a material statu and have the HQ control the access to the other parts of the material master.
For your information, we have come across a big issue regarding this and only now we have begun the above method as my client's HQ controls the release of materials into the market.
Regards
Waza

Requirement in conversion of material master data

Similar Messages

Maybe you are looking for