Requirement related to User Defined Fields

Hi All,
I have a requirement wherein I want 5 UDF (User Defined Fields) to be displayed in Create User Form. However, In the View User Profile, I want to have a total of
10 UDF to be displayed (5 more UDF in addition to UDF's used in Create User Form). The value of these 5 new UDF will come from some other resource ( a
webservice will return the value of these new 5 UDF) and in the Update User Form, I want to have only 5 UDF to be displayed (same 5 UDF's that are used in
Create User Form).
So, need your inputs on whether this can be achieved through OOTB OIM Configuration or it will require Customization (OIM Api's or jsp customization)?
Regards,
Sunny Ajmera

Hi,
You want to say you have total 10UDFs; 5 you will show on the create user page while on user profile page you want to show all 10UDFs.
Is it right???
Then you have to go for jsp customization.
But you can do one thing by ootb; show all the 10UDFs on the create user make 5 editable in which you want to give any value and make rest 5 as read only.
You have two options choose what suit best to you.
Regards
Alabhya Goel

Similar Messages

Addition of user defined fields in Results Recording screen (QE01)

HI All,
We've a business requirement to add user defined fields in results recording screen (Character Overview screen - QE01), so that the user will enter data in user defined fields during results recording. and the data entered in user defined fields should be saved in data base table along with actual results given by the user in order to retrieve data for reporting purpose.
Please suggest valuable solutions to acheive the requirement.
Thanks & regards,
rajesh

Hi Sujit,
Thanks for your reply,
We've tried using the " QEEM0029 User-Exit for Characteristic Overview Subscreen , however with "QEEM0029" exit, we are only able to add fields to the characteristics overview screen and there is no provision in this exit to save the data entered in the user fields to a table (QALS,QAMR, QASE).
Please suggest!
Thanks & regards,
rajesh

Error -5002 when adding linked user defined field using DI API

Hello,
When I try to add a linked user defined field using DI API I get the error number -5002 with description:
"The field 'Related Table' should consist of 8 alphanumeric characters with no valid or default values"
I Get the error when I use the Add method.
What is the solution for this problem? I use SBO 2005 A SP1 Patch 18
The code I use is (.NET C# 2.0):
SAPbobsCOM.IUserFieldsMD uf = (SAPbobsCOM.IUserFieldsMD)company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields);
uf.Name = "S_BUCO";
uf.TableName = "OPOR";
uf.Type = SAPbobsCOM.BoFieldTypes.db_Memo;
uf.SubType = SAPbobsCOM.BoFldSubTypes.st_Link;
uf.LinkedTable = "S_BU";
uf.Description = "Description";
uf.Add()
Regards,
Jeffrey

Hi Jeffrey,
Your code above does not match the settings you are using in the UI. In particular, the type and subtype you are setting in code are not correct.
To create the UDF via code, set the field types as follows:
SAPbobsCOM.IUserFieldsMD uf = (SAPbobsCOM.IUserFieldsMD)company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields);
uf.Name = "S_BUCO";
uf.TableName = "OPOR";
uf.Type = SAPbobsCOM.BoFieldTypes.db_Alpha;
uf.EditSize = 8;
uf.LinkedTable = "S_BU";
uf.Description = "Description";
uf.Add()
There's no need to set the SubType property as you require a regular alphanumeric field.
Kind Regards,
Owen

Confirmation of User defined fields on CO11N

Dear All,
Can anybody tell me how to confirm user defined field during operation confirmation of an order. I have created a user field key and assigned in the operation detail screen in routing. Is it required to include a freely defined screen for CO11N in customizing or any other setting is there.
Thanks in advance for your valuable inputs.
Regards,
Uday Parchure

<b>Define Customer-Specific Detail Areas for Single Screen Entry</b>The following enhancement is available for production orders:
CONFPP07 define detail areas for single screen entry
With this enhancement you can define your own detail areas (screens), which can be issued for single screen entry of time ticket confirmations.
Enhancement CONFPP07 contains the following enhancement components:
Function module exits
EXIT_SAPLCORU_S_100 Transfer data from SAPLCORU_S to customer-defined screen
EXIT_SAPLCORU_S_101 Return data from customer-defined screen to SAPLCORU_S
Display documentation
Screen areas
Screen areas that you can define yourself are available.
Activities
1. Create the enhancement
To do so, create a new project, or use an existing project.
2. Activate the project.
Your enehancement only takes effect after you have activated it.
Further Notes
Enhancememnts, as opposed to modifications, are fundamentally independent of releases since they are not made in the SAP original, but in a name space that is reserved for customers.
you have to create a customer defined screen and attach as in the link. Add the Freely definable detail screen in OPK0. Confirm the user defined fields.
Regards
MSR
Message was edited by:
Soundararajan Murugesan
Message was edited by:
Soundararajan Murugesan

User defined field in SD and its link to Value field in COPA (??)

Dear All,
We have created one "Z" field i.e. user defined field and its in VBRP Table. This is a quantity field. to update the values in this field we have used an exit in sales and distribution module. Now, by defining this exit values are correctly populated in VPRP table on line item basis.
Requirement here is we need to get this field in COPA, for same i have carried out the quantity field assignment to value field (KE4M).
Even after this configuration profitability segment is not updated.
Regards,
Sayujya
Edited by: sayu on Mar 15, 2010 10:13 AM

In the past I did something similar and had to use function module EXIT_SAPLKEAB_001 in enhancement COPA0002 to populate the field. To use this exit you'll first need to add a user exit id to your valuation strategy (transaction KE4U). The help on the function module is pretty good, but if you run into a problem let me know.
thanks,

Use of user define field in Task list

Hi,
Please give the solution for the strange requirement of the client as:
My client wants to define the operation for preventive maintenace in two parts like
check temperature : 45 deg celcius.
check temperature should be like operation and rest what he has to check to be defined in other field i.e. both should not be together.
so i find the solution as user defined fields in the task list where i can define this second parameter.
But the problem is that system is not proposing this second field in the preventive order, only operation field is proposed.
Please suggest some solution, how can this requirement can be mapped.

Both operations of the inspection lot will need to be completed at some point. They are in the same lot so they belong together. Both operations should be available to the user. (Unless you used workcenters and security to limit users to specific workcenters).
Once set up, it will only be available to new inspection lots. Few things in SAP are retroactive.
Craig

Want to add a prepopulated User defined field in create user form

Hi,
I have an entity adapter which will perform a pre-insert check on the user group of the user logged in to the oim.
If the logged in user belongs to a group say "IT ADMIN", another validation check will be imposed on the create user action performed by him.
If not from "IT ADMIN" group then create user action will be handled normally.
Now the catch is, how would I determine the group name of the user logged in from the adapter code I have written?
I decided to keep an User defined field "Created by" in the create user form which will be non-editable and auto-prepopulated with the group name of the logged in user. This way I will be able to map the variable field from the User definition drop down list while mapping the adapter variables.
May you please guide me how I can achieve this?
Would highly appreciate suggestion/inputs.

Thanks for all your replies!
However I am still in dark.
I tried to retrieve the groupname using tcUSerOperationsIntf. But iit tries to retrieve the group name of the user getting created.
Please note, the group name I want is not of the user yet to get created, but that of the user creating it i.e., the logged in user.
My requirement is to have this created_by field in the create user form already prepopulated with the group name of the logged in user.
So that I can put a check based on this field value in the netity adapter.
If the group is IT ADMIN then proceed with the validation.
Else no validation required.
In short, I want to know,how can I auto-prepopulate a UDF in Create USer form?

Binding a Check Box with a User Defined Field

Hi everyone,
i v created a user defined field (U_CheckPro)in the system table "OITM" with two values: Y for Yes and N for No. In relation to that i v also created a check box on the form "150" and would like to know how can i bind my checkbox with my user defined field properly.
The user would be than able to enable or disable the check box for each item (article). The user setting schould be than be active and valid in sbo-business logic, each time an item is selected. (for example in case of sales order ID 133, "OINV").
Any helfpul hints? Samples would be welcome as well.
Thanks and regards
Alban

> First of all you should remove the valid values
> because checkboxes does not work with valid values...
> Just give a default value.
Hi Rasmus,
thank you very much for your helpful hint. I guess my problem is solved by that - nevertheless here is my complete code sequence once again in case of possible errors.
I would appreciate any additional suggestion for improvement of the same.
Thanks and regards
Alban
>>>
Private Sub AddItem()
        ' Test UserSource
        oForm.DataSources.UserDataSources.Add("U_CheckPro", SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 1)
        oItem = oForm.Items.Item("122")
        ' Adding a Static Text item
        oNewItem = oForm.Items.Add("StaticTxt2", SAPbouiCOM.BoFormItemTypes.it_STATIC)
        oNewItem.Left = oItem.Left + 20
        oNewItem.Width = 100
        oNewItem.Top = oItem.Top + 12
        oNewItem.Height = 25
        oNewItem.FromPane = oItem.FromPane
        oNewItem.ToPane = oItem.ToPane
        oNewItem.LinkTo = "CheckBox1"
        oStaticText = oNewItem.Specific
        oStaticText.Caption = "Test_Caption"
        ' Adding a Check Box item
        oNewItem = oForm.Items.Add("CheckBox1", SAPbouiCOM.BoFormItemTypes.it_CHECK_BOX)
        oNewItem.Left = oItem.Left
        oNewItem.Width = 20
        oNewItem.Top = oItem.Top + 15
        oNewItem.Height = 19
        oNewItem.FromPane = oItem.FromPane
        oNewItem.ToPane = oItem.ToPane
        oNewItem.DisplayDesc = False
        oCheckBox = oNewItem.Specific
        'binding check box to source
        oCheckBox.DataBind.SetBound(True, "OITM", "U_CheckPro")
    End Sub
>>>

How to map user-defined fields in XML communication on SRM site

Hi All!
We use the External sourcing scenario and we transfer requirements from ERP in SRM through XI (PurchaseRequestERPSourcingRequest_In)
We should transfer the user-defined fields, but we can not map it in SRM site.
We have enhanced enterprise service in XI, have realized BADI PUR_SE_PRERPSOURCINGRQCO_ASYN on ERP site.
I see the XML message with ours z-fields in tr. SXI_MONITOR (into SRM), but I can not find it in BBP_PDISC.
We try to use BADI BBP_SAPXML1_IN_BADI (there is no method for SC), and BADI /SAPSRM/BD_SOA_MAPPING (z-fields is empty)
Someone can tell how to map user-defined field for SC?
Thanks in advance
Evgeny Ilchenko

Hello, Julia
We have found solution our problem
We have enhanced standard service in a new enhancement name space and defined own enhancement elements in our namespaces. Then these enhancement elements refered to the SAP standard Enterprise Service.
But In our new interfaces were different XML namespaces
When we have correct an error we could use the next BADI
on ERP site: PUR_SE_PRERPSOURCINGRQCO_ASYN
on SRM site: /SAPSRM/BD_SOA_MAPPING
BR,
Evgeny

Not found Users Form in User Defined Field Definition!!

I want to add new filed into Users form, As my subject, but when I query "Users" in User Defined Field Definition, no result return, just exist Orgnizations, Roles, Resource Objects,Structure Utility.
FYI, OIM Version: oim 11g
Thanks,
Edited by: 793495 on 2010-10-11 上午2:53

this you can find in Web console
configuration>>user configuration>>action>>attributes
I am able to add attribute but not able to make field as mandatory,while creating attribute we are not getting option like that you want this field mandatory or not but while modifying the attribute we are getting option like required field radio button if i select that i am getting error "you cant change an attribute to required unless all the user have value for this field"

How to use User Options and User-Defined Fields in DC Group function?

Dears,
As title, when should I use above fields? I did not see the related information in SAPME help library.
Thanks!

The user options fields are just information fields you can store at the Data Collection Maintenance activity. You can think of these as extra information fields for storage purposes only. I can't give you a use case except to say 'information fields' only.
With regards to the User-Defined fields in DC Group - you can think of these as extra data fields to be collected. They will appear immediately underneath the data parameter they are defined in in the DC Plug-in for the POD. They do not have limits but are just extra pieces of data you may want to collect about the specific parameter.

User-defined fields in cost calculation

Hi, I'm working with process order in customer service process.
I would like to make a cost precalculation based on a user-defined field.
To let you know.
I created a new user-defined field.
I affected to it a new parameter ID so that this user-defined field value can be used in formulas.
I created a new formula with my parameter ID.
This is allowed for costs.
Now in my work center I defined these data for costing
price for pre calculation is defined for IN9020 and cost center.
Now in my service order I fill the required field.
I would have thought that according to formula, SAP would use this value (6 PC through the formula) to calculate costs.
This is not the case.
Did anybody already use this?
Regards
Olivier

Dear Maniaba
We have used user fields in task list to capture quantity in terms of nos & its weight for each operation. This we used as a work around to capture the repair jobs quantity & tonnage. While mapping repair of a particular machine with out any reference to material(that is we have not created them as serialised material as in the case of refurbishment) we have created task list for its repair and user wanted to capture the quantity of repair (say how many & also its weight) so we have maintained the tonnage per 1 no in these fields. later when order is being created user selects the task list & changes the quantity field then we have developed report where we calculate the total tonnage of that job & also no of items repaired.
Regards
S P Behera

User Defined Fields

Hi Experts,
I have a requirment that before closing a project in system means before changing the status of a project from REL to TECO or CLSD , all user defined fields should get populated with default values.
Please let me know how to achieve this or if there is any BAPI / USER EXIT or FM for this . . . .
Thanks ,
Dhruv Kumar Malhotra

Hi,
you can make the user fields mandatory in SPRO. so at the time of exit, the user fields will get populated automatically. mark the necessary user fields which requires input.
Regards
Sankar

User Defined Fields Form

Hi Philipp,
This is in reference to ur post Dated Jan13,2005. "Opening User Defined Fields Form via API".
Is it possible for u to give a code snippet. what i'm unable to get is
- Check if i can get a handle of the UDF-Form in the Mainform Activate-Event
and
-disable the close button
Thanx in anticipation.
Manu.

Hi Manu,
Here is a code snipet where looks for the related UDF form. The FormTypeNum´s value is the same as pVal.FormType property.
Dim oUDFForm As SAPbouiCOM.Form
Try
oUDFForm = con.Forms.GetForm("-" + FormTypeNum.ToString.Trim, con.Forms.Item(FormUID).TypeCount)
Catch ex As Exception
con.ActivateMenuItem("6913")
oUDFForm = con.Forms.GetForm("-" + FormTypeNum.ToString.Trim, con.Forms.Item(FormUID).TypeCount)
End Try
The other issue is solved in your other post.
Regards,
Ibai Peñ

User defined fields for the Trading partner agreements

Hi,
Do we have any provision to create custom/user defined fields for the Trading partner agreements ?

Hello,
It would be great if you can provide complete details of your use case. I can suggest the possible way of implementation only after understanding your requirement.
Regards,
Anuj

Requirement related to User Defined Fields

Similar Messages

Maybe you are looking for